Diesel Generator Set
MTU 10V1600 DS560
400 – 230 V/510 kVA/50 Hz/prime power/series 1600 – 10V1600
Optional equipment shown. Standard equipment may vary.
Product highlights
Benefits Wide standard scope of supply
— Industry-leading average load factor — 4P circuit breaker
— Low fuel consumption — Island operation control panel
— Emissions optimizations available — Integrated fuel tank
— High availability and reliability — Industrial silencer (15 dB(A))
— Outstanding load acceptance — Batteries & battery charger
— Long maintenance intervals
Complete range of accessories available
Support — Sound attenuated enclosure
— Global product support offered — Fuel system accessories
— Control panel & ATS
Standards — Range of additional electronical options
— Engine-generator set is designed and manufactured in
facilities certified to standards ISO 2008:9001 Warranty
— Generator set complies to ISO 8528 and fullfills — Standard 36 months warranty after shipment
performance level G3
— Generator meets BS5000; NEMA MG 1; ISO; DIN EN
and IEC standards
Available optimizations
— TA-Luft (NOx < 1500mg/m3 i.N.) optimized
— Exhaust emission EU 97/68 EC Stage III A
— NEA Singapore for off road diesel engines (ORDE)
— ARAI CPCB Stage II
— Fuel optimized
Application data 1)
Engine Generator
Manufacturer MTU Generator brand Mecc-Alte
Model 10V1600G20F Generator type HM355B1
Type 4-cycle Insulation class H-class
Arrangement 10V Bearing single bearing
Displacement: l 17.5 Enclosure IP23 M
Bore: mm 122 Voltage regulation A.V.R. (electronic)
Stroke: mm 150 Exciting system self-excited, brushless
Compression ratio 17.5
Rated rpm 1500 Electrical
Engine governor ECU 8 Electric system volts DC 24
Gross power: kWm 448 Number of batteries 2
Air cleaner dry Capacity: Ah 2x 75
Fuel system Air requirements
Max. fuel flow: l/hr 342 Aspirating: m³/min 27
Fuel tank capacity: OPU (EPU) in l 740 (740) Cooling air flow: m3/s 10.9
Autonomy: hr 9
Exhaust system
Fuel consumption l/h Gas temp. (stack): °C 520
At 100% of power rating: 108.87 Gas volume at stack temp.: m3/min 75
At 75% of power rating: 86.34 Maximum allowable back pressure: kPa 15
At 50% of power rating: 60.69
Cooling/radiator system
Liquid capacity Ambient capacity of radiator: OPU (EPU) in °C 50 (50)
Total oil system: l 60.5 Pressure on rad. exhaust: kPa 0.2
Total coolant capacity: l 94 Heat rejection to coolant: kW 216
Standard and optional features
System ratings (kW/kVA)
10V1600 DS560
Prime operation
Voltage 400 V
Phase Three phase
Hz 50
kWel* 408.0
kVA** 510
Rated AMPS 736.1
* cos phi = 1,0
** cos phi = 0,8
Also available for following voltages 380V & 415V - for details please contact your local MTU dealer.
1 Technical data is for a fuel-optimized unit.
Standard and optional features
Engine
4- strokes diesel engine Piston cooling via oil spray nozzle Dry exhaust manifolds
Flywheel housing SAE 1 Forged crankshaft & connecting rods Hot components and radiator guards
Flywheel 14’’ Oil pan Mobile components guards
Four-valve, overhead camshaft Lube oil circulation pump Lube oil filter
Fuel system
Fuel main filter Integrated fuel tank (level sensor Heavy-duty fuel pre-filter with water
Fuel pre-filter with water seperator and drain cap incl.) seperator
Common rail fuel injection Automatic fuel transfer pump 3-way valve for fuel filling
Fuel cooler
Generator
3-Phase, syncronos, brushless, IP23 M protection degree Insulation class H
self exciting, self regulating, IP23 protection cover Anti condensation heater
self ventilating alternator Bearing temperature sensors Permanent magnet
Winding temperature sensors
Control panel & electric options
Control and power electric panel, with Remote display ModBus connection to
measurements devices and contoller Expansion module for customer systems TCP/IP
ATS (Automatic Transfer Switch) CAN communication Control version for synchronizing with
Control version for parallel operation Change over power supply for MC7 mains without blackout
Control version for synchronizing a single Input output/LED expansion modules for Converter kits CAN to
genset with mains DeepSea controllers RS485/USB/LAN
Programmable timer for MM7 and MC7
Circuit breaker/power distribution
4 poles manual circuit breaker
(motorized with DeepSea controllers)
Starting/charging system
24V electric system Pre-heating resistance/jacket Battery charging alternator
Starting batteries installed water heater Battery disconnector
Battery charger
Air intake system
Exhaust turbochargers Intercooler, integrated in radiator
Set of dry-type air filters with Heavy duty air filter with automatic dust
contaiment indicator evacuation
Represents standard features
Represents optional features
Standard and optional features
Exhaust system
Industrial silencer 15 dB(A) Residential silencer 35 dB(A) Exhaust bellows
Cooling system
Coolant circulation pump Front type radiator for jacket water and Engine mounted fan drive
charge aircooling circuit with
integrated expansion tank
Mounting system
Mounted on steel base frame Resilent mounting of engine
and generator
Enclosures
Sound proof enclosure Socket box Increased fuel tank capacity
Documentation & certifications
Genset & component manuals CE-certification for EU
Maintenance schedule Fluids and lubricants specification
Represents standard features
Represents optional features
Weights and dimensions
Drawing above for illustration purposes only, based on standard open power 400 Volt engine-generator set. Lengths may vary with other voltages. Do not use for installation
design. See website for unit specific template drawings.
System Dimensions (L x W x H) Weight (wet/with standard accessories)
Open power unit (OPU) 3600 x 1604 x 2121 mm 4002 kg
Enclosed power unit 4500 x 1800 x 2340 mm 5712 kg
Consult the factory for accurate weights and dimensions for your specific engine-generator set. Lengths may vary with other voltages. Do not use for installation design.
Sound data
Unit type
Open power unit: dB(A) 104
Enclosed power unit: dB(A) 85
According to 2000/14/CE.
Sound data is provided at 1 m for 75% prime power.
Rating definitions and conditions
Subject to change. | 3237941 | Edition 01/19 | ESM 2019-09.
—— Prime power ratings apply to installations where utility power is
unavailable or unreliable. At varying load, the number of generator
set operating hours is unlimited. A 10% overload capacity is
available for one hour in twelve. Ratings are in accordance with
ISO 8528-1, ISO 3046-1, BS 5514, AS 2789 and DIN 6271.
Average load factor: < 75%.
—— Consult your local MTU distributor for derating information.
Rated power for reference conditions at 25°C and 100m above
sea level.
Rolls-Royce Group
www.mtu-solutions.com/powergen
