STAAD.

Pro Report
To: From:

Copy to: Date: Ref:

25/08/2020 ca/ 515706203.docx

R.R. ISPAT (A UNIT OF GPIL)

RAIPUR (C.G.)

8 MTR POLE

Job Information

Engineer Checked Approved

Name:
Date: 25-Aug-20

Structure Type SPACE FRAME

Number of Nodes 4 Highest Node 4

Number of Elements 3 Highest Beam 3

Number of Basic Load Cases -2

Number of Combination Load Cases 1

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name
Primary 1 LOAD CASE 1
Primary 2 LOAD CASE 2
Primary 3 LOAD CASE 3
Combination 4 COMBINATION LOAD CASE 4

24/03/2021
 8.000m

Y
X
Z Load 1

8.000m

Y
X
Z Load 4

Whole Structure

24/03/2021
 PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.33 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= AUG 25, 2020 *
* Time= 20:47: 6 *
* *
* USER ID: RRI *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Desktop\8M POLE\POLE 8M.STD
2. START JOB INFORMATION
3. ENGINEER DATE 25-AUG-20
4. *8 MTR POLE
5. *TOP DIA OF MAST = 70 MM
6. *BOTTOM DIA OF MAST = 130 MM
7. *THICKNESS= 2.8MM
8. *MATERIAL
9. * FOR MAST -HIGH TENSILE PLATES OF FE 490 AS PER IS:2062
10. * FOR OTHER STRUCTURE - FE410 AS PER IS :2062
11. *FOLLOWING CONSIDERATION HAVE BEEN TAKEN
12. *WIND SPEED 180 KL/HR
13. *WIND LOAD CALCULATION AS PER IS:875
14. *LOAD 1- SELF WT. OF STRUCTURE
15. *LOAD 2- DEAD LOAD OF ACCESSARIES
16. *LOAD 3- WIND LOAD
17. *LOAD 4 - LOAD COMBINATION
18. END JOB INFORMATION
19. INPUT WIDTH 79
20. UNIT METER MTON
21. JOINT COORDINATES
22. 1 0 0 0; 2 0 8.00002 0; 3 1.5 8.20002 0; 4 -1.5 8.20002 0
23. MEMBER INCIDENCES
24. 1 1 2; 2 2 3; 3 2 4
25. DEFINE MATERIAL START
26. ISOTROPIC STEEL
27. E 2.03889E+007
28. POISSON 0.3
29. DENSITY 7.83337
30. ALPHA 6E-006
31. DAMP 0.03
32. TYPE STEEL
33. STRENGTH FY 25310.4 FU 40777.9 RY 1.5 RT 1.2
34. END DEFINE MATERIAL
35. MEMBER PROPERTY INDIAN
36. 2 3 TABLE ST TUB48483.7
37. MEMBER PROPERTY INDIAN
38. 1 PRIS HEX STA 0.13 END 0.07 THI 0.0028

24/03/2021
 STAAD SPACE -- PAGE NO. 2

39. CONSTANTS
40. MATERIAL STEEL ALL
41. SUPPORTS
42. 1 FIXED
43. LOAD 1 LOADTYPE DEAD TITLE LOAD CASE 1
44. SELFWEIGHT Y -1
45. LOAD 2 LOADTYPE DEAD TITLE LOAD CASE 2
46. JOINT LOAD
47. 3 4 FY -0.003
48. LOAD 3 LOADTYPE WIND TITLE LOAD CASE 3
49. MEMBER LOAD
50. 1 LIN Y 0.0102 0.0055
51. LOAD COMB 4 COMBINATION LOAD CASE 4
52. 1 1.0 2 1.0 3 1.0
53. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 4 NUMBER OF MEMBERS 3

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 1

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 2/ 2/ 18 DOF

TOTAL PRIMARY LOAD CASES = 3, TOTAL DEGREES OF FREEDOM =
18
TOTAL LOAD COMBINATION CASES = 1 SO FAR.
SIZE OF STIFFNESS MATRIX = 1 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.0/ 93343.0 MB

54. PARAMETER 1
55. CODE INDIAN
56. CHECK CODE ALL
STEEL DESIGN

24/03/2021
 STAAD SPACE -- PAGE NO. 3

STAAD.Pro CODE CHECKING - (IS-800:1984) v1.1

***********************

ALL UNITS ARE - MTON METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

1 PRI SMAT (INDIAN SECTIONS)

PASS IS-7.1.1(A) 0.884 4
0.10 C 0.00 -0.23 0.00
2 ST TUB48483.7 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.083 4
0.00 C 0.00 0.01 0.00
3 ST TUB48483.7 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.083 4
0.00 C 0.00 0.01 0.00

************** END OF TABULATED RESULT OF DESIGN **************

57. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= AUG 25,2020 TIME= 20:47: 6 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2015 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************

24/03/2021