Scribd
Upload
320 views

Anti Theft Control System Design Using Embedded System

This document describes an anti-theft control system for automobiles that uses an embedded system to prevent vehicle theft. It uses proximity sensors to detect when a key is inserted, then requires the user to enter a password. If an incorrect password is entered three times, the system sends alerts to the owner and police with the vehicle's location from the GPS module. It also disables the fuel injector. The system aims to provide fast response to theft attempts through password protection and remote immobilization and tracking of the vehicle.

Uploaded by

dileeppatra
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
320 views

Anti Theft Control System Design Using Embedded System

This document describes an anti-theft control system for automobiles that uses an embedded system to prevent vehicle theft. It uses proximity sensors to detect when a key is inserted, then requires the user to enter a password. If an incorrect password is entered three times, the system sends alerts to the owner and police with the vehicle's location from the GPS module. It also disables the fuel injector. The system aims to provide fast response to theft attempts through password protection and remote immobilization and tracking of the vehicle.

Uploaded by

dileeppatra
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Anti Theft Control System Design Using

Embedded System
AIM:

In this project we present an anti theft control system for automobiles that tries
to prevent the theft of a vehicle using GSM.

BLOCK DIAGRAM:

LCD
Power Supply

Keypad
Relay Engine
Micro
IR TX
Controller
GSM module
Proximity
Key
sensor

GPS module
Photodiode

POWER SUPPLY:

Step Down Bridge Filter Regulator


Transformer Rectifier Circuit section
DESCRIPTION:

In this paper we present a novel anti theft control system for automobiles that tries to
prevent the theft of a vehicle. This system makes use of an embedded chip that has an inductive
proximity sensor, which senses the key during insertion and sends a text message to the owner’s
mobile stating that the car is being accessed. This is followed by the system present in the car
asking the user to enter a unique password. The password consists of few characters and the car
key number. If the user fails to enter the correct password in three trials, a text message is sent to
the police with the vehicle number and the location tracked using a GPS module. The message is
also sent to the owner about the unauthorized usage. Further the fuel injector of the car
deactivated so that the user cannot start the car by any means. At the same time a secret lock
system gets activated and the unauthorized user gets trapped inside the car and only the owner
who is equipped with the key to the secret lock system can deactivate the mechanism. This
technique helps in taking fast steps towards an attempt to steal the .The design is robust and
simple.

WORKING OF THE ANTI-THEFT CONTROL SYSTEM:

When the key is inserted in the key hole the inductive proximity sensor detects the key and
triggers the microcontroller. A password check message is displayed on the LCD provided inside
the car and at the same time the owner is alerted with a message about the usage of his car.
Totally three trials are provided to enter the correct password. If the entered password is
incorrect a second electronic lock system gets activated and the doors are locked. An alert
message is sent to the police and the owner about the illegal access of his car. With the help of
GPS the exact location of his car is found and the key of the second lock system is available only
with the owner hence a total control over the vehicle is established.
GSM:
GSM (Global System for Mobile communications) is the technology that underpins most
of the world's mobile phone networks. The GSM platform is a hugely successful wireless
technology and an unprecedented story of global achievement and cooperation. GSM has
become the world's fastest growing communications technology of all time and the leading
global mobile standard, spanning 218 countries. GSM is an open, digital cellular technology used
for transmitting mobile voice and data services. GSM operates in the 900MHz and 1.8GHz bands
GSM supports data transfer speeds of up to 9.6 kbps, allowing the transmission of basic data
services such as SMS.

SOFTWARE’S USED:
1. Embedded C
2. Keil IDE
3. ISP or U-Flash
4. Express PC

HARDWARE USED:
 MICRCONTROLLER
 POWER SUPPLY
 GSM module
 GPS module
 MATRIX KEYPAD
 LINEAR KEYPAD
 LCD
 PROXIMITY SENSOR
 ENGINE
 IGNITION KEY

APPLICATIONS:

 Used for automobiles that tries to prevent the theft of a vehicle

RESULT:
Hence, by implementing this project the vehicle will be able to protect from theft by
using GSM technology.

You might also like