Technical Data Sheet

AL-JAZEERA GREEN SEMI GLOSS JA-17010

DESCRIPTION: APPLICATION TOOLS:

A high quality, semi gloss, emulsion, top coat paint ,based on pure •Airless spray:
acrylic polymer designed to provide exceptional properties. Nozzle orifice : 0.015-0.019"
RECOMMENDED USE: Nozzle pressure : 15 MPa ( 2100psi)
Spray angle : 40-600
Recomended to use for interior applications on concrete, •Air spray : Nozzle size: (1.5 – 1.8) mm.
cement, gypsum and brick surfacesas such Palaces, hotels, •Roller: Soft and smooth roller
airports, hospitals, schools, houses, etc . (Recommended type: Dekor Nardeen 8009 - code: 1093)
CHARACTERISTICS: •Brush: Suitble type.
- Outstanding hiding power. THINNER:
- Outstanding color retention property. “ Tap water”.
- Excellent smoothness and leveling.
- Easy application, no spattering. THINNING RATIO:
- Excellent adhesion.
- Ultra low VOC and extremely low odor. (0 – 10)% by volume for airless spray.
- Formulated without APEOs, formaldehyde or ammonia. (25 – 35)% by volume for air spray.
- Very good washability. (15 – 20)% by volume for roller and brush.
All above depends on the weather and application
CERTIFICATES: conditions.
- Passed VOC test at Dobi centeral laboratory (DCL). PAINTING SYSTEM:
- In accordance with the SASO standard No.: 470/ 2016.
-Apply one coat of "Al-Jazeera Green Prime" or any other
PHYSICAL CONSTANTS: suitable type of Al-Jazeera primers, depending on the
Finish Semi Gloss surface nature and let for full dry.
Colour Brilliant white and other colours as per Al-Jazeera Colour card
-Apply two coats of “Al-Jazeera Green Putty”.
Specific Gravity 1.24 ASTM D1475
Viscosity 97KU ASTM D562 -Apply two coats of “Al-Jazeera Green Semi Gloss”.
Volume Solid
D.F.T.
38 %
30 µ each coat
ASTM D2697 DRYING TIME:
Theoretical 14.6 m2/Lt. (585.46 ft2/US gallon) at D.F.T 30 µ. Surface dry 30 minutes.
Spreading Rate* Full dry 4 hours.
Pull-Off Adhesion 258 psi ASTM D7234-05 Recoating interval 8 hours. (minimum)
Scrubbility: Pass ASTM D-2486
Applicability
Within 48 hours (maximum).
(Flow & Leveling) (Brush - Roller): 8 ASTM D-7073 All above results according to ASTM D-5895..
Opacity
(Hiding Power) @150 µm: 97 ASTM D-2805 CLEANING TOOLS:
Washability pass ASTM D-4828 Tap water.
Zero EPA 24
VOC: <0.1 g/L ISO 11890-2:2013 PACKING:
*The practical spreading rate of the product depends on the
3.65 Ltr Gallon.
surface,ambient temperature,application method,actual DFT 18 Ltr Drum.
and the wasted amount. Gallon: Base 3 L.( Tintable base by coloring machine).
(To avoid waste, be sure to buy the right amount of the paint Drum: Base 17 L.( Tintable base by coloring machine).
for the required surface area).
SURFACE PREPARATION: SHELF LIFE & STORAGE:
Shelf life : 24 months @ 25 °C.
- All new surfaces shall be cured at least 28 days prior to Storage: The container should be kept in sealed, dry, cool, well
application of the primer. -ventilated place and stored in accordance with national regulations.
-Remove old paints completely from previously painted surfaces
- The substrate should have sufficient strength and free from SAFETY PRECAUTIONS:
unsounded areas, pug holes, protrusions and pops.
- Make sure that the surface is clean, dry, free from dust, oil,
Please read and follow the precautionary notices
grease, salt and mold . displayed on the container, and all caution statements on
- Fill the holes and cracks with suitable fillers such as "Al-Jazeera the MSDS of this product.
Ultimate", ”Al-Jazeera Unique Filler” or “Jaz Epoxy Crack Filler - Handle with care before and during use.
ESP” prior to application of the primer (Refer to TSD). - During application of paint, contact of liquid paint with eyes,
APPLICATION GUIDE: skin, inhalation of paint mist and paint vapour, should be
strongly avoided.
1. The required surface temperature during application, - Recommended to use the product in well-ventilated area
must not be less than 10°C; the surface moisture should not when applying the paint in insufficient ventilated areas, forced
exceed 8% and the relative humidity at work place should ventilation should be provided.
not exceed 70%. - Keep away from the reach of children.
2. pH of surface should not exceed 9. For environmental safety: please donate the leftover paint
3. Paint should be stirred carefully before use. and packaging to your local authorized institution for usage
4. A suitable quantity of “ Tap water ” can be added to get or recycling purpose.
reasonable viscosity for application. Note: Wastes and empty containers should be disposed of in
5.Do not apply on wet and moistened surfaces until
accordance with local regulations made under the Control of
completely dry.
Pollution Act and the Environmental Protection Act.
6.Do not apply the next coat unless the previous one is fully dry.
Minimum recoating interval time should be followed.
Disclaimer
7. Adequate ventilation should be provided during application. Issued 2017
To the best of our knowledge the technical data listed herein is true and accurate up to publication date and is subject to change without prior notice. User must contact Al-Jazeera Paints
Company to verify of any modifications before specifying or ordering the product. Thus, information given in this sheet is not intended to be exhaustive and any person using the product other
than the recommendations in this sheet or without reverting to our Al-Jazeera TSD, he should take his accountability in this connection.
As we are not capable to control the quality and the substrate's conditions as well as the factors that affect on using, or applying the product, so we never give any written or implied guarantee
in these documents, but we guarantee our products to conform to Al-Jazeera quality while we assume no responsibility for coverage, performance or injuries resulting from application. Liability
"if any" is limited to replace the products mentioned above.