Low Voltage alternators - 4 pole

LSA 42.3
25 to 60 kVA - 50 Hz / 31.5 to 75 kVA - 60 Hz

Electrical and mechanical data

4802en - 2012.02 / c
 LSA 42.3 - 4 Pole

SPECIALLY ADAPTED TO APPLICATIONS

The LSA 42.3 alternator is designed to be suitable for typical generator applications, such as: backup,
marine applications, rental, telecommunications, etc.

COMPLIANT WITH INTERNATIONAL STANDARDS

The LSA 42.3 alternator conforms to the main international standards and regulations:
- IEC 60034, NEMA MG 1.22, ISO 8528-3, CSA / UL on request, marine regulations, etc.
It can be integrated into a CE marked generator.
The LSA 42.3 is designed, manufactured and marketed in an ISO 9001 environment and ISO 14001.

TOP OF THE RANGE ELECTRICAL PERFORMANCE

● Class H insulation.
● Standard 12 wire re-connectable winding, 2/3 pitch, type no. 6.
● Voltage range:
- 50 Hz: 220 V - 240 V and 380 V - 415 V (440 V)
- 60 Hz: 208 V - 240 V and 380 V - 480 V
● High efficiency and motor starting capacity.
● Other voltages are possible with optional adapted windings:
- 50 Hz: 440 V (no. 7), 500 V (no. 9), 690 V (n°10 or 52)
- 60 Hz: 380 V and 416 V (no. 8), 600 V (no. 9)
● THD Total harmonic distortion < 2% (full load).
● R 791 interference suppression conforming to standard EN 55011 group 1 class B standard for European zone (CE marking).

REINFORCED MECHANICAL STRUCTURE USING FINITE ELEMENT MODELLING

● Compact rigid assembly to better withstand generator vibrations.
● Steel frame.
● Aluminium flanges and shields.
● Two-bearing and single-bearing versions designed to be suitable for commercially-available heat engines.
● Half-key balancing two bearing.
● Permanently greased bearings (20 000h).
● Direction of rotation : clockwise and anti-clockwise (without derating).

EXCITATION AND REGULATION SYSTEM SUITED TO THE APPLICATION

Excitation system Regulation options

T.I. R726* R 731* R 734*
Voltage 3-Phase sensing on Potentiometer
SHUNT AREP PMG Current transformer Mains 3-Phase
regulator for paralleling paralleling sensing
mains paralleling Remote voltage
unbalanced
R 220 Std - - - - - - -
R 438 - Std Std √ √ √ √ √
R 450 Optional Optional Optional √ √ √ √ √
D510* Optional Optional Optional √ inclus inclus contact factory √
* Steel terminal box mounting only. √: Possible mounting.
COMPACT AND DESIGN TERMINAL BOX
● Easy access to the AVR (lid) and to the connections.
● 8 way terminal block for reconnecting the voltage.
● Predrilled holes for cable gland.
● Steel terminal box in option.

PROTECTION SYSTEM SUITED TO THE ENVIRONMENT

● The LSA 42.3 is IP 23.
● Standard winding protection for clean environments with relative
humidity ≤ 95%, including indoor marine environments.
Options: - Filters on air inlet : derating 5%.
- Filters on air inlet and air outlet (IP 44) : derating 10%.
- Winding protection for harsh environments and relative humidity greater than 95%.
- Space heaters.
- Thermal protection for stator windings.
- Height fixing : H = 225 mm (option) with the order ..

Copyright 2004: MOTEURS LEROY-SOMER

LEROY-SOMER reserves the right to modify the design, technical specifications and dimensions of the products shown in this document. The descriptions cannot in
any way be considered contractual. The values indicated are typical values.

2
 LSA 42.3 - 4 Pole

General characteristics
Insulation class H Excitation system SHUNT AREP or PMG
Winding pitch 2/3 (wdg 6) AVR type R 220 R 438
Number of wires 12 Voltage regulation (*) ± 0.5 % ± 0.5 %
Protection IP 23 Short-circuit current - 300% (3 IN): 10 s
Altitude ≤ 1000 m Totale Harmonic distortion THD (**) no load < 3% - on load < 2%
Overspeed 2250 min-1 Waveform: NEMA = TIF (**) < 50
Air flow 0.10m3/s, 50 Hz - 0.13m3/s, 60 Hz
(*) Steady state. (**) Total harmonic distortion between phases, no-load or on-load (non-distorting).

Ratings 50 Hz - 1500 R.P.M.

kVA / kW - P.F. = 0,8
Duty/T°C Continuous duty/40°C Continuous duty/40°C Stand-by/40°C Stand-by/27°C
Class/T°K H/125°K F/105°K H/150°K H/163°K
Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph.
Y 380V 400V 415V 440V ∆∆ 380V 400V 415V 440V ∆∆ 380V 400V 415V 440V ∆∆ 380V 400V 415V 440V ∆∆
∆ 220V 230V 240V 230V 220V 230V 240V 230V 220V 230V 240V 230V 220V 230V 240V 230V
YY 220V 220V 220V 220V
42.3 VS1 kVA 25 24,5 15 22,8 22,3 13,7 26,5 26 15,9 27,5 27 16,5
kW 20 19,6 12 18,2 17,9 10,9 21,2 20,8 12,7 22 21,6 13,2
42.3 VS2 kVA 27 24,2 16,2 24,6 22,0 14,7 28,9 25,7 17,3 30 26,6 18
kW 21,6 19,4 13 19,7 17,6 11,8 23,1 20,5 13,9 24 21,3 14,4
42.3 VS3 kVA 32 30 19,2 29,1 27,3 17,5 34 31,8 20,4 35,2 33,0 21,1
kW 25,6 24 15,4 23,3 21,8 14 27,1 25,4 16,3 28,2 26,4 16,9
42.3 S4 kVA 35 30,6 22 32 27,9 20 37,1 32,5 23,3 38,5 33,7 24,2
kW 28 24,5 17,6 25,5 22,3 16 29,7 26 18,7 30,8 27,0 19,4
42.3 S5 kVA 40 35 25 36,4 31,9 22,8 42,4 37,1 26,5 45 38,5 28.1
kW 32 28 20 29,1 25,5 18,2 33,9 29,7 21,2 36 30,8 22.5
42.3 M7 kVA 45 39 27 41 35,5 24,6 48,2 41,3 28,9 50 42,9 30
kW 36 31,2 21,6 32,8 28,4 19,7 38,5 33,1 23,1 40 34,3 24
42.3 M8 kVA 50 43 30 45,5 39,1 27,3 53 45,6 31,8 55 47,3 33
kW 40 34,4 24 36,4 31,3 21,8 42,4 36,5 25,4 44 37,8 26,4
42.3 L9 kVA 60 51,6 36 54,6 47,0 32,8 63,6 54,7 38,2 66 56,8 40
kW 48 41,3 28,8 43,7 37,6 26,2 50,9 43,8 30,5 52,8 45,4 32

Ratings 60 Hz - 1800 R.P.M.

kVA / kW - P.F. = 0,8
Duty/T°C Continuous duty/40°C Continuous duty/40°C Stand-by/40°C Stand-by/27°C
Class/T°K H/125°K F/105°K H/150°K H/163°K
Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph.
Y 380V 416V 440V 480V ∆∆ 380V 416V 440V 480V ∆∆ 380V 416V 440V 480V ∆∆ 380V 416V 440V 480V ∆∆
∆ 220V 240V 240V 220V 240V 240V 220V 240V 240V 220V 240V 240V
YY 208V 220V 240V 208V 220V 240V 208V 220V 240V 208V 220V 240V
42.3 VS1 kVA 29,1 31,3 31,5 31,5 18,9 26,5 28,4 28,7 28,7 17,2 30,8 33,1 33,4 33,4 20 32 34,4 34,7 34,7 20,8
kW 23,3 25 25,2 25,2 15,1 21,2 22,8 22,9 22,9 13,8 24,7 26,5 26,7 26,7 16 25,6 27,5 27,7 27,7 16,6
42.3 VS2 kVA 29,9 31,9 33,8 33,8 20,3 26,9 29 30,7 30,7 18,4 31,4 33,8 35,8 35,8 21,5 32,5 35,1 37,5 37,5 22,3
kW 23,7 25,5 27 27 16,2 21,5 23,2 24,6 24,6 14,7 25,1 27,1 28,6 28,6 17,2 26 28,1 30 30 17,8
42.3 VS3 kVA 34,5 38 40 40 24 31,4 34,6 36,4 36,4 21,8 36,6 40,3 42,4 42,4 25,4 38 41,8 44 44 26,4
kW 27,6 30,4 32 32 19,2 25,1 27,7 29,1 29,1 17,5 29,3 32,2 33,9 33,9 20,4 30,4 33,4 35,2 35,2 21,1
42.3 S4 kVA 37.5 40,3 42,9 43,8 27,5 33,4 36,6 39,0 39,8 25 39 42,7 45,4 46,4 29,2 40,4 44,3 47,2 48,1 30,3
kW 30 32,2 34,3 35 22 26,8 29,3 31,2 31,9 20 31,2 34,1 36,4 37,1 23,3 32,3 35,4 37,7 38,5 24,2
42.3 S5 kVA 42 46 49 50 31,3 38,2 41,9 44,6 45,5 28,4 44,5 50 51,9 53 33,1 46,2 50,6 53,9 55 34,4
kW 33,6 36,8 39,2 40 25 30,6 33,5 35,7 36,4 22,8 35,6 40 41,6 42,4 26,5 37 40,5 43,1 44 27,5
42.3 M7 kVA 46 50 53,5 56,5 33,9 41,9 45,5 48,7 51,4 30,8 48,8 53 56,7 59,9 35,9 50,6 55 58,9 62,5 37,5
kW 36,8 40 42,8 45,2 27,1 33,5 36,4 38,9 41,1 24,7 39 42,4 45,4 47,9 28,7 40,5 44 47,1 50 30
42.3 M8 kVA 51,5 56,5 59,5 62,5 37,5 46,9 51,4 54,1 57 34,1 54,6 60 63,1 66,3 39,8 56,7 62,5 65,5 68,8 41,3
kW 41,2 45,2 47,6 50 30 37,5 41,1 43,3 45,5 27,3 43,7 48 50,5 53 31,8 45,3 50 52,4 55 33
42.3 L9 kVA 59 65 69 75 45 53,7 59,2 62,8 68,3 41 62,5 68,9 73,1 79,5 47,7 64,9 71,5 75,9 82,5 49,5
kW 47,2 52,0 55,2 60 36 43,0 47,3 50,2 54,6 32,8 50,0 55,1 58,5 63,6 38,2 51,9 57,2 60,7 66,0 39,6

3
 LSA 42.3 - 4 Pole
Efficiencies 50 Hz (— P.F. : 0.8 ) ( ...... P.F. : 1 )
LSA 42.3 VS1 LSA 42.3 S5
95% 95%
93 93.2 92.7
91.9
92.3 91.9 91.7 90.2 92.4
90 90
90.3 89.8
88.3 88.9 87.3
88.5 88.4 88.6 88
85 86.7 85
86.2

80 80
0 5 10 15 20 25 30 35 40 45 50 55 kVA 0 5 10 15 20 25 30 35 40 45 50 55 kVA
LSA 42.3 VS2 LSA 42.3 M7
95% 95% 93.5
92.4
93.3 93
92.1 91.9 90.7 92.7
91.7
90 90
88.7 90.8 90.3
89 88.5 89.1 88.6
87.2 86.6 88.9
85 86.6 85

80 80
0 5 10 15 20 25 30 35 40 45 50 55 kVA 0 5 10 15 20 25 30 35 40 45 50 55 kVA
LSA 42.3 VS3 LSA 42.3 M8
95% 95%
92.5 92.6 93.4
92.1 93.7 93.8 93.1
91.8 91.2
90 90
89.5 91.3 90.8 89.7
89.6 89 89.2
87.1 89.6
85 87.5 87.7 85

80 80
0 5 10 15 20 25 30 35 40 45 50 55 kVA 0 5 10 15 20 25 30 35 40 45 50 55 kVA
LSA 42.3 S4 LSA 42.3 L9
95% 95% 94.2
93.8
92.7 93.2 93 92.8
89.3 92 94.3
93.6 90.5
90 90 92.1 91.6
90.3 90.1 90.6
89.2 88.8 90
87.6
85 85

80 80
0 5 10 15 20 25 30 35 40 45 50 55 kVA 0 10 20 30 40 50 60 70kVA

Reactances (%). Time constants (ms) - Class H/400 V

VS1 VS2 VS3 S4 S5 M7 M8 L9
Kcc Short-circuit ratio 0,52 0,49 0,45 0,44 0,44 0,46 0,45 0,47
Xd Direct-axis synchro. reactance unsaturated 232 244 268 242 276 274 279 230
Xq Quadrature-axis synchro. reactance unsaturated 116 122 134 121 138 137 140 115
T’do No-load transient time constant 788 793 806 848 848 882 910 992
X’d Direct-axis transient reactance saturated 14,7 15,4 16,6 14,3 16,3 15,5 15,3 11,6
T’d Short-circuit transient time constant 50 50 50 50 50 50 50 50
X”d Direct-axis subtransient reactance saturated 7,4 7,7 8,3 7,1 8,1 7,8 7,7 5,8
T”d Subtransient time constant 5 5 5 5 5 5 5 5
X”q Quadrature-axis subtransient reactance saturated 10,5 11,0 11,9 10.2 11,6 11,0 10,9 8,2
Xo Zero sequence reactance unsaturated 0.60 0.80 0.70 0.09 0.10 0.20 0.80 0.90
X2 Negative sequence reactance saturated 8,95 9,35 10,11 8.64 9,88 9,39 9,28 6,99
Ta Armature time constant 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5
Other class H/400 V data
io (A) No-load excitation current (SHUNT/AREP) 0,85/0,55 0,8/0,52 0,79/0.51 0,75/0,49 0,75/0,49 0,71/0,46 0,78/0,5 0,77/0,5
ic (A) On-load excitation current (SHUNT/AREP) 2,66/1,74 2,63/1,72 2,71/1,77 2,36/1,54 2,66/1,73 2,68/1,75 2,86/1,86 3,13/2,04
uc (V) On-load excitation voltage (SHUNT/AREP) 18,9/29,6 18,7/29,2 19,1/29,9 16,6/26 18,6/29,1 18,6/29 19,6/30,6 21/32,8
ms Response time (∆U = 20% transient) < 500ms < 500ms < 500ms < 500ms < 500ms < 500ms < 500ms < 500ms
kVA Start (∆U = 20% cont. or (∆U = 30% trans.) SHUNT 51,7 56 67,7 92 92 103,5 115 138
kVA Start (∆U = 20% cont. or (∆U = 30% trans.) AREP 60,5 65,5 79,2 107,6 107,6 121,1 134,5 161,5
% Transient ∆U (on-load 4/4) SHUNT - P.F.: 0.8 LAG < 18% < 18% < 18% < 18% < 18% < 18% < 18% < 18%
% Transient ∆U (on-load 4/4) AREP - P.F.: 0.8 LAG < 18% < 18% < 18% < 18% < 18% < 18% < 18% < 18%
W No-load losses 689 710 764 881 881 943 979 1051
W Heat dissipation 2951 3209 3692 4237 4237 4529 4735 5207

4
 LSA 42.3 - 4 Pole

Transient voltage variation 400 V - 50 Hz

Phase loading (SHUNT) Phase loading (AREP & PMG)

VS1 VS2 VS3 S4 S5 M7 VS1 VS2 VS3 S4 S5
30 % M8
30 %
M7

L9 M8
25 25
L9

20 20
Voltage drop

Voltage drop
15 15

10 10

5 5

0 40 80 120 kVA 0 40 80 120 kVA

kVA at PF Ø 0.8 kVA at PF Ø 0.8

Load shedding (SHUNT) Load shedding (AREP & PMG)

VS1 VS2 VS3 S4 S5 VS1 VS2 VS3 S4 S5
40% 40%
M7
M7
M8
M8
30 30
L9 L9
Voltage drop

Voltage drop

20 20

10 10

0 40 80 120 kVA 0 40 80 120 kVA

kVA at PF Ø 0.8 kVA at PFØ 0.8

Motor starting (SHUNT) Motor starting (AREP & PMG)

VS1 VS2 VS3 S4 S5 M7 M8 VS1 VS2 VS3 S4 S5 M7
40% 40%
M8
L9
L9

30 30
Voltage drop

Voltage drop

20 20

14%

10 10

0 40 80 120 160 200kVA 0 40 80 120 160 200kVA

45.8
locked rotor kVA at PF Ø 0.6 locked rotor kVA at PF Ø 0.6

1 ) For a PF with a Ø other than 0.6, multiply the kVA by K = Sin Ø / 0.8
Example of calculation for a PF with a Ø other than 0.6: motor starting kVA calculated at PF Ø 0.4 = 40 kVA
Sin Ø 0.4 = 0.9165 K = 1.145 corrected kVA = 45.8 kVA Corresponding voltage drop for M8 = 14 %.
2 ) For a voltage U other than 400 V ( Y ) , 230 V ( ) at 50 Hz, multiply the kVA by (400/U) 2 or (230/U) 2 .

5
 LSA 42.3 - 4 Pole

Efficiencies 60 Hz (— P.F. : 0.8 ) ( ...... P.F. : 1 )

LSA 42.3 VS1 LSA 42.3 S5
95% 95% 93.3 93.5
92.6 92.2 93
92.1 91.9 92.7
90 88.5 90
90.3 90.9 90.5 88.8
89.5 89.2 88.7 89.3
88 87.4
85 86.7 85

80 80
0 10 20 30 40 50 60 70kVA 0 10 20 30 40 50 60 70kVA
LSA 42.3 VS2 LSA 42.3 M7
95% 95% 93.8
92.8 92.3 93.5 93.3 93
92.3
92 90.7
90 90 91.4
88.8 91 89.3
89.7 89.4 89.3 89.8
88.2 87.6
85 87 85

80 80
0 10 20 30 40 50 60 70kVA 0 10 20 30 40 50 60 70kVA

LSA 42.3 VS3 LSA 42.3 M8 93.7

95% 95% 93.9
92.7 93 92.4 94.1 93.4
92.1
90 90 91.2 91.8 91.4 89.8
89.6 90.1 89.8 90.3
89.7 88.4 87.8
87.9
85 85

80 80
0 10 20 30 40 50 60 70kVA 0 10 20 30 40 50 60 70kVA
LSA 42.3 S4 LSA 42.3 L9
95% 95% 94.4 94.1
92.9 93.6 93.3
93.1 94.6
92 93.8 91.1
90 92.6 92.2
90.8 90.8 90
89.4 90 89.5 90.8 90.6
87.9
85 85

80 80
0 10 20 30 40 50 60 70kVA 0 10 20 30 40 50 60 70 80 kVA

Reactances (%). Time constants (ms) - Class H/480 V

VS1 VS2 VS3 S4 S5 M7 M8 L9
Kcc Short-circuit ratio 0,52 0,49 0,45 0,44 0,44 0,46 0,45 0,47
Xd Direct-axis synchro. reactance unsaturated 244 254 279 252 288 286 263 217
Xq Quadrature-axis synchro. reactance unsaturated 122 127 140 126 144 143 132 108
T’do No-load transient time constant 788 793 806 848 848 882 910 992
X’d Direct-axis transient reactance saturated 15,5 16,0 17,3 14.8 17,0 16,2 14,5 10,9
T’d Short-circuit transient time constant 50 50 50 50 50 50 50 50
X”d Direct-axis subtransient reactance saturated 7,7 8,0 8,7 7.4 8,5 8,1 7,2 5,5
T”d Subtransient time constant 5 5 5 5 5 5 5 5
X”q Quadrature-axis subtransient reactance saturated 11,1 11,5 12,4 10.6 12,1 11,5 10,3 7,7
Xo Zero sequence reactance unsaturated 0.63 0.83 0.73 0.09 0.10 0.21 0.83 0.94
X2 Negative sequence reactance saturated 9,40 9,74 10,53 9 10,29 9,82 8,74 6,58
Ta Armature time constant 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5
Other class H/480 V data
io (A) No-load excitation current (SHUNT/AREP) 0,55/0,85 0,52/0,8 0,51/0,79 0,49/0,75 0,49/0,75 0,46/0,71 0,5/0,77 0,5/0,77
ic (A) On-load excitation current (SHUNT/AREP) 1,76/2,69 1,73/2,65 1,77/2,72 1,54/2,36 1,73/2,66 1,75/2,68 1,84/2,82 1,99/3,06
uc (V) On-load excitation voltage (SHUNT/AREP) 30,2/19,3 29,7/19 30,3/19,4 26,4/16,9 29,4/18,8 29,5/18,8 30,9/19,7 32,9/21,1
ms Response time (∆U = 20% transient) < 500ms < 500ms < 500ms < 500ms < 500ms < 500ms < 500ms < 500ms
kVA Start (∆U = 20% cont. or (∆U = 30% trans.) SHUNT 53,8 58,3 70,5 95,8 95,8 107,8 119,8 143,8
kVA Start (∆U = 20% cont. or (∆U = 30% trans.) AREP 63,0 68,3 82,5 112,1 112,1 126,1 140,2 168,2
% Transient ∆U (on-load 4/4) SHUNT - P.F.: 0.8 LAG < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 %
% Transient ∆U (on-load 4/4) AREP - P.F.: 0.8 LAG < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 %
W No-load losses 859 886 957 1110 1110 1192 1241 1336
W Heat dissipation 3442 3620 4215 4774 4774 5122 5340 5854

6
 LSA 42.3 - 4 Pole

Transient voltage variation 480 V - 60 Hz

Phase loading (SHUNT) Phase loading (AREP & PMG)

VS1 VS2 VS3 S4 S5 M7 VS1 VS2 VS3 S4 S5
30 % 30 %
M8 M7
L9 M8
25 25
L9

20 20
Voltage drop

Voltage drop
15 15

10 10

5 5

0 40 80 120 kVA 0 40 80 120 kVA

kVA at PF Ø 0.8 kVA at PF Ø 0.8

Load shedding (SHUNT) Load shedding (AREP & PMG)

VS1 VS2 VS3 S4 S5 VS1 VS2 VS3
40% 40% S4
S5
M7
M7
M8
30 30 M8
L9
L9
Voltage drop

Voltage drop

20 20

10 10

0 40 80 120 kVA 0 40 80 120 kVA

kVA at PF Ø 0.8 kVA at PF Ø 0.8

Motor starting (SHUNT) Motor starting (AREP & PMG)

VS1 VS2 VS3 S4 S5 M7 M8 VS1 VS2 VS3 S4 S5
40% 40% M7
L9 M8

L9

30 30
Voltage drop

Voltage drop

20 20

13%

10 10

0 40 80 120 160 200kVA 0 40 80 120 160 200kVA

45.8
locked rotor kVA at PF Ø 0.6 locked rotor kVA at PF Ø 0.6

1 ) For a PF with a Ø other than 0.6, multiply the kVA by K = Sin Ø / 0.8
Example of calculation for a PF with a Ø other than 0.6: motor starting kVA calculated at PF Ø 0.4 = 40 kVA
Sin Ø 0.4 = 0.9165 K = 1.145 corrected kVA = 45.8 kVA Corresponding voltage drop for M8 = 13 %.
2 ) For a voltage U other than 480 V (Y), 277 V ( ), 240 V (YY) at 60 Hz, multiply the kVA by (480/U)2 or (277/U)2 or (240/U)2.

7
 LSA 42.3 - 4 Pole

3-phase short-circuit curves at no load and rated speed (star connection Y)

10000

LSA 423 VS1 Symmetrical

1000
Asymmetrical
Current (A)

100
AREP

10

SHUNT

time (ms)
1 10 100 1000 10000

10000

LSA 423 VS2 Symmetrical

1000 Asymmetrical
Current (A)

AREP
100

10
SHUNT

time (ms)
1 10 100 1000 10000

10000

LSA 423 VS3 Symmetrical

1000 Asymmetrical
Current (A)

AREP
100

10

SHUNT

time (ms)
1 10 100 1000 10000
10000

LSA 423 S4 Symmetrical

1000
Asymmetrical
Current (A)

AREP
100

10
SHUNT

time (ms)
1 10 100 1000 10000

Influence due to connection

Curves shown are for star (Y) connection.
For other connections, use the following multiplication factors:
- Series delta : Current value x 1.732 - Parallel star : Current value x 2

8
 LSA 42.3 - 4 Pole

3-phase short-circuit curves at no load and rated speed (star connection Y)

10000

LSA 423 S5 Symmetrical

1000 Asymmetrical
Current (A)

AREP
100

10
SHUNT

time (ms)
1 10 100 1000 10000

10000

LSA 423 M7 Symmetrical

1000 Asymmetrical
Current (A)

AREP
100

10
SHUNT

time (ms)
1 10 100 1000 10000

10000

LSA 423 M8 Symmetrical

1000 Asymmetrical
Current (A)

AREP
100

10
SHUNT

time (ms)
1 10 100 1000 10000

10000

LSA 423 L9 Symmetrical

1000 Asymmetrical
AREP
Current (A)

100

10
SHUNT

time (ms)
1 10 100 1000 10000

Influence due to short-circuit 3-phase 2-phase L/L 1-phase L/N

Curves are based on a three-phase Instantaneous (max.) 1 0.87 1.3
short-circuit.
Continuous 1 1.5 2.2
For other types of short-circuit,
use the following multiplication factors Maximum duration (AREP/PMG) 10 sec. 5 sec. 2 sec.

9
 LSA 42.3 - 4 Pole

Single bearing dimensions

L
LSA 42.3 L9 - S.A.E. 3 XBG Ø 11 holes equid. over Ø M
L LB 420
AH LB AH 89 32 32 89 47 Access to Access to
β°
terminals AVR
3 3 Xg
Optional
PMG
Cable
outlet

264
103 52
Ø 64
Ø N - 0.127
- 0.050
Ø BX - 0.100
Ø N - 0.127
- 0.050
Ø BX - 0.100

+0

Ø 235
Ø 455
+0

ØP

X Ø Y holes
equid. over
ØU

+1
H -3
97
78.5 Optional
AIR
AIR OUTLET AIR OUTLET INLET H = 225 A2

5
112.5 137
112.5 A1
5 C 5
14

C 18

Dimensions
Dimensions(mm)
(mm)etand
masses
weight H = 180 (Standard) H = 225 (Option) Accouplement
Coupling
Type
Type L LB Xg Weight
Masse(kg)
(kg) C A1 A2 C A1 A2 Flange
Bride 2 3 4
LSA 42.3 VS1 565 503 237 115 260 307 279 301,5 400 356 Flex
Disque
plate
LSA 42.3 VS2 565 503 242 120 260 307 279 301,5 400 356 11 1/2 x x -
LSA 42.3 VS3 565 503 252 131 260 307 279 301,5 400 356 10 x x x
LSA 42.3 S4 610 548 275 156 260 307 279 315 400 356 8 - x x
LSA 42.3 S5 610 548 275 156 260 307 279 315 400 356 7 1/2 - x x
LSA 42.3 M7 650 588 287 171 260 307 279 315 400 356
LSA 42.3 M8 650 588 295 176 260 307 279 315 400 356
LSA 42.3 L9 662 622 310 186 260 307 279 315 400 356

Bride (mm)
Flange (mm) Disque
Flex (mm)
plate (mm)
S.A.E. P N M XBG β° S.A.E. BX U X Y AH
4 406 361.95 381 12 15° 11 1/2 352.42 333.38 8 11 39.6
3 452 409.58 428.62 12 15° 10 314.32 295.28 8 11 53.8
2 490 447.675 466.725 12 15° 8 263.52 244.48 6 11 62
7 1/2 241.3 222.25 8 9 30.2

Xr
Ø 18

Ø 41

Ø 30
Ø 60

Torsional analysis data Lr

Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm2): (4J = MD2)
Disque S.A.E. 7 1/2 Disque S.A.E. 8 Disque S.A.E. 10 Disque S.A.E. 11 1/2
TYPE Xr Lr M J Xr Lr M J Xr Lr M J Xr Lr M J
LSA 42.3 VS1 279 526.2 45.36 0.2209 277 558 45.68 0.2246 274 549.8 46.13 0.2363 272 535.6 46.62 0.2843
LSA 42.3 VS2 282 526.2 47.36 0.2337 280 558 47.68 0.2374 277 549.8 48.13 0.2491 274 535.6 48.62 0.2611
LSA 42.3 VS3 287 526.2 51.41 0.2592 286 558 51.73 0.2629 283 549.8 52.18 0.2746 281 535.6 52.67 0.2866
LSA 42.3 S4 310 571.2 61.49 0.317 308 603 61.81 0.3207 306 594.8 62.26 0.3324 304 580.6 62.75 0.3444
LSA 42.3 S5 310 571.2 61.49 0.317 308 603 61.81 0.3207 306 594.8 68.18 0.3645 304 580.6 62.75 0.3444
LSA 42.3 M7 325 611.2 67.41 0.3491 323 643 67.73 0.3528 321 634.8 68.18 0.3645 319 620.6 68.67 0.3765
LSA 42.3 M8 330 611.2 70.42 0.3683 328 643 70.74 0.372 326 634.8 71.18 0.3837 324 620.6 71.68 0.3957
LSA 42.3 L9 344 641.2 77.49 0.4141 342 673 77.81 0.4178 340 664.8 78.25 0.4295 338 650.6 78.75 0.4415

10
 LSA 42.3 - 4 Pole

Two bearing dimensions

L
4x2 M 10 holes on Ø 381 at 12h and 3h/6h/9hours
LB 420
82 Xg 89 32 32 89 47 Access to
Access to terminals 15° 15°
the AVR
1 M16 hole
Optional
36 depth
PMG
Cable
outlet

264
52
Ø 361.95 - 0.127

103
+0
Ø 452

Ø 235
Ø 48 k6

180 - 3
+1
14
51.5 9

97
213 1 M12 hole
11 AIR

5
INLET 18 depth
279
AIR OUTLET 139 137
320
18 18 14
6 C 172

Dimensions (mm)
TYPE L LB C Xg Weight (kg)
LSA 42.3 VS1 610 528 189.25 242 129
LSA 42.3 VS2 610 528 189.25 247 134
LSA 42.3 VS3 610 528 189.25 257 145
LSA 42.3 S4 655 573 202.75 280 170
LSA 42.3 S5 655 573 202.75 280 170
LSA 42.3 M7 695 613 202.75 292 185
LSA 42.3 M8 695 613 202.75 300 190
LSA 42.3 L9 725 643 202.75 314 207

Xr
Ø 48

Ø 50

Ø 41

Ø 30
Ø 60

Lr
Torsional analysis data
Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm2): (4J = MD2)
TYPE Xr Lr M J
LSA 42.3 VS1 238 603 45.18 0.2135
LSA 42.3 VS2 240 603 47.18 0.2263
LSA 42.3 VS3 245 603 51.23 0.2518
LSA 42.3 S4 267 648 61.31 0.3096
LSA 42.3 S5 267 648 61.31 0.3096
LSA 42.3 M7 281 688 67.23 0.3417
LSA 42.3 M8 286 688 70.23 0.3609
LSA 42.3 L9 299 718 77.29 0.4066

11
International network
w w w. l e r oy - s o m e r. c o m

ALGERIA GREECE SOUTH AFRICA

LEROY-SOMER International Division LEROY-SOMER Ltd LEROY-SOMER PTY LTD

AUSTRALIA HUNGARY SPAIN

LEROY-SOMER PTY LTD LEROY-SOMER I.M.I. LEROY-SOMER IBERICA S.A.
AUSTRIA INDIA
SWEDEN
LEROY-SOMER ELEKTROMOTOREN LEROY-SOMER C/O EMERSON ELECTRIC CO.
LEROY-SOMER NORDEN AB
BELGIUM ITALIA
LEROY-SOMER BELGIUM LEROY-SOMER SWITZERLAND
Contact LEROY-SOMER SA
BRAZIL JAPAN
LEROY-SOMER DIVISION LEROY-SOMER DIVISION TAIWAN
EMERSON ELECTRIC DO BRASIL ltda. EMERSON Japan Ltd. LEROY-SOMER LIAISON OFFICE

CANADA KOREA THAILAND

LEROY-SOMER / EMC EMERSON ELECTRIC KOREA LEROY-SOMER THAILAND
CHINA MOROCCO
TUNISIA
LEROY-SOMER Division CARREFOUR INDUSTRIEL ET TECHNOLOGIQUE
ULYSSE SPARE PARTS
CROATIA NETHERLANDS
Emerson Network Power Ltd LEROY-SOMER NEDERLAND B.V TURKEY
ELEKTROMEKANIK SISTEMLER
CZECH REPUBLIC POLAND
M.L.S. HOLICE S.R.O. FZN MARBAISE LS U.A.E.
LEROY-SOMER DIVISION
DENMARK ROMANIA EMERSON FZE
LEROY-SOMER DENMARK A/S LEROY-SOMER REPRESENTATIVE OFFICE

EGYPT www.leroy-somer.com
RUSSIA
UNITED KINGDOM
LEROY-SOMER LTD
MOTEURS LEROY-SOMER LEROY-SOMER DIVISION

FRANCE SAUDI ARABIA USA

MOTEURS LEROY-SOMER ABUNAYYAN TRADING CORPORATION LEROY-SOMER POWER AND DRIVES

GERMANY SINGAPORE VENEZUELA

LEROY-SOMER Marbaise GmbH LEROY-SOMER SOUTHEAST ASIA Pte Ltd LEROY SOMER C/O EMERSON ELECTRIC CA