0% found this document useful (0 votes)

148 views

2.3.8 Packet Tracer Navigate The Ios Using A Terminal Client For Console Connectivity Physical Mode

Uploaded by

Jimbo Baby Gaming

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

148 views

2.3.8 Packet Tracer Navigate The Ios Using A Terminal Client For Console Connectivity Physical Mode

Uploaded by

Jimbo Baby Gaming

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 4

Packet Tracer - Navigate the IOS Using a Terminal Client for

Console Connectivity - Physical Mode

Objectives
Part 1: Access a Cisco Switch through the Serial Console Port
Part 2: Display and Configure Basic Device Settings
Part 3: Access a Cisco Router Using a Mini-USB Console Cable

Background / Scenario
Various models of Cisco routers and switches are used in all types of networks. These devices are managed
using a local console connection or a remote connection. Nearly all Cisco devices have a serial console port
to which you can connect. Newer models also have a USB console port.
In this Packet Tracer Physical Mode (PTPM) activity, you will learn how to access a Cisco device via a direct
local connection to the console port, using the generic terminal emulation program in Packet Tracer. After you
have established a console connection with the Cisco device, you can display or configure device settings. In
this activity, you will only display settings and configure the clock in this lab.

Instructions

Part 1: Access a Cisco Switch through the Serial Console Port

In this part, you will connect a PC to a Cisco switch using a rollover console cable. This connection will allow
you to access the CLI and display settings and configure the switch.

Step 1: Install and investigate a 2960 switch.

a. There are several switches, routers, and other devices on the Shelf. Click and drag the 2960 to the Rack.
In Packet Tracer, most devices that you drag to the Rack or the Table are automatically connected to
power. Some devices require that you turn on the power. However, a 2960 switch powers up as soon as
you move it to the Rack.
b. Right click the 2960 switch and select Inspect Front. Use the zoom tool to get a better view. Notice that
there are 24 ports to connect users and two additional ports to connect the switch to other switches or
routers.
c. Click the X to close the Inspect Front view.
d. Right click the 2960 switch and select Inspect Rear. Use the zoom tool to get a better view. Notice that
there is a CONSOLE port for connecting a rollover cable to a PC.
e. Click the X to close the Inspect Rear View.

Step 2: Install and investigate the PC.

a. Click and drag the PC to the Table.
b. Right click the PC and select Inspect Front. Click the red power button to turn on the PC. You should
now see a green light on the front of the PC. At the bottom of the PC, notice that there is a Fast Ethernet
interface. Next to it is an RS 232 port for connecting a rollover cable. Below these are two USB ports that
can also be used for console access.

© 2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 4 www.netacad.com
Packet Tracer - Navigate the IOS Using a Terminal Client for Console Connectivity - Physical Mode

Step 3: Connect the switch and PC using a rollover console cable.

a. On the Cable Pegboard, click a blue rollover console cable.
b. On the PC, click the R2 232 port.
c. Right click the 2960 switch and choose Inspect Rear.
d. Click the CONSOLE port to connect the rollover console cable.

Step 4: Configure the Packet Tracer Terminal program to establish a console session with the
switch.
Terminal is a terminal emulation program that was created specifically for Packet Tracer. This program
allows you to access the terminal output of the switch. It also allows you to configure the switch.
a. Click PC > Desktop tab > Terminal. The default parameters for the console port are 9600 baud, 8 data
bits, no parity, 1 stop bit, and no flow control. The Terminal default settings match the console port
settings for communications with the Cisco IOS on the switch.
b. Click OK. The last line in the terminal output should be Press RETURN to get started!.
c. Press the ENTER key to get to the User EXEC mode switch prompt.
Open Configuration Window

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX,

RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 12-Oct-05 22:05 by pt_team

Press RETURN to get started!

<ENTER>

Switch>

Part 2: Display and Configure Basic Device Settings

In this part, you are introduced to the user and privileged EXEC modes. You will determine the IOS version,
display the clock settings, and configure the clock on the switch.

Step 1: Display the switch IOS image version.

While you are in the user EXEC mode, use the show version command to display the IOS version for the
switch.
Switch> show version
Question:

Which IOS image and version is currently in use by the switch?

Type your answers here.

Step 2: Configure the clock.

As you learn more about networking, you will see that configuring the correct time on a Cisco switch will be
helpful when you are troubleshooting problems. The following steps let you manually configure the internal
clock of the switch.
a. Display the current clock settings.
Switch> show clock
*00:30:05.261 UTC Mon Mar 1 1993

© 2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 4 www.netacad.com
Packet Tracer - Navigate the IOS Using a Terminal Client for Console Connectivity - Physical Mode

b. You must be in privileged EXEC mode to change the clock settings. To enter the privileged EXEC mode,
type enable at the user EXEC mode prompt.
Switch> enable
c. Configure the clock setting. The question mark (?) provides help and allows you to determine the
expected input for configuring the current time, date, and year. Press Enter to complete the clock
configuration.
Switch# clock set ?
hh:mm:ss Current Time
Switch# clock set 15:28:00 ?
<1-31> Day of the month
MONTH Month of the year
Switch# clock set 15:28:00 Nov 11 ?
<1993-2035> Year
Switch# clock set 15:28:00 Nov 11 2020
d. Enter the show clock command to verify that the clock setting has updated.
Switch# show clock
15:28:44.687 UTC Wed Nov 11 2020
Switch#
Close Configuration Window

Part 3: Access a Cisco Router Using a Mini-USB Console Cable

In this part, you will install a 4321 router and connect a laptop to the console using a mini-USB cable.

Step 1: Install and investigate a 4321 router.

a. Locate the 4321 router on the Shelf. Click and drag the 4321 router to the Rack.
b. Right click the 4321 router and select Inspect Front. Use the zoom tool to get a better view. Notice that
there is a power switch on the left. Click it to turn on the router. Also notice the other ports that are
available. There is an RJ-45 and a mini-USB port for console connectivity.
c. Click the X to close the Inspect Front view.

Step 2: Install and investigate the Laptop.

a. Click and drag the Laptop to the Table.
b. Right click the Laptop and select Inspect Front. Click the power button on the far left to turn the laptop
on. You should now see a green light. Notice that there are two RJ-45 ports: one for RS 232 and another
for Fast Ethernet. There are also two USB ports. You can use either of these to connect to the mini-USB
port on the 4321 router.
c. Click the X to close the Inspect Front view.

Step 3: Connect the router and laptop using a mini-USB cable.

a. On the Cable Pegboard, click a mini-USB cable.
b. On the Laptop, click a mini-USB port.
c. Click the mini-USB port on the 4321 router. You may want to right click and select Inspect Front to get a
closer view.

© 2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 4 www.netacad.com
Packet Tracer - Navigate the IOS Using a Terminal Client for Console Connectivity - Physical Mode

Step 4: Configure the Packet Tracer Terminal program to establish a console session with the
switch.
a. Click Laptop > Desktop tab > Terminal. The Terminal default settings match the console port settings
for communications with the Cisco IOS on the switch.
b. After the router has completed its startup process, the following message is displayed. Enter n to
continue.
Open Configuration Window

Initializing Hardware ...

cisco ISR4321/K9 (1RU) processor with 1687137K/6147K bytes of memory.

Processor board ID FLM2041W2HD
2 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
3223551K bytes of flash memory at bootflash:.

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: n

c. Press the ENTER key to get to the User EXEC mode router prompt.
Press RETURN to get started!

Router>
Open Configuration Window

Reflection Question
1. How do you prevent unauthorized personnel from accessing the Cisco device through the console port?
Type your answers.
2. What are the advantages and disadvantages of using the serial console connection compared to the USB
console connection to a Cisco router or switch?
Type your answers.
End of Document