FOSROC

PRODUCT
CATALOGUE
2020

Concrete Grouts Waterproofing

Repair

Joint Fillers Industrial Protective Surface

& Sealants Flooring Coatings Treatments
About Fosroc & Parchem
Fosroc is a world leader in construction solutions. Fosroc has an extensive network of offices and
Since the company’s beginnings over 80 years ago, manufacturing locations across Europe, the Middle East,
Fosroc has developed into an international leader India and Asia, and is further represented in other regions
in delivering construction solutions for virtually across the world by distributor and licensee partners.
any building or infrastructure project. New or old
Parchem Construction Supplies, part of DuluxGroup, is
construction above or below ground, we combine high
the licensed manufacturer and distributor of Fosroc, Vector
quality products, expert technical support, customer
and Vandex products in Australia, and Concrete Plus is the
service and innovation to give you the best solution
licensed distributor in New Zealand.
for your project.

We provide construction solutions for; new & old concrete

repair, grouts & anchors, waterproofing joint fillers &
sealants, industrial flooring, protective coatings, surface
treatments, concrete admixtures and grinding aids.

2
GREAT
FOSROC
SOLUTIONS.
NOW IN COMPACT
WEATHERPROOF BAGS
At Fosroc we’ve improved the bags used for our
powder products in an industry first packaging solution.
Our new compact bags are available for

Renderoc® Conbextra®
Cemtop® Guncrete
Patchroc® Paveroc
Nitoflor®

UV RESISTANT SUITABLE MORE COMPACT

FOR OUTDOOR BAGS
The new low-density
polyethylene (LDPE) bags STORAGE FOR UP The bags are more tightly
are resistant to damaging TO 12 MONTHS filled which improves
UV rays, helping maintain product stacking while also
product integrity. The new bags are rainproof ensuring they are easier
to better protect the product to pick up, carry and use
from rain and moisture. on site.

3
Table of Contents
Concrete Repair 11
Cementitious Mortars 12
Fosroc Renderoc FC 12
Fosroc Renderoc HB 12
Fosroc Renderoc HB25 12

Concrete Repair Fosroc Renderoc HB40 12

Fosroc Renderoc HB40 Plus 13
Fosroc Renderoc HB70 13
Fosroc Renderoc HB70 Plus 13
Fosroc Renderoc Rapid 13
Fosroc Renderoc LA55 14
Fosroc Renderoc LA55 Plus 14
Fosroc Renderoc G 14
Fosroc Renderoc CAC 14
Fosroc Renderoc ST 06 15
Fosroc Guncrete E 15
Fosroc Patchroc GP 15
Fosroc Patchroc C 15
Fosroc Paveroc 15
Epoxy Mortars 16
Fosroc Nitomortar AP 16
Fosroc Nitomortar 903 16
Fosroc Nitomortar 908 17
Fosroc Nitomortar UA 17
Fosroc Nitomortar F4 Fillers 17
Fosroc Nitomortar EL-HB 18
Primers & Bonding Agents 18
Fosroc Nitobond EP 18
Fosroc Nitobond HAR 19
Fosroc Nitobond AR 19
Fosroc Nitobond SBR 19
Fosroc Nitoprime Zincrich 20
Injection Materials 20
Fosroc Nitofill PU130 20
Fosroc Nitofill PU150 20
Fosroc Nitofill Accelerator 20
Fosroc Nitofill LV 21
Fosroc Nitofill Mechanical Packers 21
Corrosion Control Systems 22
Vector Galvashield XP 22
Vector Galvashield Fusion T2 22
Vector Galvashield CC 23
Vector Galvanode DAS 24
Ebonex 25

4
 Grouts 27
Cementitious Grouts 28
Fosroc Construction Grout 28
Fosroc Conbextra GP 28
Fosroc Conbextra C 28

Grouts Fosroc Conbextra HF 29

Fosroc Conbextra HS 29
Fosroc Conbextra HES 29
Fosroc Conbextra Deep Pour 29
Fosroc Conbextra UW 30
Fosroc Conbextra CB 30
Fosroc Renderoc BB 30
Fosroc Conbextra Grout Aggregate 30
Fosroc Conbextra BB92 30
Fosroc Conbextra TA 31
Epoxy Grouts 31
Fosroc Conbextra EP10 31
Fosroc Conbextra EP65 Plus 32
Fosroc Conbextra EP120 32
Fosroc Conbextra EP300 DP 33
Fosroc Conbextra EP935 33

Waterproofing 35
Pre-Applied Sheet Membrane 36
Fosroc Proofex Engage 36
Self-adhesives Waterproofing Membranes 37
Fosroc Proofex 3100 37
Waterproofing Fosroc Proofex 6100 37
Fosroc Primer 24 37
Drainage Cells and Protection Boards 37
Fosroc Proofex Sheetdrain 81 37
Fosroc Proofex Protection Board PP 38
Torch Applied Membranes 38
Fosroc Proofex Torchseal A300 38
Fosroc Proofex Torchseal A350 38
Fosroc Proofex Torchseal A400 38
Fosroc Proofex Torchseal A500 39
Fosroc Proofex Torchseal A600 39
Fosroc Proofex Torchseal A625 39
Fosroc Proofex Torchseal A700 39
Fosroc Proofex Torchseal A800 39

5
 Fosroc Proofex Torchseal A825 40
Fosroc Proofex Torchseal A900 40
Fosroc Proofex Torchseal Pressure SL Flash 40
Fosroc Primer 24 40

Liquid Applied Membranes 41

Fosroc Nitoprime 115 41

Fosroc Nitoprime 120 41

Fosroc Nitoproof 210 41

Fosroc Nitoproof 310 42

Fosroc Nitoproof 410 42

Fosroc Nitoproof 510 42

Fosroc Nitoproof 750 43

Fosroc Nitoproof 810 43

Fosroc Nitoproof Top Coat UV 43

Fosroc Nitoproof Top Coat EW 43

Fosroc Polyurea WHE110 44

Fosroc Polyurea WPE110 44

Fosroc Nitoprime 320 PU 45

Fosroc Polyurea SCS 45

Cementitious Waterproofing 45

Vandex BB75-Z 45

Vandex Elasticizer PK75 46

Vandex Cemelast 46

Vandex Concrete Grey 46

Vandex Plug 46

Vandex Uni-Mortar 1-Z 47

Vandex Construction Joint Tape 47

Adhesives and Tile Adhesives 47

Fosroc Nitotile Flex 47

Waterproofing Accessories - Liquid Applied 48

Fosroc Nitoband 48

Waterstop Systems 49

Fosroc Supercast PVC Waterstops 49

Earth Shield 49

Hydrotite 50

Leakmaster 50

Superswell 47B 50

6
 Joint Sealants & Fillers 51
General Construction Sealants 52

Fosroc Nitoseal MS250 52

Fosroc Nitoseal MS400 52

Fosroc Nitoseal PU250 52

Joint Sealants
& Fillers Fosroc Nitoseal PU400 53

Fosroc Nitoseal MB175 53

Fire Rated Sealants 53

Fosroc Flamex One 53

Fosroc Flamex PU 53

Fosroc Flamex XT 54

Civil Construction Sealants 54

Fosroc Nitoseal SC600 54

Fosroc Nitoseal SC800 54

Fosroc Nitoseal SC820 55

Fosroc Thioflex 555 55

Fosroc Thioflex 600 Pouring Grade 55

Fosroc Thioflex 600 Gun Grade 56

Fosroc Expoband 110 56

Primers 57

Fosroc Primer 4 57

Fosroc Primer 7 57

Fosroc Primer 7E 57

Fosroc Primer 10 58

Fosroc Primer 13 58

Fosroc Primer 21 58

Precast Concrete Jointing 59

Conseal CS231 59

Proofex S 59

Joint Fillers and Backing Rods 60

Fosroc Expandafoam 61

Fosroc Expandafoam Closed Cell 62

Fosroc Expandafoam Open Cell 63

Fosroc Hydrocor Corkjoint – Type 3 / Type 106 64

Fosroc Hydrocell 65

Fosroc Cellflex 66

Fosroc Bond Breaker Tape 67

7
 Industrial Flooring Solutions 69
Hardeners, Densifiers and Sealers 70
Fosroc Nitoflor HD 70
Fosroc Nitoflor HD-S 70
Fosroc Nitoflor FC100 70

Industrial Flooring Fosroc Nitoflor Sicaltop 71

Cementitious flooring systems 71
Fosroc Nitoprime 330 71
Fosroc Cemtop GP Advanced 71
Fosroc Cemtop XD 72
Cemtop HD30 72
Resin flooring systems 73
Fosroc Nitoflor FC130 73
Fosroc Nitoflor FC150 HP-FC 73
Fosroc Nitoflor FC150 HP 74
Fosroc Nitoflor SL 74
Fosroc Nitoflor SLX 75
Fosroc Nitoflor N 75
Fosroc Nitoflor PU600 75
Fosroc Nitoflor PU200 76
Fosroc Nitoflor PU Colour Pot 76
Epoxy mortars 77
Fosroc Nitomortar 903 77
Fosroc Nitomortar F4 Fillers 78
Slip resistance solutions 78
Fosroc Nitoflor Medium Grit 78
Fosroc Nitoflor Anti-Slip Grains 78
Colour Pots 79
Fosroc Nitoflor Colour Pots 79

Protective Coatings 81
Concrete Anti-Carbonation & Chloride Ion, Protective Coatings 82
Fosroc Nitoprime DG 82
Fosroc Dekguard Primer 82
Fosroc Dekguard E2000 82

Protective Coatings Fosroc Dekguard Elastic 83

Fosroc Dekguard Clear 83
Fosroc Dekguard S 83
Concrete & Masonry, Anti-Chloride Ion, Impregnating Treatments 83
Fosroc Nitocote SN502 83
Fosroc Nitocote SN508 Creme 84
Fosroc Nitocote SN511 84
Chemical Resistant Protective Coatings 84
Fosroc Nitocote EP405 84
Fosroc Nitocote EP410 85
Fosroc Nitocote EP500 85

8
 Surface Treatments 87
Concrete Curing Compounds 88
Fosroc Concure AV 88
Fosroc Concure A99 88
Fosroc Concure CR 88
Fosroc Concure HR90 89
Surface Treatments
Fosroc Concure WB30 89
Fosroc Concure B90 89
Fosroc Concure X90 90
Release Agents and Retarders 90
Fosroc Form Release Agent 90
Fosroc Preco Bondbreaker 90
Fosroc Preco Form Creme 91
Fosroc Preco RWB 91

Other 91

Solvents 91
Fosroc Solvent 10 91

Product Portfolio Alignment (Previous product names) 93

Product Portfolio in Transition to Fosroc 94

Product Index 96

Please note that Made To Order (MTO) products need to be ordered by contacting
Customer Service or your Fosroc representative. Minimum Order Quantities (MOQ) and
Order Quantity Breaks apply. Please contact Customer Service for details. Lead times
stated in this catalogue are a guide only, please allow an extra 14 days lead time for all
New Zealand MTO orders.

9
10
CONCRETE
REPAIR
RENDEROC® ∙ GUNCRETE ∙ PATCHROC®
PAVEROC ∙ NITOMORTAR ∙ NITOBOND
NITOPRIME ∙ NITOFILL ∙ ®

Please always refer to the product TDS before making Concrete Repair
your final selection or speak to your Fosroc representative.

11
 CEMENTITIOUS MORTARS

Please note many of our powdered bags products now have new and improved packaging. Product sizes and pallet quantities
for some products has changed. For the latest information regarding these changes please contact Fosroc customer service.

Fosroc Renderoc FC
Renderoc FC cementitious fairing coat is designed for application in thin layers up to 3 mm, to produce a fair-faced appearance to
concrete surfaces or masonry surfaces in readiness to receive a protective/decorative coating.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC302000-20KG RENDEROC FC 20KG 20KG   12.0L 48

9300611620637

RENDEROC FC
FC302005-20KG 20KG   12.0L 48
SPECCOL 20KG MTO
9300611623287

Fosroc Renderoc HB
Renderoc HB is a lightweight, high build concrete repair mortar for patching small sections in concrete up to 25 MPa. It can be applied
to vertical concrete patches 10mm to 80mm deep.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC306095-20KG RENDEROC HB 20KG 20KG 16.1 - 16.6 48

9300611623294

Fosroc Renderoc HB25

Renderoc HB25 is a high build, shrinkage compensated concrete repair mortar for patching up to 1m2 sections in concrete up to 30
MPa. It can be applied to vertical concrete patches 10mm to 80mm deep. Suitable for use with Galvashield anode protection systems.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC387080-20KG RENDEROC HB25 20KG 20KG 16.1 - 16.6 48

9300611623300

Fosroc Renderoc HB40

Renderoc HB40 is a high build repair mortar for localised repair of reinforced concrete up to 45MPa. It meets requirements of EN1504-3
Class R3. It can be applied to vertical concrete patches 10mm to 40mm deep. Suitable for use with Galvashield anode protection systems.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC302020-20KG RENDEROC HB40 20KG 20KG 12.9L 50

9330221006149

12
 CONCRETE REPAIR
Fosroc Renderoc HB40 Plus (Replaces Renderoc HB50)
Renderoc HB40 Plus is an extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R3, compatible with
concrete 25 - 50 MPa. For use in the reinstatement of concrete where low permeability and high resistivity characteristics are key
requirements. Can be used for vertical/overhead applications 10mm to 100mm.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC302023-20KG RENDEROC HB40 PLUS 20KG  12.1L 50

9300611603494

Fosroc Renderoc HB70

Renderoc HB70 is a high build repair mortar for localised repair of reinforced concrete >45MPa. It meets the requirements of EN1504-
3 Class R4. It can be applied to vertical concrete patches 10mm up to 40mm deep. Suitable for use with Galvashield anode protection
systems.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC303030-20KG RENDEROC HB70 20KG 20KG 10.2L 50

9330221006040

Fosroc Renderoc HB70 Plus

Renderoc HB70 Plus is a high strength, extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R4;
compatible with concrete strength > 45 MPa. For use in the reinstatement of concrete where low permeability, high compressive
strength and high resistivity characteristics are key requirements.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

RENDEROC HB70
FC303035-20KG 20KG 11.5L 50
PLUS 20KG
9300611603487

Fosroc Renderoc Rapid

Renderoc Rapid is designed for rapid reinstatement of bridge joint edges, roadway slabs and other concrete pavements. It is designed
to accept traffic two hours after placement, and can be applied 25mm to 250mm thick and up to 150 litres at a time.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

RENDEROC RAPID
FC300200-20KG 20KG 10.2L 50
20KG
9330221006613

13
Fosroc Renderoc LA55
Renderoc LA55 is a high strength, free-flowing micro-concrete reinstatement mortar for form and pour applications up to 200mm thick.
It meets the requirements of EN1504-3 Class R4. Suitable for use with Galvashield anode protection systems. It can be applied 50mm
- 200mm thick.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC302030-20KG RENDEROC LA55 20KG 20KG 10.0L 50

9330221006132

Fosroc Renderoc LA55 Plus

Renderoc LA55 Plus is a high strength, fluid micro-concrete for large volume structural repairs at a nominal thickness to 500mm.
It meets the requirements of EN1504-3 Class R4.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

RENDEROC LA55
FC300744-20KG 20KG 9.7L 50
PLUS 20KG
9300611562579

Fosroc Renderoc G
Renderoc G is a geopolymer repair mortar and lining system with high chemical and acid resistance. For use in highly corrosive
environments such as acid bunds or in sugar, dairy and wine processing industries and concrete eroded from “soft water” degradation.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC302025-20KG RENDEROC G 20KG 20KG 10.2L 50

9330221006439

Fosroc Renderoc CAC

Renderoc CAC is a high performance spray applied Calcium Aluminate mortar with superior biogenic corrosion resistance for use in
sewers and sewage treatment plants.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE YIELD MOQ BARCODE
CODE PALLET (DAYS)

RENDEROC CAC DRY

FC306063-20KG 20KG 9.8L 50 – –
SPRAY 2.5MM 20KG
9300611589859

RENDEROC CAC WET

FC306062-20KG 20KG 10.3L 50 – –
SPRAY 20KG
9300611589842

RENDEROC CAC DRY

FC306061-20KG 20KG 50 77 14-21
SPRAY 4MM MTO
9300611589835

14
 CONCRETE REPAIR
Fosroc Renderoc ST 06
Surface repair polymer modified protective cementitious mortar for applications up to 5mm.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

RENDEROC ST 06
FC302031-2L 2L 6 216
LIQUID PART A
9300611614087

RENDEROC ST 06
FC302032-10KG 10KG 72
POWDER PART B
9300611614070

Fosroc Guncrete E
Guncrete E is a high strength, low shrinkage, high build dry-spray applied concrete repair mortar supplied as a ready to use dry powder
for use with standard dry spray gunite or shotcrete equipment. It meets the requirements of EN1504-3 Class R4.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC302060-20KG GUNCRETE E 20KG 20KG 10.0L 50

9330221006101

Fosroc Patchroc GP
Patchroc GP is a fast setting patch repair mortar for the emergency reinstatement of localised patches between 15mm to 75mm deep in
concrete pavements, airport aprons, access ramps, roadways and many industrial situations such as gangways and warehouse floors.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC342070-20KG PATCHROC GP 20KG 20KG 10.0L 50

9330221081788

Fosroc Patchroc C
Patchroc C is a fast setting patch repair mortar for the emergency reinstatement of localised patches 25mm to 200mm deep in concrete
pavements, airport aprons, access ramps, roadways and many industrial situations such as gangways and warehouse floors.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC342060-20KG PATCHROC C 20KG 20KG 9.6L 50

9330221081795

Fosroc Paveroc
Paveroc is used for the reinstatement between 15mm to 50mm thick of large areas of concrete pavements and floors. The rapid
strength gain of Paveroc will ensure that down-time is significantly reduced. It may be used internally and externally.

PRODUCT QTY PER

DESCRIPTION SIZE YIELD BARCODE
CODE PALLET

FC302080-20KG PAVEROC 20KG 20KG 9.4L 50

9330221081771

15
 EPOXY MORTARS

Fosroc Nitomortar AP
Nitomortar AP is a 2 component epoxy paste for patching repairs to concrete and bonding of precast concrete components where
strength, impermeability to water and resistance to aggressive chemicals is essential. It is also ideal for setting starter bars, dowels,
anchoring in general and as an adhesive for Nitofill LV crack injection system and bonding Expoband 110 to concrete.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

NITOMORTAR AP 3L PACK

NITOMORTAR AP
FC320467-2L 2 54
BASE 2L
3 LITRE 9330221004725
PACK
NITOMORTAR AP
FC320468-1L 2 256
HARDENER 1L
9330221004725
NITOMORTAR AP 15L PACK

NITOMORTAR AP
FC320463-10L – 32
BASE 10L
15 LITRE 9330221004701
PACK
NITOMORTAR AP
FC320464-5L – 96
HARDENER 5L
9330221004696

Fosroc Nitomortar 903

Nitomortar 903 is a solvent free epoxy resin binder system for combining with selected fillers and aggregates to produce epoxy mortars/
screeds of various consistencies. Also used as a priming system with some Nitoflor epoxy flooring products.

PRODUCT QTY PER QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE CARTON PALLET (DAYS)

NITOMORTAR 903 6L PACK

NITOMORTAR 903
FC381019-4L 4 54 - -
BASE 4L
6L 9300611621023
PACK
NITOMORTAR 903
FC381018-2L 4 54 - -
HARDENER 2L
9300611621047
NITOMORTAR 903 30L PACK

NITOMORTAR 903
FC381019-20L – 32 – –
BASE 20L
30L 9330221080507
PACK
NITOMORTAR 903
FC381018-10L – 48 – –
HARDENER 10L
9330221080514

NITOMORTAR 903
FC381019-200L 200L – 4 1 14-21
BASE 200L MTO
9330221080491
NITOMORTAR 903
FC381018-200L HARDENER 200L 200L – 4 1 14-21
MTO
9330221080484

16
 CONCRETE REPAIR
Fosroc Nitomortar 908
Nitomortar 908 is a blend of silica aggregates and epoxy resin. The mixed material cures to form an impermeable repair unaffected by many
forms of chemical attack. It is supplied as a two part colour blended material in pre-weighed quantities ready for on-site mixing and use.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC340005-10L NITOMORTAR 908 10L 10 LITRE PACK 32

19330221005323

Fosroc Nitomortar UA
Nitomortar UA is a two-component epoxy which forms a putty consistency used for patching repairs to concrete structures particularly in
underwater situations.

ONLY AVAILABLE IN NEW ZEALAND

PRODUCT LEAD TIME
DESCRIPTION SIZE MOQ BARCODE
CODE (DAYS)

NITOMORTAR UA 4L PACK

NITOMORTAR UA PTA 2L
FC320465-2L 10 14-21
MTO

4L 9300611592002
PACK

FC320466-2L FOS NITOMTR UA PTB MTO 10 14-21

9300611592019
NITOMORTAR UA 20L PACK

FC320465-10L FOS NITOMTR UA PTA MTO 10 14-21

20L 9300611583628
PACK

FC320466-10L FOS NITOMTR UA PTB MTO 10 14-21

9300611583635

Fosroc Nitomortar F4 Fillers

Graded (up to 0.5mm) silica sand fillers used with Nitomortar 903 epoxy resin binder to produce mortars and screeds for various
application such as flooring preparation.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC312060-20KG NITOMORTAR F4 FILLERS 20KG 50

9330221005111

17
Fosroc Nitomortar EL-HB
Nitomortar EL-HB is a three component, solvent free system consisting of epoxy resins and a special blend of chemical resistant
fillers. It has a thixotropic consistency for easy hand placement, prior to finishing the surface of the application with a trowel. It is
simple and cost effective for overhead, vertical and horizontal patching from 5mm to 50mm on both dry and damp surfaces. It can
be used in brick, block and precast concrete manholes.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

NITOMORTAR EL-HB 9L PACK

NITOMORTAR EL-HB
FC342250-1.77L 32
BASE 1.77L
9330221005289

NITOMORTAR EL-HB 9L
FC342255-920ML 288
HARDENER 920ML PACK
9330221005272

NITOMORTAR EL-HB
FC342260-10.4KG 96
FILLERS 10.4KG
9330221005265

PRIMERS AND BONDING AGENTS

Fosroc Nitobond EP
Nitobond EP is a two component epoxy bonding agent for bonding fresh wet cementitious materials to existing cementitious surfaces.
It is suited to internal and external applications. It can also be used as part of a repair system where a substrate/repair barrier is
required or where the substrate is likely to remain permanently damp or wet.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

NITOBOND EP 1.5L PACK

FC321025-1L NITOBOND EP BASE 1L 4

1.5L
9300611620989
PACK

FC321026-500ML NITOBOND EP HARDENER 0.5L 32

9300611621108

NITOBOND EP 6L PACK

FC321025-4L NITOBOND EP BASE 4L 4

6L 
9300611620996
PACK

FC321026-2L NITOBOND EP HARDENER 2L 4

9300611621009

18
 CONCRETE REPAIR
Fosroc Nitobond HAR
Nitobond HAR is a single component polymer emulsion system designed as a bonding agent for Renderoc repair products.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

FC322070-1L NITOBOND HAR 1L 1L 6 378

9330221005531

FC322070-5L NITOBOND HAR 5L 5L 4 96

9330221005524

FC322070-20L NITOBOND HAR 20L 20L – 32

9330221005548

Fosroc Nitobond AR
Nitobond AR is a single component polymer emulsion system designed as a curing membrane for Renderoc repair products.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

FC520016-1L NITOBOND AR 1L 1L 6 378

9330221149952

FC320015-5L NITOBOND AR 5L 5L 4 96

9330221005586

FC320015-20L NITOBOND AR 20L 20L – 32

9330221005593

Fosroc Nitobond SBR

Nitobond SBR is a water resistant polymer additive for improving strength and adhesion of concrete repair mortars, cementitious floor
toppings and screeds, waterproof renders and cementitious slurries.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC323105-20L NITOBOND SBR 20L 20L 32

9330221005487

19
Fosroc Nitoprime Zincrich
Nitoprime Zincrich is the recommended anti-corrosion primer for exposed steel reinforcement for use with Renderoc concrete repair
mortars. The product actively resists corrosion within the confines of the repair location and helps prevent the generation of incipient
anodes in immediately adjacent locations.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

NITOPRIME
FC022100-1L 1L 6 480
ZINCRICH 1L
9330221005494

INJECTION MATERIALS

Fosroc Nitofill PU130

Nitofill PU130 is a multi-purpose hydrophobic polyurethane injection resin which is mixed with nominated levels of accelerator to initiate
expansion in the product to seal leaking cracks and joints in concrete and fill voids in generally inaccessible locations.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

NITOFILL PU130 20KG

FC300899-20KG 20KG 32 32 14-21
MTO
9300611569813

Fosroc Nitofill PU150

Nitofill PU150 is a multi-purpose hydrophilic polyurethane injection resin which reacts with available water to initiate expansion in the
product to seal leaking cracks and joints in concrete and fill voids in generally inaccessible locations.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

FC300900-20KG NITOFILL PU150 20KG 20KG 32 32 14-21

9300611569820

Fosroc Nitofill Accelerator

Nominated levels of Nitofill Accelerator are mixed with Nitofill PU130 or Nitofill PU150 polyurethane, to initiate expansion in the products.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

NITOFILL
FC300901-1KG ACCELERATOR 1KG 32 12 14-21
1KG MTO
9300611566966

20
 CONCRETE REPAIR
Fosroc Nitofill LV
Nitofill LV is a high strength, low viscosity resin injection system designed for injecting cracks in concrete, to consolidate a structure or
exclude water and air from contact with the reinforcement. Nitofill LV crack injection system incorporates a two-part epoxy base and
hardener contained in a twin cartridge pack or 15 litre pack.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

NITOFILL LV 450ML TWIN 450ML TWIN

FC344220-450ML 15
CARTRIDGE CARTRIDGE
9330221005197
NITOFILL LV 15L PACK

FC344216-5L NITOFILL LV 5L –

15 LITRE
9330221005203
PACK

FC344214-10L NITOFILL LV 10L –

9330221005227

NITOFILL LV CARTRIDGE
FC344221-UNIT – –
GUN
9330221005180

FC344222-UNIT NITOFILL LV FLANGE – –

9330221005173

FC344223-UNIT NITOFILL LV ADAPTER – –

9313863020056

NITOFILL LV STATIC MIXER/

FC344224-UNIT – –
HOSE
9313863029660

FC344225-UNIT NITOFILL LV FLANGE TOOL – –

9313863016790

Fosroc Nitofill Mechanical Packers

Nitofill Steel Packers are designed to be inserted into holes drilled into cracks or leaking joints and subsquently injected with expanding
polyurethane foam to stop water leaks.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

NITOFILL STEEL PACKER

FC344228-UNIT 10MM X 95MM 100
10MM X 95MM
9300611627285

NITOFILL STEEL PACKER

FC007019-UNIT 13MM X 100MM 100
13MM X 100MM
9300611616487

FC344226-UNIT NITOFILL COUPLER 4 JAW – 100

9300611627261

21
 CORROSION CONTROL SYSTEM

Galvashield XP
Galvashield XP range of embedded galvanic anode units utilise an innovative zinc anode core design surrounded by an enhanced
formulated cement-based mortar to provide corrosion mitigation to reinforced concrete structures. Once installed, the zinc anode
corrodes preferentially to the adjacent reinforcing steel, thereby providing galvanic corrosion prevention or corrosion control.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

GALVASHIELD XPT 25MM X 125MM

FC312016-UNIT 50
ONE AND DONE X 25MM
9300611621221

GALVASHIELD XP2 65MM X 80MM

FC312027-UNIT 40
ONE AND DONE X 30MM
9300611621238

GALVASHIELD XP4 65MM X 120MM

FC312026-UNIT 30
ONE AND DONE X30MM
9300611621214

Galvashield Fusion T2
Galvashield Fusion T2 combines an impressed current electrochemical treatment system with the long term maintenance-free
capabilities of an alkali-activated galvanic cathodic prevention system. The single-unit system does not require complex wiring or an
external DC power supply.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE BARCODE
CODE CARTON (DAYS)

GALVASHIELD FUSION T2 46MM X

FC312005-UNIT 20 60
100 MTO 100MM
9300611594921

GALVASHIELD FUSION T2 29MM X

FC312006-UNIT 20 60
135 MTO 135MM
9300611594938

GALVASHIELD FUSION T2 46MM X

FC312007-UNIT 20 60
100 PLUS MTO 100MM
9300611602886

GALVASHIELD FUSION T2 29MM X

FC312008-UNIT 20 60
135 PLUS MTO 135MM
9300611602893

22
 CONCRETE REPAIR
Galvashield CC
Galvashield CC is a discrete galvanic anode embedded within a specially formulated cementitious mortar. The Galvashield CC unit is
inserted into a pre-drilled hole and encapsulated within low resistivity mortar in a grid system for corrosion control and protection in, as
yet, undamaged concrete.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE BARCODE
CODE CARTON (DAYS)

GALVASHIELD CC65 46MM X

FC312031-UNIT 20 20
MTO 62MM
9330221005968

46MM X
FC312029-UNIT GALVASHIELD CC100 MTO 20 90
100MM
9330221005982

29MM X
FC312033-UNIT GALVASHIELD CC135 MTO 20 90
135MM
9330221005944

GALAVASHIELD CC ANODE
FC312071-UNIT – – 90
CONNECTION KIT MTO
9330221005715

GALAVASHIELD CC REBAR
FC312072-UNIT – – 90
CONNECTION KIT MTO
9330221005708

23
 Galvanode DAS
Galvanode DAS Marine is a distributed anode system designed to provide corrosion control or cathodic protection to concrete
structures in marine environments. Galvanode DAS Marine anode units are alkali-activated and not dependent on direct exposure
to salt water. This allows the anode units to provide excellent protection to concrete elements exposed to a range of conditions
(submerged, splash zone, periodic spray and atmospheric).

PRODUCT LEAD TIME

DESCRIPTION SIZE BARCODE
CODE (DAYS)

FC312119-UNIT GALVNODE MAR DAS 1.0M MTO EACH 90 –

FC312120-UNIT GALVNODE MAR DAS 1.2M MTO EACH 90 –

FC312160-UNIT GALVNODE DAS AA 0.9M 1.8KG/LM MTO EACH 75

9300611589583

FC312161-UNIT GALVNODE DAS AA 0.75M 1.8KG/LM MTO EACH 75

9300611589651

FC312115-UNIT GALVANODE MAR DAS 1.5M MTO 1.5M 90 –

FC312100-UNIT GALVANODE MAR DAS 1.8M MTO 1.5M 90 –

FC312162-UNIT GALVANODE DAS AA 0.5M 1.8KG/LM MTO 0.5M 75

9300611589675

FC312163-UNIT GALVANODE DAS AA 1.1M 1.8KG/LM MTO 1.1M 90 –

24
 CONCRETE REPAIR
Ebonex
Ebonex is a range of discrete anodes for impressed current cathodic protection (ICCP) of reinforcement steel in concrete structures.
Typical Applications: Carparks, bridges, wharfs and other marine structures.

PRODUCT LEAD TIME

DESCRIPTION SIZE BARCODE
CODE (DAYS)

FC312034-UNIT EBONEX ANODE CP10/100 MTO 10MM X100MM –

9330221005937

FC312035-UNIT EBONEX ANODE CP10/150 MTO 10MM X150MM –

9330221005920

FC312057-UNIT EBONEX ANODE CP18PLUS/200 18MM X 200MM –

9300611623218

FC312056-UNIT EBONEX ANODE CP18PLUS/300 18MM X 300MM –

9300611623225

FC312043-20KG EBONEX GROUT 20KG 20KG –

9300611623911

FC312047-UNIT EBONEX WIRE PACK 40M MTO 40M X 1.5M –

9330221005814

FC312046-UNIT EBONEX CRIMP PACK 80PC MTO – –

9330221005821

FC312049-UNIT EBONEX CRIMPING TOOL MTO – –

9300611623232

FC312048-UNIT EBONEX VENTING PACK MTO – –

9330221005807

FC312045-UNIT EBONEX CONNECTORS MTO – –

9300611625205

25
26
 CONCRETE REPAIR
GROUTS
CONBEXTRA®

Please always refer to the product TDS before making Grouts

your final selection or speak to your Fosroc representative.

27
 CEMENTITIOUS GROUTS

Please note many of our powdered bags products now have new and improved packaging. Product sizes and pallet quantities
for some products has changed. For the latest information regarding these changes please contact Fosroc customer service.

Fosroc Construction Grout

Construction Grout is a general purpose shrinkage compensated (Class A) cementitious, flowable or trowellable grout for gap thicknesses
from 10mm up to 100mm.
Typical applications: General site grouting and precast panel erection.

PRODUCT YIELD QTY PER

DESCRIPTION SIZE BARCODE
CODE (FLOWABLE) PALLET

CONSTRUCTION
FC501000-20KG 20KG 10.8L 50
GROUT 20KG
9330221006590

Fosroc Conbextra GP
Conbextra GP is a general purpose shrinkage compensated (Class A) cementitious, flowable or trowellable grout for gap thicknesses from
10mm up to 100mm. Conbextra GP has a 28 day compressive strength of 65 MPa when mixed at trowellable consistency.
Typical applications: General site grouting where higher compressive strength is required.

PRODUCT YIELD QTY PER

DESCRIPTION SIZE BARCODE
CODE (FLOWABLE) PALLET

FC501020-20KG CONBEXTRA GP 20KG 20KG 10.8L 50

9330221006569

Fosroc Conbextra C
Conbextra C is a dual shrinkage compensated, high flow cementitious grout for gap thicknesses from 10mm up to 100mm. Conbextra C
can be used as a flowable or trowel applied grout.
Typical applications: Under baseplates and other applications where a precision high flow grout is required.

PRODUCT YIELD QTY PER

DESCRIPTION SIZE BARCODE
CODE (FLOWABLE) PALLET

ONLY AVAILABLE IN AUSTRALIA

FC501040-20KG CONBEXTRA C 20KG 20KG 10.8L 50

9330221006545
ONLY AVAILABLE IN NEW ZEALAND

FC500587-25KG CONBEXTRA C 25KG 25KG 13.5L 40

9300611549129

28
Fosroc Conbextra HF
Conbextra HF is a dual shrinkage compensated high flow cementitious precision grout for gap thicknesses up to 125mm. Conbextra HF
has excellent flow retention properties.
Typical applications: Precision grouting where high flow and long flow property retention is required.

PRODUCT YIELD QTY PER

DESCRIPTION SIZE BARCODE
CODE (FLOWABLE) PALLET

FC501050-20KG CONBEXTRA HF 20KG 20KG 10.8L 50

9330221006538

GROUTS
Fosroc Conbextra HS
Conbextra HS is a dual shrinkage compensated, high flow cementitious grout used grouting applications where rapid strength gain
and high ultimate strength is a pre-requisite. Compressive strength of 26 MPa @ 8 hours and 95 MPa @ 28 days when mixed at
flowable consistency.
Typical applications: Grouting machine bases where quick back to service is required and/or high ultimate compressive strength.

PRODUCT YIELD QTY PER

DESCRIPTION SIZE BARCODE
CODE (FLOWABLE) PALLET

FC502000-20KG CONBEXTRA HS 20KG 20KG 9.8L 50

9330221006460

Fosroc Conbextra HES

Conbextra HES is a shrinkage compensated cementitious grout used for free flow grouting in a wide range of applications where rapid
strength gain is a pre-requisite. Conbextra HES has a compressive strength of 25 MPa @ 2 hours when mixed at flowable consistency.
Typical applications: Grouting machine bases where very quick return to service is required.

PRODUCT YIELD QTY PER

DESCRIPTION SIZE BARCODE
CODE (FLOWABLE) PALLET

CONBEXTRA HES
FC501060-20KG 20KG 10.2L 50
20KG
9330221006514

Fosroc Conbextra Deep Pour

Conbextra Deep Pour is a high flow, dual shrinkage compensated cementitious grout for grouting applications ranging from 20mm up to a
maximum of 500mm deep.
Typical applications: Grouting applications where deep sections up to 500mm exist.

PRODUCT YIELD QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE (FLOWABLE) PALLET (DAYS)

CONBEXTRA DEEP
FC501070-20KG 20KG 10.0L 50 – –
POUR 20KG
9330221006507

CONBEXTRA DEEP
FC501070-1000KG 1000KG 500L 1 2 14-21
POUR MTO 1000KG
9300611586636

29
Fosroc Conbextra UW
Conbextra UW a flowable under water cementitious grout which exhibits exceptional resistance to washing-out of the cement phase when
placed in stationary or moving water.
Typical applications: Grouting or concrete reinstatement in submerged conditions such as wharf piles.

PRODUCT YIELD QTY PER

DESCRIPTION SIZE BARCODE
CODE (FLOWABLE) PALLET

FC501030-20KG CONBEXTRA UW 20KG 20KG 11.6L 50

9330221006552

Fosroc Conbextra CB
Conbextra CB is a highly flowable high strength grout which can be used for various void fill applications including; backfilling behind
concrete tunnel segments and bottom up cable bolt grouting applications.
Typical applications: Grouting cable bolts and back filling tunnel segments.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE YIELD MOQ BARCODE
CODE PALLET (DAYS)

CONBEXTRA CB
FC501087-20KG 20KG 12 - 13.3 48 100 14-21
20KG MTO
9300611623270

Fosroc Renderoc BB
Renderoc BB is a high strength gain, low shrinkage mortar for the installation of elastomeric bridge bearings.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC300250-20KG RENDEROC BB 20KG 20KG 50

9330221006606

Fosroc Conbextra Grout Aggregate

Conbextra Grout Aggregate are chemically inert fillers (<5mm) for use with Conbextra EP65 and Conbextra Cementitious Grouts to
improve yield and allow deeper pours to be achieved.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

CONBEXTRA GROUT
FC502021-20KG 20KG 50
AGGREGATE 20KG
9330221006446

Foscroc Conbextra BB92

Ultra-high performance cementitious grout specifically designed for structural grouted connections for wind turbine foundations and oil
and gas installations.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

CONBEXTRA BB92 800

FC524478-25KG 25KG 40 90
MTO BAGS
9300611616500

30
Fosroc Conbextra TA
Cementitious grout, formulated for grouting the structural transition pieces of on-shore wind turbine foundations. Suitable for gap
depths in the range of 50 to 250 mm. Conbextra TA complies EN1504-6:2006.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

CONBEXTRA TA 800
FC524476-25KG 25KG 40 90
MTO BAGS
9300611616449

GROUTS
EPOXY GROUTS

Fosroc Conbextra EP10

Conbextra EP10 is a low viscosity epoxy grout for grouting small gaps (<10mm) between a base plate and substrate. Conbextra EP10 can
be used to fill hairline cracks in concrete slabs.
Typical applications: Grouting small gaps (<10mm) under baseplates and as a crack repair material.

PRODUCT QTY PER QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE CARTON PALLET (DAYS)

CONBEXTRA EP10 300ML PACK

CONBEXTRA EP10
FC523125-200ML 20 504 – –
BASE 200ML

300ML 9300611620941
PACK

CONBEXTRA EP10
FC523124-100ML 15 504 – –
HARDENER 100ML
9300611620958

CONBEXTRA EP10 1.5L

FC523120-1.5L 3 144 – –
1.5L PACK
19330221006245
CONBEXTRA EP10 15L PACK

CONBEXTRA EP10
FC523125-10L – 48 10 14-21
BASE 10L MTO

15L 9330221006224
PACK

CONBEXTRA EP10
FC523124-5L – 72 10 14-21
HARDENER 5L MTO
9330221006231

31
Fosroc Conbextra EP65 Plus
Conbextra EP65 Plus is an ultra high strength (125 MPa), 2 component epoxy grout. It is designed for use as a precision, heavy duty
grouting for gaps between 10mm and 100mm.
Typical applications: Grouting under baseplates, crane rails turbines where heavy dynamic loads are encountered and areas where
chemical spillage may occur.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

CONBEXTRA EP65 PLUS 14L PACK

CONBEXTRA EP65 PLUS

FC524460-11.5L 32
BASE 11.5L

14L
9330221153805
PACK

CONBEXTRA EP65 PLUS

FC524470-2.5L 108
HARDENER 2.5L
9330221153812

Fosroc Conbextra EP120

Conbextra EP120 is a 2 component epoxy grout for use in situations where heavy dynamic or mobile loads are encountered with gaps up
to 120mm. Also for use in conditions where chemical spillage may be encountered.
Typical applications: Grouting reciprocating machinery, heavy crane and transporter rails, high speed turbines, centrifuges and drop forges.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

CONBEXTRA EP120 14L PACK

CONBEXTRA EP120
FC522333-11.3L 32
BASE 11.3L

14L
9330221006316
PACK

CONBEXTRA EP120
FC522444-2.7L 108
HARDENER 2.7L
9330221006293

32
Fosroc Conbextra EP300 DP
Conbextra EP300 DP is a 3 component epoxy grout for use in applications where heavy dynamic or mobile loads are encountered with
gaps up to 300mm. Particularly well suited to applications where long working time and/or large volume grouting is required.
Typical applications: Grouting reciprocating machinery, heavy crane and transporter rails, high speed turbines, centrifuges and drop
forges. Also for use pile head waterproofing.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

CONBEXTRA EP300 DP 11.4L PACK

GROUTS
CONBEXTRA EP300
FC500547-2.7L 108
BASE 2.7L
9300611547033

CONBEXTRA EP300 11.4L

FC500545-860ML 360
HARDENER 860ML PACK
9300611547040

CONBEXTRA EP300 FILLERS

FC500546-20KG 50
20KG
9300611562586

Fosroc Conbextra EP935

Conbextra EP935 is a flowable epoxy grout suitable for underwater grouting work and for the repair of water immersed concrete structures.
Typical applications: Wharf and bridge piles

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

CONBEXTRA EP935 8.4L PACK

CONBEXTRA EP935
FC520010-6.65L BASE COMPONENT 32 63 14-21
6.65L MTO
8.4L
9330221006361
PACK
CONBEXTRA EP935
FC520015-1.75L HARDENER COMPONENT 32 63 14-21
1.75L MTO
9330221006354

33
34
WATER-
PROOFING
EARTH SHIELD® ∙ HYDROTITE® ∙ LEAKMASTER®
NITOBOND ∙ NITOPROOF ∙ NITOTILE
PROOFEX® ∙ SUPERCAST® ∙ SUPERSWELL®
∙
®

Please always refer to the product TDS before making Waterproofing

your final selection or speak to your Fosroc representative.

35
 PRE-APPLIED SHEET MEMBRANE

Fosroc Proofex Engage

Proofex Engage is a unique patented waterproofing membrane system comprising of a cell mesh bonded to a blended polyethylene/
polypropylene membrane which allows poured concrete to interlock, forming a tenacious mechanical bond.
Typical applications: Below ground waterproofing of basement walls and foundations

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

1.27M X
FC007070-UNIT PROOFEX ENGAGE 1.27X30M.
30M ROLL
9330221149266

200MM X
FC007071-UNIT PROOFEX ENGAGE DETAIL STRIP 10M
10M STRIP
9330221149259

125 X 125
FC007072-UNIT PROOFEX EXT CORNER
X 125MM
9330221149242

125 X 125
FC007073-UNIT PROOFEX INTERNAL CORNER
X 125MM
9330221149235

FC007075-28KG PROOFEX LM 28KG

9330221149211

FC007077-UNIT PROOFEX L SECTION 10M

9330221155526

110MM X 330
FC007078-UNIT PROOFEX TOP HAT 1 BASE
X 330MM
9300611612748

160MM X 360
FC007079-UNIT PROOFEX TOP HAT BASE
X 360MM
9300611612755

36
 SELF-ADHESIVE WATERPROOFING MEMBRANES

Fosroc Proofex 3100 (Replaces Emer Proof HDPE)

Self adhesive bituminous membrane incorporating a cross laminated HDPE film.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

PROOFEX 3100 1.5MM X 1MM

FC007067-UNIT 16
1.5MM X 1M X 20M ROLL X 20M ROLL
9300611612373

Fosroc Proofex 6100 (Replaces Emer Proof HD)

Woven polypropylene surfaced, bituminous self adhesive membrane.

WATERPROOFING
PRODUCT QTY PER
DESCRIPTION SIZE BARCODE
CODE PALLET

PROOFEX 6100 1.65MM X 1M

FC007068-UNIT 16
1.65MM X 1M X 20M ROLL X 20M ROLL
9300611612380

Fosroc Primer 24
Fosroc Primer 24 is the primer to be used prior to the application of Proofex and Torchseal self adhesive membranes to porous
substrates such as concrete.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC020500-4L PRIMER 24 4L 4L 108

9300611612540

FC020500-20L PRIMER 24 20L 20L 32

9300611612557

DRAINAGE CELLS AND PROTECTION BOARDS

Fosroc Proofex Sheetdrain 81 (Replaces Emer-Proof Drain V)

Proofex Sheetdrain 81 is a high-density polyethylene (HDPE) dimpled drainage membrane used for the protection and drainage of
waterproofing membranes used on foundations which are subsequently backfilled.
Typical applications: Draining below ground waterproofing applications.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

2M X
FC043073-UNIT PROOFEX SHEETDRAIN 81
20M ROLL
9300611582881

37
Fosroc Proofex Protection Board PP
Proofex Protection Board PP is a 3mm thick polypropylene, impact resistant membrane protection board. It is designed to give impact,
puncture and damage resistance to membrane systems.
Typical applications: Protection of waterproofing membranes from backfilling materials.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

PROOFEX PROTECTION 1.83M X

FC071079-UNIT
BOARD PP 1.2M ROLL
9330221148238

TORCH APPLIED MEMBRANES

Fosroc Proofex Torchseal A300 (Replaces Index Rollbase)

Polyester fabric backed base sheet, for heat sensitive substrates in multilayer torch-on bitumen membrane systems.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007010-UNIT PROOFEX TORCHSEAL A300 20 X 1M ROLL 20

9300611616135

Fosroc Proofex Torchseal A350 (Replaces Index Autotene Base P)

Self-adhesive 3 mm thick base sheet for heat sensitive substrates in multilayered torch on bitumen membrane systems.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007009-UNIT PROOFEX TORCHSEAL A350 10 X 1M ROLL 20

9300611617019

Fosroc Proofex Torchseal A400 (Replaces Index Vapour Diffuser)

Perforated reinforced base sheet to relieve water vapour pressure from under multi-layer torch-on bitumen membrane systems.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007011-UNIT PROOFEX TORCHSEAL A400 30 X 1M ROLL 25

9300611616142

38
Fosroc Proofex Torchseal A500 (Replaces Index Modo P)
Torch applied 3.5mm thick, reinforced elastoplastomeric polymer – bitumen waterproofing membrane.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007012-UNIT PROOFEX TORCHSEAL A500 10 X 1M ROLL 25

9300611616159

Fosroc Proofex Torchseal A600 (Replaces Index Fidia P)

Torch applied 3mm thick, reinforced polymer – bitumen waterproofing membrane. Used as a continuous waterproofing membrane for
foundations, basements and tunnels, particularly as the base layer of multi-layer systems.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

WATERPROOFING
FC007013-UNIT PROOFEX TORCHSEAL A600 10 X 1M ROLL 25

9300611616166

Fosroc Proofex Torchseal A625 (Replaces Index Fidia Mineral Grey)

Torch applied 4.5mm thick, mineral finish, reinforced polymer – bitumen waterproofing membrane. Used as the top layer in a two layer
membrane system or as a single roof membrane.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007014-UNIT PROOFEX TORCHSEAL A625 10 X 1M ROLL 20

9300611616173

Fosroc Proofex Torchseal A700 (Replaces Index Defend H)

Torch applied 4.5mm thick, ‘plant root repellent’ membrane, reinforced with rot-proof single strand non-woven polyester fabric. Applied
as the final waterproofing layer in contact with earth for gardens, foundations, underground structures and tunnels covered with soil
where there is a risk of the system being attacked by roots.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007015-UNIT PROOFEX TORCHSEAL A700 10 X 1M ROLL 20

9300611616180

Fosroc Proofex Torchseal A800 (Replaces Index Testudo 4mm)

Torch applied 4mm thick, reinforced elastoplastomeric polymer – bitumen waterproofing membrane used as a continuous waterproofing
membrane for foundations, basements and tunnels.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007016-UNIT PROOFEX TORCHSEAL A800 10 X 1M ROLL 23

9300611616197

39
Fosroc Proofex Torchseal A825 (Replaces Index Testdo Mineral)
Torch applied, 4.5kg/m², mineral finish, reinforced polymer – bitumen waterproofing membrane used as a continuous waterproofing
membrane for roofs and other UV exposed areas. May be used as the top layer in a two layer membrane system or as a single
roof membrane.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007017-UNIT PROOFEX TORCHSEAL A825 10 X 1M ROLL 23

9300611616203

Fosroc Proofex Torchseal A900

Torch applied 5mm thick, reinforced elastoplastomeric polymer – bitumen bridge deck waterproofing membrane characterised by a high
resistance to puncture and is therefore particularly suitable for single layer waterproofing systems where high mechanical resistance is
required such as bridge decks, road ways and viaducts.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC007018-UNIT PROOFEX TORCHSEAL A900 10 X 1M ROLL 16

9300611616210

Fosroc Proofex Torchseal Pressure SL Flash

Aluminium strip for sealing and flashing the edge of Torchseal sheet Membranes.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

PROOFEX TORCHSEAL
FC008019-UNIT – –
PRESSURE SL FLASH
9300611616487

Fosroc Primer 24
Fosroc Primer 24 is the primer to be used prior to the application of Proofex and Torchseal self adhesive membranes to porous
substrates such as concrete.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC020500-4L PRIMER 24 4L 4L 108

9300611612540

FC020500-20L PRIMER 24 20L 20L 32

9300611612557

40
 LIQUID APPLIED MEMBRANES

Fosroc Nitoprime 115 (Replaces Emer Proof Non Porous Primer)

Nitoprime 115 is a primer specifically designed with adhesion enhancing properties for use onto metallic, smooth, dense, and non
porous surfaces.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC000600-4L FOSROC NITOPRIME 115 4L 4L 120

9300611580603

Fosroc Nitoprime 120 (Replaces Emer Proof Porous Primer)

WATERPROOFING
Nitoprime 120 is a single component fast drying primer that provides excellent high bonding and penetrating properties into concrete
and masonry surfaces.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC000601-15L FOSROC NITOPRIME 120 15L 15L 32

9300611580610

Fosroc Nitoproof 210 (Replaces Emer-Proof Aqua Barrier Landscape)

Nitoproof 210 is a high performance single component water based bituminous rubberised liquid applied waterproofing membrane, which
contains root inhibiting additives.
Typical applications: Waterproofing applications such as retaining walls, planter boxes, building foundation walls & below ground
tanking structures.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC000605-15L NITOPROOF 210 15L 48

9300611580658

41
Fosroc Nitoproof 310 (Replaces Emer-Proof Aqua Barrier Undertile)
Nitoproof 310 is a fibre enhanced single component water based latex liquid applied membrane, designed for waterproofing applications
where the membrane is to be covered over with tiles, screeds or concrete beds.
Typical applications: Waterproofing balconies and wet areas which are being tiled over.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC000602-15L NITOPROOF 310 15L 15L 32

9300611580627

Fosroc Nitoproof 410 (Replaces Emer-Proof Aqua Barrier Quick Dry)

Nitoproof 410 is a water based, fast drying, flexible two component, polymer modified, cementitious waterproofing membrane designed
for under toppings, tiles and other protected environments. It may also be used for foot trafficable exposed roof top membranes and foot
trafficable exposed balcony decks when overcoated with Nitoproof Top Coat UV.
Typical applications: Waterproofing podiums, terraces, balconies and deck areas which will be protected.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

NITOPROOF 410 20L PACK

NITOPROOF 410 PART A

FC000603-12.5L 32
12.5L
9300611580634
20L PACK

NITOPROOF 410 PART B

FC000604-12.5KG 64
12.5KG
9300611580641

Fosroc Nitoproof 510 (Replaces Emer-Proof Aqua Barrier Vapour Control)

Nitoproof 510 is a grey, two-component, epoxy coating. When applied at 300 microns dry film thickness it will provide a moisture barrier
coating to restrict passage of dampness through concrete and masonry substrates.
Typical applications: Interior faces of walls, floors, basements, tunnels, cellars, retaining walls, lift wells and underground car parks.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

NITOPROOF 510 20L PACK

NITOPROOF 510 PART A

FC000610-10L 32
10L
9300611580702
20L PACK

NITOPROOF 510 PART B

FC000611-10L 64
10L
9300611580719

42
Fosroc Nitoproof 750 (Replaces Emer-Proof 750)
Nitoproof 750 is a single-component polyurethane liquid which cures by reaction with atmospheric moisture to give a tough elastomeric
waterproof membrane. Easy application at the recommended thickness to both vertical and horizontal surfaces.
Typical applications: Waterproofing foundations, basements, roofs, and tunnels.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC000609-15L NITOPROOF 750 15L 15L 32

9300611580696

Fosroc Nitoproof 810 (Replaces Emer-Proof Aqua Barrier Advanced)

Nitoproof 810 is a water based polyurethane single component membrane designed for a wide range of waterproofing applications in the
built environment. Nitoproof 810 is an alternative to solvent based and moisture curing polyurethane membranes.
Typical applications: Suitable for internal and external wet areas, enabling the direct fix of ceramic tiles, screeds, and renders over
the dried membrane using Nitotile Flex polymer modified cement based tile adhesive.

WATERPROOFING
PRODUCT QTY PER
DESCRIPTION SIZE BARCODE
CODE PALLET

FC000608-15L NITOPROOF 810 15L 15L 32

9300611580689

Fosroc Nitoproof Top Coat UV (Replaces Emer Proof Top Coat UV)
Nitoproof Top Coat UV is an acrylic hybrid, hard wearing top coat designed for external applications on horizontal surfaces. Nitoproof Top
Coat UV exhibits outstanding adhesion properties and excellent UV weather resistance.
Typical applications: Suitable for use as a trafficable top coat over Nitoproof 410 and the Nitoproof 810 membranes for roofs and deck areas.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

NITOPROOF TOP COAT UV

FC000606-15L 15L 32
(GREY) 15L
9300611580665

Fosroc Nitoproof Top Coat EW

Nitoproof Top Coat EW is a solvent free hybrid sealer designed for use over Nitoproof Top Coat UV to improve stain resistance and scuff marks
associated with pedestrian foot traffic. Nitoproof Top Coat EW exhibits excellent UV resistance and durability.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

NITOPROOF TOP COAT

FC000607-15L 15L 32 55 14-21
EW 15L MTO
9300611580672

43
Fosroc Polyurea WHE110
Fosroc Polyurea WHE110 is a spray-applied, 100% solids, flexible, two-component, rapid curing hybrid Polyurea-polyurethane system.
Designed as a waterproofing and protective coating.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

POLYUREA WHE110 42.5KG PACK

POLYUREA WHE110 PART A

FC007090-22.5KG 50
22.5 KG

42.5KG
9300611580252
PACK

POLYUREA WHE110 PART B

FC007091-20KG 50
20 KG
9300611580269
POLYUREA WHE110 425KG PACK

POLYUREA WHE110 PART A

FC007090-225KG 4
225KG

425KG
9300611575746
PACK

POLYUREA WHE110 PART B

FC007091-200KG 4
200KG
9300611575739

Fosroc Polyurea WPE110

Fosroc Polyurea WPE110 is a spray-applied, 100% solids, flexible, two-component, rapid curing pure Polyurea system. Designed as a
waterproofing and protective coating. Suitable for use in potable water applications, complies with AS/NZS 4020-2005.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

POLYUREA WPE110 42.5KG PACK

POLYUREA WPE110 PART A

FC007088-22.5KG 48
22.5KG

42.5KG 9300611580078
PACK

POLYUREA WPE110 PART B

FC007089-20KG 50
20KG
9300611580085
POLYUREA WPE110 425KG PACK

POLYUREA WPE110 PART A

FC007088-225KG 4
225KG

425KG 9300611575746
PACK

POLYUREA WPE110 PART B

FC007089-200KG 4
200KG
9300611575753

44
Fosroc Nitoprime 320 PU
Nitoprime 320PU is used to prime concrete before application of Fosroc Polyurea WHE110 and WPE110 membranes

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

FC007092-20KG NITOPRIME 320 PU 20KG 20KG

9300611580665

Fosroc Polyurea SCS

Fosroc Polyurea SCS is a thixotropic version, designed as an excellent seam seal for the Fosroc Proofex Engage waterproofing system.
Fosroc Polyurea SCS consists of the two components which are pumped through a static mixer gun to facilitate uniform mixing.
Typical applications: Sealing seams in Proofex Engage applications.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

WATERPROOFING
FOSROC POLYUREA SCS 600ML
FC007082-600ML 600ML 10
DUAL CARTRIDGE
9300611590688
POLYUREA SCS 42.5KG PACK

FOSROC POLYUREA SCS PART

FC007083-22.8KG
A 22.8KG
9300611590626
42.5KG PACK

FOSROC POLYUREA SCS PART

FC007084-21.6KG
B 21.6KG
9300611590633

CEMENTITIOUS WATERPROOFING

BB75-Z
Vandex BB75-Z is a surface applied, cement based render, waterproofing barrier for positive and negative water pressure applications. It
can be used on most masonry surfaces, including sandstone, provided surfaces are adequately prepared. Ideal for applications solving
when the pressure face is not easily accessible.
Typical applications: Waterproofing the inside face of swimming pools, sewerage processing tanks, concrete block walls and many
other masonry surfaces.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC051005-25KG VANDEX BB75-Z 25KG 25KG 40

7612940000625

45
 Elasticizer PK75
®

Vandex Elasticiser PK75 is mixed with Vandex BB75-Z to form Vandex BB75E-Z a crack accommodating cement based render,
waterproofing barrier for waterproofing of concrete and masonry structures, either positive or negative side, where live cracks up to 0.5mm
are present.
Typical applications: Ideal for solving the problem of water seepage through concrete and masonry where live cracks are present in
both new and old structures.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC051003-10KG VANDEX ELASTICIZER PK75 10KG 60

7612940000069

Cemelast
Vandex Cemelast is mixed with Vandex BB75-Z to form a flexible, surface applied, cement based render for waterproofing of concrete and
masonry structures, either positive or negative side, where live cracks up to 0.3mm are present.
Typical applications: Ideal for solving the problem of water seepage through concrete and masonry where live cracks are present in
both new and old structures.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC051009-9KG VANDEX CEMELAST 9KG 9KG 50

7612940000441

Concrete Grey
Vandex Concrete Grey is a slurry applied, concrete capillary penetrating, crystal growth, waterproofing system for positive and negative
water pressure applications.
Typical applications: waterproofing lift pits, basement walls, concrete floor slabs, balconies, water storage tanks, swimming pools,
sewerage treatment plants, canals and bridges.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

VANDEX CONCRETE GREY

FC051011-25KG 25KG 40
25KG
7612940000052

Plug
®

Vandex Plug is a rapid setting, plugging mortar used to stop water seepage through porous concrete and fast flowing water through cracks
and construction joints in concrete and masonry.
Typical applications: Plugging leaks in in-situ and precast concrete segments in tunnels, water storage tanks, sewerage mains and
processing tanks, basements, below ground car parks, access chambers, building foundations.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC000557-5KG VANDEX PLUG 5KG 5KG 100

7612940000212

FC051006-15KG VANDEX PLUG 15KG 15KG 36

7612940000168

46
 ®

Uni-Mortar 1-Z
Vandex Uni-Mortar 1-Z is a cement based reprofiling and waterproofing repair mortar - (6 mm to 12 mm thickness) primarily used for the
reprofiling of new and old concrete and masonry surfaces prior to the application of Vandex membranes.
Typical applications: Reprofilling concrete before application of Vandex membranes.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

VANDEX UNI-MORTAR 1-Z

FC051008-25KG 25KG 40
25KG
7612940000298

Construction Joint Tape

Vandex Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick which bridges and seals construction joints and
cracks in concrete structures. Vandex Construction Tape is installed using Vandex BB75E-Z or Cemelast.
Typical applications: Bridging construction joints and cracks in concrete structures.

WATERPROOFING
PRODUCT QTY PER
DESCRIPTION SIZE BARCODE
CODE PALLET

VANDEX CONSTRUCTION 180MM

FC051010-UNIT 64
JOINT TAPE X 30M ROLL
9330221148283

ADHESIVES AND TILE ADHESIVES

Fosroc Nitotile Flex (Replaces Emer-Proof Tilebond Flex)

Nitotile Flex is a premium grade, rubber modified, flexible white cement based tile adhesive designed for bonding most types of ceramic,
stone and mosaic tiles onto a variety of substrates including concrete, render, block work, plasterboard and fibre cement surfaces and to
fix tiles over most water based waterproofing membranes.
Typical applications: Adhering tiles to most Nitoproof waterproofing membranes.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC000618-20KG NITOTILE FLEX 20KG 20KG 50

9300611580801

47
 WATERPROOFING ACCESSORIES – LIQUID APPLIED

Fosroc Nitoband (Replaces Emer-Proof EJB)

Nitoband is an alternative to traditional bond breaking methods for sealing critical movement zones. The Nitoband System is an approved
bond breaker, conforming to AS 3740 and includes pre-fabricated corners and pipe penetration detailing squares for superior sealing in the
most critical of areas.
Typical applications: Bridging cracks and joints when using Nitoproof membranes.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

NITOBAND TAPE
FC000612-UNIT 120MM X 10M ROLL
120MM X 10M
9300611580726

NITOBAND CORNER
FC000614-UNIT 135MM X 135MM
INTERNAL 90°
9300611580740

NITOBAND CORNER
FC000615-UNIT 135MM X 135MM
EXTERNAL 270°
9300611598899

NITOBAND CORNER
FC000613-UNIT 135MM X 135MM
ADJUSTABLE INTERNAL
9300611580733

NITOBAND PIPE DETAILING

FC000616-UNIT <50MM
SQUARE SMALL
9300611580771

NITOBAND PIPE DETAILING

FC000617-UNIT <110MM
SQUARE MEDIUM
9300611580788

NITOBAND PIPE DETAILING

FC000618-UNIT <150MM
SQUARE LARGE
9300611580795

48
 WATERSTOP SYSTEMS

Fosroc Supercast PVC Waterstops

Supercast PVC waterstops are designed to provide an integral sealing system for movement and construction joints in cast or concrete.
The range consists of centrally placed profiles; Supercast Hydrofoil and Rearguard externally placed profiles. Supercast PVC waterstops
are available as straight lengths (rolls) and factory produced intersections.
Typical applications: Expansion and Construction joints in water retaining and water excluding structures such as tanks and basements.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

SUPERCAST PVC WATERSTOPS 250MM

FC020303-UNIT
HYDROFOIL 250MM X 12M X 12M ROLL
9330221123464

SUPERCAST PVC WATERSTOPS 200MM

FC020302-UNIT
HYDROFOIL 200MM X 15M X 15M ROLL

WATERPROOFING
9330221123471

SUPERCAST PVC WATERSTOPS 150MM

FC020301-UNIT
HYDROFOIL 150MM X 15M X 15M ROLL
9330221123488

SUPERCAST PVC WATERSTOPS 250MM

FC020360-UNIT
REARGUARD R 250MM X 12M X 12M ROLL
9330221123150

SUPERCAST PVC WATERSTOPS 200MM

FC020340-UNIT
REARGUARD R 200MM X 12M X 12M ROLL
9330221123259

SUPERCAST PVC WATERSTOPS 150MM

FC020330-UNIT
REARGUARD R 150MM X 12M X 12M ROLL
9330221123303

SUPERCAST PVC WATERSTOPS 250MM

FC020350-UNIT
REARGUARD S 250MM X 12M X 12M ROLL
9330221123204

Earth Shield TPV-TPER

Earth Shield TPV-TPER is a range of thermoplastic elastomeric rubber waterstops for joints in critical chemical, industrial and
environmental applications.
Typical applications: Primary and secondary containment, refineries, mining facilities, fueling depots, chemical plants and acid storage.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

EARTH SHIELD TPV-TPER 150MM

FC000291-UNIT
JP636 CENTREBULB 150MM X 15.2M ROLL
9330221121552

EARTH SHIELD TPV-TPER 230MM

FC000295-UNIT
JP936 CENTREBULB 230MM X 15.2M ROLL
9330221121514

EARTH SHIELD TPV-TPER 230MM

FC000286-UNIT
JP211 REAR GUARD 230MM X 15.2M ROLL
9330221121606

49
Hydrotite
Hydrotite is a hydrophilic waterstop which expands in a controlled manner in the presence of moisture to create a pressure seal within
construction joints in concrete structures.
Typical applications: Construction joints in water retaining and water excluding structures.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

2MM
FC000560-UNIT HYDROTITE DSS0220 ADH / 25M ROLL
X 25MM ROLL
9330221121187

7MM
FC000550-UNIT HYDROTITE CJ0725-3K ADH / 10M ROLL
X 10MM ROLL
9330221120920

10MM
FC000555-UNIT HYDROTITE CJ1020-2K ADH / 10M ROLL
X 10MM ROLL
19330221120903

16MM
FC000580-UNIT HYDROTITE RSS1610D / 10M ROLL
DIAMETER
19330221120842

20MM
FC000455-UNIT HYDROTITE RSS2014D / 10M ROLL
DIAMETER
19330221128855

22MM
FC000595-UNIT HYDROTITE RSS2205D / 10M ROLL
DIAMETER
19330221120811

25MM
FC000545-UNIT HYDROTITE RSS2519D / 5M ROLL
DIAMETER
19330221120934

Leakmaster
Leakmaster is a gun applied, water-swellable, waterstop paste for bonding Hydrotite profiles to rough concrete surfaces. It can also be
used as a stand-alone water sealing non-movement joints of cast in-situ concrete.
Typical applications: Pipe penetrations, rough surfaces such as shotcrete.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FC000785-UNIT LEAKMASTER 320ML 320ML 24

9330221120241

Superswell 47B
Superswell 47B is a high expansion butyl bentonite based hydrophilic waterstop for sealing joints between concrete.
Typical applications: Non-movement joints eg. horizontal construction joints between floor slabs and cast in situ walls such as lift
overrun pits and retaining walls.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

SUPERSWELL 47B
19MM X 12MM X
FC002205-UNIT 19MM X 12MM X 12MM 8
12MM X 7.5M ROLL
X 7.5M ROLL
19330221155653

SUPERSWELL 47B 25MM X 20MM

FC002200-UNIT 6
25MM X 20MM X 5M X 5M ROLL
19330221155646

50
JOINT FILLERS
& SEALANTS
CELLFLEX ∙ CONSEAL ∙ EXPANDAFOAM®
FLAMEX® ∙ HYDROCELL ∙ HYDROCOR
CORKJOINT ™ ∙ NITOSEAL® ∙ THIOFLEX®

Please always refer to the product TDS before making Joint Sealants
your final selection or speak to your Fosroc representative.
& Fillers

51
 GENERAL CONSTRUCTION SEALANTS

Fosroc Nitoseal MS250 (Replaces Duraflex)

Nitoseal MS250 is a resistant elastomeric joint sealant based on silyl modified polymers which provides excellent weathering and
adhesion performance. Nitoseal MS250 is paintable with waterbased paints.
Typical applications: Sealing moving or static joints in building facades and general construction where high UV resistance is required.

PRODUCT QTY PER QTY PER LEAD TIME

DESCRIPTION SIZE COLOUR MOQ BARCODE
CODE CARTON PALLET (DAYS)

NITOSEAL MS250
CONCRETE
FC920171-600ML CONCRETE GREY 600ML 12 960 – –
GREY
600ML
9300611592750

NITOSEAL MS250 FACTORY

FC930223-600ML SPECIAL COLOUR 600ML TINTED 12 960 400 14-21
MTO MTO
9300611598271

Fosroc Nitoseal MS400 (Replaces Duraflex FC)

Nitoseal MS400 is a trafficable, UV resistant elastomeric trafficable joint sealant based on silyl modified polymers which provide excellent
weathering and adhesion performance together with abrasion resistance.
Typical applications: Sealing moving or static joints in applications where high strength and abrasion resistance is required.

PRODUCT QTY PER QTY PER LEAD TIME

DESCRIPTION SIZE COLOUR MOQ BARCODE
CODE CARTON PALLET (DAYS)

NITOSEAL MS400
CONCRETE
FC920181-600ML CONCRETE GREY 600ML 12 960 – –
GREY
600ML
9300611592859

NITOSEAL MS400 SPECIAL

FC930202-600ML SPECIAL COLOUR 600ML COLOUR 12 960 400 14-21
600ML MTO MTO
9300611598288

NITOSEAL MS400 SPECIAL

FC920181-200L CONCRETE GREY 200L COLOUR – 4 4 14-21
200L MTO MTO
9300611592842

Fosroc Nitoseal PU250 (replaces Emer Seal PU25)

Nitoseal PU250 is a high performance elastomeric polyurethane joint sealant which forms a waterproof and durable seal making it ideal
for vertical exterior applications such as sealing joints in concrete panels, fibrous cement products, external cladding panels, blockwork
and brickwork.
Typical applications: Sealing moving or static joints in building facades, general construction, windows and door frames.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

NITOSEAL PU250
FC920112-600ML 600ML 12 1440
CONCRETE GREY 600ML
9300611589927

52
Fosroc Nitoseal PU400 (replaces Emer Seal PU40)
Nitoseal PU400 is a medium modulus, elastomeric polyurethane joint sealant/adhesive which forms a waterproof and durable seal. It is
ideal for exterior applications such as sealing joints and bonding between most construction materials, where a high bond strength and
abrasion resistance is required. Suitable for water immersed applications and trafficable surfaces.
Typical applications: Sealing moving or static joints in applications where high strength and abrasion resistance is required.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

NITOSEAL PU400 CONCRETE

FC920121-600ML 600ML 12 1440
CONCRETE GREY 600ML GREY
9300611589965

NITOSEAL PU400
FACTORY
FC920122-200L CONCRETE GREY 200L 200L – 4
TINTED
MTO
9300611589972

Fosroc Nitoseal MB175

Nitoseal MB175 is a rubberised bitumen, mastic joint sealant compatible with bitumen based materials.
Typical applications: Sealing joints in retaining walls, sealing terminations and detailing of bitumen based waterproofing membranes.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

FC900222-600ML NITOSEAL MB175 600ML 600ML 10 800

JOINT FILLERS
FILLERS
& SEALANTS
SEALANTS
9330221125161

JOINT
&
FIRE RATED SEALANTS

Fosroc Flamex One

Flamex One is a fire rated, one-component, acrylic joint sealant for sealing low movement interior joints requiring a fire rating of up to 4 hours.
Typical applications: Sealing joints in partition walls and other internal joints in concrete walls.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

FLAMEX ONE CONCRETE

FC920025-600ML 600ML 20 780
CONCRETE GREY 600ML GREY
9330221124812

Fosroc Flamex PU
Flamex PU is a fire rated, high performance, flexible, one-component, polyurethane sealant for sealing exterior and interior movement
joints where a fire rating of up to 4 hours is required.
Typical applications: Sealing joints in external concrete walls requiring fire rating.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

FLAMEX PU CONCRETE
FC920035-600ML 600ML 12 864
CONCRETE GREY 600ML GREY
9330221124805

53
Fosroc Flamex XT
Flamex XT is a high performance fire and acoustic rated elastomeric joint sealant based on silyl modified polymers for sealing exterior and
interior movement joints where a fire rating of up to 4 hours is required.
Typical applications: Sealing joints in internal and external concrete walls requiring fire rating and acoustic rating.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

FLAMEX XT
CONCRETE
FC920045-600ML CONCRETE GREY 600ML 12 960
GREY
600ML
9300611586223

CIVIL CONSTRUCTION SEALANTS

Fosroc Nitoseal SC600 (Replaces Emer Seal CR)

Nitoseal SC600 is a one part, gun applied joint sealant designed for sealing joints exposed to aggressive chemical environments. Nitoseal
SC600 is resistant to attack from most of the aggressive chemicals used in the food, mining and chemical processing industries. Complies
to AS4020:2018.
Typical applications: Sealing joints in chemical acidic and alkali environments as well as biological environments such as water
and wastewater.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

NITOSEAL SC600 CONCRETE

FC920100-600ML 600ML 12 960
CONCRETE GREY 600ML GREY
9300611589866

NITOSEAL SC600 POOL

FC920101-600ML 600ML 12 960
POOL BLUE 600ML BLUE
9300611589873

NITOSEAL SC600
FC920102-600ML 600ML WHITE 12 960
WHITE 600ML
9300611589880

Fosroc Nitoseal SC800 (Replaces Emerseal SC800)

Nitoseal SC800 is a low modulus, high joint movement accommodation, one component silicone rubber joint sealant.
Typical applications: Sealing high movement joints in concrete roads and other pavements.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

NITOSEAL SC800
CONCRETE
FC920130-600ML CONCRETE GREY 600ML 12 960
GREY
600ML MTO
9300611592651

54
Fosroc Nitoseal SC820 (Replaces Emer Seal Roadseal SL)
Nitoseal SC820 is a low modulus, self-smoothing, one component, silicone joint sealant for sealing sawn joints abutment joints between
concrete and asphalt roads and pavements; slot sealing of cable installations in asphalt and concrete pavements.
Typical applications: Sealing joints between concrete and asphalt in roads and other pavements.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

NITOSEAL SC820
CHARCOAL
FC920140-600ML CHARCOAL GREY 600ML 12 960
GREY
600ML
9300611592682

Fosroc Thioflex 555

Thioflex 555 is a fast curing, self smoothing, two component, polysulphide sealant designed for rapid cure and minimal back to service time.
Typical applications: Suitable for sealing areas where fuel spillage might occur such as aircraft fueling areas, oil terminals, garage
forecourts, parking and cargo areas.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

THIOFLEX 555 5L PACK

FC900524-2.5L THIOFLEX 555 BASE 2.5L

5010416011168
5L PACK

JOINT FILLERS
& SEALANTS
FC900525-2.5L THIOFLEX 555 HARDENER 2.5L

5010416000759

Fosroc Thioflex 600 Pouring Grade

Thioflex 600 Pouring Grade is a fuel resistant, two-component, pouring grade, polysulphide joint sealant for horizontal movement joints for
sealing horizontal movement joints in concrete.
Typical applications: Sealing horizontal joints in civil engineering structures including roads, bridges and airfields.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

THIOFLEX 600 POURING GRADE 4L PACK

THIOFLEX 600 POURING GRADE GREY

FC920400-3.7L 4
BASE 3.7L

4L 9300611621115
PACK

THIOFLEX 600 POURING GRADE

FC920401-300ML 24
GREY CURING COMPOUND 0.3L
9300611621122
THIOFLEX 600 POURING GRADE 16L PACK

THIOFLEX 600 POURING GRADE

FC920416-14.8L –
BASE 14.8L

16L 9330221124782
PACK

THIOFLEX 600 POURING GRADE

FC920418-1.2L –
HARDENER 1.2L
9330221124775

55
Fosroc Thioflex 600 Gun Grade
Thioflex 600 Gun Grade is a fuel resistant, high joint movement accommodation, two-component, polysulphide, gun applied joint sealant
for sealing movement joints in concrete structures.
Typical applications: Sealing joints in civil engineering structures, including roads, bridges and airfields.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FOSROC THIOFLEX 600 GUN GRADE 6L PACK

FOSROC THIOFLEX 600 GUN GRADE

FC920422-5.5L –
GREY BASE 5.5L

6L
9300611621139
PACK

FOSROC THIOFLEX 600 GUN GRADE

FC920423-500ML 10
GREY CURING COMPOUND 0.5L
9300611621146

Fosroc Expoband 110

Expoband 110 is a highly flexible, chemically resistant, joint bandage membrane system designed to be bonded (using Nitomortar AP)
over movement joints or cracks in a structure to prevent the ingress of water and chemicals.
Typical applications: Used to seal joints in car park decks, podiums, balconies, walkways and other elevated structures, where the
Expoband 110 can be protected from mechanical damage by a cover plate as well as water immersed applications such as tanks, sewers,
reservoirs, pipelines and swimming pools.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE CARTON (DAYS)

EXPOBAND 110 1MM X 100MM

FC020430-UNIT 3 – –
100MM X 1MM X 25M ROLL
9330221124744

EXPOBAND 110 2MM X 150MM

FC020441-UNIT 5 – –
150MM X 2MM X 25M ROLL
19330221124710
19330221124710

EXPOBAND 110 1MM X 200MM

FC020432-UNIT 2 100 21-28
200MM X 1MM MTO X 25M ROLL
19330221124734
19330221124734

EXPOBAND 110 2MM X 200MM

FC020442-UNIT 5 – –
200MM X 2MM X 25M ROLL
9330221124706

EXPOBAND 110 2MM X 300MM

FC020443-UNIT 5 100 21-28
300MM X 2MM MTO X 25M ROLL
9300611584588

56
 PRIMERS

Fosroc Primer 4
Primer 4 is a primer used on non porous surfaces with Thioflex 600 and other joint sealants - refer to the sealant technical data sheet
for guidance.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FC965207-250ML PRIMER 4 250ML 250ML 20

9330221123976

Fosroc Primer 7
Primer 7 is a primer used on porous surfaces with Thioflex 600 Pouring Grade.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FC965209-1L PRIMER 7 1L 1L 12

9330221123969

Fosroc Primer 7E

JOINT FILLERS
& SEALANTS
Primer 7E is a primer used in concrete joints in concrete roads, concrete runways and hard standings with Thioflex 555.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

THIOFLEX PRIMER 7E 1L PACK

FC900526-600ML PRIMER 7E BASE 600ML

5010416003774
1L PACK

FC900527-400ML PRIMER 7E HARDENER 400ML

5010416010727

57
Fosroc Primer 10
Primer used on porous surfaces with silicone sealants.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FC965214-250ML PRIMER 10 250ML 250ML 20

9330221123938

Fosroc Primer 13
Primer 13 is a two component, epoxy primer used on porous surfaces with Nitoseal PU400 and Nitoseal SC600 in immersed
conditions.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

PRIMER 13 250ML PACK

FC965229-125ML PRIMER 13 BASE 125ML 25

9300611589255
250ML PACK

FC965230-125ML PRIMER 13 HARDENER 125ML 25

9300611589262
PRIMER 13 1L PACK

FC965229-500ML PRIMER 13 BASE 500ML 10

9300611590299
1L PACK

FC965230-500ML PRIMER 13 HARDENER 500ML 10

9300611590305

Fosroc Primer 21
Primer 21 is a primer used on porous surfaces with Nitoseal PU250 & Nitoseal PU400 if required.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FC965228-250ML PRIMER 21 250ML 250ML 20

9330221123884

58
 PRECAST CONCRETE JOINTING

Conseal CS231
Conseal CS231 is a low expansion sealing gasket for construction joints in pre-cast and in-situ concrete. Conseal CS231 is compressible
within the joint and will provide an immediate and effective seal followed by controlled expansion.
Typical applications: Sealing non-moving joints in pre-cast structures or between in-situ pours and existing concrete applications and
as sealing strips for manholes, pipe penetrations and box culvertsand wastewater.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

CONSEAL CS231 25MM X 25MM X 12MM

FC702210-UNIT
25MM X 25MM X 12MM X 5M ROLL X 5M ROLL
19330221155660

CONSEAL CS231 19MM X 12MM X 12MM

FC702215-UNIT
19MM X 12MM X 12MM X 7.5M ROLL 7.5M ROLL
19330221155677

Proofex S (Replaces Conwrap HD)

Proofex S is an externally applied woven polypropylene tape coated with a modified bituminous self-adhesive compound. Proofex S is
normally used in conjunction with internally placed Conseal CS231 sealing strip.
Typical applications: Sealing joints in pre-cast elements such as box culverts.

JOINT FILLERS
& SEALANTS
PRODUCT QTY PER
DESCRIPTION SIZE BARCODE
CODE CARTON

100MM X 20M
FC700370-UNIT FOS PROOFEX S100 20M ROLL 5
ROLL
9300611612397

150MM X 20M
FC700371-UNIT FOS PROOFEX S150 20M ROLL 3
ROLL
9300611612403

200MM X 20M
FC700372-UNIT FOS PROOFEX S200 20M ROLL 2
ROLL
9300611612519

250MM X 20M
FC700373-UNIT FOS PROOFEX S250 20M ROLL 2
ROLL
9300611612526

300MM X 20M
FC700374-UNIT FOS PROOFEX S300 20M ROLL 1
ROLL
9300611612533

59
 JOINT FILLERS AND BACKING RODS

Fosroc Expandafoam
Expandafoam is a closed-cell polyethylene joint filler for use as an expansion joint filler in brick and blockwork, isolation joints and as back-
up strips for elastomeric sealants placed in narrow joints in concrete floors subject to foot traffic and light wheel loads.
Typical applications: Joint filler in concrete and masonry wall and pavement joints.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

1.2M X 2.4M
FC700605-UNIT EXPANDAFOAM 10MM
SHEET
9330221120791

1.2M X 2.4M
FC700610-UNIT EXPANDAFOAM 12MM
SHEET
9330221120753

1.2M X 2.4M
FC700615-UNIT EXPANDAFOAM 15MM
SHEET
9330221120746

1.2M X 2.4M
FC700623-UNIT EXPANDAFOAM 20MM
SHEET
9330221120739

1.2M X 2.4M
FC700625-UNIT EXPANDAFOAM 25MM
SHEET
9330221120708

1.2M X 2.4M
FC700630-UNIT EXPANDAFOAM 30MM
SHEET
9330221120692

1.2M X 2.4M
FC700635-UNIT EXPANDAFOAM 40MM
SHEET
9330221120685

1.2M X 2.4M
FC700640-UNIT EXPANDAFOAM 50MM
SHEET
9330221120678

75MM X 10MM
FC700690-UNIT EXPANDAFOAM 75MM X 10MM
X 25M ROLL
9330221120531

100MM X 10MM
FC700650-UNIT EXPANDAFOAM 100MM X 10MM
X 25M ROLL
9330221120661

10MM X 75MM
FC700195-UNIT EXPANDAFOAM SELF ADHESIVE 10MM X 75MM 
X 25M ROLL
9330221121859

60
Fosroc Expandafoam (Continued)
PRODUCT LEAD TIME
DESCRIPTION SIZE MOQ BARCODE
CODE (DAYS)

EXPANDAFOAM SELF ADHESIVE 10MM X 100MM

FC700170-UNIT – –
10MM X 100MM X 25M ROLL
9330221121903

EXPANDAFOAM SELF ADHESIVE 10MM X 125MM

FC700173-UNIT – –
10MM X 125MM X 25M ROLL
9330221121897

EXPANDAFOAM SELF ADHESIVE 10MM X 150MM

FC700180-UNIT – –
10MM X 150MM X 25M ROLL
9330221121880

EXPANDAFOAM SELF ADHESIVE 10MM X 200MM

FC700185-UNIT – –
10MM X 200MM X 25M ROLL
9330221121873

EXPANDAFOAM SELF ADHESIVE 10MM X 250MM

FC700160-UNIT – –
10MM X 250MM X 25M ROLL
9330221121927

EXPANDAFOAM SELF ADHESIVE 10MM X 300MM

FC700190-UNIT – –
10MM X 300MM X 25M ROLL
9330221121866

JOINT FILLERS
& SEALANTS
EXPANDAFOAM EASY FORM 75MM X 10MM
FC701175-UNIT 15 21-28
75MM MTO X 25M
9330221154123

EXPANDAFOAM EASY FORM 100MM X 10MM

FC701180-UNIT 12 21-28
100MM MTO X 25M ROLL
9330221154130

EXPANDAFOAM EASY FORM 150MM X 10MM

FC701190-UNIT 8 14-21
150MM MTO X 25M ROLL
9330221154154

EXPANDAFOAM EASY FORM 200MM X 10MM

FC701195-UNIT 6 14-21
200MM MTO X 25M ROLL
9330221154161

EXPANDAFOAM EASY FORM 300MM X 10MM

FC701205-UNIT 4 14-21
300MM MTO X 25M ROLL
9330221154185

EXPANDAFOAM EASY FORM 250MM X 10MM

FC701200-UNIT 4 14-21
250MM MTO X 25M ROLL
9330221154178

EXPANDAFOAM EASY FORM 50MM X 10MM

FC701170-UNIT 24 14-21
50MM MTO X 25M ROLL
9330221154116

EXPANDAFOAM EASY FORM 125MM X 10MM

FC701185-UNIT 9 14-21
125MM MTO X 25M ROLL
9330221154147

61
Fosroc Expandafoam Closed Cell
Expandafoam Closed Cell is a polyethylene foam rod supplied in circular section cords of varying diameters. Expandafoam Closed Cell is
used in conjunction with joint sealants in expansion joints.
Typical applications: Primarily used in expansion joints but is also suitable for use in any joint system requiring a readily compressible
joint filler.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

EXPANDAFOAM CLOSED CELL

FC700972-UNIT 6MM X 250M ROLL
6MM DIAMETER
9300611568632

EXPANDAFOAM CLOSED CELL

FC700973-UNIT 100MM X 250M ROLL
10MM DIAMETER
9300611568649

EXPANDAFOAM CLOSED CELL

FC700974-UNIT 13MM X 100M ROLL
13MM DIAMETER
9300611568656

EXPANDAFOAM CLOSED CELL

FC700975-UNIT 150MM X 100M ROLL
15MM DIAMETER
9300611568663

EXPANDAFOAM CLOSED CELL

FC700976-UNIT 20MM X 60M ROLL
20MM DIAMETER
9300611568687

EXPANDAFOAM CLOSED CELL

FC700977-UNIT 25MM X 50M ROLL
25MM DIAMETER
9300611568694

EXPANDAFOAM CLOSED CELL

FC700978-UNIT 300MM X 50M ROLL
30MM DIAMETER
9300611568700

EXPANDAFOAM CLOSED CELL

FC700979-UNIT 40MM X 2M STRIP
40MM DIAMETER
9300611568717

EXPANDAFOAM CLOSED CELL

FC700980-UNIT 50MM X 2M STRIP
50MM DIAMETER
9300611568724

62
Fosroc Expandafoam Open Cell
Expandafoam Open Cell is an open cell polyurethane foam rod supplied in circular section cords of varying diameters. Expandafoam
Open Cell is primarily used in expansion joints which are to be subsequently sealed with one component polyurethane and similar
sealants.
Typical applications: Used as a backing rod with joints sealants in concrete and masonry joints.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

EXPANDAFOAM OPEN CELL

FC700981-UNIT 16MM X 150M ROLL
16MM DIAMETER
9300611568731

EXPANDAFOAM OPEN CELL

FC700982-UNIT 22MM X 100M ROLL
22MM DIAMETER
9300611568748

EXPANDAFOAM OPEN CELL

FC700983-UNIT 29MM X 60M ROLL
29MM DIAMETER
9300611568755

EXPANDAFOAM OPEN CELL

FC700984-UNIT 38MM X 30M ROLL
38MM DIAMETER
9300611568762

EXPANDAFOAM OPEN CELL

FC700985-UNIT 50MM X 20M ROLL
50MM DIAMETER

JOINT FILLERS
9300611568779

& SEALANTS

63
Fosroc Hydrocor Corkjoint – Type 3 / Type 106
Hydrocor Type 106 is a range of self expanding cork filler used for forming, filling and sealing expansion and static joints.
Typical applications: Filling joints in water retaining structures, water excluding structures.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

FC771040-UNIT HYDROCOR CORKJOINT TYPE 106 12MM MTO 12MM

9330221123778

FC771050-UNIT HYDROCOR CORKJOINT TYPE 106 20MM MTO 20MM

9330221123754

FC7SEC10-UNIT HYDROCOR CORKJOINT TYPE 3 10MM MTO 10MM

9330221125369

FC7SEC12-UNIT HYDROCOR CORKJOINT TYPE 3 12MM MTO 12MM

9330221125352

FC7SEC15-UNIT HYDROCOR CORKJOINT TYPE 3 15MM MTO 15MM

9330221125345

FC7SEC20-UNIT HYDROCOR CORKJOINT TYPE 3 20MM MTO 20MM

9330221125321

FC7SEC25-UNIT HYDROCOR CORKJOINT TYPE 3 25MM MTO 25MM

9330221125314

FC7SEC30-UNIT HYDROCOR CORKJOINT TYPE 3 30MM MTO 30MM

9330221125307

FC750000-UNIT HYDROCOR CORKJOINT TYPE 3 1500MM X 100MM 10M

9330221155038

FC750002-UNIT HYDROCOR CORKJOINT TYPE 3 1500MM X 125MM 10M

9330221155014

FC750003-UNIT HYDROCOR CORKJOINT TYPE 3 1500MM X 150MM 12M

9330221155007

FC750004-UNIT HYDROCOR CORKJOINT TYPE 3 1500MM X 200MM 10M

9330221154994

64
Fosroc Hydrocell (Replaces Stiffjoint)
Hydrocell is a semi-rigid, UV resistant, cross-linked, non-absorbent, closed-cell polyethylene sheet material used to support joint sealants
in expansion joints.
Typical applications: Used in conjunction with suitable joint sealants in water retaining structures and in joints subject to wheel loads.

PRODUCT LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE (DAYS)

10MM X 2.4M
FC701000-UNIT HYDROCELL 10MM – –
X 1.2M SHEET
9330221130080

15MM X 2.4M
FC701010-UNIT HYDROCELL 15MM – –
X 1.2M SHEET
9330221130066

20MM X 2.4M
FC701015-UNIT HYDROCELL 20MM – –
X 1.2M SHEET
9330221130059

100MM X 10MM
FC700850-UNIT HYDROCELL 100MM X 10MM MTO 360 14-21
X 1.4M STRIP
9330221127530

75MM X 10MM
FC700920-UNIT HYDROCELL 75MM X 10MM MTO 960 14-21
X 1.5M STRIP
9330221127455

100MM X 10MM
FC720975-UNIT HYDROCELL 100MM X 10MM – –
X 1.5M STRIP
9330221130134

JOINT FILLERS
& SEALANTS
125MM X 10MM
FC700870-UNIT HYDROCELL 125MM X 10MM – –
X 1.5M STRIP
9330221127516

50MM X 10MM
FC701045-UNIT HYDROCELL 50MM X 10MM – –
X 2.4M STRIP
9330221129985

75MM X 10MM
FC701050-UNIT HYDROCELL 75MM X 10MM – –
X 2.4M STRIP
9330221129978

100MM X 10MM
FC720980-UNIT HYDROCELL 100MM X 10MM – –
X 2.4M STRIP
9330221130127

125MM X 10MM
FC700990-UNIT HYDROCELL 125MM X 10MM – –
X 2.4M STRIP
9330221130103

150MM X 10MM
FC700995-UNIT HYDROCELL 150MM X 10MM – –
X 2.4M STRIP
9330221130097

200MM X 10MM
FC701030-UNIT HYDROCELL 200MM X 10MM – –
X 2.4M STRIP
9330221130011

FC701035- 250MM X 10MM

HYDROCELL 250MM X 10MM MTO 20 14-21
UNIT X 2.4M STRIP
9330221130004

FC701040-UNIT HYDROCELL 300MM X 10MM MTO 2.4M STRIP 20 14-21

9330221129992

65
Fosroc Cellflex
Cellflex is a compressible, non-extruding, bitumen impregnated, fibreboard expansion joint filler supplied in sheet form strips.
Typical applications: Used to form and fill expansion joints in in-situ concrete such as pavements and footpaths.

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

60MM X 9.5MM
FC700336-UNIT CELLFLEX 60MM X 9.5MM
X 2.44M STRIP
9330221121279

75MM X 9.5MM
FC700335-UNIT CELLFLEX 75MM X 9.5MM
X 2.44M STRIP
9330221121286

100MM X 9.5MM
FC700312-UNIT CELLFLEX 100MM X 9.5MM
X 2.44M STRIP
9330221121361

125MM X 9.5MM
FC700340-UNIT CELLFLEX 125MM X 9.5MM
X 2.44M STRIP
9330221121262

150MM X 9.5MM
FC700315-UNIT CELLFLEX 150MM X 9.5MM
X 2.44M STRIP
9330221121330

200MM X 9.5M
FC700325-UNIT CELLFLEX 200MM X 9.5MM
X 2.44M STRIP
9330221121309

100MM X 12MM
FC700313-UNIT CELLFLEX 100MM X 12MM
X 2.44M STRIP
9330221121347

300MM X 9.5MM
FC700330-UNIT CELLFLEX 300MM X 9.5MM
X 2.44M SHEET
9330221121293

900MM X 9.5MM
FC700350-UNIT CELLFLEX 900MM X 9.5MM
X 2.44M STRIP
9330221121255

1.22M X 12MM
FC761300-UNIT CELLFLEX 1.22M X 12MM
X 2.2M SHEET
9330221124393

66
Fosroc Bond Breaker Tape
Bond Breaker Tape is used in joint sealing applications to ensure sealant only adheres to two faces of the joint. Polyethylene tape for
isolating sealant and eliminating adhesion to filler boards

PRODUCT
DESCRIPTION SIZE BARCODE
CODE

BOND BREAKER TAPE

FC071061-UNIT 15MM X 66M ROLL
15MM X 66M ROLL
9330221123723

BOND BREAKER TAPE

FC071062-UNIT 20MM X 66M ROLL
20MM X 66M ROLL
9330221123716

BOND BREAKER TAPE

FC071063-UNIT 25MM X 66M ROLL
25MM X 66M ROLL
9330221123709

BOND BREAKER TAPE

FC071064-UNIT 50MM X 66M ROLL
50MM X 66M ROLL
9330221123693

JOINT FILLERS
& SEALANTS

67
68
INDUSTRIAL
FLOORING
CEMTOP® ∙ NITOFLOR®
NITOMORTAR ∙ NITOPRIME

Please always refer to the product TDS before making Industrial Flooring
your final selection or speak to your Fosroc representative.

69
 HARDENERS, DENSIFIERS AND SEALERS

Fosroc Nitoflor HD (Replaces Durafloor HD)

Lithium silicate hardener/densifier. Used on new or existing internal floor to improve the dust, wear and abrasion resistance while
maintaining the concrete appearance. Nitoflor HD is also used in the process of polishing concrete by hardening the concrete surface
before grinding/polishing.
Typical applications: Manufacturing facility floors, warehouse floors and storage facility floors.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

FC605105-5L NITOFLOR HD 5L 5L CLEAR 4 144

9300611582386

FC605105-20L NITOFLOR HD 20L 20L CLEAR – 32

9300611582379

Fosroc Nitoflor HD-S (Replaces Durafloor HD-S)

Used in-conjunction with Nitoflor HD to improve stain resistance and provide higher sheen level finish - typically low sheen. Ideal for
polished concrete.
Typical applications: Manufacturing facility floors, warehouse floors, restaurants & retail environments, supermarkets and grocery
stores and storage facility floors.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE CARTON PALLET

FC605110-5L NITOFLOR HD-S 5L 5L CLEAR 4 144

9300611582409

FC605110-20L NITOFLOR HD-S 20L 20L CLEAR – 32

9300611582393

Fosroc Nitoflor FC100

UV stable, solvent based acrylic sealer for concrete floors to assist dustproofing and provide a more easily cleaned surface with resistance
to penetration of oils and other liquids. Produces a semi-gloss finish.
Typical applications: Warehouses, car parks and light industrial buildings.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC610002-
NITOFLOR FC100 CLEAR 20L 20L CLEAR 32
20L
9330221081160

FC661574-
NITOFLOR FC100 T&G GREY 20L 20L GREY 32
20L
9330221080156

70
Fosroc Nitoflor Sicaltop
Silicon carbide/alumina dry shake on floor hardener. Provides a non-rusting, extremely hard wearing, abrasion and slip resistant surface to
new concrete floors.
Typical applications: Ideally suited to industrial areas subject to the heaviest traffic, e.g. loading bays, trucking lanes, car parks,
warehouse floors, repair workshops, machine shops.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC602040-
NITOFLOR SICALTOP GREY 20KG. 20KG GREY 50
20KG
9330221081825

CEMENTITIOUS FLOORING SYSTEMS

Fosroc Nitoprime 330 (Replaces Durafloor Level Prime)

Concentrated primer for Cemtop GP Advanced & Cemtop XD. Seals the substrate to prevent pinholes, promote adhesion and help
prevent desiccation of the floor topping.
PRODUCT QTY PER QTY PER
DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

FC605120-1L NITOPRIME 330 PRIMER 1L 1L 6 144

9300611582454

FC605120-5L NITOPRIME 330 PRIMER 5L 5L 4 144

9300611582478

FC605120-20L NITOPRIME 330 PRIMER 20L 20L – 32

9300611582461

INDUSTRIAL
FLOORING
Please note many of our powdered bags products now have new and improved packaging. Product sizes and pallet quantities
for some products has changed. For the latest information regarding these changes please contact Fosroc customer service.

Fosroc Cemtop GP Advanced

Self smoothing, cementitious levelling mortar used as an underlay for carpet and tiles. Low VOC and fast cure. Apply at 2mm - 50mm
thickness. Can also be applied by pump for large areas. Suitable for new construction and refurbishment of concrete floors.
Typical applications: Levelling of residential and commercial floors.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC630088-20KG CEMTOP GP ADVANCED 20KG 20KG GREY 50

9300611620644

71
Fosroc Cemtop XD
Thin layer, self smoothing cementitious floor topping. Produces a smooth durable surface for internal areas subjected to foot and
forklift traffic. Applied at 6mm - 12mm thickness. It can be used either as a stand-alone system or, depending upon end use of floor,
in conjunction with Nitoflor floor coatings.
Typical applications: Warehouses, light to medium engineering operations, food processing plants and car parks.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC602055-18KG CEMTOP XD 20KG GREY 20KG GREY 50

9300611623256

FC602056-18KG CEMTOP XD 20KG WHITE 20KG WHITE 50

9300611623263

Fosroc Cemtop HD30 (Previously known as Aegis MSP)

Internal and external, trafficable, cementitious floor topping. Produces a durable surface with excellent wear and improved chemical
resistance. Available in; fine grade for squeegee applications and coarse grade for trowel applications and heavy duty remedial work
Typical applications: Particularly suited to repair rain-damaged concrete surfaces in warehouses and commercial carparks.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

CEMTOP HD30 COARSE GREY

FC652023-18.6KG 18.6KG GREY 50
POWDER 18.6KG
9300611621160

CEMTOP HD30 FINE GREY

FC652021-18.6KG 18.6KG GREY 50
POWDER 18.6KG
9300611621153

CEMTOP HD30 FINE GREY

FC652022-1.4L 1.4L – –
WET MIX 1.4L
9300611621177

72
 RESIN FLOORING SYSTEMS

Fosroc Nitoflor FC130

Water-based, low odour two part epoxy coating for concrete floors and walls. Produces an easily cleaned, dustproof surface with good
resistance to most oils and liquids.
Typical applications: Warehouse floors, garage floors, light industrial floors, food production floors, kitchens, areas with pedestrian
and light vehicle traffic.

QTY
PRODUCT UNIT PACK
DESCRIPTION COLOUR PER BARCODE
CODE SIZE SIZE
PALLET

NITOFLOR FC130 16L COLOUR CLEAR PACK

NITOFLOR FC130 CLEAR

FC612182-2.9L 2.9L 108
BASE

16L 9330221081054
CLEAR
PACK

NITOFLOR FC130 CLEAR

FC612181-13.1L 13.1L 32
HARDENER
9330221081061
NITOFLOR FC130 16L SILVER GREY PACK

FC612184-3L NITOFLOR FC130 BASE 3L 108

16L SILVER 9330221081047

PACK GREY

NITOFLOR FC130 SILVER

FC612183-13L 13L 32
GREY HARDENER
9330221081030
NITOFLOR FC130 16L MID GREY PACK

FC612184-3L NITOFLOR FC130 BASE 3L 108

16L MID 9330221081030

PACK GREY

INDUSTRIAL
FLOORING
NITOFLOR FC130 MID GREY
FC612196-13L 13L 32
HARDENER
9330221081023

Fosroc Nitoflor FC150 HP-FC (Replaces Durafloor FC)

Fast cure, version of Nitoflor FC150 HP for fast return to service times. Resists vehicular traffic after 12 hours, full cure resisting chemical
attack after 4 days. Tintable with Nitoflor colour pots.
Typical applications: Food and chemical industries, hospitals, schools, kitchens, high traffic applications.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

TINTABLE
4L
FC605100-4L NITOFLOR FC150 HP-FC 4L WITH NITOFLOR 72
PACK
COLOUR POTS
9300611582355

73
Fosroc Nitoflor FC150 HP (Replaces Durafloor HP)
Solvent free, high build epoxy floor coating. Highly resistant to chemical attack and the action of forklift/commercial type traffic. Nitoflor
Medium Grit can be added to achieve defined slip resistance ratings. Non-taint during and after application. Produces a satin finish.
Tintable with Nitoflor colour pots.
Typical applications: Food and chemical industries, hospitals, schools, kitchens, high traffic applications.

PRODUCT UNIT PACK QTY PER LEAD TIME

DESCRIPTION COLOUR MOQ BARCODE
CODE SIZE SIZE PALLET (DAYS)

NITOFLOR FC150 HP 8L PACK

NITOFLOR FC150
FC605117-5.5L 5.5L 60 – –
HP BASE TINTABLE

8L
WITH 9300611582430
NITOFLOR
PACK
COLOUR
NITOFLOR FC150 POTS
FC605118-2.3L 2.3L 108 – –
HP HARDENER
9300611582447
NITOFLOR FC150 HP 16L SPECIAL COLOUR PACK MTO

NITOFLOR FC150 HP
FC605115-11.4L SPECIAL COLOUR 11.4L 32 23 14-21
SUPPLIED
BASE MTO
16L
PRE-TINTED 9300611582416
TO
PACK
SPECIFIED
NITOFLOR FC150 HP
COLOUR
FC605116-4.6L SPECIAL COLOUR 4.6L 108 23 14-21
HARDENER MTO
9300611582423

Fosroc Nitoflor SL (Replaces Durafloor SL)

Solvent free, self smoothing, epoxy floor topping. Non-taint, produces an impervious, chemical resistant finish which is hygienic and easy to clean.
Apply at 2-4mm thickness. For slip resistance, overcoat with Nitoflor FC150HP with added Nitoflor Medium Grit. Tintable with Nitoflor colour pots.
Typical applications: Hospital clean rooms, laboratories, food processing plants, film studio floors, prisons, supermarkets and light
industrial plants.

PRODUCT UNIT PACK QTY PER

DESCRIPTION COLOUR BARCODE
CODE SIZE SIZE PALLET

NITOFLOOR SL 16L PACK

FC605125-6.4L NITOFLOR SL BASE 6.4L 32

9300611582485
TINTABLE
WITH
16L
FC605127-3.1L NITOFLOR SL HARDENER 3.1L NITOFLOR 108
PACK
COLOUR
POTS 9300611582508

NITOFLOR SL/SLX
FC605126-14KG 14KG 70
FILLERS
9300611582492

74
Fosroc Nitoflor SLX (Replaces Durafloor SLX)
Cold weather application version of Nitoflor SL, self smoothing epoxy. Specifically formulated to resist ‘epoxy bloom’. Tintable with
Nitoflor colour pots.
Typical applications: Hospital clean rooms, laboratories, food processing plants, film studio floors, prisons, supermarkets and light
industrial plants.

PRODUCT UNIT PACK QTY PER

DESCRIPTION COLOUR BARCODE
CODE SIZE SIZE PALLET

NITOFLOR SLX 16L PACK

FC605128-6.2L NITFLOR SLX BASE 6.2L 32

9300611582515
TINTABLE
WITH
16L
FC605129-3.8L NITFLOR SLX HARDENER 3.8L NITOFLOR 108
PACK
COLOUR
POTS 9300611582522

FC605126-14KG NITOFLOR SL/SLX FILLERS 14KG 70

9300611582492

Fosroc Nitoflor N (Replaces Durafloor N)

Two part solvent free novolac epoxy floor coating. Highly resistant to aggressive chemicals e.g. acids, produces a highly wear resistant
finish. Add Nitomortar F4 fillers for a 5mm trowel finish.
Typical applications: Mining processing areas, chemical plant floors, chemical plant bounding and industrial plant floors.

PRODUCT UNIT PACK QTY PER

DESCRIPTION COLOUR BARCODE
CODE SIZE SIZE PALLET

NITOFLOR N 25L PACK

FC605170-15L NITOFLOR N BASE 15L 32

25L 9300611583581
–
PACK

FC605175-10L NITOFLOR N HARDENER 10L 60

9300611583598

INDUSTRIAL
FLOORING
Fosroc Nitoflor PU600
PU cement flooring for applications that require high resistance to mechanical stress and chemical attack, extreme temperatures
and need to be applied within a limited timeframe.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

FC605200-2.33KG NITOFLOR PU600 PART A 2.33KG 4 96

9300611607119

FC605201-2.52KG NITOFLOR PU600 PART B 2.52KG 4 160

9300611607096

FC605202-12.7KG NITOFLOR PU600 FILLERS 12.7KG 64

9300611607089

75
Fosroc Nitoflor PU200
PU cement sealer coating for Nitoflor PU600 polyurethane cement floor topping, without aggregates or with a broadcast textured
surface. It can also be used as a stand alone coating for concrete.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

FC605190-1.19KG NITOFOR PU200 PART A 1.19KG 6 216

9300611607102

FC605191-1.41KG NITOFOR PU200 PART B 1.41KG 6 216

9300611607140

FC605192-1.76KG NITOFLOR PU200 FILLERS 1.76KG 6 234

9300611607065

Fosroc Nitoflor PU Colour Pot

Colour Component for Nitoflor PU600 and PU200.

PRODUCT QTY PER QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON PALLET

FOSROC NITOFLOR PU
FC605225-0.65KG 0.65KG 24 648
COLOUR G21 JADE
9300611603660

FOSROC NITOFLOR PU
FC605226-0.65KG 0.65KG 24 648
COLOUR R63 RED OXIDE
9300611603677

FOSROC NITOFLOR PU
FC605227-0.65KG 0.65KG 24 648
COLOUR N43 PIPELINE GREY
9300611603684

FOSROC NITOFLOR PU
FC605228-0.65KG 0.65KG 24 648
COLOUR CURTAIN CALL
9300611603691

FOSROC NITOFLOR PU
FC605229-0.65KG COLOUR B23 BRIGHT BLUE 0.65KG 24 648
MTO
9300611603707

FOSROC NITOFLOR PU
FC605230-0.65KG COLOUR Y54 OATMEAL 0.65KG 24 648
MTO
9300611603714

FOSROC NITOFLOR PU
FC605231-0.65KG COLOUR Y15 SUNFLOWER 0.65KG 24 648
MTO
9300611603721

76
 EPOXY MORTARS

Fosroc Nitomortar 903

Nitomortar 903 is a solvent free epoxy resin binder system.
Typical applications: For combining with Nitomortar F4 fillers to produce epoxy mortars/screeds of various consistencies. Also used
as a priming system with some Nitoflor epoxy flooring products.

PRODUCT QTY PER QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE CARTON PALLET (DAYS)

NITOMORTAR 903 6L PACK

NITOMORTAR 903
FC381019-4L 4 54 - -
BASE 4L
6L 9300611621023
PACK
NITOMORTAR 903
FC381018-2L 4 54 - -
HARDENER 2L
9300611621047
NITOMORTAR 903 30L PACK

NITOMORTAR 903
FC381019-20L – 32 – –
BASE 20L
30L 9330221080507
PACK
NITOMORTAR 903
FC381018-10L – 48 – –
HARDENER 10L
9330221080514

NITOMORTAR 903
FC381019-200L 200L – 4 1 14-21
BASE 200L MTO
9330221080491
NITOMORTAR 903
FC381018-200L HARDENER 200L 200L – 4 1 14-21
MTO
9330221080484

Fosroc Nitomortar F4 Fillers

INDUSTRIAL
FLOORING
Graded (up to 0.5mm) silica sand fillers used with Nitomortar 903 epoxy resin binder to produce mortars and screeds for various
application such as flooring preparation.
Typical applications: For combining with Nitomortar 903 to produce epoxy mortars/screeds.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC312060-20KG NITOMORTAR F4 FILLERS 20KG SAND 50

9330221005111

77
 SLIP RESISTANCE SOLUTIONS

Fosroc Nitoflor Medium Grit (Replaces Duraflor Medium Grit)

Medium grade silica slip resistant grains. Wet broadcast into Nitoflor N, FC150 HP and FC150 HP-FC.
Typical applications: Improve slip resistance in epoxy floor coatings.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC605185-20KG NITOFLOR GRIT MEDIUM 20KG 20KG SAND 50

9300611583611

Fosroc Nitoflor Anti-Slip Grains (Replaces Duraflor Anti-slip Grains)

Silicon carbide grains used in the finishing of concrete floors to make the surface slip and wear resistant. Provides pleasant black
speckling and glittering sparkle on the finished surface as the concrete wears.
Typical applications: Suitable for use in schools, hospitals, public buildings, factories, on fire escapes, stairways, entrances, loading ramps.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC605180-20KG NITOFLOR ANTI-SLIP GRAINS 20KG 20KG SILVER/BLACK 50

9300611583604

78
 COLOUR POTS

Fosroc Nitoflor Colour Pot

Nitoflor Colour Pots come in a variety of Australian Standard AS2700-2011 colour, with specialty colours available on request.
Typical applications: Nitoflor Colour Pots are concentrated colour pigments for use with Nitoflor FC150 HP, FC150 HP-FC, SL and
SLX epoxy resin flooring products.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE COLOUR MOQ BARCODE
CODE CARTON (DAYS)

NITOFLOR
FC605135-0.5KG 0.5KG BLACK 24 – –
COLOUR POT
9300611582539

NITOFLOR
FC605136-0.5KG 0.5KG CREAM 24 – –
COLOUR POT
9300611582546

NITOFLOR FERN
FC605137-0.5KG 0.5KG 24 – –
COLOUR POT GREEN
9300611582553

NITOFLOR HARBOUR
FC605138-0.5KG 0.5KG 24 – –
COLOUR POT BLUE
9300611582560

NITOFLOR KOALA
FC605139-0.5KG 0.5KG 24 – –
COLOUR POT GREY
9300611582577

NITOFLOR LIGHT
FC605140-0.5KG 0.5KG 24 – –
COLOUR POT GREY BLUE
9300611582584

NITOFLOR
FC605141-0.5KG 0.5KG OFF-WHITE 24 – –
COLOUR POT
9300611582591

NITOFLOR PASTEL

INDUSTRIAL
FC605142-0.5KG 0.5KG 24 – –

FLOORING
COLOUR POT GREY
9300611582607

NITOFLOR
FC605143-0.5KG 0.5KG RASPBERRY 24 – –
COLOUR POT
9300611582614

NITOFLOR SAFETY
FC605144-0.5KG 0.5KG 24 – –
COLOUR POT YELLOW
9300611582621

NITOFLOR
FC605145-0.5KG 0.5KG SAND 24 – –
COLOUR POT
9300611582638

NITOFLOR SILVER
FC605146-0.5KG 0.5KG 24 – –
COLOUR POT GREY
9300611582645

NITOFLOR CURTAIN
FC605147-0.5KG 0.5KG 24 – –
COLOUR POT CALL
9300611582652

NITOFLOR SPECIAL
FC605148-0.5KG 0.5KG 24 40 14-21
COLOUR POT MTO
9300611582669

79
80
PROTECTIVE
COATINGS
DEKGUARD® ∙ NITOCOTE ∙ NITOPRIME

Please always refer to the product TDS before making Protective Coatings
your final selection or speak to your Fosroc representative.

81
 CONCRETE ANTI-CARBONATION & CHLORIDE ION, PROTECTIVE COATINGS

Fosroc Nitoprime DG
Nitoprimer DG is a silane-siloxane acrylic primer coat used in conjunction with Dekguard E2000 and Dekguard Elastic.
PRODUCT QTY PER
DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC862600-20L NITOPRIME DG 20L 20L CLEAR 32

9330221004794

Fosroc Dekguard Primer

Dekguard Primer is a silane-siloxane primer coat used in conjunction with Dekguard Clear and Dekguard S.
PRODUCT QTY PER
DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC861520-20L DEKGUARD PRIMER 20L 20L CLEAR 32

9330221004824

Fosroc Dekguard E2000

Dekguard E2000 is a crack-accommodating, water based pigmented protective coating which provides excellent elongation and
recovery, resistance to chloride ion ingress, carbonation, UV light and rain.
PRODUCT QTY PER LEAD TIME
DESCRIPTION SIZE COLOUR MOQ BARCODE
CODE PALLET (DAYS)

FOS DEKGUARD E2000

FC860625-15L 15L WHITE 32 1 14-21
WHT 15L MTO
9330221004893

FOS DEKGUARD E2000 FACTORY

FC860626-15L SPECIAL COLOUR 15L 15L TINTED 32 11 14-21
MTO TO ORDER
9330221004886

FACTORY
FOS DEKGUARD E2000
FC860628-15L 15L TINTED 32 1 14-21
IN CAN TINT 15L MTO
TO ORDER
9330221004879

82
Fosroc Dekguard Elastic
Crack accommodating elastomeric, pigmented acrylic, chloride ion and carbonation protective coating for concrete and masonry.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE COLOUR MOQ BARCODE
CODE PALLET (DAYS)

FOSROC DEKGUARD
FC860600-15L 15L WHITE 32 1 14-21
ELASTIC WHITE MTO
9330221004930

FOSROC DEKGUARD FACTORY

FC860633-15L ELASTIC 15L TINTED 32 1 21-28
IN CAN TINT 15L MTO TO ORDER
9330221004862

FOSROC DEKGUARD FACTORY

FC860621-15L ELASTIC SPECIAL 15L TINTED 32 11 21-28
COLOUR MTO TO ORDER
9330221004916

Fosroc Dekguard Clear

Dekguard Clear is a solvent based clear methacrylate coating, which will provide resistance to air-borne corrosion elements,
weathering and rain.
PRODUCT QTY PER
DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC861530-20L DEKGUARD CLEAR 20L 20L CLEAR 32

9330221004817

Fosroc Dekguard S
High performance, pigmented aliphatic acrylic, chloride ion and carbonation protective and decorative coating for concrete and masonry

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FOS DEKGUARD S BRIDGE

FC860624-15L 15L 32
BRIDGE GREY GREY
9300611605122

FOS DEKGUARD S CONCRETE

FC860623-15L 15L 32
CONCRETE GREY GREY
9300611605115 PROTECTIVE
COATINGS

CONCRETE & MASONRY, ANTI-CHLORIDE ION, IMPREGNATING TREATMENTS

Fosroc Nitocote SN502

Nitocote SN502 is a single-component, penetrating silane-siloxane system which significantly reduces the absorption of water and
water borne salts, whilst allowing the passage of water vapour out from the substrate.
PRODUCT QTY PER
DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC855145-20L NITOCOTE SN502 20L 20L CLEAR 32

9330221004992

83
Fosroc Nitocote SN508 Creme (Replaces Emer-Stop Creme)
Nitocote SN508 Creme is a thixotropic, water dispersed emulsion of iso-octyltriethoxysilane for use as a penetrating water repellent
treatment for concrete.
PRODUCT QTY PER
DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

NITOCOTE SN508
FC855150-30L 30L CLEAR 18
CREME 30L
9300611598844

NITOCOTE SN508
FC855150-200L 200L CLEAR 4
CREME 200L
9300611598851

Fosroc Nitocote SN511 (Replaces Emer-Stop S100N)

Nitocote SN511 is a low viscosity, isobutyltriethoxy silane. It penetrates deeply into porous substrates, reacting to reduce absorption of
water and water-borne salts, but still permits passage of water vapour out of the structure.
PRODUCT QTY PER
DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

FC855155-20L NITOCOTE SN511 20L 20L CLEAR 32

9300611598837

FC855155-200L NITOCOTE SN511 200L 200L CLEAR 4

9300611598820

CHEMICAL RESISTANT PROTECTIVE COATINGS

Fosroc Nitocote EP405

Nitocote EP405 is a two pack, solvent free, epoxy resin coating for potable water retaining structures. Provides a smooth, hygienic and
tough finish which is suitable for contact with potable water and foodstuffs. Available in blue and white.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

NITOCOTE EP405 8L PACK WHITE

NITOCOTE EP405 WHITE

FC800010-6.5L WHITE 60
BASE 6.5L

8L 9330221005067
PACK

NITOCOTE EP405
FC800015-1.5L CLEAR 135
HARDENER 1.5L
9330221005050
NITOCOTE EP405 8L PACK BLUE

NITOCOTE EP405 BLUE

FC800020-6.5L BLUE 60
BASE 6.5L

8L 9330221005043
PACK

NITOCOTE EP405
FC800015-1.5L CLEAR 60
HARDENER 1.5L
9330221005050

84
Fosroc Nitocote EP410
Nitocote EP410 is a highly chemical resistant, high build, solvent free, two pack epoxy coating for concrete and steel.

PRODUCT QTY PER

DESCRIPTION SIZE COLOUR BARCODE
CODE PALLET

NITOCOTE EP410 8L PACK WHITE

NITOCOTE EP410 WHITE

FC853050-6.1L WHITE 32
BASE 6.1L

8L
9330221005012
PACK

NITOCOTE EP410
FC800005-1.9L CLEAR 60
HARDENER 1.9L
9330221005074
NITOCOTE EP410 8L PACK GREY

NITOCOTE EP410 GREY

FC800000-6.1L GREY 60
BASE 6.1L

8L
9330221005081
PACK

NITOCOTE EP410
FC800005-1.9L CLEAR 135
HARDENER 1.9L
9330221005074

Fosroc Nitocote EP500

Nitocote EP500 is a solvent free, two component system. Typically spray-applied then trowel finished to produce a high build, chemical
and abrasion resistant epoxy liner system (2mm to 5mm thickness).

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

NITOCOTE EP500 16L PACK

NITOCOTE EP500
FC836688-9.5L 48
BASE 9.5L

16L
9330221005364
PACK

NITOCOTE EP500
FC836699-6.5L 48
HARDENER 6.5L
9330221005357
PROTECTIVE
COATINGS

85
86
SURFACE
TREATMENTS
CONCURE® ∙ PRECO

Please always refer to the product TDS before making Surface Treatments
your final selection or speak to your Fosroc representative.

87
 CONCRETE CURING COMPOUNDS

Fosroc Concure AV
Concure AV is an aliphatic alcohol evaporative retarder used during the placement of fresh concrete. Used to greatly reduce cracking
caused by unfavourable weather conditions. Supplied as a concentrate which is diluted on site with water.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC644444-20L CONCURE AV 20L 20L 32

9330221080576

FC644444-200L CONCURE AV 200L 200L 4

9330221080569

Fosroc Concure A99

Concure A99 is water based acrylic curing compound which conforms to AS3799. It is suitable for curing concrete and cement renders
where after trades such as painting with acrylic paints is likely.

PRODUCT QTY PER LEAD

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET TIME

FC600909-20L CONCURE A99 20L 20L 32 – –

9330221079785

FC600909-205L CONCURE A99 205L 205L 4 – –

9330221079761

CONCURE A99 1000L

FC600909-1000L 1000L 1 1 21-28
MTO
9330221079778

Fosroc Concure CR
Concure CR is a solvent based chlorinated rubber based curing compound ideal for for industrial concrete floors.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC662025-200L CONCURE CR 200L 200L 4

9330221082174

88
Fosroc Concure HR90
Concure HR90 is a hydrocarbon based curing compound for large areas of concrete construction such as runways, motorways or
bridgeworks. Conforms to AS3799.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

CONCURE HR90
FC662043-200L 200L 4 8 7-14
200L MTO
9330221082150

Fosroc Concure WB30

Concure WB30 is a water based wax emulsion used to retain moisture in concrete for effective curing. Useful for large areas of
concrete construction such as runways, motorways or bridgeworks. Conforms to AS3799.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

CONCURE WB30
FC663050-20L 20L 32 – –
CLEAR 20L
9330221082143

CONCURE WB30
FC663050-200L 200L 4 – –
CLEAR 200L
9330221082129

CONCURE WB30
FC663050-1000L 100L 1 1 7-14
CLEAR 1000L MTO
9330221082136

CONCURE WB30
FC664070-200L 200L 4 – –
WHITE 200L
9330221082112

Fosroc Concure B90

Concure B90 is a concrete curing compound formulated on a blend of bitumen resins and hydrocarbons which not only cures concrete
but it also acts as a primer coat for asphalt and bitumen overlays. It is ideally suitable for bridge decks and road construction. Conforms
to AS3799.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

CONCURE B90 20L

FC600805-20L 20L 32 32 21-28
MTO
9300611580177

CONCURE B90 200L

FC600805-200L 200L 4 4 14-21
MTO
9330221079921

CONCURE B90 1000L

FC600805-1000L 1000L 1 1 14-21
MTO
9330221079884
TREATMENTS
SURFACE

89
Fosroc Concure X90
Concure X90 is a water based hydrocarbon curing compound suitable for curing freshly laid concrete outdoors. Concure X90 will break
down if subjected to UV exposure and will totally oxidise and leave the surface within 55 days of the application. It conforms to AS3799.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE PALLET

FC600804-20L CONCURE X90 20L 20L 32

9330221153010

FC600804-205L CONCURE X90 205L 205L 4

9330221079914

FC600804-1000L CONCURE X90 1000L 1000L 1

9330221079907

RELEASE AGENTS AND RETARDERS

Fosroc Form Release Agent

Fosroc Form Release Agent is an economical, general purpose formwork and mould release agent used in pre-cast and in-situ
concrete construction.

PRODUCT QTY PER LEAD TIME

DESCRIPTION SIZE MOQ BARCODE
CODE PALLET (DAYS)

FORM RELEASE
FD777002-20L 20L 32 – –
AGENT 20L
9330221082068

FORM RELEASE
FD777002-200L 200L 4 – –
AGENT 200L
9330221082051

FORM RELEASE
FD777002-1000L 1000L 1 1 14-21
AGENT 1000L MTO
9330221082044

Fosroc Preco Bondbreaker

Preco Bondbreaker is designed for use in prefabricated or tilt-up panel construction. It can significantly reduce surface defects including
blowholes in concrete finish and ensures easy demoulding.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FD777025-20L PRECO BONDBREAKER 20L 20L 32

9330221082037

90
Fosroc Preco Form Creme
Preco Form Creme is for use in application to steel hinges or vertical forms. Used for precast concrete where a non-drip and long
lasting release agent is required.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FD777035-20L PRECO FORM CREME 20L 20L 32

9330221082013

Fosroc Preco RWB

Preco RWB is used to reveal aggregate in freshly placed horizontal concrete to produce an exposed aggregate finish, or a key for
subsequent pours or renders.

PRODUCT QTY PER LEAD

DESCRIPTION SIZE MOQ BARCODE
CODE CARTON TIME

FD755555-20L PRECO RWB 20L 20L 24 – –

9330221155274

PRECO RWB 200L

FD756085-200L 200L 4 2 14-21
MTO
9330221082204

OTHER

Fosroc Solvent 10
Solvent 10 is a general purpose aromatic solvent for cleaning equipment and thinning solvent based sealers.

PRODUCT QTY PER

DESCRIPTION SIZE BARCODE
CODE CARTON

FC600800-4L SOLVENT 10 4L 4L 108

9330221081894

FC600800-20L SOLVENT 10 20L 20L 24

9330221081887
TREATMENTS
SURFACE

91
FOSROC
DELIVER
SOLUTIONS,
NOT JUST PRODUCTS.

92
PRODUCT PORTFOLIO ALIGNMENT
(PREVIOUS PRODUCT NAMES)
As part of building the Fosroc range in Australia and New Zealand, and aligning the portfolio with the Global Fosroc
product range there are a number of changes to the Parchem product names listed below.

ISO 9001 Quality Assurance

All renamed products, now supplied under the Fosroc brand, will be manufactured to the same specifications and
standards as the previous Parchem products.

PREVIOUS NAME NEW NAME PAGE

Aegis MSP Cemtop HD30 72

Duraflex Nitoseal MS250 50
Duraflex FC Nitoseal MS400 50
Durafloor Anti Slip Grains Nitoflor Anti Slip Grains 75
Durafloor FC Nitoflor FC150 HP FC 72
Durafloor HD Nitoflor HD 68
Durafloor HD-S Nitoflor HD-S 68
Durafloor HP Nitoflor FC150 HP 72
Durafloor Level Prime Nitoprime 330 69
Durafloor N Nitoflor N 74
Durafloor SL Nitoflor SL 73
Durafloor SLX Nitoflor SLX 73
Emer-Band Expoband 110 54
Emer-Proof 750 Nitoproof 750 40
Emer-Proof Aqua Barrier Advanced Nitoproof 810 40
Emer-Proof Aqua Barrier Landscape Nitoproof 210 39
Emer-Proof Aqua Barrier Quick Dry Nitoproof 410 40
Emer-Proof Aqua Barrier Undertile Nitoproof 310 39
Emer-Proof Aqua Barrier Vapour Control Nitoproof 510 40
Emer-Proof Drain V Proofex Sheetdrain 81 35
Emer-Proof EJB Nitoband 45
Emer-Proof HD Proofex 6100 35
Emer-Proof HDPE Proofex 3100 35
Emer-Proof Tilebond Flex Nitotile Flex 45
Emer-Seal construction Silicone HM FC Nitoseal SC140 –
Emer-Seal CR Nitoseal SC600 52
Emer-Seal PU25 Nitoseal PU250 50
Emer-Seal PU40 Nitoseal PU400 51
Emer-Seal Roadseal Nitoseal SC800 53
Emer-Seal Roadseal SL Nitoseal SC820 52
Emer-Stop Creme Nitocote SN508 Creme 80
Emer-Stop S100N Nitocote SN511 80
Jointflex Expandafoam 58
Renderoc HB50 Renderoc HB40 Plus 13
Stiffjoint Hydrocell 63

93
PRODUCT PORTFOLIO
IN TRANSITION TO FOSROC
OLD LINE OLD PRODUCT OLD NEW LINE NEW PRODUCT NEW TRANSITION
AND SHADE DESCRIPTION BARCODE AND SHADE DESCRIPTION BARCODE DATE

DURAFLEX BLACK
FC930221-600ML 9330221155786 OBSOLETE
600ML

DURAFLEX FC FOSROC NITOSEAL

FC930200-200L CONCRETE GREY 9300611548535 FC920181-200L MS400 CONCRETE 9300611592842 JUN-19
200L GREY 200L MTO

DURAFLEX FC FOSROC NITOSEAL

FC930200-600ML CONCRETE GREY 9330221155236 FC920181-600ML MS400 CONCRETE 9300611592859 JUN-19
600ML GREY 600ML (12/CTN)

FOSROC PROOFEX
EMER PRF HD
FC042038-UNIT 9330221148764 FC007068-UNIT 6100 1.65MM X 1M X 9300611612380 JUL-19
1MX20M ROLL
20M ROLL

FOSROC PROOFEX
EMER PRF HDPE
FC000537-UNIT 9300611545022 FC007067-UNIT 3100 1.5MMX1MX20M 9300611612373 JUL-19
1.5MM 1X20M
ROLL

EMER PRF SELF FOSROC

FC042041-20L 9330221148740 FC020500-20L 9300611612557 JUL-19
ADH PRIMER 20L PRIMER 24 20L

EMER PRF SELF FOSROC

FC042041-4L 9330221148733 FC020500-4L 9300611612540 JUL-19
ADH PRIMER 4L PRIMER 24 4L

EMER STOP FOSROC NITOCOTE

FC655170-200L 9330221004954 FC855150-200L 9300611598851 JUL-19
CREME 200L SN508 CREME 200L

EMER STOP FOSROC NITOCOTE

FC655170-30L 9330221004947 FC855150-30L 9300611598844 JUL-19
CREME 30L SN508 CREME 30L

EMER STOP S100N FOSROC NITOCOTE

FC655147-200L 9330221004978 FC855155-200L 9300611598820 JUL-19
200L (177KG) SN511 200L

EMER STOP FOSROC NITOCOTE

FC655147-20L 9330221004961 FC855155-20L 9300611598837 JUL-19
S100N 20L SN511 20L

EMER-SEAL CONST FOSROC NITOSEAL

FC910380-600ML SIL HM FC CON. GREY 9330221155069 FC920150-600ML SC140 CONCRETE 9300611592712 SEP-19
600ML GREY 600ML (12/CTN)

EMER-SEAL CONST
FC910390-600ML SIL HM FC SPEC.COL 9330221155045 OBSOLETE
600ML MTO

94
OLD LINE OLD PRODUCT OLD NEW LINE NEW PRODUCT NEW TRANSITION
AND SHADE DESCRIPTION BARCODE AND SHADE DESCRIPTION BARCODE DATE

EMER-SEAL CONST
FC930104-600ML SILICONE BLACK 9330221124430 OBSOLETE
600ML

EMER-SEAL CONST
FC930100-600ML SILICONE CON.GREY 9330221124454 OBSOLETE
600ML

EMER-SEAL CONST
FC930102-600ML SILICONE SPECIAL 9330221124447 OBSOLETE
600ML MTO

EMER-SEAL PU 25 FOSROC NITOSEAL

FC920525-600ML CONC.GREY 600ML 9330221124652 FC920112-600ML PU250 CONCRETE 9300611589927 MAY-19
(20/CTN) GREY 600ML (12/CTN)

EMER-SEAL PU 25
FC920560-600ML DRIFTWOOD 600ML 9330221124584 OBSOLETE
(20/CTN)

EMER-SEAL PU 25
FC920530-600ML WHITE 600ML 9330221124645 OBSOLETE
(20/CTN)

EMER-SEAL PU 40
FC920601-600ML BLACK 600ML 9330221124546 OBSOLETE
(20/CTN)

FOS DURAFLX FC FOSROC NITOSEAL

FC930202-600ML SPECL COLOUR 9300611598288 FC930202-600ML MS400 SPECIAL 9300611598288 JUN-19
600ML MTO COLOUR 600ML MTO

FOSROC PROOFEX
CONWRAP HD
FC700127-UNIT 9300611588722 FC700370-UNIT S100 100MM X 20M 9300611612397 JUL-19
100MMX20M
ROLL (5/CTN)

CONWRAP HD FOSROC PROOFEX

FC700128-UNIT 150MM X 20M 9300611588739 FC700371-UNIT S150 150MM X 20M 9300611612403 JUL-19
ROLL ROLL (3/CTN)

PAR CONWRAP HD FOSROC PROOFEX

FC700129-UNIT 200MM X 20M 9300611588760 FC700372-UNIT S200 200MM X 20M 9300611612519 JUL-19
ROLL ROLL (5/CTN)

FOSROC PROOFEX
PAR CONWRAP HD
FC700130-UNIT 9300611588746 FC700373-UNIT S250 250MM X 20M 9300611612526 JUL-19
250MM X 20M
ROLL (2/CTN)

FOSROC PROOFEX
PAR CONWRAP HD
FC700131-UNIT 9300611588753 FC700374-UNIT S300 300MM X 20M 9300611612533 JUL-19
300MM X 20M
ROLL (1/CTN)

95
PRODUCT INDEX

PRODUCT PAGE PRODUCT PAGE

Aegis MSP 72 Conseal CS231 59

Bond Breaker Tape 67 Construction Grout 28

Cellflex 66 Construction Joint Tape 47

Cemelast 46 Dekguard Clear 83

Cemtop GP Advanced 71 Dekguard E2000 82

Cemtop XD 72 Dekguard Elastic 83

Conbextra BB92 31 Dekguard Primer 82

Conbextra C 28 Dekguard S 83

Conbextra CB 30 Earth Shield 49

Conbextra Deep Pour 29 Ebonex 25

Conbextra EP10 31 Elasticizer PK75 46

Conbextra EP120 32 Expandafoam 61

Conbextra EP300 DP 33 Expandafoam Closed Cell 62

Conbextra EP65 Plus 32 Expandafoam Open Cell 63

Conbextra EP935 33 Expoband 110 56

Conbextra GP 28 Flamex One 53

Conbextra Grout Aggregate 30 Flamex PU 53

Conbextra HES 29 Flamex XT 54

Conbextra HF 29 Form Release Agent 90

Conbextra HS 29 Galvanode DAS 24

Conbextra TA 31 Galvashield CC 23

Conbextra UW 30 Galvashield Fusion T2 22

Concrete Grey 46 Galvashield XP 22

Concure A99 88 Guncrete E 15

Concure AV 88 Hydrocell 65

Concure B90 89 Hydrocor – Type 3 / Type 106 64

Concure CR 88 Hydrotite 50

Concure HR90 89 Leakmaster 50

Concure P 90 Nitoband 48

Concure WB30 89 Nitobond AR 19

Concure X90 90 Nitobond EP 18

96
PRODUCT PAGE PRODUCT PAGE

Nitobond HAR 19 Nitomortar AP 16

Nitobond SBR 19 Nitomortar EL-HB 18

Nitocote EP405 84 Nitomortar F4 Fillers 17

Nitocote EP410 85 Nitomortar F4 Fillers 78

Nitocote EP500 85 Nitomortar UA 17

Nitocote SN502 83 Nitoprime 115 41

Nitocote SN508 Creme 84 Nitoprime 120 41

Nitocote SN511 84 Nitoprime 320 PU 45

Nitofill Accelerator 20 Nitoprime 330 71

Nitofill LV 21 Nitoprime DG 82

Nitofill PU130 20 Nitoprime Zincrich 20

Nitofill PU150 20 Nitoproof 210 41

Nitoflor Anti-Slip Grains 78 Nitoproof 310 42

Nitoflor Colour Pots 79 Nitoproof 410 42

Nitoflor FC100 70 Nitoproof 510 42

Nitoflor FC130 73 Nitoproof 750 43

Nitoflor FC150 HP 74 Nitoproof 810 43

Nitoflor FC150 HP-FC 73 Nitoproof Top Coat EW 43

Nitoflor HD 70 Nitoproof Top Coat UV 43

Nitoflor HD-S 70 Nitoseal MB175 53

Nitoflor Medium Grit 78 Nitoseal MS250 52

Nitoflor N 75 Nitoseal MS400 52

Nitoflor PU Colour Pot 76 Nitoseal PU250 52

Nitoflor PU200 76 Nitoseal PU400 53

Nitoflor PU600 75 Nitoseal SC600 54

Nitoflor Sicaltop 71 Nitoseal SC800 54

Nitoflor SL 74 Nitoseal SC820 55

Nitoflor SLX 75 Nitotile Flex 47

Nitomortar 903 16 Patchroc C 15

Nitomortar 903 77 Patchroc GP 15

Nitomortar 908 17 Paveroc 15

97
PRODUCT PAGE PRODUCT PAGE

Plug 46 Proofex Torchseal Pressure SL Flash 40

Polyurea SCS 45 Renderoc BB 30

Polyurea WHE110 44 Renderoc CAC 14

Polyurea WPE110 44 Renderoc FC 12

Preco Bondbreaker 91 Renderoc G 14

Preco Form Creme 91 Renderoc HB 12

Preco RWB 91 Renderoc HB25 12

Primer 10 58 Renderoc HB40 12

Primer 13 58 Renderoc HB40 Plus 13

Primer 21 58 Renderoc HB70 13

Primer 24 37 Renderoc HB70 Plus 13

Primer 24 40 Renderoc LA55 14

Primer 4 57 Renderoc LA55 Plus 14

Primer 7 57 Renderoc Rapid 13

Primer 7E 57 Renderoc ST 06 15

Proofex 3100 37 Supercast PVC Waterstops 49

Proofex 6100 37 Superswell 47B 50

Proofex Engage 36 Thioflex 555 55

Proofex Protection Board PP 38 Thioflex 600 Gun Grade 56

Proofex S 59 Thioflex 600 Pouring Grade 55

Proofex Sheetdrain 81 37 Uni-Mortar 1-Z 47

Proofex Torchseal A300 38 Vandex BB75-Z 45

Proofex Torchseal A350 38

Proofex Torchseal A400 38

Proofex Torchseal A500 39

Proofex Torchseal A600 39

Proofex Torchseal A625 39

Proofex Torchseal A700 39

Proofex Torchseal A800 39

Proofex Torchseal A825 40

Proofex Torchseal A900 40

98
99
World leaders in construction solutions
Fosroc is a world leader in the delivery of virtually any type of
construction project, combining high quality products, expert
technical support, customer service and innovation.

AU 1800 812 864 fosroc.com.au

NZ 0800 657 156 fosroc.co.nz
Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW AUS 2259
Concrete Plus Ltd 150 Hutt Park Road, Gracefield NZ 5010

* The information provided in this catalogue is correct at the time of publication. While Fosroc makes every effort to maintain the accuracy and quality of the information
provided in this catalogue, Fosroc cannot guarantee and assumes no legal liability or responsibility for the accuracy or completeness of the information provided in this
catalogue. Product images may only be a representation of the product. Project images are representations of the types of projects these products can be used for. It is
the responsibility of those using this information to check that it is current prior to specifying or using any of these products/coatings systems. Always refer to the product
Technical Data Sheet (TDS) before making your final selection or speak to your Fosroc representative.

Fosroc, Cemtop, Conbextra, Concure, Dekguard, Nitoflor, Nitoseal, Proofex, Renderoc, Supercast, Thioflex and the Fosroc logo, are the trade marks of Fosroc
International Limited, used under licence. Corkjoint is a trade mark of Parchem Construction Supplies Pty Ltd. Galvashield and Vandex are registered trade marks,
used under licence. Galvanode and Vector are trade marks, used under licence

05/20