Scribd
Upload
162 views1 page

Instant Concrete Mix Design: Acknowledge

The document provides an instant concrete mix design for a client. The mix is designed to achieve a compressive strength grade of K500, with a slump of 12±2 cm and a water-cement ratio of 0.00. The maximum aggregate size is 26 mm. The mix proportions consist of 25.93% cement, 43% coarse aggregate, 31% fine aggregate, and 0% water by volume. The total solid volume is 1.0 m3 and the concrete density is 2268 kg/m3.

Uploaded by

Joel Alfonso Manurung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views1 page

Instant Concrete Mix Design: Acknowledge

The document provides an instant concrete mix design for a client. The mix is designed to achieve a compressive strength grade of K500, with a slump of 12±2 cm and a water-cement ratio of 0.00. The maximum aggregate size is 26 mm. The mix proportions consist of 25.93% cement, 43% coarse aggregate, 31% fine aggregate, and 0% water by volume. The total solid volume is 1.0 m3 and the concrete density is 2268 kg/m3.

Uploaded by

Joel Alfonso Manurung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Instant Concrete Mix Design

Client : PT. SRMI


Project : Kerjasama Manufaktur Beton Instan
Date : October 2, 2020
Attention : Bapak Joel

Grade (K/Fc'/G/) : K500


Slump (cm) : 12 ± 2
W/C ratio : 0.00
Max.size of aggregate (mm) : 26 mm

MIX-DESIGN PROPORTION

MATERIAL TYPE/SIZE SOLID SPECIFIC PROPORTION MATERIAL REMARKS


VOLUME GRAVITY CONTENT
m3 (Ton/m3) (%) (Kg/m3)

Cement Type 1 0.26 3.15 25.93% 588


Water - 0.00 1.00 0% 0
Coarse Aggregate (Split) Split 5/25 mm 0.43 2.00 43% 980
Fine Aggregate (Sand) Babel 0.31 2.60 31% 700

Total solid Volume 1.0 m³ Concrete Density 2268 (kg/m3)

Note :
The above mixes will comply with all the current requirements of ACI provided all aspects of sampling preparation and testing
is carried out in accordance with current editions of ASTM.

Bekasi, October 2, 2020 Acknowledge,


Created by, Approved by,

M. Hariadi Nur Harismanto

Kantor : Gudang Manufaktur :


Jl. Arteri JORR No. 71, Jatimelati Jl. Arteri JORR Jatiwarna, RT 02/03, Jatimelati
Kota Bekai, Indonesia Pondok Melati, Kota Bekasi, Indonesia
Tilp: 08112511071 (Samping Gedung SSI, Ruko Hj.Riyah)

You might also like