Scribd
Upload
98 views4 pages

Process - Walid Kamal C.V 2016 - Process Trainer

Walid Kamal is a safety engineer with over 10 years of experience in process industries. He has worked on projects involving dust explosion protection, safety showers, lock out/tag out systems, and developing safety philosophies. Currently he works as a Process Trainer at KFMB’S vegetable oil refinery in Kuwait, where his responsibilities include training, audits, mechanical integrity work, and ensuring compliance with regulations. He has extensive experience developing standard operating procedures, performing hazard and risk assessments, and facilitating corrective action planning.

Uploaded by

Hatem Hussein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
98 views4 pages

Process - Walid Kamal C.V 2016 - Process Trainer

Walid Kamal is a safety engineer with over 10 years of experience in process industries. He has worked on projects involving dust explosion protection, safety showers, lock out/tag out systems, and developing safety philosophies. Currently he works as a Process Trainer at KFMB’S vegetable oil refinery in Kuwait, where his responsibilities include training, audits, mechanical integrity work, and ensuring compliance with regulations. He has extensive experience developing standard operating procedures, performing hazard and risk assessments, and facilitating corrective action planning.

Uploaded by

Hatem Hussein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 4

Walid Kamal

 Adress 01 : Building No.94 - ST 30 –Khitan –Farwniya ( Kuwait )

Egypt :+201065202427- kuwait +965-65968303 walid2081981 [email protected]

Process Trainer

Detail – Oriented Efficients - Safety Engineer With 10 + Years With Rich Hands-On
Industrial Experiance Process Engineering, Loss Prevention And Process Safety
Management. Key Strengthes And Expertise

Professional Experience  Training & Development.


 Safety And Health Plan Audits
1. KFMB’S ( Veg.Oil Refinery / Oleochemical Projects) - Kuwait.  Mechanical Ingrity .
 KFD – K.O.C - KNPC Complaince.
Process Engineer / Trainer – June 2014 – Current .
 SIL ( Safety Integrity Levels)
 Dust Explosion Protection System Project Engineer ( Fike –UK).  Isolation Lockout Tag Out .
 Conversant With OSHA, API, NFPA, ANSI And ATEX.  Explosion Protection .
 Carried out Fixed Fire Fighting Systems Audits.  Process Commissioning .
 Develop SIL ( Safety Ingrity Levels) Boilers Station .  Oil Production.
 Engineer Out, install and commission Safety Showers Network .  Gas Dehydration .
 Project Engineer LOTO ( Lockout & Tag Out System ).  Oil Refinery Process.
 PHA/LOPA / PSSR/ MOC/ QRA Facilitator.
 P&ID Development .
 Desigened Safe Work @ Hight Tools For Confined Space Entry.
 Gas detection system.
 Systematized The Air Quality Systm Process Safety.
 Firefighting and security systems.
 Condition Monitoring Program As Anew Application In KFMB,S.
 Carry Out Process Vendoer Document Review .
 Interact With The State Of Kuwait Fire Dept (KFD) / Kuwait National Petroleum Co. (KNPC) For
Process Plants Design Drawings Licences.
 Engineered The Vacuum Distillation Tower area To Support The Safe Emergency Evacuation.
 Integrated New ORACLE Soft Ware To Track The NCR & Process Safety Shift Report.
 Development Of Safety Philosophies Including Fire And Explosion Protection, Ignition Control, And
Fire, Gas & Leak Detection Philosophy For The Feed Phase Of A KFMB’S Brownfield Project.
 Developing The Ispection Procedure Of Storage Tanks,Process unitsAnd Pressure Reliving Device.
 Prime Contact With Golf Insurance To Submit Such Fire Impermanit Permits Notifications .
 Enhanced The Required Milestone For KFMG Audit Requirments ( External Auditor For KFMB’S.).
 Identifed The Unsafe Equipments Operation And Conditions While Demonstrating Knowledge Of
Appropriate Corrective Action For Unsafe Conditions Or Equipment Use.
 Facilitated Root Cause Analyses And Develop Corrective Action Plans To Address Root Basic
Causes And Management Of Weak-Spots.
 Act As A Change Leader By Influencing All Levels Of KFMB’S For Contioes Safety Improvement.
 Perform Commissioning And Start Up Services For Firefighting And Fire Systems.

2.Centamin Egypt Limited . Process Commissioning Engineer / Trainer . 09/2009 - Till 05/
2014

 Upgraded Fuel Tanks Area Process Safety .


 Project Coordinator / Mineral Process Consultants ( G.P.M / Uk - London ).
Walid Kamal
 Adress 01 : Building No.94 - ST 30 –Khitan –Farwniya ( Kuwait )

Egypt :+201065202427- kuwait +965-65968303 walid2081981 [email protected]

 Procress Project Engineer for( 4 ) Medium Pressure Blower And (3) Low Pressure Blowers.
 Stage 4& 5 Commissioning / Project Engineer .( eluation speartion - Thicking- Waste
Managment(.
 Project Coordinator / Mineral Process Consultants ( G.P.M / Uk - London ).
 Acting Project Manager 32 Megawatt – Power Station (Wärtsilä Finland ).
 Lead Process Engineer For Feasibility Study To Develop Existing Plant HP Compressors.
 Optimized The Process Safety For Carbon Regeneration/ Boiler Unit Process Upgrade.
 Engineer Out Energy Control Program Isolation LOTO .
 Develop Bilingual S.O.P For All Process Plant Operation .
 Managing Engineering Contractors Piping Modification Risk Assessment.
Maintained Agitation Tanks Maintence Project Jop Safety Report .
Senior Process Trainer /Supervisor .1/2011-1/2013.
 Responsible For Assisting The Mill Training& Safety Coordinator In The Design And
Implementation Of A Comprehensive Training Program For Process Operators. Develop And
Deliver Of Function Specific Training Modules With In The Mill Department
 Demonstrated Experience Indevelopment And Delivery On Jop Training And Classroom Based
Training - Develop And Implement The S.O.P
 Demonstrate Positive Saftey Leader Ship For The Mill And Other Side Personal
 Coordnate The Development Of Mill Operator Trainee,
 Ensuring That Equipment Works To Its Specification And To Appropriate Capacities.
Effective Sampling And Metlirigical Test.
 Engineer Out, Develop And Lockout Tag Out System.

 Provide Safe Work Operation For Both Sag&Ball mill In Both Field And Control Room , Fixing
The Mill Power Trends, Lubrication System, Feed Convers ,Apron Feeders, Whih Crushed Ore
Stock Pile Management.

 Gold Room Operator 6/2010-1/2011.


2 X Pressure ZEDRA Stripping Uinits Operator – Gold Smelting – Carabon Regeneration
Operation , Process Engineering Calculation , Metallurgy Setting , Mineral Cone Operation –Gold
Shipping .

 Control Room Operator 9/2009-5/2010.

3. Oil Tech - Oil Refinaray co. Process Saftey Engineer 1/3/2008: 1/9/2009

 Upgraded P& ID For New Existing Refinery Plant Operations.


 Act As Prime Contact For Licensor's And Process Consultants, Suppliers.
 Recommend Design Changes & Process Safety Improvements
 HAZOPS Team Leader .
 Coordinated The R&D(Research & Development ) Engineering Projects .
 Project Engineer New Cooling Towers For Pocess Oil Refinery Upgrade .
 Maintaed The Steam Ejector Operation Condations.
 Demystified To Plant Operator (S) The Chemical Engineering Skill To Provide Safe Work
Practice.

4. Egyption Navy HSSE Supervisor Mediterranean Sea – 21/4/2007 : 1/9/2008.

 Collaborated With BG British Gas Team To Monitor The PTW (Permit To Work) And Military
Approvals For )BG( British Gas Concection - Mediterranean Sea – Alexandria Region .
 Spearheaded Emergency Team – Oil & Gas Offshore (S)support - EMAS ( Egyption Authority
For Maritime Safety ).
 Evaluate Construction Contractors & Suppliers Beds & Safety Aspects.
Walid Kamal
 Adress 01 : Building No.94 - ST 30 –Khitan –Farwniya ( Kuwait )

Egypt :+201065202427- kuwait +965-65968303 walid2081981 [email protected]

 Upgraded Utility Boilers Up Grad Project- Egyption Navy Collage .


 Investgated The Environmental Incidents The Oil Spillage Disaster With The Egyption Navy
General Safety Authority .
 Spearheaded of Annual Navy Inspection 2008 Egyption Aramy Operations Inspection Authority .
 Develop And Implement Solutions To Gas Storage Field Operating And Maintenance Problems.
 Evaluate Engineering Contractor's Drawings, Calculations And Specifications .
 Interface With Construction Contractors Used In Equipment And Piping Modifications. Resolve
Construction Issues.
 Interface With Supply Chain To Provide Technical Guidance For The Procurement Of Material
And Services.

5. SHELL EGYPT. Process Engineer ( Bed-3 Oil & Gas Fields) 1/1/2006 : 1/3/2007.
 Provide A Technically Competent And Effective Inspection Service For The Static Equipment And
Piping In The Plant.
 Evaluate And Design Emergency Relief Equipment For New And Existing Devices To Ensure
Regulatory Compliance .
 Retrieved And Enhance Fluid Flow Models That Are Used In Relief Device Sizing.
 Perform Safety Evaluations In Order To Approve Proposed Changes And Sign Off On MOCs.
 Operate Pumping Equipment To Transfer Oil And Gas From Wellheads To Production Facilites .
 Developed Safe Work Procedure Control The Flow Of Oil And Gas Through Pipelines.
 Develop And Implement Compression, Natural Gas Processing And Piping Projects.
 Interface With Operations Staff In The Support Of Equipment And Piping Modifications.
 Performed Critical Liaison Between Engineering And Field Operations.
 Prepare Engineering Calculations, Equipment Specifications And Construction Specifications In
Support Of Piping And Equipment Modifications .
6. Oriantal Petrochemicals Co . Process Engineer 2003 : 2005
 Dvelopment Safety And Environmental Rules For Propylene Jetty Operations. QRA For
Distillation / Purifcation Area .
 Conduct The Fludized Bed Reactor Reactor Area Inspections .
 Monitor The Controls Through Local And Computer Controlled Systems DCS, Observe Gauges
And Instruments On Equipment In Felid .
 Optimed The Catalytic Bed Reactor Catalyst Pump Performance .
 Optimize The Performance Of Proplylene Drayers And Regeneration Cycle Time Management.

Confernces : Speaker For 8th International HSSE Paper No. PDC15A0188.ASSE( American
Socity Of Safety Engineers) / Kuwait Dec 2015.

Certificates& Education:

2010-Current: Higher Diploma In Chemical Engineering: ( Alexandria university ) the following


cources are already accomplished .

(Safety Engineering & Measurments Equipments – Air Poullation (Types- Sources) –


Treatment Of Industrial Wastes Liquieds - Crrosion And Equipments Protection – Advanced
Chemical Reaction Engineering – Modern Refinery Methods – Petrochemical Industries-
Advanced Heat Transfer ) .

2001-2006:B. Sc In Chemical Engineering 2001-2006. Higher Institute For Engineering – Cairo.

Graduation Project : ( Gas Dyhydehyaration And Glycol Regeneration– Shell Egypt ).

Professional MemberShip : Kuwait Socity Of Engineers - Egyption Syndicate Of Enginners .


Walid Kamal
 Adress 01 : Building No.94 - ST 30 –Khitan –Farwniya ( Kuwait )

Egypt :+201065202427- kuwait +965-65968303 walid2081981 [email protected]

Professional Technical Training:

 Approved Trainer – IIRSM – UK.


 Teaching - Training & Assessing Diploma ( City & Gluids )- Uk ( On Going ).
 PMP ( Project Management Professional ) Preparation Certification Course. PMI - USA
 Commissioning And Strart Up ( PTS – Process Technical Services – Houston - USA ).
 Accident ,Incident Investingation / National Consultant Office – Kuwait.
 Work shop safety / National Consultant Office – Kuwait.
 Certified [OSHA] Construction & Scaffolding .
 Compressors / Blowers Commissioning – Operation & Maintenance. (KASER Germany) .
 Oxygen Column Safety Operation.( Airliquide – France ) .
 Chemical Management - MSDS/ Chemical Safety / Chemical Managment – Waste Management
- Work At Hights- Permit to work - Jop Safety Analysis – Sukari Gold Mines S.G.M Egypt).
 Facilities Security – Navy Security Branch - Egyption Navy Units .

Languages:

 English : Fluent, Both Spoken And Written.


Personal Data:
 Birth Date: 20th Augest1981. Nationality: Egyptian.

You might also like