ORGANISATIONAL MANAGEMENT AND ENTERPRENEURSHIP

(15EC51T)

UNIT 1
1 Write a note on inter-personal skills. 5M-Apr-2018
2 List the functions of management and explain them. 10M-Apr-2018
3 List the benefits of SWOT-analysis. 5M-Nov-2017
4 a) Compare Team and Group. 10M-Nov-2017
b) Analyze the importance of knowing yourself.
5 Define management. List the function of management. 5-Nov/Dec 2018
6 (a) Explain the barriers of communication. 10-Nov/Dec 2018
(b) Illustrate different styles of leadership.
UNIT 2
1 Explain the methods of purchasing. 5M-Apr-2018
2 Explain stores management system. 10M-Apr-2018
3 Illustrate the types of production with their characteristics. 10M-Apr-2018
4 Explain MRP and ERP. 10M-Apr-2018
5 Define MRP and ERP. 5M-Nov-2017
6 Classify and explain production process. 10M-Nov-2017
7 Explain break-even analysis with breakeven chart. 10M-Nov-2017
8 Illustrate the various inventory control techniques. 10M-Nov-2017
9 List the stages involved in product design. 5M-Nov/Dec 2018
10 Explain the factors to improve productivity. 10M-Nov/Dec 2018
11 Explain Henry Fayol’s principle of management. 10M-Nov/Dec 2018
12 How six lines of Attack method improves productivity? 10M-Nov/Dec 2018
UNIT 3
1 Explain Pareto chart of TQM. 5M-Apr-2018
2 Describe the benefits of TPM. 5M-Apr-2018
3 Describe flow chart and control of TQM. 10M-Apr-2018
4 Write the procedures to attain ISO registration. 10M-Apr-2018
5 List the types of TQM tools. 5M-Nov-2017
6 Explain ISO 9000 series quality standards. 5M-Nov-2017
5M-Nov/Dec 2018
7 Describe flow chart and pareto chart of TQM with neat diagrams. 10M-Nov-2017
8 Illustrate the different types of inspections. 10M-Nov-2017
9 Write a note on inventory management. 5M-Nov/Dec 2018
10 Describe Histogram and Pareto chart of TQM. 10M-Nov/Dec 2018
11 Write the advantages of quality control. 10M-Nov/Dec 2018
UNIT 4
1 Explain indirect losses duties to accident. 5M-Apr-2018
5M-Nov/Dec 2018
2 Mention the duties of safety inspector. 5M-Apr-2018
5M-Nov/Dec 2018
3 Illustrate the general safety rules. 10M-Apr-2018
10M-Nov/Dec 2018

Department of Electronics and Communication engg. Jain polytechnic Belagavi

 ORGANISATIONAL MANAGEMENT AND ENTERPRENEURSHIP
(15EC51T)

4 Mention the duties of safety supervisor. 5M-Nov-2017

5 Explain the indirect losses due to accident. 5M-Nov-2017
6 Describe the types of fire extinguishers. 10M-Nov-2017
UNIT 5
1 Explain project planning. 5M-Apr-2018
2 Write scope and role of small scale industries 5M-Apr-2018
3 Explain the factors which influence to start an enterprise. 10M-Apr-2018
4 Explain the sources of finance to start an enterprise. 10M-Apr-2018
5 Define entrepreneur and entrepreneurship. 5M-Nov-2017
6 Summarize the factors that influence entrepreneurship. 5M-Nov-2017
7 Explain the sources of finance to start an enterprise. 10M-Nov-2017
8 Write a note on market survey and market risks. 10M-Nov-2017
9 List the qualities of an Entrepreneur. 5-Nov/Dec 2018
10 Summarize the factors that influence entrepreneurship 5M-Nov/Dec 2018
11 Explain the aspects for a successful entrepreneurship 10M-Nov/Dec 2018
12 Illustrate various factors that influence Entrepreneurship and 10M-Nov/Dec 2018
Entrepreneur motivation.
UNIT 6
1 Write the different areas of employment opportunities. 5M-Apr-2018
2 Explain the sources of recruitment. 10M-Apr-2018
3 Mention the important causes for unemployment. 5M-Nov-2017
4 a) Write and explain the different employment opportunities in India. 10M-Nov-2017
b) Express the steps/process in selection.
5 Mention the different methods of Psychometric tests. 5M-Nov/Dec 2018
6 (a) Write the employment opportunities in different areas. 10M-Nov/Dec 2018
(b) Express the Application process.

Department of Electronics and Communication engg. Jain polytechnic Belagavi

 ARM CONTROLLER [15EC52T ]

Unit - 1
1 List the applications of ARM processor. 5M Dec-2017
2 (a)Explain ARM CORE data flow model. 10M Dec-2017
(b) Justify the feature that improves code density.
3 (a)Explain bit structure of CPSR. 10M Dec-2017
(b) Justify how ARM is suitable for mobile applications.
4 List the special features of ARM processor design. 5M Apr/May-2018
5 a) Explain three stages pipelining of ARM 7 with 10M Apr/May-2018
examples.
b) Discuss mode bits of CPSR registers.
6 Explain ARM core data flow model with neat diagram. 10M Apr/May-2018
7 List any five features of ARM design philosophy. 05 Nov/Dec 2018
8 Sketch the block diagram of data flow model and explain 10 Nov/Dec 2018
9 Explain the bit structure of CPSR. 10 Nov/Dec 2018

Unit-2
1 Explain Barrel shifter with a neat sketch. 5M Dec-2017
2 (a) Explain MVN, MRS and MSR instruction with example. 10M Dec-2017
(b) Distinguish between post and pre indexed addressing
mode with an example
3 (a) Test whether the following instructions are pre or post 10M Dec-2017
index addressing mode : (i) STR R6, [R4, #4] (ii) LDR R3,
[R12], #6 (iii) LDRB R4, [R3, R2] (iv) LDR R6, [R0, R1,
ROR # 6] (v) STR R3, [R0, R5, LSL # 3]
(b) Calculate the effective address of the following
instructions if Register R3 -0 x 4000 & register R4 = 0 x 20.
(i) STRH R9, [R3, R4] (ii) LDRB R8, [R3, R4, LSL #3] (iii)
LDR R7, [R3], R4 (iv) STRB R6. [R3], R4. ASR
#2 (v): LDR R0. [R3,- R4,lsl #3]
4 Explain AND & EOR instructions with examples. 5M Apr/May-2018
5 a) Explain five different shift operations that can used 10M Apr/May-2018
with barrel shifters.
b) Write the instruction to perform the following
operations:
(i) Add number 256 to R1,place the sum in
register R2.
(ii) Place a 2’s complement of -1 into register R3.
(iii) AND ing, R1 content with the complement of
256, place the result in register R2.
(iv) To returning from subroutine.
(v) Copy a complement of 4 into R1.
6 Explain MRS instruction. 5 Nov/Dec 2018
7 Implement Multiple Load concept using LDMIA. 10 Nov/Dec 2018
8 (a) Explain BL instruction. 10 Nov/Dec 2018
(b) Explain SWAP Instruction.

Question Bank – Unit Wise

Department of Electronics & Communication Engineering, Jain Polytechnic Belagavi
 ARM CONTROLLER [15EC52T ]

Unit-3
1 Describe the following directives: EQU, SPACE, ALIGN, 5M Dec-2017
DCD, DCW. Nov/Dec 2018
2 Explain ARM-THUMB networking using BLX instruction. 5M Dec-2017
3 (a) Compare ARM and THUMB instructions. 10M Dec-2017
(b) Write an ALP to find largest number in an array. Nov/Dec 2018
4 Describe the function of ENTRY, AREA and SPACE 5M Apr/May-2018
assembler directives.
5 Explain register usage in thumb. 5M Apr/May-2018
6 a) Predict the operation performed by the execution of 10M Apr/May-2018
each compare instruction.
b) Distinguish between post and pre indexed addressing
modes with an examples.
7 a) Compare ARM and thumb instructions. 10M Apr/May-2018
b) Write an ALP to find length of a null terminated
string.
8 Discuss the interworking of ARM and THUMB. 10 Nov/Dec 2018
Unit-4
1 Write code for disabling IRQ and FIQ interrupts. 5M Dec-2017
2 Write code for disabling IRQ and FIQ interrupts. 5M Dec-2017
3 (b)Explain non-nested interrupt handler with a neat sketch. 10M Dec-2017
(b) List the interrupt handling schemes.
4 Write a note on exception priorities. 5M Apr/May-2018
5 Define the term interrupt latency and list the methods to 5M Apr/May-2018
minimize latency.
6 a) Differentiate between interrupts and exceptions. 10M Apr/May-2018
b) Explain vector tables.
7 Explain Exception handling schemes. 5M Nov/Dec 2018
8 Discuss Interrupt Latency. 5M Nov/Dec 2018
9 Explain the nested interrupt handler with a neat sketch. 10M Nov/Dec 2018
Unit-5
1 List any five features of RTC. 5M Dec-2017
3 Name any five features of I2c. 5M Dec-2017
4 Sketch a memory map of LPC 2148. 10M Dec-2017
5 List any five features of LPC2148. 5M Apr/May-2018
Nov/Dec 2018
6 Discuss RESET and wake up timers. 5M Apr/May-2018
7 a) Explain the importance of brownout detector. 10M Apr/May-2018
b) Explain power modes supported by LPC2148.
8 List features of USB 5M Nov/Dec 2018
9 Sketch the block diagram of LPC 2148. 10M Nov/Dec 2018
Unit-6
1 Explain the bit structure of PLL STAT register. 5M Dec-2017

Question Bank – Unit Wise

Department of Electronics & Communication Engineering, Jain Polytechnic Belagavi
 ARM CONTROLLER [15EC52T ]

2 Calculate the values of PLL configuration register (PLLCFG) 10M Dec-2017

for the following frequency specification CCLK = 60 MHz,
PCLK = l5 MHz. PCLK is l56 MHz to 320 MHz, FOSC = 10
MHz.
b)List any four features of Timer in LPC2148.
3 (a) Write C program to interface LEDS to all pins in port 0 10M Dec-2017
(P0.0 to P0.l5) make repeatedly blink all LEDs high then
low, then high and so on (Introduce some delay).

(b) List any four applications of GPIO.

4 Sketch a neat block diagram of TIMER. 2 10M Dec-2017
(b) List the Legacy GPIO registers.
5 a) Name the applications of timers 5M Apr/May-2018
b) Write embedded C statement to configure:
(i) Pin 19 of port 0 as output and want to drive it
high (logic 1)
(ii) Configuring first 16 pins of port 0 (P0.0 to
P0.15) has outputs and settings them high.
6 a) Sketch a neat block diagram of PLL. 10M Apr/May-2018
b) Write a procedure for PLL frequency calculation
7 a) List any five features of GPIO. 10M Apr/May-2018
b) Choosing FOSE=10MHz and CCLK=60Hz
configure PLLO.
8 a) List any five features of timer in LPC2148. 10M Apr/May-2018
b) Explain pin connect block of LPC.2148 5M Nov/Dec 2018
9 Explain procedure and with example PLL frequency 10M Nov/Dec 2018
calculation.
10 Discuss GPIO and its Registers. 10M Nov/Dec 2018
11 Explain the architecture of TIMER module of LPC 2148. 10M Nov/Dec 2018

Question Bank – Unit Wise

Department of Electronics & Communication Engineering, Jain Polytechnic Belagavi
 ADVANCED COMMUNICATION [15EC53T ]

Unit - 1
1 Define waveguide. List the types of waveguides. 5M Apr-2018
2 Explain construction and working, of two cavity klystron. 10M Apr-2018
3 Explain the construction and working of an lMPATT diode. 10M Apr-2018
4 List the applications of microwave signal. 5M Dec-2017

5 Explain the construction, working and application of 10M Dec-2017

magnetron.
6 Sketch the construction of a TWT and explain its working. 10M Dec-2017
Unit-2
1 Define average power and peak power. 5M Apr-2018
2 Compare A-scope and PPI displays. 5M Apr-2018
3 Explain the working of FM-CW Radar. 10M Apr-2018
4 Sketch the block diagram of MTI Radar & explain its 10M Apr-2018
working.
5 Explain the factors that influence Rader range. 5M Dec-2017
6 Compare A-scope and PH display. 5M Dec-2017
7 Derive the radar range equation. 10M Dec-2017
8 Illustrate the working of ILS method of aircraft landing 10M Dec-2017
system.
Unit-3
1 Explain apogee and perigee heights With a neat sketch. 5M Apr-2018
2 Explain LEO, MEO and GEO satellite. 10M Apr-2018
3 Define satellite and explain the satellite orbits. 5M Dec-2017
4 (a) Define LEO, MEO & GEO. 10M Dec-2017

(b) Explain apogee and perigee heights with a neat sketch.

Unit-4
1 Define transponders and list the types of satellite 5M Apr-2018
transponders.
2 (a) Explain methods of increasing the channel capacity of a 10M Apr-2018
satellite.
(b) Explain power sub-system of a satellite.
3 With a block diagram. explain satellite communication 5M Dec-2017
system.
4 (a) List the different types of satellite-subsystems. 10M Dec-2017

(b) Explain single conversion transponder with a neat sketch.

Unit-5
1 List the remote sensing applications of satellite. 5M Apr-2018

2 Explain VSAT. 5M Apr-2018

3 Explain DTH system with neat figure. 10M Apr-2018
4 List the satellite applications for different areas. 5M Dec-2017
5 Explain the earth observation application of satellite. 5M Dec-2017

Question Bank – Unit Wise

Department of Electronics & Communication Engineering, Jain Polytechnic Belagavi
 ADVANCED COMMUNICATION [15EC53T ]

6 Explain GPS system with a neat sketch. 10M Dec-2017

Unit-6
1 List the Zigbee network topologies. 5M Apr-2018
2 Explain 1G and 2G mobile systems. 5M Apr-2018
3 Explain the operation of GSM architecture with neat sketch. 10M Apr-2018
4 Explain the features of Wi-Fi & Hot Spot technologies. 10M Apr-2018
5 (a) Explain the applications of zigbee. 10M Apr-2018
(b) Illustrate the cell-splitting and cell selloring.
6 Explain HandolT strategies. 5M Dec-2017

7 Write the importance of cell-splitting and cell-sectarian in 5M Dec-2017

mobile networks.

8 (a) Define mobile communication and list the generations of 10M Dec-2017
mobilecommunications.

(b) List the features of GSM system.

9 Explain the network topologies and applications of ZIGBEE. 10M Dec-2017
10 Explain the features of Wi-Fi and Hot-Spot technology. 10M Dec-2017

Question Bank – Unit Wise

Department of Electronics & Communication Engineering, Jain Polytechnic Belagavi
 APPLICATIONS OF ELECTRONICS AND ENGINEERING [15EC54T ]

Unit - 1
1 Write short notes on Xerox Machine. 5 Nov/Dec 2017
2 Write about working principle of Microwave cooking and 10 Nov/Dec 2017
write the block diagram of Microwave oven.
3 What in a calculator? With a neat diagram explain Internal 10 Nov/Dec 2017
organization of a Calculator.
4 Write a note on Refrigeration. 5 Nov/Dec 2018
5 Explain the working principle of washing machine. 10 Nov/Dec 2018
6 With a example explain how calculator works and with a neat 10 Nov/Dec 2018
diagram explain internal organization of a calculator.
Unit-2
1 Explain Electronic ignition lock system. 5 Nov/Dec 2017
2 Explain the following : 10 Nov/Dec 2017
(a) ABS (b) Solar automobiles.
3 With block diagram explain vehicle proximity detection 10 Nov/Dec 2017
system.
4 List the needs of electronics in automobile. 5 Nov/Dec 2018
5 Explain: 10 Nov/Dec 2018
(a) Electronic ignition
(b) Ultrasonic car safety belt system
6 Analyse the block diagram of vehicle navigation. 10 Nov/Dec 2018
Unit-3
1 List different types of Microphones headphones and Loud 5 Nov/Dec 2017
Speakers.
2 Explain the operation of any one headphone with neat figure. 5 Nov/Dec 2017
3 With relative diagram explain any two microphones. 10 Nov/Dec 2017
4 Mention the features of microphone. 5 Nov/Dec 2018
5 Explain the operation of any one microphone with neat 5 Nov/Dec 2018
diagram .
6 (a) Explain how basic loudspeaker work. 10 Nov/Dec 2018
(b) Compare basic loudspeaker and crystal loudspeaker.
Unit-4
1 List image/ video capturing and displaying electronic 5 Nov/Dec 2017
devices.
2 Write a note on Smart TV. 5 Nov/Dec 2017
3 (a) Draw the block diagram of Color TV Receiver. 10 Nov/Dec 2017
(b) Mention the features of digital camera.
4 Compare LED, LCD, HDTV. 5 Nov/Dec 2018
5 Write a note on smart TV. 5 Nov/Dec 2018
6 With neat block diagram explain working of colour TV 10 Nov/Dec 2018
transmitter.
Unit-5
1 Mention atleast five electronic Musical Instruments. 5 Nov/Dec 2017
2 Mention the applications of virtual reality. 5 Nov/Dec 2017

Question Bank – Unit Wise

Department of Electronics & Communication Engineering, Jain Polytechnic Belagavi
 APPLICATIONS OF ELECTRONICS AND ENGINEERING [15EC54T ]

3 (a)Write a note on electronic guitar. 10 Nov/Dec 2017

(b) Write a short note on video gaming system.
4 Explain the features of Video gaming systems. 5 Nov/Dec 2018
5 Explain the working of LCD projector. 5 Nov/Dec 2018
6 (a) Explain the concept of Interactive video system. 10 Nov/Dec 2018
(b) Write a short note on video gaming system.
Unit-6
1 Define robotics and list applications of robotics. 5 Nov/Dec 2017
2 Analyze the non-servo control system and servo control 10 Nov/Dec 2017
system in robotic application]
3 (a) Explain degrees of freedom. 10 Nov/Dec 2017

(b) List advantages and disadvantages of Robot

4 (a) Define Sensors. Classify different Robotic sensors. 10 Nov/Dec 2017

(b) Define Actuators. Explain electrical actuators.

5 List the qualities of robot. 5 Nov/Dec 2018
6 (a) Explain working of pick and place robot. 10 Nov/Dec 2018
(b) Write a note drive system.

7 (a) List the advantages and disadvantages of robot. 10 Nov/Dec 2018

(b) Briefly explain robotic vision system.

8 Analyse the non-servo control system and servo control 10 Nov/Dec 2018
system in robotic application.

Question Bank – Unit Wise

Department of Electronics & Communication Engineering, Jain Polytechnic Belagavi