Scribd
Upload
182 views1 page

Zincalume G550 Steel: Metallic Coated - MC Structural - S

This document provides information about ZINCALUME® G550 steel, including its general description, typical uses, standards, guaranteed properties of the steel base, chemical composition, metal coating adhesion, fire hazard properties, dimensional capabilities, fabricating performance, and important information. The steel has a zinc/aluminum alloy coating and guaranteed minimum yield strength of 550 MPa, intended for uses like roofing and walling.

Uploaded by

Ewo50 New
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
182 views1 page

Zincalume G550 Steel: Metallic Coated - MC Structural - S

This document provides information about ZINCALUME® G550 steel, including its general description, typical uses, standards, guaranteed properties of the steel base, chemical composition, metal coating adhesion, fire hazard properties, dimensional capabilities, fabricating performance, and important information. The steel has a zinc/aluminum alloy coating and guaranteed minimum yield strength of 550 MPa, intended for uses like roofing and walling.

Uploaded by

Ewo50 New
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ZINCALUME® G550 steel

Revision 0 February 2013

This literature supersedes all previous issues

Metallic Coated - MC Structural - S

GENERAL DESCRIPTION TYPICAL USES


Roofing and walling
ZINCALUME® G550 steel is a hot-dipped zinc/aluminium alloy-coated structural
steel with a spangle surface and a guaranteed minimum yield strength of 550 STANDARDS
Mpa Certified Standards – TIS2228-2535
Reference Standards - AS 1397/ASTM A792 A792M/JIS G3321
AS 1365/ASTM A924 A924M

GUARANTEED PROPERTIES OF STEEL BASE CHEMICAL COMPOSITION OF STEEL BASE


MECHANICAL PROPERTIES GUARANTEED MINIMUM CHEMICAL PROPERTIES GUARANTEED MAX %
Longtitudinal Tensile Carbon - C 0.2
Yield Strength, MPa 550 Phosphorus - P 0.04
Tensile Strength, MPa 550 Manganese – Mn 1.2
Elongation on 80mm (≥ 0.60mm)% 2 Sulphur - S 0.03

METAL COATING ADHESION - 180° BEND TEST FIRE HAZARD PROPERTIES

COATING CLASS INDEX RANGE RESULT


AZ150 2t Ignitability Index 0-20 0

AZ200 2t Spread Of Flame Index 0-10 0


Heat Evolved Index 0-10 0
Where t = the diameter of mandrel in terms of thickness of product.
Smoke Developed Index 0-10 0-1

DIMENSIONAL CAPABILITIES NORMAL/OPTIONAL SUPPLY CONDITIONS


THICKNESS RANGES PRODUCT MAX. WIDTH MM NORMAL OPTIONAL
(mm) Coating Class AZ150, AZ200
0.20 – 0.24 940 Surface Condition Spangled
0.25 – 0.29 1220 Surface Treatment Passivated & Resin
0.30 – 1.00 1160 coated
Branding Branded Not branded

Important Notes
Notes: These dimensions are a reflection of technical capability to produce.
Supply conditions may be subject to dimensional restrictions and is subject to Optional supply conditions may be subject to dimensional restrictions
BlueScope Sales and Marketing confirmation. Slitting and shearing available on request from
BlueScope Sales Offices. For requirements outside the standard product range please contact
your local Sales Office.

FABRICATING PERFORMANCE
METHOD RATING METHOD RATING
Bending 5 Lock Forming NR
Drawing 2 Welding 4
Pressing 2 Painting Pretreatment 5
Roll Forming 5
Where: 1 = Limited to 5 = Excellent or NR = Not Recommended
IMPORTANT INFORMATION
Typical mechanical properties are based on typical product despatched to customers. Note that ductility will decline through a natural ageing process during storage and/or paint stoving cycle.
Material should be used promptly (within six months) to avoid the possibility of a storage related corrosion. For selection of the most appropriate metallic coated steel, please refer to technical
bulletins TB1a, TB1b, CTB21 and CTB22. For storage, rollforming lubricants and other information please refer to the Technical Bulletins.

NS BLUESCOPE (THAILAND) LIMITED


Address : 7 th Floor, Bangkok-Thai Tower, 108 Rangnam Road, Phayathai, Rajthevi, Bangkok 10400 Thailand
Contact Phone: +662 333 3000 www.bluescopesteel.co.th

ZINCALUME®, Clean COLORBOND®, PRIMA®, P-ZACS®, JINGJOE LEK™,ZACS®, CRP ANTIBACTERIAL™, SHUTTEREX®, TRUECORE®, GALVASPAN®,
TRUZINC® and BlueScope are registered trademarks of BlueScope Steel Limited ABN 16 000 011 058
Please ensure you have the current data sheet for this product as displayed at www.bluescopesteel.co.th

You might also like