Scribd
Upload
52 views

Machine Model CSTATT

1. The CSTATT model represents a static condenser (STATCON) device that can inject or absorb reactive power through thyristor control. 2. The device has two regulators that control the thyristors to maintain the reactive power output (MVAR) at or below the specified limit based on the voltage (VT) and current (IT). 3. The model is supported by the Power System Simulator for Engineering (PSSE) software for power flow and stability analysis.

Uploaded by

Manuel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
52 views

Machine Model CSTATT

1. The CSTATT model represents a static condenser (STATCON) device that can inject or absorb reactive power through thyristor control. 2. The device has two regulators that control the thyristors to maintain the reactive power output (MVAR) at or below the specified limit based on the voltage (VT) and current (IT). 3. The model is supported by the Power System Simulator for Engineering (PSSE) software for power flow and stability analysis.

Uploaded by

Manuel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Machine Model CSTATT

Static Condenser (STATCON) Model CSTATT

𝐿𝐿𝐿𝐿𝐿 𝑀𝑀𝑀 = 𝑉𝑇 + 𝑋𝑇 𝐼𝐶𝐶𝐶𝐶0


States:
1 – Regulator 1 where
2 – Regulator 2 𝑖𝑖 (𝑉𝑇 ≥ 𝑉𝑐𝑐𝑐𝑐𝑐𝑐 ) 𝑡ℎ𝑒𝑒 𝐼𝐶𝐶𝐶𝐶0 = 𝐼𝐶𝐶𝐶𝐶
3 – Thyristor 𝐼𝐶𝐶𝐶𝐶 𝑉𝑇
𝑒𝑒𝑒𝑒 𝐼𝐶𝐶𝐶𝐶0 =
𝑉𝑐𝑐𝑐𝑐𝑐𝑐

Also, 𝐿𝐿𝐿𝐿𝐿 𝑀𝑀𝑀 ≤ 𝐸𝑙𝑙𝑙𝑙𝑙


Other Signals
VOTHSG 𝑉𝑚𝑚𝑚 𝐿𝐿𝐿𝐿𝐿 𝑀𝑀𝑀 𝐸𝑇
− −
− (1 + 𝑠𝑇1 )(1 + 𝑠𝑇2 ) 𝐾 + 1 𝑀𝑀𝑀𝑀𝑀
|𝑉| ∑ ∑ 𝐼𝑆𝑆
− (1 + 𝑠𝑇3 )(1 + 𝑠𝑇4 ) 𝑠 𝑋𝑡 𝑆𝑆𝑆𝑆𝑆
+ 3
1 2

𝑉𝑅𝑅𝑅 𝑉𝑚𝑚𝑚 𝐿𝐿𝐿𝐿𝐿 𝑀𝑀𝑀

𝐷𝐷𝐷𝐷𝐷

𝐿𝐿𝐿𝐿𝐿 𝑀𝑀𝑀 = 𝑉𝑇 − 𝑋𝑇 𝐼𝐿𝐿𝐿𝐿0


V is on the high-side of the generator step-up if integrated where
transformer step-up is included.
𝑖𝑖 (𝑉𝑇 ≥ 𝑉𝑐𝑐𝑐𝑐𝑐𝑐 ) 𝑡ℎ𝑒𝑒 𝐼𝐿𝐿𝐿𝐿0 = 𝐼𝐿𝐿𝐿𝐿
𝐼𝐿𝐿𝐿𝐿 𝑉𝑇
𝑒𝑒𝑒𝑒 𝐼𝐿𝐿𝐿𝐿0 =
𝑉𝑐𝑐𝑐𝑐𝑐𝑐
Model supported by PSSE

You might also like