PRODUCT DATA SHEET
SikaCim® Accelerator
SET ACCELERATOR ADMIXTURE
DESCRIPTION CHARACTERISTICS / ADVANTAGES
A concentrated solution of accelerating, plasticizing, ▪ Rapid set time
and shrinkage-reducing agents. It is added to Portland ▪ Low shrinkage
cement to produce quick setting mortar. ▪ Good adhesion
▪ High early strength & compressive strength.
USES
To produce quick setting, low shrinkage, high strength
concrete patches.
It can be used for sealing leakages and for plugging
water infiltrations in concrete.
PRODUCT INFORMATION
Packaging 900 mL x 10, tray
Appearance / Colour Liquid / Clear
Shelf life 12 months from date of production if stored properly in undamaged un-
opened, original sealed packaging.
Storage conditions Store in dry conditions at temperatures between +5 °C and +30 °C. Protect
from direct sunlight and frost.
Density ~1.28 kg/L
APPLICATION INFORMATION
Recommended Dosage Added to the mixing water within the range 1:0 – 1:5.
APPLICATION INSTRUCTIONS MIXING
SikaCim® Accelerator is to be used with fresh Portland
DISPENSING cement.
Actual initial and final setting time will vary with differ-
SURFACE PREPARATION ent brands of cement and job conditions, test with
Chip away deteriorated, unsound substrate. small quantities of cement to be used should be con-
Clean cavity completely. ducted on job site to determine proper dilution ratio
for the desired setting time.
Product Data Sheet
SikaCim® Accelerator
November 2017, Version 01.01
021402021000000052
1/2
APPLICATION
LEGAL NOTES
As Waterplug The information, and, in particular, the recommenda-
Plug cement paste into crack or hole. Hold in place tions relating to the application and end-use of Sika
with hand, until it has hardened. products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
As Dry Pack Mortar properly stored, handled and applied under normal
Used for patching concrete structures. conditions in accordance with Sika's recommenda-
Dry pack mortar is made with 1 part OPC + 2 sand + tions. In practice, the differences in materials, sub-
SikaCim diluted with 2 to 5 parts water, depending on strates and actual site conditions are such that no war-
setting time desired. ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
BASIS OF PRODUCT DATA legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
All technical data stated in this Data Sheet are based mendations, or from any other advice offered. The
on laboratory tests. Actual measured data may vary user of the product must test the product’s suitability
due to circumstances beyond our control. for the intended application and purpose. Sika re-
serves the right to change the properties of its
LOCAL RESTRICTIONS products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
Note that as a result of specific local regulations the current terms of sale and delivery. Users must always
declared data and recommended uses for this product refer to the most recent issue of the local Product Data
may vary from country to country. Consult the local Sheet for the product concerned, copies of which will
Product Data Sheet for the exact product data and be supplied on request.
uses.
ECOLOGY, HEALTH AND SAFETY
For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
to the most recent Safety Data Sheet (SDS) containing
physical, ecological, toxicological and other safety-re-
lated data.
PT. Sika Indonesia Head Office and
Jl. Raya Cibinong-Bekasi Km.20
Limusnunggal-Cileungsi
Bogor 16820-Indonesia
Tel. +62 21 8230025, Fax +62 21 8230026
Web: idn.sika.com
Email:
[email protected] SikaCimAccelerator-en-ID-(11-2017)-1-1.pdf
Product Data Sheet
SikaCim® Accelerator
November 2017, Version 01.01
021402021000000052
2/2
