Scribd
Upload
392 views

Wellpro Module Modbus Rtu Setup

This document provides information about various WP series ADAM modules including their channel types, supported Modbus functions codes, and register types and addresses. It explains that standard addresses refer to Modbus RTU communication addresses while bias and combination addresses may be used by some configuration software or PLC systems like Siemens. Contact information is provided at the end.

Uploaded by

Oscar Santellano
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
392 views

Wellpro Module Modbus Rtu Setup

This document provides information about various WP series ADAM modules including their channel types, supported Modbus functions codes, and register types and addresses. It explains that standard addresses refer to Modbus RTU communication addresses while bias and combination addresses may be used by some configuration software or PLC systems like Siemens. Contact information is provided at the end.

Uploaded by

Oscar Santellano
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

// - /

// / / /
https: www.wy international.com
https: www.ebay.com str tiamofaye

模块型号 通道类型 MODBUS功能码


Modbus code 寄存器类型 寄存器地址
Standard Add Bias Add Combination Add
MODEL Channel RTU Type
标准地址 偏置地址 组合地址
WP8024ADAM DI 02 1X 0-7 1-8 10001-10008
RY 01/05/15 0X 0-3 1-4 00001-00004
WP8025ADAM RY 01/05/15 0X 0-7 1-8 00001-00004
WP8026ADAM DI 02 1X 0-15 1-16 10001-10016
WP8027ADAM DO 01/05/15 0X 0-15 1-16 00001-00016
WP8028ADAM DI 02 1X 0-7 1-8 10001-10008
DO 01/05/15 0X 0-7 1-8 00001-00008
WP3066ADAM DS 03 4X 0-7 1-8 40001-40008
WP3076ADAM AO 03/06 4X 0 1 40001
WP3082ADAM AI 03 4X 0-7 1-8 40001-40008
WP3084ADAM VI 03 4X 0-7 1-8 40001-40008
AI 03 4X 0-5 1-6 40001-40006
WP9038ADAM DI 02 1X 0-7 1-8 10001-10008
DO 01/05/15 0X 0-7 1-8 00001-00008
说明：标准地址为MODBUS RTU通讯标准串口指令的地址，偏置地址为某些组态软件中使用的寄存器地址（例如力
Standard Add is the Modbus RTU communication RS232 Serial port command address
控组态软件），组合地址为某些组态软件或PLC中使用的寄存器地址（例如组态王软件及西门子PLC）
Bias Add is the configuration software use (like force config control)
Combination Add is for some configuration software and PLC use ( like Siemens PLC etc.)

// - /
// / / /
https: www.wy international.com

-
https: www.ebay.com str tiamofaye
Email: wy [email protected]

You might also like