Scribd
Upload
159 views1 page

Creeping Wave Probes

NDT Supply.com, Inc. is located in Lenexa, KS and sells creeping wave probes for ultrasonic testing. Creeping waves propagate just under a component's surface and are very sensitive to shallow cracks while being insensitive to surface condition. The maximum range is typically 45mm but the waves will reflect within the component. Creeping waves are less attenuated in austenitic and Inconel metals than shear waves. The company offers various probe models that differ by frequency, crystal size, connectors, and dimensions.

Uploaded by

Frank Pinedo Lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views1 page

Creeping Wave Probes

NDT Supply.com, Inc. is located in Lenexa, KS and sells creeping wave probes for ultrasonic testing. Creeping waves propagate just under a component's surface and are very sensitive to shallow cracks while being insensitive to surface condition. The maximum range is typically 45mm but the waves will reflect within the component. Creeping waves are less attenuated in austenitic and Inconel metals than shear waves. The company offers various probe models that differ by frequency, crystal size, connectors, and dimensions.

Uploaded by

Frank Pinedo Lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

NDT Supply.com, Inc.

7952 Nieman Road


Lenexa, KS 66214-1560 USA

Creeping Wave Probe


Creep Waves are high angle ultrasonic longitudinal waves. The creeping wave is actually the upper part of the
envelope of a 76˚ compression wave beam which propagates just under the component surface, see Figure.
These are not true surface waves and the energy is concentrated within a few millimeters of, and almost parallel
to, the surface. Hence, the technique is very sensitive to shallow surface-breaking cracks whilst at the same time
being relatively insensitive to surface condition.

The maximum working range is typically 45 mm in front of the probe because the creep wave rapidly loses
energy in the form of 33º indirect shear, or 'head', waves as it propagates. However, these head waves will re-
convert to a creep wave at the inner surface of the component. Like the top surface creep wave, this inner
surface creep wave is very sensitive to inner surface breaking cracks and as it runs parallel to the inner surface it
will not be sensitive to the presence of weld roots.

Creep waves have the advantage that, being longitudinal waves, they are far less attenuated in austenitic and
Inconel weld metal than shear waves.

Keiyu P/N Frequency MHz Crystal Size mm Connectors Dimensions AxBxCxD


2P6x10 76L 2 6x10 Lemo 00 17x20x22x2
2P6x10 86L 2 6x10 Lemo 00 17x20x22x2
2P8x10 76L 2 8x10 Lemo 00 17x20x22x2
2P8x10 86L 2 8x10 Lemo 00 17x20x22x2
2P10x15 76L 2 10x15 Lemo 00 22x28x28x3
2P10x15 86L 2 10x15 Lemo 00 22x28x28x3
4P6x10 76L 4 6x10 Lemo 00 17x20x22x2
4P6x10 86L 4 6x10 Lemo 00 17x20x22x2
4P8x10 76L 4 8x10 Lemo 00 17x20x22x2
4P8x10 86L 4 8x10 Lemo 00 17x20x22x2
4P10x15 76L 4 10x15 Lemo 00 22x28x28x3
4P10x15 86L 4 10x15 Lemo 00 22x28x28x3

Phone: 913-685-0675 [email protected]


Fax: 913-685-1125 www.ndtsupply.com

You might also like