Scribd
Upload
20 views1 page

Sheep Pen

This document summarizes the lighting design for a sheep pen room that is 5.5 meters high. It provides lighting calculations including the average, minimum, and maximum lux levels on the workplane, floor, and ceiling. It also lists the wall lux levels and illuminance quotient. Finally, it includes a luminaire parts list with 36 Philips light fixtures that use 2 36-watt lamps each for a total power of 0 watts.

Uploaded by

Abdul Rafae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views1 page

Sheep Pen

This document summarizes the lighting design for a sheep pen room that is 5.5 meters high. It provides lighting calculations including the average, minimum, and maximum lux levels on the workplane, floor, and ceiling. It also lists the wall lux levels and illuminance quotient. Finally, it includes a luminaire parts list with 36 Philips light fixtures that use 2 36-watt lamps each for a total power of 0 watts.

Uploaded by

Abdul Rafae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project 1

05.11.2015

Operator
Telephone
Fax
e-Mail

Sheep Pen / Summary

Height of Room: 5.500 m, Mounting Height: 5.100 m, Light loss factor: Values in Lux, Scale 1:557
0.80

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 109 33 141 0.300
Floor 20 101 34 126 0.337
Ceiling 80 33 7.21 77 0.221
Walls (4) 0 69 23 141 /

Workplane:
Height: 0.760 m
Grid: 128 x 32 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.646, Ceiling / Working Plane: 0.299.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
1 36 PHILIPS TCW097 2xTL-D36W EBS (1.000) 4623 6700 0.0
Total: 166428 Total: 241200 0.0

Specific connected load: 0.00 W/m² = 0.00 W/m²/ lx (Ground area: 753.67 m²)

Page 1

You might also like