IQAN-LC5-C02
Input Devices
Catalog HY33-8405/US for North America
Catalog HY33-8405/US Electronic Control Systems
Technical data IQAN-LC5-C02 Input Devices
Application General (Lever base)
The IQAN-LC5-C02 is a large, coordinate joystick that Weight .40 kg
incorporates ruggedness, functionality, light weight, and Voltage supply 9 - 32 Vdc
has high flexibility for mobile market applications. The Current consumption 45mA @ 14VDC
unit is extremely robust, able to withstand aggressive 30mA @ 28VDC
conditions during outdoor use and in outdoor installations, CAN (ISO 11898) CAN 2.0b
including EMI, vibrations and a wide temperature range. Protocol ICP (IQAN
The IQAN-LC5-C02 features a compact ergonomic CAN Protocol)
design making it ideal for armrest and panel installations Mechanical (Lever base)
in mobile equipment. The IQAN-LC5-C02 is intended Angle of movement ±18°
to replace fourth generation IQAN-LL joystick versions. Expected life (full stroke cycles) 5 million
An adapter cable is available to allow ‘plug and play’ Lever force in neutral, XY 0.6 Nm
replacement in existing installations. Full actuated, XY direction 1.4 Nm
One time loading (max.) 100 Nm
Design and function
The mechanical life is greatly increased over previous Environmental (Lever base)
generations of joysticks. Full stroke force in any direction Temperature range
is > 100 Nm. The torsional strength has more than Operating, ambient -40 to +85° C
doubled, compared to the previous generation. Storage, ambient -40 to +100° C
Sealing (above flange) IP65
The IQAN-LC5-C02 is designed for outdoor use.
The housing is rated IP65 above the flange, and has Electrical (Lever base)
integrated Deutsch connectors. The handle cable may Addressing idTag (address 0-7
be routed completely through the main housing. This without termination)
makes field mounting of new handles or replacing a Termination idTag (address 0-7
bellow very easy to accomplish. In case of water ingress with termination)
(i.e. a damaged bellow), the built-in drainage from this
Connection
design will protect the electronics. The base material was
Electrical connection Deutsch DTM,
chosen for its non-corrosive properties.
2x 6 pos., 1x 12 pos.
All sensors are of contactless Hall effect type with dual
sensors to provide redundancy for high safety and Inputs
reliability. Voltage inputs 2
Signal range 0-5 VDC
The IQAN-LC5-C02 levers are connected to other Resolution 5 mV
modules through a CAN bus which makes data exchange Digital inputs 9(10)1
more efficient, simplifies installation and increases noise Signal high >4 VDC
immunity. The high number of inputs makes the base an Signal low <= 1 VDC
excellent input module for external signals.
Outputs
The joystick has a heavy duty stem and tough base Digital output (1)1
material for long life. The precise force configuration Type high side switch
makes it easy to feel X and Y direction. The wide Max load 200 mA
operating voltage range allows the IQAN-LC5-C02 to
connect to both 12 VDC and 24 VDC systems. All inputs
and outputs are protected against short circuit to ground
and to main power supply. LED indicators show supply 1) Channel is defined using IQAN software.
voltage and internal operation.
The IQAN-LC5-C02 is made using selected components
and conforms to strict international requirements.
2 Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, Manitoba, Canada
Catalog HY33-8405/US Electronic Control Systems
Technical data IQAN-LC5-C02 Input Devices
N handle General (handle)
The N handle option provides a variety of control Weight .17 kg
interfaces in an ergonomic, multi-function handle that Temperature range -40 to +85° C
comfortably fits your hand. The handle is designed for Sealing IP44
operations where a firmer control grip is desired. The Buttons/Trigger switches
ergonomic design gives good support to the arms and Expected life (mechanical) 5 million
wrists and assures a comfortable grip from several Expected life (electrical) 0.2 million min.
angles. The compact design allows operators to quickly Travel 0.6 mm
become familiar with the joystick. The handle has Actuating force 2 Nm
the capability to have a maximum of 4 buttons in the Sealing IP65
faceplate. The N handles are offered to replace previous
IQAN-LL joystick versions, which used the N handle. N standard configurations
Design and function
1 2 1 2
The N handle is made to fit either the right or left hand,
3 4
reducing inventory part numbers. The options are flexible
and include combinations of buttons, and trigger to satisfy
a variety of operator interface requirements.
The N handle itself is not sealed and is recommended
for in-cab use. The button switches are sealed, with
gold contacts, which makes the handle satisfactory
for applications in off-road equipment. The cable is N2/N2T N4/N4T
routed completely through the base housing making
field mounting of new handles very easy to accomplish.
Connection of the handle functions is simple to
accomplish by plugging the handle cable connector into
the receptacle in the IQAN-LC5-C02 base.
No Trigger Trigger
3 Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, Manitoba, Canada
Catalog HY33-8405/US Electronic Control Systems
Technical data IQAN-LC5-C02 Input Devices
Model code
IQAN - LC5 - C02 -
Code Description Code Description Code Description
L lever C02 repl. IQAN-LL U1 no handle, without bellow
C co-ordinate U2 no handle, with bellow, Ø40mm [Ø1.57”]
5 fifth generation U3 no handle, with bellow, Ø10mm [Ø.39”]
N2 N handle, 2 buttons
N2E N handle, 2 buttons (E2 replacement)
N2T N handle, 2 buttons + trigger button
N4 N handle, 4 buttons
N4T* N handle, 4 buttons + trigger button
* this handle option uses pins from the C2 (12 pos. Deutsch DTM)
connector, which are typically reserved for external signals.
Ordering part numbers (base only) Ordering part numbers
IQAN-LC5-C02-U1 20076333 IQAN-LC5-C02-N2 20077690
IQAN-LC5-C02-U2 20076334 IQAN-LC5-C02-N2E 20077686
IQAN-LC5-C02-U3 (A06) 20077644 IQAN-LC5-C02-N2T 20077685
IQAN-LC5-C02-N4 20077688
IQAN-LC5-C02-N4T 20077687
Ordering part numbers (acc.)
LC5 to -LL adapter cable 2830018
4 Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, Manitoba, Canada
Catalog HY33-8405/US Electronic Control Systems
Technical data IQAN-LC5-C02 Input Devices
80
(Ø 108)
Alternative mounting holes
80
M12 x 1.25
Ø 6 (8x) 10
28
105
12
stem detail
49
90
105
units=mm
IQAN-LC5-C02 to IQAN-LL adapter cable
5 Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, Manitoba, Canada
Catalog HY33-8405/US Electronic Control Systems
Technical data IQAN-LC5-C02 Input Devices
80
(Ø 108)
Alternative mounting holes
80
Ø 6 (8x)
240
49
90 105
units=mm
6 Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, Manitoba, Canada
Catalog HY33-8405/US Electronic Control Systems
Technical data IQAN-LC5-C02 Input Devices
Environmental Protection
EMI
ISO 13766/ISO 14982 (radiated emission)
EN 55025:2003 (conducted emission)
ISO 11452-4:2005 (conducted susceptibility)
ISO 11452-2:2004 (radiated susceptibility)
ISO 7637-3:2007 (immunity vs supply transients)
ISO 7637-2:2004 (conducted transient susceptibility)
ESD
ISO 10605:2001, (Handling)
Climate Environment
IEC 60529:2001 IP65 (water)1
IEC 60068-2-78:2001 (damp heat, steady state)
IEC 60068-2-30:1985 Db (var1,damp,cyclic)
IEC 60068-2-14:1984 Nb (change of temp.)
IEC 60068-2-2:1993 Bb (dry heat)
IEC 60068-2-1:1993 Ab (cold)
Mechanical
IEC 60068-2-29:1987 Eb (bump)
IEC 60068-2-64:1993 Fh, Fh (random vibration)
Chemical environment
IEC 60068-2-52:1996 Kb (salt,mist,cyclic)
1) with sealed handle and bellow
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users having technical expertise. It is important that you analyze all
aspects of your application, including consequences of any failure, and review the information concerning the product or sys-
tem in the current product catalogue. Due to the variety of operating conditions and applications for these products or systems,
the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems
and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are
subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
Please contact your Parker representation for a detailed ”Offer of Sale”.
7 Parker Hannifin Corporation
Electronic Controls Division
Winnipeg, Manitoba, Canada
Sales Offices Worldwide
North America Mobile Sales Asia Pacific
Hydraulics Group Headquarters Mobile Sales Organization Asia Pacific Headquarters
6035 Parkland Boulevard and Global Sales Parker Hannifin Hong Kong Ltd
Cleveland, OH 44124-4141 USA 850 Arthur Avenue 8/F, Kin Yip Plaza
Tel: 216-896-3000 Elk Grove Village, IL 60007 USA 9 Cheung Yee Street
Fax: 216-896-4031 Tel: 847-258-6200 HK-Cheung Sha Wan, Hong Kong
Fax: 847-258-6299 Tel: 852 2428 8008
Parker Hannifin Canada Fax: 852 2425 6896
Parker Canada Division – Milton Industrial Sales
160 Chisholm Drive Milton Great Lakes Region Australia Headquarters
Ontario Canada L9T 3G9 3700 Embassy Parkway Parker Hannifin Pty Ltd.
Tel: 905-693-3000 Suite 260 9 Carrington Road
Fax: 905-876-1958 Fairlawn, OH 44333 USA Castle Hill, NSW 2154, Australia
Tel: 330-670-2680 Tel: 612 9634 7777
Mexico Fax: 612 9842 5111
Fax: 330-670-2681
Parker Hannifin de México
Av eje uno norte num 100 Southern Region China Headquarters
Parque Industrial Toluca 2000 1225 Old Alpharetta Road Parker Hannifin Motion & Control
Toluca, Mex C.P. 50100 Suite 290 (Shanghai) Co., Ltd
Tel: 52 722 2754200 Alpharetta, GA 30005 USA 280 Yunqiao Road,
Fax: 52 722 2799308 Tel: 770-619-9767 Jin Qiao Export Processing Zone
Fax: 770-619-9806 CN-Shanghai 201206, China
Europe Tel: 86 21 5031 2525
Europe Hydraulics Group Chicago Region Fax: 86 21 5834 3714
Parker Hannifin Corporation 1163 E. Ogden Avenue
Parker House Suite 705, #358 Korea Headquarters
55 Maylands Avenue Naperville, IL 60563 USA Parker Hannifin Korea Ltd
Hemel Hempstead, Herts Tel: 630-964-0796 6F Daehwa Plaza
HP2 4SJ England Fax: 866-473-9274 169 Samsung-dong, Gangnam-gu
Tel: 44 1442 458000 KR-Seoul, 135-090, Korea
Fax: 44 1442 458085 Pacific Region Tel: 82 2 559 0400
8460 Kass Drive Fax: 82 2 556 8187
Latin America Buena Park, CA 90621
Brazil Tel: 714-228-2510 South Africa
Hydraulics Division Fax: 714-228-2511 Parker Hannifin Africa Pty Ltd
Parker Hannifin Ind. e Com. Ltda Parker Place
Eastern Region 10 Berne Avenue Aeroport
Av. FredericoRitter, 1100
100 Corporate Drive P.O. Box 1153
Cachoeirinha RS, 94930-000 Brazil
Lebanon, NJ 08833 USA ZA-Kempton Park 1620,
Tel: 55 51 3470 9144
Tel: 908-236-4121 Republic of South Africa
Fax: 55 51 3470 3100
Fax: 908-236-4146 Tel: 27 11 961 0700
Chile Fax: 27 11 392 7213
Gulf Region
Parker Hannifin Chile Ltd.a
20002 Standing Cypress Drive
Av. Americo Vespucio 2760-E,
Spring, TX 77379 USA
Middle East
Conchali - Santiago, Chile Egypt
Tel: 317-519-8490
Tel: 56 2 623 1216 Parker Hannifin Corporation
Fax: 866-390-4986
Fax: 56 2 623 1421 8B Zahraa Maadi
Region 17F
Pan American Division Cairo, Egypt
7400 NW 19th Street, Suite A Tel: 20 2 519 4018
Miami, FL 33126 USA Fax: 20 2 519 0605
Tel: 305-470-8800
Fax: 305-470-8808
© 2010-2011 Parker Hannifin Corporation. All rights reserved. HY33-8405/US 06/2011
Parker Hannifin Corporation
Electronic Controls Division
1651 N. Main Street
Morton, IL 61550 USA
phone 309 266 2200
fax 309 266 6674
www.parker.com/ecd Your Local Authorized Parker Distributor
