Scribd
Upload
117 views

Economical Metal Anchor For Drywall and Hollow Block

The document summarizes a hollow wall metal anchor called the HTB-2 from Hilti. It consists of a metal channel threaded to accept a machine bolt and a plastic leg with a locking cap that facilitates fastening in drywall and hollow block walls up to 3 inches thick. It remains mounted in the wall without a screw for convenient handling and installation. It is made of galvanized carbon steel and polymers, and specifications and load ratings are provided for different wall materials and diameters.

Uploaded by

Pedro Lanuza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views

Economical Metal Anchor For Drywall and Hollow Block

The document summarizes a hollow wall metal anchor called the HTB-2 from Hilti. It consists of a metal channel threaded to accept a machine bolt and a plastic leg with a locking cap that facilitates fastening in drywall and hollow block walls up to 3 inches thick. It remains mounted in the wall without a screw for convenient handling and installation. It is made of galvanized carbon steel and polymers, and specifications and load ratings are provided for different wall materials and diameters.

Uploaded by

Pedro Lanuza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ECONOMICAL

METAL ANCHOR
FOR DRYWALL
AND HOLLOW
BLOCK
Hollow wall metal anchor
HTB-2 technical supplement
Hollow wall metal anchor HTB-2 Technical Supplement

PRODUCT DESCRIPTION
The Hilti hollow wall anchor HTB-2 consists of a metal channel threaded to accept a
machine bolt, and a plastic leg with a locking cap to provide a reliable fastening point
for anchoring to drywall and hollow block walls.

PRODUCT FEATURES
•P
 lastic leg and locking cap facilitate fastening in a wide range of drywall and hollow
wall materials up to 3” thick.
•S
 pring type mechanism helps ensure the metal channel engages the base material,
making installation easy every time.
•M
 etal teeth increase grip on the base material to prevent metal channel from spinning
during installation.
•R
 emains mounted in the wall without screw for convenient handling, installation, and
screw removal and replacement.
• Comprehensive offering with and without machine screws.

MATERIAL SPECIFICATIONS

Part Material

Metal channel Carbon steel galvanized to 5 microns


Cap washer Polypropylene copolymer
Leg High impact polystyrene
Screw Carbon steel galvanized to 3 microns

May 2018 2
TECHNICAL DATA

Allowable Loads For Hilti HTB-2 Hollow Wall Anchor1


Hollow Concrete
1/2" Drywall 5/8" Drywall
Hole Block
Diameter
Diameter
(in) Tension Shear Tension Shear Tension Shear
(in)
(lb) (lb) (lb) (lb) (lb) (lb)

3/16 1/2 45 65 85 120 145 200

1/4 1/2 45 65 85 120 200 270

3/8 3/4 45 65 85 120 300 500

1/2 3/4 45 65 85 120 300 500


1
Loads based on a factor of safety of four.

INSTALLATION INSTRUCTIONS
Installation Instructions For Use (IFU) are included with each product package. They
can also be viewed or downloaded online at www.us.hilti.com (US) and www.hilti.ca
(Canada). Because of the possibility of changes, always verify that downloaded IFU are
current when used. Proper installation is critical to achieve full performance. Training is
available on request. Contact Hilti Technical Services for applications and conditions
not addressed in the IFU.

ORDERING INFORMATION

Machine Machine Bit


Screw Screw Length Diameter
Description Diameter (in.) (in.) (in.)

HTB-2 Anchor 3/16" with SRH screw1 3/16 2-1/2 1/2


HTB-2 Anchor 3/16" with PFH screw2 3/16 2-1/2 1/2
HTB-2 Anchor 3/16" without screw 3
3/16 - 1/2
HTB-2 Anchor 1/4" with SRH screw1 1/4 2-1/2 1/2
HTB-2 Anchor 1/4" with PFH screw 2
1/4 2-1/2 1/2
HTB-2 Anchor 1/4" without screw3 1/4 - 1/2
HTB-2 Anchor 3/8" with SRH screw 1
3/8 2-1/2 3/4
HTB-2 Anchor 3/8" without screw3 3/8 - 3/4
HTB-2 Anchor 1/2" with SRH screw 1
1/2 2-1/2 3/4
HTB-2 Anchor 1/2" without screw3 1/2 - 3/4
1
Slotted round head (combination slotted/Phillips)
06/18 SM

2
Phillips flat head
3
Machine screws not included

Hilti, Inc. (U.S.) Hilti (Canada) Corp.


1-800-879-8000 I en español 1-800-879-5000 1-800-363-4458
www.hilti.com www.hilti.ca
3 June 2018

You might also like