Scribd
Upload
212 views1 page

Creo Parametric Help Center

Cabling in Creo Parametric enables setting up the cabling environment through options like displaying reference designators, cables as thick or centerline, hidden lines, cable portions inside components, and cable colors. Key steps include clicking a toolbar button or checking an option in the Options dialog box to display reference designators, and setting display preferences for dimensions, annotations, notes and reference designators. This allows customizing the cabling environment display as needed.

Uploaded by

Shubham Kaklij
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
212 views1 page

Creo Parametric Help Center

Cabling in Creo Parametric enables setting up the cabling environment through options like displaying reference designators, cables as thick or centerline, hidden lines, cable portions inside components, and cable colors. Key steps include clicking a toolbar button or checking an option in the Options dialog box to display reference designators, and setting display preferences for dimensions, annotations, notes and reference designators. This allows customizing the cabling environment display as needed.

Uploaded by

Shubham Kaklij
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

4/28/2021 Creo Parametric Help Center

Data Exchange Cabling > Using Cabling > Setting Up the Cabling
Environment
Detailed Drawings
Layout Setting Up the Cabling
Surfacing
Environment
Rendering
Assembly Design
Cabling enables you to set various
Advanced Framework Design different features which allow you to
Welding Design display the cabling environment the
Electrical Design way you require. You can perform the
Electrical Design following operations:
Cabling
• Display reference designator labels
Cabling Overview
• Display cables as thick or centerline
Using Cabling
• Display hidden lines
About Cabling
Using the Cabling Workflow • Display cable portions inside the
components
About Specific File Types for Cabling
• Define colors for cables, segments,
Setting Up Configuration Options
subharness, and locations
Setting Up the Cabling Environment
• Setup cabling drawing options
Workflow to Manually Designate
Components and Route Cables Displaying Reference Designators
Workflow to Logically Designate
Components and Route Cables
• From the Graphics toolbar:
Referencing Logical Data
◦ Click in the Graphics toolbar to
Creating the Harness Part display the reference
About Spools designators.
Adding Wires and Cables
• From the PTC Creo Parametric
Ribbon Cables Options dialog box:
Component, Connector, and Pin
Using Terminators and Terminator Tables 1. Click File > Options. The
PTC Creo Parametric Options
Using Parameters in Cabling
dialog box opens.
Routing Cables
2. Click Entity Display. The
Using Locations Change how entities are
Using Bundles displayed area opens.
Using Overbraids 3. Under the Dimensions,
Networks annotations, notes and
reference designators display
Adding Cabling Cosmetic Features
settings area, select the Show
Extract Assemblies reference designators of
Exporting Cabling Geometry cabling, ECAD and piping
components check box.
Report Parameters
Glossary
Select the Show note
Harness
names instead of note text
Creo Harness Manufacturing
check box to display the name
ECAD
f th t Cl th h k
support.ptc.com/help/creo/creo_pma/usascii/index.html#page/electrical_design/cable/setting_up_cabling_environment.html 1/1

You might also like