INTERNATIONAL IEC

STANDARD 60227-1
Edition 2.2
1998-03

Edition 2:1993 consolidated with amendments 1:1995 and 2:1997

This is a free 5 page sample. Access the full version online.

Polyvinyl chloride insulated cables

of rated voltages up to and including
450/750 V –
Part 1:
General requirements

This English-language version is derived from the original

bilingual publication by leaving out all French-language
pages. Missing page numbers correspond to the French-
language pages.

Reference number
IEC 60227-1:1993+A1:1995+A2:1997(E)
 Publication numbering
As from 1 January 1997 all I EC publications are issued w ith a designation in th e
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is no w publishing consolidated versions of it s publications. For example,
edition numbers 1.0, 1.1 and 1.2 re fer, respectively, to th e base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.

Further information on IEC publications

The technical content of I EC publications is kept under con stant review by the IEC,
thus ensuring that the co ntent reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
This is a free 5 page sample. Access the full version online.

publications (see below) in a ddition to new editions, amendments and corrigenda.

Information on the sub jects under consideration and work in progress und ertaken
by the techn ical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:

• IEC Web Site (www.iec.ch)

• Catalogue of IEC publications

The on-line catalogue on t he IEC web site ( www.iec.ch/searchpub) enables y ou to
search by a variety of criteria including text searches, t echnical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.

• IEC Just Published

This summary of recently issued publications ( www.iec.ch/online_news/ justpub)
is also available by email. P lease contact the Customer Service Centre (see
below) for further information.

• Customer Service Centre

If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [email protected]
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
 INTERNATIONAL IEC
STANDARD 60227-1
Edition 2.2
1998-03

Edition 2:1993 consolidated with amendments 1:1995 and 2:1997

This is a free 5 page sample. Access the full version online.

Polyvinyl chloride insulated cables

of rated voltages up to and including
450/750 V –
Part 1:
General requirements

 IEC 1998 Copyright - all rights reserved

No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: [email protected] Web: www.iec.ch

Commission Electrotechnique Internationale PRICE CODE CJ

International Electrotechnical Com m ission
Международная Электротехническая Комиссия For price, see current catalogue
 60227-1 © IEC:1993+A.1:1995 –3–
+A.2:1997

CONTENTS

Page

FOREWORD ..................................................................................................................... 5
Clause

1 General ....................................................................................................................... 9
1.1 Scope ................................................................................................................ 9
1.2 Normative references ......................................................................................... 9
2 Definitions ................................................................................................................... 11
2.1 Definitions relating to insulating and sheathing materials .................................... 11
This is a free 5 page sample. Access the full version online.

2.2 Definitions relating to the tests ........................................................................... 11

2.3 Rated voltage..................................................................................................... 13
3 Marking....................................................................................................................... 13
3.1 Indication of origin and cable identification ......................................................... 13
3.2 Durability ........................................................................................................... 15
3.3 Legibility ............................................................................................................ 15
4 Core identification ....................................................................................................... 15
4.1 Core identification by colours ............................................................................. 15
4.2 Core identification by numbers ........................................................................... 17
5 General requirements for the construction of cables .................................................... 19
5.1 Conductors ........................................................................................................ 19
5.2 Insulation ........................................................................................................... 19
5.3 Filler .................................................................................................................. 27
5.4 Extruded inner covering ..................................................................................... 27
5.5 Sheath ............................................................................................................... 29
5.6 Tests on completed cables ................................................................................. 33
6 Guide to use of the cables ........................................................................................... 37

Annex A – Code designation .............................................................................................. 39

 60227-1 © IEC:1993+A.1:1995 –5–
+A.2:1997

INTERNATIONAL ELECTROTECHNICAL COMMISSION

–––––––––––

POLYVINYL CHLORIDE INSULATED CABLES

OF RATED VOLTAGES UP TO AND
INCLUDING 450/750 V

Part 1: General requirements

FOREWORD
This is a free 5 page sample. Access the full version online.

1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60227-1 has been prepared by subcommittee 20B: Low-voltage
cables, of IEC technical committee 20: Electric cables.

This consolidated version of IEC 60227-1 consists of the second edition (1993) [documents
20(CO)115 and 20B(CO)124], its amendment 1 (1995) [documents 20B/184/FDIS and
20B/197/RVD] and amendment 2 (1997) [documents 20B/254/FDIS and 20B/262/RVD].

The technical content is therefore identical to the base edition and its amendments and has
been prepared for user convenience.

It bears the edition number 2.2.

A vertical line shows where the base publication has been modified by amendments 1 and 2.

IEC 60227 consists of the following parts, under the general title: Polyvinyl chloride insulated
cables of rated voltages up to and including 450/750 V:
 This is a free preview. Purchase the entire publication at the link below:

IEC 60227-1 Ed. 2.2 - PDF

This is a free 5 page sample. Access the full version online.

Looking for additional Standards? Visit SAI Global Infostore

Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation

Need to speak with a Customer Service Representative - Contact Us