V-Pol - Heavy Duty Cardiod Dipole Array - 180° - 3.0 DBD
V-Pol - Heavy Duty Cardiod Dipole Array - 180° - 3.0 DBD
156 MHz
A linear array of two VHF dipole elements with phasing harness mounted on an
aluminium boom. Careful attention to element phasing results in a “Cardiod” shaped
radiation pattern with high F/B ratio compared to an equivalent sized Yagi antenna.
Antennas of this type find use in PMR/Trunked Radio and Broadcast applications
7256xxx
needing very high F/B performance. Produced to the highest quality standards, these
robust antenna designs will insure reliable operation in harsh environmental conditions. V-Pol | Heavy Duty Cardiod Dipole Array | 180° | 3.0 dBd
Replace “xxx” with desired model number option.
Electrical Characteristics
Frequency range 68..156 MHz
±1.5% (typical)
Bandwidth
Wide band versions available to meet specific needs
Polarization Vertical
Horizontal beamwidth 180°
Vertical beamwidth 76°
Gain 3.0 dBd
Impedance 50Ω
VSWR <1.5:1
Front-to-back ratio >20 dB
Maximum power 300 W
Connector type N-Female + 3.5m of RG213 cable
Lightning protection DC grounded
* Other frequencies available upon request.
Mechanical Characteristics
Boom, 49 mm dia., aluminium
Materials Elements, 19 mm dia., aluminium
Balun, epoxy potted, polyester enclosed
Dimensions LxWxD 100 MHz: 2500 x 1350 x 110 mm 98.4 x 53.1 x 4.3 in
Weight without bracket 100 MHz: 10.0 kg 22.0 lbs
Wind load @ 160 km/hr (100 mph) 100 MHz: 330 N 74.2 lbf
Mounting Options
Mounting bracket 0300064/00 + U-bolts to match mounting pipe diameter.
Please order Mounting Bracket separately.
Horizontal Vertical
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
REV0111 www.amphenol-jaybeam.com 1