0% found this document useful (0 votes)
77 views

Application Form For Height Clearance Rev 032013

This document outlines the requirements for applying for a height clearance permit from the Civil Aviation Authority of the Philippines. Applicants must submit: 1) An elevation plan of the proposed structure and certification from a geodetic engineer providing the structure's coordinates, elevation, and distance from runways. 2) A filing fee of 50 pesos. The application requests details about the applicant and requires consistency between the application and attached documents. Compliance with these requirements is necessary to avoid delays in processing the permit.

Uploaded by

Lester Lazo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
77 views

Application Form For Height Clearance Rev 032013

This document outlines the requirements for applying for a height clearance permit from the Civil Aviation Authority of the Philippines. Applicants must submit: 1) An elevation plan of the proposed structure and certification from a geodetic engineer providing the structure's coordinates, elevation, and distance from runways. 2) A filing fee of 50 pesos. The application requests details about the applicant and requires consistency between the application and attached documents. Compliance with these requirements is necessary to avoid delays in processing the permit.

Uploaded by

Lester Lazo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Republic of the Philippines

DEPARTMENT OF TRANSPORTATION AND COMMUNICATIONS


CIVIL AVIATION AUTHORITY OF THE PHILIPPINES
MIA Road, Pasay City 1300
Website address: caap.gov.ph

APPLICATION FORM FOR HEIGHT CLEARANCE PERMIT

REQUIREMENTS: [Preferred to be initially read by the Geodetic Engineer. Any discrepancy in complying these requirements may delay processing.]

1. ELEVATION PLAN OF THE PROPOSED STRUCTURE

(Note: If in case, the proposed structure is to be installed/constructed atop of an existing structure, (include the height
of the existing structure).

2. CERTIFICATION OF GEODETIC ENGINEER [separate sheet - original copy with dry seal]

a. Geodetic Coordinates (WGS-84 Datum) and True Ground Elevation in meters above mean sea level / Orthometric Height
of the site (point/s of the proposed structure nearest to the runway). If the data is from the GPS, the height will be referred
with the application of the EGM2008 geoid model.

b. Copy of Reference Elevation – AMSL / Orthometric Height from known control station of Bureau of Coast and Geodetic
Survey (BCGS) / National Mapping and Resource Information Authority (NAMRIA).

c. Copy of Horizontal Control Reference using WGS-84 Coordinates - Latitude/Longitude from known control station of
BCGS/NAMRIA.

d. Location Plan with Vicinity Map, indicating the Geodetic Position and Elevation of the proposed site, signed and sealed
by a Geodetic Engineer.

e. Copy of the original field notes, traverse computations and GPS processing notes including raw data (total station data
should be in ASCI format and RINEX format in GPS), signed and sealed by a Geodetic Engineer.

In addition, if the proposed site is within the two (2)-km radius of the nearest runway end, indicate the true ground elevation at
the nearest point of the runway and the distances, as shown in the illustrations below:

Illustration:
S
I
T
E
S
I
T
E

e e
c c
e

n
c

n a
n

a t
a

s
t

t
s

s i
i

i D
D
R
u
n
w
a
y
e
n
d

D .
. p
r
p
r e
R
u
n
w
a
y

R
u
n
w
a
y
c
e
n
t
e
r
l
i
n
e
R
u
n
w
a
y

e P
E
x
t
e
n
d
e
d
R
u
n
w
a
y
c
e
n
t
e
r
l
i
n
e

3. FILING FEE OF FIFTY PESOS (P50.00)

[Note: Attach a copy of the Official Receipt or Order of Payment.]

(Please fill –up completely, legibly, and correctly. Data below must be consistent with attached documents.)
DATA OF APPLICANT/OWNER:
Name SUNTRUST HOME DEVELOPER
Mailing Address (Business) Newport Boulevard, Newport City, Villamor Pasay City
(Residence)

Telephone/Fax Numbers (Manila) (Provincial) Metro Manila

DATA OF PROPOSED STRUCTURE / SITE :


Type of Structure Commercial building
Address Bay Boulevard, Bagong Bantay Paranaque City
Proposed Height 68.14 meters above ground level
(Note: If the proposed structure is to be installed/constructed atop of existing structure)
meters above ground level
Height of Existing Structure
If within 2-km radius of nearest runway end:
Distance (site to nearest runway end) kilometers or meters
Perpendicular Distance (site to runway centerline/extended runway centerline) 1763.20 kilometers or meters

Geodetic Coordinates LATITUDE 14°31'19.88011''


Reference Datum (WGS-84 Datum) LONGITUDE 120°59'9.16711''
True Ground Elevation 4.780 meters above mean sea level

Note: to be filled-up by the person who accomplished this form, NOT to be used as Certification of Geodetic Engineer.
Printed Name BENJIE FABROA Signature

Office/Residence Address NO. 20N DOMINGO 87. VALENCIA, QC


Telephone/Fax Numbers (Manila) 09178952326 (Provincial)

Date of Submission
Official Receipt Number & Date

revised hcp 032013

You might also like