Scribd
Upload
315 views2 pages

Summative Test in Automotive Servicing 8: Module 1 Q2 (Using and Applying Lubricant/Coolant)

This document is a summative test on automotive servicing that assesses knowledge of lubricants and coolants. The test contains multiple choice questions, true/false statements, and an enumeration section. Some key points covered include: - Coolant is a mixture of antifreeze and water that helps maintain engine temperature. - SAE ratings indicate oil viscosity grades suitable for different climates. - Diesel and gasoline engine oils have different properties. - Grease is an oil-based fluid that lubricates moving parts. - Safety precautions when working with lubricants include wearing eye protection and properly supporting the vehicle.

Uploaded by

Ariel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
315 views2 pages

Summative Test in Automotive Servicing 8: Module 1 Q2 (Using and Applying Lubricant/Coolant)

This document is a summative test on automotive servicing that assesses knowledge of lubricants and coolants. The test contains multiple choice questions, true/false statements, and an enumeration section. Some key points covered include: - Coolant is a mixture of antifreeze and water that helps maintain engine temperature. - SAE ratings indicate oil viscosity grades suitable for different climates. - Diesel and gasoline engine oils have different properties. - Grease is an oil-based fluid that lubricates moving parts. - Safety precautions when working with lubricants include wearing eye protection and properly supporting the vehicle.

Uploaded by

Ariel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Summative Test in Automotive Servicing 8

MODULE 1 Q2 ( USING AND APPLYING LUBRICANT/COOLANT )


Name: Score:
Grade & Section: Date:

I. Multiple Choice. Read each statement carefully. Choose the letter that corresponds to the correct answer. Encircle the
letter of the correct answer.

1. Lubricants absorbs heat of an ________. 10. It is a cryoprotectant of the


a. Radiator engine
b. Water pump a. Deterioration Inhibitors
c. Engine b. Grease
d. Distributor c. Oil
d. Antifreeze
2. It is a mixture of antifreeze and water.
a. Lubricants
b. Coolant
c. Gasoline
d. Air II.True or False. Write the word True if the statement is
3. Those are the chemicals added to the coolant to slow down
correct and word False if the statement is incorrect.
the corrosion rate of the metal of alloy.
a. Deterioration Inhibitors
b. Grease _______1. SAE 30 is an example of single grade oil.
c. Oil
d. Antifreeze _______2. SAE 20 and SAE 30 are suitable to be used in
moderate to hot climates.
4. SAE stands for? _______3. Diesel engine oils have different properties
a. Society of Automotive Engineers
b. Society of Automobile Executive than oils for gasoline engines.
c. Society of Automotive Experts _______4. Do not wear eye protection when dealing with
d. None of the above hazardous chemicals in the shop area.
5. This is a fluid-like mineral oil thickened with an agent that
_______5. It is not advisable to use low viscosity oil for
makes it semi-sold. starting and changing to an oil or higher viscosity
a. Deterioration Inhibitors when the engine is already running.
b. Grease
c. Oil
d. Antifreeze III.Enumeration
1-3 Materials needed in Changing Lubricating
6. The suffix “W” in the oil rating stands for _____ or the cold Oil/ Change Oil
start viscosity?
a. Weather 4-8 Tools and Equipment needed in Performing
b. Water Change Oil.
c. Winter 9-10 Give at least 2 safety precautions in Applying
d. Wall
Lubricants.
7. An engine system that supplies oil to the different engine
moving parts
a. Fuel System
b. Cooling System
c. Ignition System
d. Lubricating System

8. An engine system that helps to maintain the normal


temperature of the engine through the presence of coolant or
water.
a. Fuel System
b. Cooling System
c. Ignition System
d. Lubricating System

9. The process of limiting the effect of friction between two


moving parts.
a. Fabrication
b. Lubrication
c. Sanitation
d. Deterioration
Prepared by:

Robert S. Domingo
Master Teacher I

Checked by:

Pedro P. Ramos
HT VI- Boys’Trade- Voc’l. Dept.

Summative Test 1 ANSWER KEY


Test I.
1. C
2. B
3. A
4. A
5. B
6. C
7. D
8. B
9. B
10. D
Test II.
1. True
2. True
3. True
4. False
5. True
Test III.
Materials Needed in Changing Oil
1. Engine oil
2. Oil Filter
3. Rags
Tools Needed in Changing Oil
4. Box wrench
5. Filter Wrench
6. PPE
7. Manuals
8. Vehicle, Jack, Floor stands
Safety Precautions in Applying Lubricants
9. Wear eye protection or PPE
10. Provide support for the vehicle in raising it safely while
changing oil and lifter
- Be cautious in hot surfaces
- Read the vehicles manuals for clear and specific
procedures.

You might also like