Scribd
Upload
10K views2 pages

Torques Mitsubishi Evo X 4B11

This document provides tightening torque specifications for various components of a Mitsubishi Lancer Evolution X engine and chassis. It lists torque values and instructions for tightening the cylinder head bolts in multiple stages, as well as for other engine components like the sump drain bolt, flywheel, and spark plugs. It also specifies torques for tightening chassis components including the front and rear hubs, steering rack, brake calipers, and road wheels. Accompanying notes provide additional instructions for some components regarding use of new bolts/nuts and lubrication.

Uploaded by

ChristianHuiscañancoPerez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10K views2 pages

Torques Mitsubishi Evo X 4B11

This document provides tightening torque specifications for various components of a Mitsubishi Lancer Evolution X engine and chassis. It lists torque values and instructions for tightening the cylinder head bolts in multiple stages, as well as for other engine components like the sump drain bolt, flywheel, and spark plugs. It also specifies torques for tightening chassis components including the front and rear hubs, steering rack, brake calipers, and road wheels. Accompanying notes provide additional instructions for some components regarding use of new bolts/nuts and lubrication.

Uploaded by

ChristianHuiscañancoPerez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

 

Telephone:
Fax:
VAT Registration No.:

Notes Specified value Measured value


Tightening torques
Cylinder head instructions
Cylinder head
Renew bolts Yes
Stage 1 Tighten 15 Nm
Stage 2 Tighten 35 Nm
Stage 3 Tighten 90°
Stage 4 Tighten 90°
Other engine tightening torques
Sump drain bolt 39±5 Nm
Flywheel/driveplate 1)40 Nm 2)130 Nm
00000225 Crankshaft pulley/damper centre bolt
00000226 Camshaft sprocket/gear 85±5 Nm
Spark plugs 18±2 Nm
Engine oil pressure switch 10±2 Nm
Oil filter 14±2 Nm
Chassis tightening torques
00000271 Front hub
00000231 Front hub - wheel bearing housing bolts 80±10 Nm
00000113 Rear hub 160±16 Nm
00000113 Rear hub - wheel bearing housing bolts 95±14 Nm
00000113 Steering wheel 44±11 Nm
Steering rack/box mounting 70±10 Nm
00000113 Steering track rod end 40±8 Nm
Brake caliper to carrier Front 74±10 Nm
Brake caliper/carrier to hub Front 135±15 Nm
Brake caliper to carrier Rear 38±4 Nm
00000237 Brake caliper/carrier to hub Rear 58±7 Nm
00000198 Road wheels 98±10 Nm

Autodata Note 113

Use new nuts/bolts.

Autodata Note 198

Road wheels

Do NOT lubricate studs, nuts or mating surfaces.

Autodata Note 225

Crankshaft pulley/damper centre bolt

Lubricate bolt threads (use engine oil).


Tighten bolt in the following stages:
Manufacturer: Mitsubishi Model: Lancer (07-) 2,0 Evolution X FQ-300 (c) Autodata Limited 2013
Engine code: 4B11 Output: 217 (295) 6500 . 4/6/2021
Tuned for: R-Cat Year: 2008-12 V9.200-
1) 250 Nm
2) Slacken off
3) 110 Nm
4) 60°

Autodata Note 226

Camshaft sprocket/gear

Use new bolt. Lubricate bolt threads.

Autodata Note 231

Front hub - wheel bearing housing bolts

18" wheels = 135±15 Nm

Autodata Note 237

Brake caliper carrier to hub

17" wheels = 80±10 Nm

Autodata Note 271

Front hub

Use new nuts.


Castellated nut = 160±16 Nm
Flange nut with locking tab = 270±27 Nm

Tightening sequence

Manufacturer: Mitsubishi Model: Lancer (07-) 2,0 Evolution X FQ-300 (c) Autodata Limited 2013
Engine code: 4B11 Output: 217 (295) 6500 . 4/6/2021
Tuned for: R-Cat Year: 2008-12 V9.200-

You might also like