Steel Clamp Half Couplings

Adaptors & Bobbins

• Clamps to give a better fit

than a solid coupling

• Machined from solid steel

• Able to accommodate
normal shaft tolerances

• Available in standard sizes

(Both Metric and Imperial)

• Easy to install and position

• Wide range of stock

R & D Marine has developed a comprehensive range of competitively priced
Steel Clamp Half Couplings with flange sizes from 4 to 7 1/4 inch diameter.
• Competitively priced
Steel Clamp Half Couplings can accommodate the variations that occur with
normal shaft tolerances, are easy to install and can be adjusted to the required
• In - House customization
position on the shaft.

R & D Marine have the capacity to machine Split Half Couplings to special • Special Half Couplings can
sizes not in the literature. be supplied in small batches

R & D Marine can also offer pilot drilled Solid Half Couplings suitable for
parallel and taper boring. Adaptors to fit larger couplings to gearbox flanges • Worldwide availability
and Bobbins to extend the shaft.

Products are available ex-stock and worldwide through our distribution network.
 R & D Marine Steel Split Half Couplings
a

Supplied with Shaft Clamp Bolts and Nuts

Imperial Sizes
e g c& d Keyways to BS46: Part 1 Square

Metric Sizes
b Keyways to BS4235: Part 1 Rectangular

Shaded area designates range of bores covered. Units of measurement: Black Millimetres Red Inches
Imperial Bore Diameters (Inch) Coupling Dimensions
- - B D F H J K L M a b c d e f g
Part No Type of Gearbox Register

1.250

1.750

2.250

2.750
Diameter

.750
.875
1.00

1.50

2.00

2.50
Flange Hole Pitch No of Hole Size M = Male Length Boss
Diameter Circle Holes F = Female Diameter
202-153 4" BW, PRM, Hurth 102.0 82.55 10.0 63.5 81.0 85.9
B B B B 4 M
Max Bore 1.500 4.00 3.25 0.394 2.50 3.19 3.38
202-254 4" Yanmar 102.0 78.00 10.0 50.0 81.0 85.9
B B B 4 M
Max Bore 1.500 4.00 3.07 0.394 1.97 3.19 3.38
202-255 4" Volvo 102.0 80.00 10.0 60.0 85.8 85.9
B 4 F
Max Bore 1.500 4.00 3.15 0.394 2.36 3.28 3.38
202-489 4" Bukh 90.0 74.5 8.1 47.0 85.8 85.9
B 4 F
Max Bore 1.500 3.54 2.93 0.32 1.85 3.28 3.38
202-168 5" BW, PRM, Hurth, 127.0 107.95 11.2 63.5 95.3 103.2
P B BK BK BK BK 4 M
Volvo. Max Bore 2.000 5.00 4.25 0.44 2.50 3.75 4.06
202-316 5" Yanmar 119.9 100.00 10.0 65.0 95.3 103.2
P BK 4 M
Max Bore 2.000 4.72 3.94 0.394 2.56 3.75 4.06
202-176 6" PRM 146.0 120.6 12.7 76.2 139.7 136.7
P BK BK BK BK BK BK 6 M
Max Bore 2.500 5.75 4.75 0.50 3.00 5.50 5.38
202-188 6" Twin Disc 146 120.6 16.0 76.2 139.7 136.7
P BK BK 6 F
Max Bore 2.500 5.75 4.75 0.63 3.00 5.50 5.38
202-313 5" IRM 220, MG 502 127.0 98.6 12.0 63.5 143.0 103.2
P 6 F
Max Bore 2.000 5.00 3.88 0.47 2.50 5.63 4.06
202-381 7 1⁄4" PRM 601, 1000 4:1 189.2 152.4 16.0 95.25 190.5 168.4
P 6 M
Max Bore 2.750 7.45 6.00 0.63 3.75 7.50 6.63
202-468 7 1⁄4" PRM 1500 189.2 152.4 16.0 95.25 190.5 168.4
P 6 F
Max Bore 2.750 7.45 6.00 0.63 3.75 7.50 6.63
202-469 7 1⁄4" Twin Disc 189.2 152.4 19.0 95.25 190.5 168.4
P 6 F
Max Bore 2.750 7.45 6.00 0.75 3.75 7.50 6.63
202-470 7 1⁄4" ZF 311A 189.2 152.4 16.0 95.25 190.5 168.4
P 8 F
Max Bore 2.750 7.45 6.00 0.63 3.75 7.50 6.63
Metric Bore Diameters (mm) Coupling Dimensions
B C D F H J K L M N a b c d e f g
Part No Type of Gearbox Register
Diameter
22
25
30
35
40
45
50
55
60
70
Flange Hole Pitch No of Hole Size M = Male Length Boss
Diameter Circle Holes F = Female Diameter
202-165 4" BW, PRM, Hurth 102.0 82.55 10.0 63.5 81.0 85.9
B B B B 4 M
Max Bore 40mm 4.00 3.25 0.394 2.50 3.19 3.38
202-257 4" Yanmar 102.0 78.00 10.0 50.0 81.0 85.9
B B B 4 M
Max Bore 40mm 4.00 3.07 0.394 1.97 3.19 3.38
202-258 4" Volvo 102.0 80.00 10.0 60.0 85.8 85.9
B B B 4 F
Max Bore 40mm 4.00 3.15 0.394 2.36 3.28 3.38
202-490 4" Bukh 90.0 74.5 8.1 47.0 85.8 85.9
4 F
Max Bore 40mm 3.54 2.93 0.32 1.85 3.28 3.38
202-171 5" BW, PRM, Hurth 127.0 107.95 11.2 63.5 95.3 103.2
BK BK BK BK BK 4 M
Volvo. Max Bore 50mm 5.00 4.25 0.44 2.50 3.75 4.06
202-300 5" Yanmar 119.9 100.00 10.0 65.0 95.3 103.2
BK BK 4 M
Max Bore 50mm 4.72 3.94 0.394 2.56 3.75 4.06
202-178 6" PRM 146.0 120.6 12.7 76.2 139.7 136.7
BK BK BK BK BK 6 M
Max Bore 60mm 5.75 4.75 0.50 3.00 5.50 5.38
202-314 6" Twin Disc 146 120.6 16.0 76.2 139.7 136.7
BK BK 6 F
Max Bore 60mm 5.75 4.75 0.63 3.00 5.50 5.38
202-315 5" IRM 220, MG 502 127.0 98.6 12.0 63.5 143.0 103.2
6 F
Max Bore 50mm 5.00 3.88 0.47 2.50 5.63 4.06
202-466 7 1⁄4" PRM 601, 1000 4:1 189.2 152.4 16.0 95.25 190.5 168.4
6 M
Max Bore 70mm 7.45 6.00 0.63 3.75 7.50 6.63
202-471 7 1⁄4" PRM 1500 189.2 152.4 16.0 95.25 190.5 168.4
6 F
Max Bore 70mm 7.45 6.00 0.63 3.75 7.50 6.63
202-472 7 1⁄4" Twin Disc 189.2 152.4 19.0 95.25 190.5 168.4
6 F
Max Bore 70mm 7.45 6.00 0.75 3.75 7.50 6.63
202-473 7 1⁄4" ZF 311A 189.2 152.4 16.0 95.25 190. 168.4
8 F
Max Bore 70mm 7.45 6.00 0.63 3.75 7.50 6.63
P - Pilot Drilled B - Bored Only BK - Bored & Keyed
Recommended tightening torque: M10 - 61 Nm 45 lbsft 7/16 UNF - 81 Nm 60 lbsft 1/2 UNF - 100 Nm 75 lbsft 5/8 UNF - 210 Nm 155 lbsft
R & D Marine Gearbox Output Flange Adaptors
R & D Marine can provide an adaptor for most gearboxes to allow the fitting of a flexible coupling from their
extensive range. If the gearbox fitting you require is not listed please contact R & D Marine.

Flange machined to suit the gearbox Flange machined to fit the selected
output flange. R & D Flexible Coupling.
The register could be male or female The register could be male or female.
See listing below.

Length to clear oil pump etc

Gearbox Gearbox Coupling Maximum HP Effective length R & D Marine Effective length
Register of Coupling of Coupling Reference of Adaptor
kW HP Mm Inch Mm Inch
B/W, PRM, ZF-Hurth, Twin Disc, Volvo
4" to 5" Female 910-029 14.92 20 52.4 2.06 202-351 22.3 0.88
5" to 6" Female 910-032 27.6 37 55.4 2.18 202-411 74.7 2.94
Twin Disc
MG 502 Male 910-032 27.6 37 55.4 2.18 202-148 54 2.13
MG 5075A Male 910-039 41 55 63.3 2.49 EXP 249 69.9 2.75
MG 5090A Male 910-024 63.1 85 56.7 2.23 EXP 244 193.7 7.63
MG 5111 SC Male 910-022 44 65 44.5 1.75 EXP 147 17.8 0.70
MG 5111 Male 910-022 44 65 44.5 1.75 EXP 193 115.9 4.56
MG 5114 Male 910-025 20.9 28 49.8 1.96 EXP 184-2 45 1.75
MG 5114A Male 910-024 63.1 85 56.7 2.23 EXP 205 155.7 6.13
MG 5114A Male 910-030 89.52 120 58.4 2.30 EXP 238 155.7 6.13
MG 5135A Male 910.024 67.5 85 56.7 2.23 202-477 62.5 2.5
MGX 5145 SC Male 910-025 20.9 28 49.8 1.96 EXP 251 45 1.75
MGX 5145 SC Male 910-030 89.4 120 58.5 2.30 EXP 253 135 5.32
MGX 5145 SC Male 910-030 89.4 120 58.5 2.30 EXP 260 159 6.25
MG 6449 Male 910-030 89.4 120 58.5 2.30 EXP 208 46 1.81
ZF-Hurth
BW 61 Male 910-018 29.84 40 60.7 2.39 EXP 221 122.0 4.81
BW 120 Male 910-025 20.9 28 49.8 1.96 EXP 182 76 3.00
BW 195VP, 1950A Male 910-035 215 160 108.0 4.25 EXP 242 241.3 9.50
2000, 2050, 2050A
BW 250A Male 910-030 89.52 120 58.4 2.30 EXP 239 155.8 6.13
255A, 255AP
BW 255 VP Male 910-045 171.4 230 108.0 4.25 EXP 246 181 7.13
HSW 630 A1 Female 910-025 20.9 28 49.8 1.96 EXP 240 75 2.96
ZF 2000 Male 910-030 89.52 120 58.4 2.30 EXP 247 241 9.50
ZF 2500A Male 910-030 89.52 120 58.4 2.30 202-412 156 6.13
ZF 2500A Male 910-035 215 160 108.0 4.25 EXP 266 150 4.25
ZF 550A Male 910-030 89.52 120 58.4 2.30 EXP 245 124 4.88
IRM 220A Male 910-032 27.6 37 55.4 2.18 202-384 54 2.13
IRM 280A Male 910-039 41 55 63.5 2.49 202-382 97 3.82
IRM 280A Male 910-039 41 55 63.5 2.49 EXP 224 R1 25.4 1.00
IRM 280A Male 910-039 41 55 63.5 2.49 202-387 50.8 2.00
IRM 305A Male 910-033 27.6 37 55.4 2.18 EXP 234 115 4.53
IRM 311A Male 910-039 41 55 63.5 2.49 EXP 230 108 4.25
IRM 311A Male 910-024 63.1 85 56.7 2.23 EXP 259 266.7 10.50
IRM 311A Male 910-040 41 55 63.5 2.49 EXP 243 117.6 4.65
IRM 305A Male 910-040 41 55 63.5 2.49 EXP 261 130.0 5.12
IRM 311-PL Male 910-024 63.1 85 56.7 2.23 EXP 227 135 5.32
IRM 320A Male 910-018 29.84 40 60.7 2.39 EXP 130 165.1 6.50
IRM 320AL Male 910-022 44 65 44.5 1.75 EXP 170 106 4.18
IRM 320A-1 Male 910-024 63.1 85 56.7 2.23 EXP 200 106 4.18
IRM 325A ZF 12 Bolt Male 910-024 63.1 85 56.7 2.23 202-392 178 7.00
IRM 325 IV Male 910-039 41 55 63.5 2.49 202-467 111 4.38
IRM 325 IV Male 910-040 41 55 63.5 2.49 202-474 50.8 2.00
IRM 325A Volvo 10 Bolt Male 910-024 63.1 85 56.7 2.23 EXP 232 178 7.00
IRM 350A Male 910-024 63.1 85 56.7 2.23 EXP 177 152.4 6.00
IRM 350A Male 910-018 63.1 40 60.7 2.39 EXP 207 125 4.92
W350A Male 910-024 63.1 85 56.7 2.23 202-443 130 5.13
 R & D Marine Steel Half Couplings
Pilot drilled only for finish parallel or taper boring by customer
a

c& d

e g

b f
Part Type of Gearbox Pilot drilled only a b c d e f g
No Customer to finish bore Flange Hole Pitch No of Hole Size Register Length Boss
Diameter Circle Holes Diameter Diameter
202-026 4" BW, PRM 102.0 82.55 10.0 63.5 54.9 57.2
Pilot drilled to 16.5mm diameter 4 M
Hurth 4.00 3.25 0.394 2.50 2.16 2.25
202-027 5" B/W, PRM 127.0 109.95 11.2 63.5 54.9 85.9
Pilot drilled to 19.0mm diameter 4 M
Hurth, Volvo 5.00 4.25 0.44 2.50 2.16 3.38
202-006 5" B/W, PRM 127.0 109.95 11.2 63.5 124.5 85.9
Pilot drilled to 19.0mm diameter 4 M
Hurth, Volvo 5.00 4.25 0.44 2.50 4.90 3.38
202-037 6" PRM 146.0 120.6 12.7 76.2 89.4 92.7
Pilot drilled to 21.0mm diameter 6 M
5.75 4.75 0.50 3.00 3.52 3.65
202-054 6" PRM 146.0 120.6 12.7 76.2 149.0 92.7
Pilot drilled to 21.0mm diameter 6 M
5.75 4.75 0.50 3.00 5.87 3.65
202-120 6" Twin Disc 146.0 120.6 19.0 76.2 152.4 92.7
Pilot drilled to 21.0mm diameter 6 F
5.75 4.75 0.63 3.00 6.00 3.65

R & D Marine Bobbins

R & D Marine can provide a Bobbin to extend the shaft. If the gearbox fitting you require is not listed, please
contact R & D Marine a
g

c& d

e e

b f

Part Type of Gearbox Bobbin Dimensions

No a b c d e f g
Flange Hole Pitch No of Hole Register Length Neck
Diameter Circle Holes Size Diameter Diameter
4" BW, PRM 102.0 82.55 10.0 63.5 87.4 57.2
202-169 4 M/F
Hurth 4.00 3.25 0.394 2.50 3.44 2.25
5" BW, PRM 127.0 109.95 11.2 63.5 124.5 85.9
202-251 4 M/F
Hurth,Volvo 5.00 4.25 0.44 2.50 4.90 3.38
6" PRM 146.0 120.6 12.7 76.2 148.9 92.7
202-250 6 M/F
5.75 4.75 0.50 3.00 5.86 3.65
1
7 ⁄4" Twin Disc 184.2 152.4 19.0 95.25 152.4 108.0
Exp 225 6 M/F
7.25 6.00 0.75 3.75 6.00 4.25
Units of measurement: Black Millimetres Red Inches

Meadow Works
Contact Us By:
Clothall Road
Tel: +44 (0)1462 892391
Baldock
Fax: +44 (0)1462 896448
Hertfordshire
Web Site: www.randdmarine.com
England
E mail: [email protected]
SG7 6PD
06/09