Scribd
Upload
258 views

Name: Saad Kabir Uddin Matric No: A19EC4056 Section: 08: Objectives

This document contains the results of a student named Saad Kabir Uddin completing Lab 4 and an extra activity on ARP in their networking class. The lab explores ARP and switching operations using a Packet Tracer simulation. The student reviews the topology, generates network traffic between PCs by using ping commands, and observes the ARP tables and MAC address tables on the routers and switches. Wireless lab results are attached by completing another activity file that tracks completion percentage.

Uploaded by

Saad Kabir Prottoy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
258 views

Name: Saad Kabir Uddin Matric No: A19EC4056 Section: 08: Objectives

This document contains the results of a student named Saad Kabir Uddin completing Lab 4 and an extra activity on ARP in their networking class. The lab explores ARP and switching operations using a Packet Tracer simulation. The student reviews the topology, generates network traffic between PCs by using ping commands, and observes the ARP tables and MAC address tables on the routers and switches. Wireless lab results are attached by completing another activity file that tracks completion percentage.

Uploaded by

Saad Kabir Prottoy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Name: Saad Kabir Uddin

Matric no: A19EC4056


Section: 08

Lab 4
*Lab 4 plus is a combination of Lab 4 and an extra activity on ARP.

Packet Tracer Simulation – Exploration of ARP and Switch Table


Communications
Objectives

• To explore ARP and switching operations.

Introduction

The topology is given to you. All IP addresses have been assigned to all devices. Please
follow each step-in sequence.

Figure 1

Part 1: Review the topology

Step 1: Perform the following tasks.

HKM_S11920 Page 1
a. At Router RTA, enter the CLI. At the command prompt type the following commands.
Snap the results after the last command and paste it here.

HKM_S11920 Page 2
RTA>enable
RTA#show arp

b. At Router RTB, enter the CLI. At the command prompt type the commands as in
Figure 2. Snap the results after the last command and paste it here.

c. At Switches SWA, SWAB and SWC, enter the CLI. At the command prompt type the
following commands. Snap the results after the last command and paste it here.

HKM_S11920 Page 3
SWA>enable
SWA#show arp
SWA#show mac-address-table
d. At PCA, click on the PC icon, and then choose Desktop-Command Prompt. At the
command prompt type and click enter. Snap the results after the last command and
paste it here. Do this to all PCs in the topology.

e. What are your thoughts on the results?


Ans: The PCs are not communicating with each other.

Part 2: Generate Network Traffic

Step 1: Generate traffic between PCA and PCB.

In the command prompt Perform the following tasks task to reduce the amount of network
traffic viewed in the simulation.

a. Click PCA and click the Desktop tab > Command Prompt.
b. Enter the ping 192.168.33.22 command. This may take a few seconds.
c. In the Command prompt of PCA, type arp –a. Paste the result of this command here.

d. In the Command prompt of PCB, type arp –a. Paste the result of this command here

HKM_S11920 Page 4
e. In the Command prompt of PCC, PCD abd PCE, type arp –a. Paste the result of this
command here.

Step 2: Generate traffic between PCC to all other PC except PCA.

a. Click PCC and click the Desktop tab > Command Prompt.
b. Enter the ping 192.168.33.22 command (ping to PCB). Then type arp –a. Paste the
result after these commands here.

c. Enter the ping 192.168.11.112 command (ping to PCD). Then type arp –a. Paste the
result after these commands here.

d. Enter the ping 192.168.4.110 command (ping to PCE). Then type arp –a. Paste the
result after these commands here.

e. Discuss the results you got from all the commands on PCC.
Ans: By pinging to 192.168.33.22, PCC communicated with PCB. By
pinging to pinging 192.168.11.112, PCC communicated with PCD. And
by pinging to 192.168.4.110, PCC communicated with PCE.
f. At Router RTA, enter the CLI. At the command prompt type the following
commands. Snap the results after the last command and paste it here.

HKM_S11920 Page 5
RTA>enable
RTA#show arp

g. At Router RTA, enter the CLI. At the command prompt type the following commands.
Snap the results after the last command and paste it here.

RTB>enable
RTB#show arp

Step 3: Switch MAC address table.

a. At Switch SWA, enter the CLI. At the command prompt type the following commands.
Snap the results after the last command and paste it here.

SWA>enable

HKM_S11920 Page 6
SWA#show arp

SWA#show mac-address-table

b. At Switch SWB, enter the CLI. At the command prompt type the following commands.
Snap the results after the last command and paste it here.

SWB>enable
SWB#show arp

SWB#show mac-address-table

c. At Switches SWC and Switch1, enter the CLI. At the command prompt type the
following commands. Snap the results after the last command and paste it here.

HKM_S11920 Page 7
SWC>enable
SWC#show arp

SWC#show mac-address-table

d. Do switches use arp table? (Y/N)


Ans: N
e. Explain your answer in (d) *Hint: the answer may surprise you. Google for the explanation.
It is not part of NetComm syllabi, it is just for knowledge..
Ans: Because ARP is for layer 3 while switches are in layer 2 devices.
f. What information does the command show mac-address-table gives?
Ans: To display the information about the MAC address table, use the
show mac address-table command.

Part 3: Attach wireless lab results.

In this part, you will use Lab 4 .pka file.


Step1: Change the filename of Lab 4.
a. Change the Lab 4 filename to include your name. *Example: Lab4AliAhmad.pkt
b. Go through the instructions. As you complete the tasks, you will see the bottom
right-hand corner of the pkt file increase in completion percentage, until you get
100/100.

c. Once you have completed fully, capture the screen (which includes the filename, the
topology and the activity wizard showing completion) and paste it here.
HKM_S11920 Page 8
HKM_S11920 Page 9

You might also like