100% found this document useful (3 votes)
17K views

Command List For Gps Tracker: Function Command Format Reply Concel Example Note

This document provides a list of commands and functions for a GPS tracker device. It includes commands to set the admin number, restart the device, change the password, set the sleep mode, configure the APN settings, set the domain, select GPRS or tracking mode, set the upload frequency, check parameters and device status, arm and disarm the device, and set alarms for vibrations, sensitivity and speed. Most commands require the correct password and parameters to execute the corresponding function.

Uploaded by

Julio Muñoz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (3 votes)
17K views

Command List For Gps Tracker: Function Command Format Reply Concel Example Note

This document provides a list of commands and functions for a GPS tracker device. It includes commands to set the admin number, restart the device, change the password, set the sleep mode, configure the APN settings, set the domain, select GPRS or tracking mode, set the upload frequency, check parameters and device status, arm and disarm the device, and set alarms for vibrations, sensitivity and speed. Most commands require the correct password and parameters to execute the corresponding function.

Uploaded by

Julio Muñoz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Command list for gps tracker

Function Command format Reply Concel Example Note


admin123456+space+phone noadmin123456+space+p
Admin number admin ok admin123456 186******** no need to enter “+”
number hone
back to factory begin123456 begin ok begin123456
After receiving this instruction and replying to the SMS, the device
restart rst
will automatically restart immediately.
password+old
password password ok password123456 654321
password+space+new password
time sleep The device goes to sleep automatically without any operation for five
sleep123456 time sleep time ok
mode minutes, and the device can be woken up by restarting ,SMS and call.
shock sleep The device goes to sleep automatically without any operation for five
sleep123456 shock sleep shock ok
mode minutes, and the device can be woken up by restarting ,SMS and call.
no sleep sleep123456 off sleep off ok
apn+123456+apn content apn ok apn123456 cmnet
APN apnuser+123456+space+content apnuser ok
apnpasswd+123456+space+content apnpasswd ok
adminip+123456+space+ip+space+
adminip ok
port
IP&Port
SZCS,123456,DOMAIN=113.98.254.
OK! Domain=113.98.254.179:7700
179:7700
SZCS,123456,DOMAIN=d.gpscj.com
Domain OK! Domain=d.gpscj.com 7700
7700
GPRS gprs123456 gprs ok nogprs
In sports mode, the upload frequency is 10-180s;
upload upload123456+space+time upload ok upload123456 15 in static mode, the frequency cannot be set, and the frequency is
frequency fixed for 3 minutes
run,time
timezone timezone+123456+space+GMT No. timezone ok timezone123456 -4 no "+"
software version,ID, IP,port number.
param1
Domain,APN
admin number,SOS
number,Displacement distance,
param2 overspeed, automatic defense time,
disarm time, alarm time interval
Parameter
query Software version: CJCAR_2020/05/22 15:53,
ID number:780XXXXX;
Software version, device's ID, IP, port, IP and port :113.98.254.178:7700
(s42,1234) domain name, APN, GSM signal, GPS APN: imovil.entelpcs.cl;
satellite number S12: GSM signal strenth;
S00B00A1: GPS satelite number and Beidou satelite number;
F0330P1: no explaination.

Battery:6---full battery, if show2, need to charge;


GPRS:1---GPRS is ok; if shows 0, it's abnormal;
Battery:6 GPRS:
GSM: GSM Signal strength, The larger for the number, the stronger
Normal(1)/Abnormal(0); GSM:
for the signal. 6 is the strongest. 1 is the weakest;
Strong/Good/Normal/Poor GPS: A/V
device status status GPS: 1--gps is normal; 0--gps is abnormal;
ACC: On/Off Oil and Power: On/Off
ACC: 0--ACC disconnected; 1--ACC connected;
External power supply: Normal/Off
Oil: 0--power cut 0ff; 1--power on;
Power: external battery, 1-connect, 0--disconnect;
S: arm status, 1--arm; 0--disarm
Arm 111 or SF
Disarm 000 or CF
Cut off power 555 cut oil ok
Oil Resume 666 resume oil ok
Power failure
pwr1 pwr0 Alarm method: phone plus SMS
alarm
vibx,y x=1-3,1-SMS;2--Call; 3--SMS before call;y=1-9,1 the most sensitive
Vibration
vibcall+123456 vibrate phone alarm set ok novibcall+123456 vibcall123456
alarm
vibalm+123456 vibrator sms alarm set ok novibalm+123456 vibalm123456
t means time,Generally, set it to 0 directly, and xyz is the change of
Sensitivity vibxyz123456,t,x,y,z the three-axis,
1,1,1 is most sensitive; 9,9,9 is the least sensitive;
Speed alarm speed+123456+space+080(km/h) speed ok nospeed+123456 speed123456 080

IMEI checking imei+123456


The device is only in positioning mode, dial the SIM card, and reply to
tracking mode tracker123456 tracker ok
the geographic location by SMS after hanging up
The device is in monitoring mode, and the sound around the device
Monitoring monitor123456 monitor ok can be heard after being connected;
The listening radius is about 5 meters, the closer the better
ACC automatic
auto1 default is closed. Can be opened by APP command.
arm on
ACC automatic
auto0
arm off
ACC Automatic
acclt,120 second,armed after 120 seconds 5-1200s
arm time
ACCModificati
on of accrt,30 second,disarm after 30 seconds 5-1200s
disarming time
A=0, Turn off ACC on and off SMS reminder
A=1, ACC on reminder;
ACC status
accrep123456,A
reminder
A=2, ACC off reminder;
A=3, ACC on and off reminder
Only used for 730, 780-4PIN, 790 series;
Towing vehicle
tow1: Ranges is 1-4. 1-- SMS alarm, 2--phone alarm, 3--SMS + phone
displacement tow1,300 tow0
alarm, 4---server alarm;
alarm
300 is distance(unit:meter)
This mode is only for 220,230,280;
Fast mode: M=1, T, 30-120, unit second, no T parameter, default 30
seconds
Battery-
Roll call mode: M=2, T=0, T parameter can be ignored, such as
powered
WKMD,M,T WKMD,4,24 WKMD, 2
device working
Sports upload: M=3, T, 10 to 1440, in minutes, no T parameter,
mode
default 10 minutes
Timed upload: M=4, T, 1 to 24, unit hour, no T parameter, default 24
hours
4G IP ip and domain name instructions combined into one(only for 4G
adminip123456 d.gpscj.com:7700
command devices)
4G APN apn command does not need 123456, write parameters directly, user
APN,apn,apnuser,apnpsd
command name and password can be set at the same time(only for 4G devices)

You might also like