Scribd
Upload
75 views

Lab Equipment

The document lists laboratory equipment that the contractor shall provide and maintain for testing purposes. It includes 29 items for soil testing and 11 construction material tests such as slump test, compressive strength test, and rapid chloride penetrability test.

Uploaded by

emily story
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
75 views

Lab Equipment

The document lists laboratory equipment that the contractor shall provide and maintain for testing purposes. It includes 29 items for soil testing and 11 construction material tests such as slump test, compressive strength test, and rapid chloride penetrability test.

Uploaded by

emily story
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

No.

Dokumen : JKR 20800-0226-20


No. Keluaran : 01
SECTION A: PRELIMINARIES No. Pindaan : 00
AND GENERAL CONDITIONS Tarikh : 02 Januari 2020
JKR MALAYSIA Muka Surat : A/32

APPENDIX A/4

LIST OF LABORATORY EQUIPMENT

The Contractor shall provide and maintain the following testing laboratory equipment, those
which are deemed necessary only for the project, and shall become the property of the
Contractor at the end of the Contract: -

Test Equipment
1. Mixing Pan (500mm x 500mm)
2. Slump Cone (100mm x 200mm x 300mm)
1. Slump Test
3. Steel Tamping Rod (600mm x 16mm)
4. Measuring Tape
1. Steel Mold Cube (150mm (H) x 150mm (W) x 150mm (L))
2. Steel Mold Cylinder (150mm (D) x 300mm (H))
2. Compressive Strength Test
3. Scoop
(Fresh Concrete)
4. Steel Tamping Rod
5. Compression Test Machine
1. Coring Machine
3. Compressive Strength Test
2. Core Bit
(Cores Sample)
3. Compression Test Machine

4. Concrete Cover Test 1. Electromagnetic Covermeter

1. Vacuum Saturation Apparatus


2. Applied Voltage Cell
5. Rapid Chloride
3. Voltage Application and Data Readout Apparatus
Penetrability Test
4. Corecase
5. Diamond Saw
1. Rebound Hammer Apparatus
6. Rebound Hammer Test
2. Steel Brush
1. Voltmeter
7. Ultrasonic Pulse Velocity
2. Calibrator Block
Test
3. Transmitter and Receiver Transducer
1. Driver Unit (Powder Actuated Device)
8. Penetration Resistance
2. Probe
Test
3. Measuring Unit
1. Phenolphthalein
2. Methylated spirit
9. Carbonation Test 3. Bottle spray
4. Distilled water
5. Beakers
1. Balance weighing
2. Drying oven
10. Water Absorption Test
3. Water tank
4. Desiccator
1. Balance weighing
2. Drying oven
11. Sorption Test 3. Steel Tray
4. Caliper
5. Desiccator

@COPYRIGHT JKR MALAYSIA


No. Dokumen : JKR 20800-0226-20
No. Keluaran : 01
SECTION A: PRELIMINARIES No. Pindaan : 00
AND GENERAL CONDITIONS Tarikh : 02 Januari 2020
JKR MALAYSIA Muka Surat : A/33

Test Equipment Quantity

a) Soil Testing 1. Moisture content tins – 76mm x 25mm with lids


25
Equipment

2. Electric balance of 1kg capacity, accurate to 0.01g


with a tare correction not 1
less than 100g

3. Electric forced draught oven, capacity of 0.08 cu.m 1

4. Desiccator containing anhydrous silic gel 1

5. Liquid limit penetrometer set with all accessories


and digital penetration measurement gauge 0.01 1
mm precision

6. Glass plate – 500mm x 500mm x 10 mm 2

7. Flexible spatula of about 160 mm long 2

8. Evaporating dish of about 150 mm diameter 2

9. Stopwatch readable to 1s 1

10. Linear shrinkage moulds 140mm x 12.5mm radius 5

11. 203mm diameter B.S. sieves – 75mm, 63mm,


50mm, 37.5mm, 28mm, 25mm, 20mm, 14mm,
12.5mm, 9.5mm, 6.3mm, 5mm, 4.75mm, 3.35mm, 1 of each
2.36mm, 2mm, 1.18mm,600μm, 425μm, 300μm,
212μm, 150μm, 75μm, 63μm, lid and pan together
with vibrating machine

12. 203mm diameter B.S. sieves - 75μm, 425μm 1 of each

13. Sample splitter – 50mm, 12mm 2 of each

14. Balance of 10kg capacity, accurate to 1kg 1

15. Modified compaction proctor set with rammer 4.5kg 1


and moulds as specified in MS 1056

16. Modified compaction mould sample extruder as 1


specified in MS 1056

@COPYRIGHT JKR MALAYSIA


No. Dokumen : JKR 20800-0226-20
No. Keluaran : 01
SECTION A: PRELIMINARIES No. Pindaan : 00
AND GENERAL CONDITIONS Tarikh : 02 Januari 2020
JKR MALAYSIA Muka Surat : A/34

Test Equipment Quantity

17. Steel scoop 1

18. Measuring flask – 1000c.c 1

19. Vernier calliper – 150mm 1

20. Steel rule – 300mm 1

21. Compression machine suitable for laboratory and


field C.B.R.s with all fittings necessary for field and 1
laboratory operation as specified in MS 1056

22. C.B.R. moulds fitted with collars and base plates for
compaction and soaking and tripods for small
measurement fitted with dial gauges having 10
0.01mmdivisions and 25mm travel as specified
in MS 1056

23. Annular surcharge disc of 2.26kg weight 10

24. Complete field density kit, sand replacement


typesuitable for volume measurement of 0.005 cu.m 2
to an accuracy of not less than 0.0001 cu.m as
specified MS 1056

25. Crowbar, pick and spade 1 of each

26. Drying pans – 406mm x 406mm x 76mm 1

27. Mackintosh / JKR Probe 1

28. Malaysian Standard MS 1056 – Soils for Civil 1


Engineering Purposes – Test Method, latest edition

29. Malaysian Standard MS 2038 – Site Investigations 1


– Code of Practise

@COPYRIGHT JKR MALAYSIA

You might also like