0% found this document useful (0 votes)
518 views1 page

S T A G 2 - W: Petrol - Gas Switch (Injection)

The STAG2-W switch is designed to automatically or manually switch a vehicle's engine from petrol to gas. It operates in the circuit shown connecting the gas and petrol electro-valves. The switch has positions for emergency, petrol-only, and automatic operation where it switches to gas at around 2000 RPM. It is warranted for 12 months from purchase or 24 months from manufacturing date.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
518 views1 page

S T A G 2 - W: Petrol - Gas Switch (Injection)

The STAG2-W switch is designed to automatically or manually switch a vehicle's engine from petrol to gas. It operates in the circuit shown connecting the gas and petrol electro-valves. The switch has positions for emergency, petrol-only, and automatic operation where it switches to gas at around 2000 RPM. It is warranted for 12 months from purchase or 24 months from manufacturing date.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Page 2

INTRODUCTION
STAG2-W switch is intended for automatic or manual activation of the gas
rectifier and simultaneous cut-off of petrol rectifier in vehicles fitted
with petrol engines with indirect injection and gas installation.

TECHNICAL DATA
The switch operates in the circuit shown in Fig.1.
Petrol - gas Nominal power supply: 12V
Allowable power supply: 10...16V
switch (injection) Ambient temperature: -30°C ... +70°C
Outlet capacity (conductors: blue, yellow) - 5A

ADJUSTMENT AND OPERATION

S
T
A
G2
-
W "0" position emergency work mode enables to activate the engine using gas.
When power supply is connected, the petrol rectifier
is switched on. LED A (red) is lit.
When the ignition switch is turned, the gas rectifier
is switched on. LED A (green) is lit.
E8 67R-013608 "I" position petrol rectifier activation.
LED A (red) is lit.

"II" position automatic work. LED A (yellow) is lit.


In case of automatic operation, the engine is activated using petrol
operation manual (LED A yellow) and when it reaches ca. 2000 rpm, rectifiers automatically
switch from petrol to gas and the colour of lit LED A changes into green.
Adjustment of the switching threshold is made by a pot available
at the side of the switch housing. LED B (red) indicates gas reserve.

Manufacturer: LED A
AC Spó³ka Akcyjna II O I
15-182 Bia³ystok, ul. 27 Lipca 64, Poland
LED B
tel. +48 85 7438148, fax +48 85 6538649
www.ac.com.pl, e-mail: [email protected]

Page 3 Page 4

CONNECTION WARRANTY CONDITIONS

Connect the group of conductors of the switch in accordance The manufacturer guarantees proper operation on the
with the following diagram. device for 12 months from the purchase date, but not
NOTE! STAG2-W works only with the group longer than 24 month from the manufacturing date
of conductors attached to the set. stamped on the housing.
The warranty will not be applied to products, which
have been damaged due to:
GAS
-application for purposes other than designed ones
LEVEL SENSOR -improper operational conditions
EMULATOR -mechanical damage
WHITE
STAG2-Ex -other, resulted from user’s fault

REDUCER
Damaged device together with warranty and purchase
bill should be supplied to the AC S.A. Ltd. local distributor.
LPG BLUE Petrol-LPG
ELECTRO-VALVE Switch

STAG2-W
YELLOW

+12 V 7,5A
RED
IGNITION
SWITCH FUSE

PETROL BLACK
ELECTRO-VALVE

BROWN

+12 V
sale date seller’s
stamp & signature
IGNITION
COIL

Fig.1. Connection diagram


“04-015.95.00.10 z dn. 31.03.2011”

You might also like