Zero-Tail Swing

Mini-Excavator
Our new AIRMAN series operator-friendly Zero-tail 980kg 0.022m 3

swing mini-excavator, AX10u-4/AX17u-4 offer improved Total Weight Bucket Capacity

serviceability and safety, in addition to basic operations

including digging, loading, and leveling.

1770kg 0.044m 3

Total Weight Bucket Capacity

AX17u-4 AX10u-4
Supports 3-pillar canopy
ROPS/OPG (TOP guard)

Workability (AX10u-4)
- Zero-tail swing design enables the operator to work without worrying about Adjustable undercarriage width
the rear, thereby improving the efficiency of work.
- When passing through a narrow pathway or gate on the way to the job site,
the machine width can be contracted (AX10u: 780mm, AX17u: 980mm).
The machine width can be extended (AX10u: 1000mm, AX17u: 1280mm)
during operation to ensure stability. The crawler can be extended or
contracted according to the situation. 780mm

Safety 1,000mm

- Use the lock lever to lock the levers for boom, swing and travel operation,
thereby preventing improper operation.
- The machine utilizes a mechanism for starting the engine in neutral with the (AX17u-4)
lock lever in the locked position. Adjustable undercarriage width

Serviceability
- Front hoses are stored in the arm to protect them from damage. Articulated
hose is used to make it easy to replace if it is damaged.
- A fully openable engine cover has been utilized.
980mm
Operability
- Use of the hydraulic pilot makes for smooth and light operation. 1,280mm
 Dimensions Working Range
g

O
boom swings
counter-clockwise

R
N
S
L

e
P

D A

i
G.L
b

j
a

d
c
K
I

H G J
B F
E

Numeric values indicate dimensions of the machine

Specifications Outer Dimensions, Working Range equipped with a standard bucket and standard arm.

Model Model
Item Item
? Summary Specification A : Overall length in transport condition mm 2,940 3,590
Roof type 3-pillar / 2-pillar canopy B : Overall width in transport condition mm 1,000 (780) 1,280 (980)
Crawler type rubber C : Overall height in transport condition mm 1,450 2,400
? Weight and Capacity D : Overall width of swing machinery mm 780 980
Machine weight kg 980 1,770 / 1,750 E : Overall length of crawler mm 1,360 1,570
m3 0.022 0.044 F : Center distance of tumblers mm 1,040 1,210
Standard bucket capacity
B : Overall width of crawler mm 1,000 (760) 1,280 (970)
Standard bucket width mm 370 450
G : Track gauge mm 820 (580) 1,050 (740)
? Diesel Engine
H : Crawler width mm 180 230
Name Yanmar 3TNV70
I : Ground clearance mm 130 165
Type water cooling 4-cycle 3-cylinder swirl chamber type
J : Horizontal distance of blade mm 885 1,180
Displacement L 0.854
K : Blade height mm 200 260
kW/min-1 9.5/2,100 11.0/2,400
Rated output [12.9PS/2,100rpm] [15.0PS/2,400rpm] L : Blade width mm 1,000 (760) 1,280 (980)
? Hydraulic System M : Left offset mm 420 420
gear type×2 variable displacement
Hydraulic pump type (for operation) gear type×1 axial piston type×2 gear type×1 N : Right offset mm 535 650
(for operation) gear type×1
17.7 20.6 O : Right extrusion mm 220 190
Main relief setting pressure MPa
[180kgf/cm2] [210kgf/cm2]
P : Left extrusion mm 110 30
Swing hydraulic motor type internal gear type×1 Q : Swing angle to the left ° 65 70
Drive hydraulic motor type variable displacement axial piston type ×2
R : Swing angle to the right ° 55 50
? Maximum Digging Force mm
S : Tail swing radius 520 675
Bucket kN 11.8 16.0 mm
[1,200kgf] [1,630kgf] a : Max. digging radius 3,220 3,900
6.0 10.3 b : Max. digging reach at grade level mm 3,140 3,800
Arm kN
[610kgf] [1,050kgf]
c : Max. digging depth mm 1,780 2,170
? Speed d : Max. vertical wall depth mm 1,670 1,830
Drive speed (high/low) 4.0/2.0 4.3/2.4 mm
e : Max. digging height 3,010 3,560
Swing speed min-1 8.7 8.9
f : Max. dumping height mm 2,220 2,530
Gradable angle degree 30 30
g : Front minimum swing radius mm 1,310 1,610
? Undercarriage mm
h : Minimum swing radius during swing 1,100 1,320
Crawler width mm 180 230
i : Maximum blade height mm 220 285
kPa 23 28
Ground pressure [0.24kgf/cm2] [0.29kgf/cm2] j : Maximum blade depth mm 190 240
Crawler adjustment method grease cushioning spring type ? Thoroughly read the operation manual before using this machine to ensure correct and
? Others safe usage.
? Specifications and appearance are subject to change without notice.
Fuel tank capacity L 16.0 19.5 ? The photos used in this catalog were taken specifically for the catalog. When you leave
Hydraulic oil tank capacity L 14.6 (standard level 12) 20.2 (standard level 15.7) the machine, be sure to follow the instructions in the operation manual.
? Please note that for designated, non-standard colors painting will be charged separately.
Engine lubricating oil vol. L 2.8 3.1

is a registered product trademark of Hokuetsu Industries, Co., Ltd.

8TH Floor Shinjuku San-Ei Bldg, SAFETY

22-2 Nishi-Shinjuku 1-Chome,Shinjuku-ku,Tokyo 160-0023 Japan
TEL:81-3-3348-7281 FAX:81-3-3348-7289 Operate safely in accordance with
E-mail:[email protected] proper operation manual.
http://www.airman.co.jp To prevent trouble and
accidents,perform daily and
HOKUETSU INDUSTRIES EUROPE B.V. preventive maintenance checks ISO9001 : JQA-0581
Breguetlaan 12,1438 BC Oude Meer,The Netherlands ISO14001 : JQA-EM4670
without fail.
PHONE:31-20-6462636 FAX:31-20-6462191
e-mail:[email protected] No.1 AX10u-4/17u-4 07-03 I