Scribd
Upload
463 views1 page

Ready Reckoner For Schwing Concrete Pump Maintenance - BP 350

1. Initial maintenance after 50 working hours includes cleaning the filter cartridge and changing oil in the agitator gear box and compressor. 2. Normal maintenance includes daily checks of oil and water levels, weekly checks of oil levels, and monthly cleaning of the suction filter for the compressor. 3. Additional scheduled maintenance includes changing engine oil every 250 hours, cleaning the concrete pump every 1000 hours, and changing hydraulic oil every 2000 hours.

Uploaded by

Murthy YS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
463 views1 page

Ready Reckoner For Schwing Concrete Pump Maintenance - BP 350

1. Initial maintenance after 50 working hours includes cleaning the filter cartridge and changing oil in the agitator gear box and compressor. 2. Normal maintenance includes daily checks of oil and water levels, weekly checks of oil levels, and monthly cleaning of the suction filter for the compressor. 3. Additional scheduled maintenance includes changing engine oil every 250 hours, cleaning the concrete pump every 1000 hours, and changing hydraulic oil every 2000 hours.

Uploaded by

Murthy YS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

READY RECKONER FOR SCHWING CONCRETE PUMP MAINTENANCE - BP 350

2
Initial Maintenance

After 50 working hours


14
4
After 150 working hours
8 5.0 Maintenance Of Concrete Pump
After 250 working hours
14
5 1-
Clean the filter cartridge when the warning lamp lights up.
After 500 working hours
2-
Change oil in agitator gear box (spur gear fig. 16)
2 4-
Change oil in compressor
After 1000 working hours
5-
Change Hydraulic oil
6 11 6-
Check oil and water level (hydraulic tank, Flushing container
Daily
10 and water box) and replenish, if necessary.
7 9 7 - Check oil level in agitator gear box and compressor, replenish
Normal Maintenance

Weekly
if nacessary.
8 12 8 - Clean suction filter of compressor
Monthly
9 - Check system pressure (System- 240bar, Agitator - 90bar
8 Compressor - 140bar)
All 250 working hours
14 10 - Greasing of agitator shaft bushing. Drain condensed water
4 from hydraulic tank
All 1000 working hours
11 - Clean the concrete pump
2 5 12 - Check fixing bolts of components mounted on chassis frame
All 2000 working hours
13 for tightness.
13 - Change suction filter.
14 Change Engine oil, oil filter and diesel filter.
** Change the FORM LACE RINGs(80002541) : 1st after 700 cum, thereafter every 2000 cum of concrete.

** Engine oil (20W40) 18 liters, Fuel and oil filter : 1st after 50 hours, thereafter every 250 hours of operation.
RPM @ 2100
** Replace the RAMs(10007943) when sand starts coming into water box

** Replace the SEALING CONEs(10004928) when cement slury starts coming out from either sides of agitator
mounting.

** Replace the SEALING SET FOR PLUNGER(10011127) when hydraulic oil starts coming out from flushing
container.

** Replace the SEALING SET FOR ROD(10013369) when both the rings become too loose in the gate valve shaft.

** Hydraulic oil grade: SHELL TELLUS 2HF 68SS, Hudraulic Filter - 10002989

You might also like