Scribd
Upload
72 views

Crestron® Flex Unified Communications: Pre-Deployment Checklist

Uploaded by

kenneth
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
72 views

Crestron® Flex Unified Communications: Pre-Deployment Checklist

Uploaded by

kenneth
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Crestron® Flex Unified Communications

Pre-Deployment Checklist

Complete the following tasks to ensure successful deployment of your Crestron® Flex
conferencing room solution.

Preinstallation Tasks
Prepare your intended installation space as follows.
TASK REQUIREMENT NOTES

Verify Accounts / Microsoft Teams® Rooms For Microsoft Teams Rooms accounts:
Configure Solution account credentials
Account credentials are required to log in to Microsoft Teams® Rooms.
-or- When purchasing a Crestron Flex solution for use with Microsoft
Teams Rooms, the Microsoft Teams desktop client is preinstalled on
Zoom Rooms™ account
the UC-ENGINE.
credentials
For guidelines on how to configure accounts for Microsoft Teams
Rooms, visit Configure accounts for Microsoft Teams Rooms.

For Zoom Rooms accounts:

When purchasing a Crestron Flex solution for use with Zoom Rooms,
the Zoom Rooms desktop client is preinstalled on the UC-ENGINE.

For guidelines on how to configure accounts for Zoom Rooms, visit


Setup & Configuration on the Zoom Rooms Help Center.

Confirm Two (2) Gigabit LAN Ports Ensure the installation space has two available gigabit LAN ports
Connection Points connected to the same VLAN on the same network.

Configure Network Configure your network to For Microsoft Teams Rooms accounts:
Server provide an IP address using
The UC-ENGINE and tabletop device communicate over a VLAN
DHCP.
network connection and require access to the Internet. Port 49500 is
used by default.
Note: Microsoft Teams Rooms may not be configured with a static IP address
upon initial startup.

Run the Microsoft Network Assessment Tool to confirm that your


network is properly configured. For more information, visit Evaluate
my environment on docs.microsoft.com.

For Zoom Rooms accounts:

Crestron Flex for Zoom Rooms does not require tabletop devices to
communicate with the UC-Engine directly. Each device requires
Internet access to the Zoom Cloud service.

1
Firewall Configurations
Configure your firewall to establish appropriate network communications.
TASK REQUIREMENT NOTES

Establish Open the required TCP and For Microsoft Teams Rooms accounts:
Network UDP ports.
Open TCP ports 80 and 443 and UDP ports 3478 through 3481. The
Communications
TCP ports are used to connect to Microsoft’s Online Services, such as
SharePoint™ Online, Exchange Online, and the Teams Chat services.

For more information, visit Prepare your network.

For Zoom Rooms accounts:

Open TCP ports 80, 443, 8801, and 8802. Open UDP ports 3478, 3479,
and 8801 through 8810.

For more information, visit Network Firewall or Proxy Server Settings


for Zoom and Firewall Configuration for Zoom Rooms.

For more information visit Online Help (OLH) Answer ID: 1000357, Crestron Flex Teams and Zoom Room Systems.

Original Instructions: The U.S. English version of this document is the original instructions. All other languages are a translation of the original
instructions.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents.

Certain Crestron products contain open source software.

For specific information, please visit www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or
other countries. Skype and Microsoft Teams are either trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries. Zoom Rooms is either a trademark or registered trademark of Zoom Video Communications, Inc. in the United States
and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography. All other trademarks are the property of their respective owners.

©2019 Crestron Electronics, Inc.

Doc ID 8588A
(2055016)

12/4/19

You might also like