Simulation of 796

Machine design
Date: Sunday, July 19, 2020
Designer: Solid works
Study name: Static 2
Analysis type: Static

Table of Contents
Description...........................................1
Assumptions..........................................2
Model Information..................................2
Study Properties.....................................3
Units..................................................3
Material Properties.................................4
Loads and Fixtures..................................4
Connector Definitions.....Error! Bookmark not
defined.
Description Contact Information.......Error! Bookmark not
defined.
Mesh informationError! Bookmark not defined.
Sensor Details........................................5
Resultant Forces....................................5
Beams.................................................5
Study Results........................................6
Conclusion............................................8
Appendix.............................................8

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 1

Assumptions

Model Information

Model name: Machine design

Current Configuration: Default
Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Boss-Extrude1
Mass:0.21507 kg
Volume:2.73279e-005 m^3 C:\Users\Lenovo\Documen
Solid Body Density:7870 kg/m^3 ts\Machine design.SLDPRT
Weight:2.10769 N Jul 18 00:45:09 2020

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 2

Study Properties
Study name Static 2
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SOLIDWORKS Off
Flow Simulation
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document
(C:\Users\Lenovo\Documents)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 3

Material Properties
Model Reference Properties Components
Name: AISI 1010 Steel, hot SolidBody 1(Boss-Extrude1)
rolled bar (2) (Machine design)
Model type: Linear Elastic Isotropic
Default failure Max von Mises Stress
criterion:
Yield strength: 2.5e+008 N/m^2
Tensile strength: 3.25e+008 N/m^2
Elastic modulus: 2e+011 N/m^2
Poisson's ratio: 0.3
Mass density: 7870 kg/m^3
Shear modulus: 8e+010 N/m^2
Thermal expansion 1.22e-005 /Kelvin
coefficient:

Curve Data:N/A

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 4

Loads and Fixtures
Fixture name Fixture Image Fixture Details
Entities: 1 edge(s)
Type: Fixed Geometry

Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) -0.0125885 999.997 0.0871131 999.997
Reaction Moment(N.m) 0 0 0 0

Load name Load Image Load Details

Entities: 1 face(s)
Type: Normal to selected face
Value: 2.5e+006
Units: N/m^2
Pressure-1 Phase Angle: 0
Units: deg

Sensor Details
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 5

Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -0.0125885 999.997 0.0871131 999.997

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0

Beams
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 6

Study Results

Name Type Min Max

Stress1 VON: von Mises Stress 9.461e+003N/m^2 2.629e+008N/m^2
Node: 15182 Node: 209

Machine design-Static 2-Stress-Stress1

Name Type Min Max

Displacement1 URES: Resultant Displacement 0.000e+000mm 5.732e-001mm
Node: 209 Node: 145

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 7

Name Type Min Max

Machine design-Static 2-Displacement-Displacement1

Name Type Min Max

Strain1 ESTRN: Equivalent Strain 3.814e-007 4.832e-004
Element: 5931 Element: 4840

Machine design-Static 2-Strain-Strain1

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 8

Conclusion

Appendix

Analyzed with SOLIDWORKS Simulation Simulation of Machine design 9