Scribd
Upload
58 views

03 Disassembly and Reassemble

This document provides instructions for disassembling and reassembling an LED TV. It describes removing components like the rear cover, main board, speakers, and cables. Electrostatic sensitive devices require caution during handling. Pictures accompany the text instructions to illustrate each step. Reassembly follows the disassembly steps in reverse order. Different screw sizes and quantities are used depending on the TV size.

Uploaded by

Yudhi Sensasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views

03 Disassembly and Reassemble

This document provides instructions for disassembling and reassembling an LED TV. It describes removing components like the rear cover, main board, speakers, and cables. Electrostatic sensitive devices require caution during handling. Pictures accompany the text instructions to illustrate each step. Reassembly follows the disassembly steps in reverse order. Different screw sizes and quantities are used depending on the TV size.

Uploaded by

Yudhi Sensasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

3.

Disassembly and Reassemble

3. Disassembly and Reassembly


This section of the service manual describes the disassembly and reassembly procedures for the LED TV.

This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
WARNING

3-1. Disassembly and Reassembly


1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
CAUTION 3. If there is no additional coment, it is same for all inches.

„„ UA22F5000AR

Description Picture Description Screws

1 Place TV face down on cushioned table.

2 Remove 5 screws of Rear Cover.

6003-001782

3 Remove the Rear Cover.

3-1
3. Disassembly and Reassemble

Description Picture Description Screws

4 Remove 5 screws of Main Board and


Function Assy.

6001-003016

5 Remove the Speakers, Function Assy


Cable, LVDS Cable and BackLight Cable.

6 Completed disassembly.

„„ UA28F4000AR

Description Picture Description Screws

1 Place TV face down on cushioned table.

2 Remove 3 screws from the Stand and


Remove Stand.

6003-001782

3-2
3. Disassembly and Reassemble

Description Picture Description Screws

3 Remove 10 screws of Rear Cover.

6003-001782

6003-002755

4 Remove the Cover Jack and Function


Assy Cable

5 Remove the Rear Cover.

6 Remove 9 screws of Main Board and


Power Board.

6001-003016

7 Remove the Speakers, Power Cables,


LVDS Cable and Panel Drive Cable.

3-3
3. Disassembly and Reassemble

Description Picture Description Screws

8 Completed disassembly.

NOTE

Reassembly procedures are in the reverse order of disassembly procedures.

„„ Screw Size
Code No. COLOR A (mm) B (mm) C (mm) Q'ty Screw Image

19" : 5EA
6003-001782 BLACK 7.80~8.30 11.20~12.00 3.81~3.91 22" : 5EA
28" : 7EA

19" : 4EA
6001-003016 WHITE 7.1~7.5 4.7~5.0 2.92 ~ 2.98 22" : 5EA
28" : 9EA

19" : 2EA
6003-000115 BLACK 5.8~6.3 5.5~6.0 2.95~3.05
28" : 2EA

3-4
3. Disassembly and Reassemble

3-2. Assy Board P-Jog Switch & Ir


„„ How to disassembly

Description Picture Description Refer

1 Loosen 2 screws.

2 Pull out a jog function.

3-5
3. Disassembly and Reassemble

„„ How to assembly

Description Picture Description Refer

1 Insert a jog function.

2 Put 2 screws.

3 Press the function assy into the cabinet


until locked

When you want to ignore the funtion key actions

Option Engineer Option Type of PANEL KEY 5 way : IR + Key [ Default ]


Control Old : Touch Function (C model) Key
IR Only : Do not work Function key
Debug
SVC
ADC/WB
Advanced

3-6
3. Disassembly and Reassemble

3-3. Disassembly(PTC)
„„ How to disassembly

Description Picture Description Refer

1 Place TV face up on cushioned table.

2 Products at the top of the central TOP-


CHASSIS is rotated by 45 degrees outward
and pulls.

3-7
3. Disassembly and Reassemble

Description Picture Description Refer

3 Pull in the same way from the center of the


top.

4 Pull the left part of the product as shown


while holding the raised portion on figure 3.

5 Pull the bottom part of the product as


figure 2 while holding the raised portion on
figure 4.

3-8
3. Disassembly and Reassemble

Description Picture Description Refer

6 As shown in the picture, Lift the bottom of


the TOP-CHASSIS.

7 Pull the products at the bottom of the right


side of the chassis.

3-9
3. Disassembly and Reassemble

Description Picture Description Refer

8 Lift the bottom of the chassis with one


hand and holding the bottom of the product
after you pull the right side of the product
chassis.

9 Disassembly is complete.

CAUTION

To use JIG : Does not lift the chassis by


hand, JIG using the lift.

NOTE

Reassembly procedures are in the reverse order of disassembly procedures.

3-10

You might also like