Scribd
Upload
3K views

Deck Sheet

The document contains deck sheet design calculations. It provides properties of the deck sheet including thickness, grade, area, and moments of inertia. It also lists applied loads including dead load, construction load, and total load. Bending moments and allowable bending capacities are calculated at mid-span and support locations for 3 spans. Deflections are also calculated and checked against allowable limits. The calculations are repeated for a modified deck sheet with different properties and loadings.

Uploaded by

maheshbandham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
3K views

Deck Sheet

The document contains deck sheet design calculations. It provides properties of the deck sheet including thickness, grade, area, and moments of inertia. It also lists applied loads including dead load, construction load, and total load. Bending moments and allowable bending capacities are calculated at mid-span and support locations for 3 spans. Deflections are also calculated and checked against allowable limits. The calculations are repeated for a modified deck sheet with different properties and loadings.

Uploaded by

maheshbandham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

DECK SHEET DESIGN CALCULATION

Deck sheet Properties


Deck sheet 0.6 mmthk loads
Grade fy 300 Mpa DL 3.18 kN/m2
Area 770 mm2 Construction load 1 kN/m2
Ixe (top) 259500 mm4 Total load (w) 4.18 kN/m2
3
sxe(top) 7470 mm Joist spacing (L) 1.5 m
3
Ixe (bot) 282200 mm
sxe(bot) 8890 mm3

c
c c
a a a a a a

b b b b b b
1-SPAN 2-SPAN 3-SPAN

a - Max. Shear Check b - Max. (+Ve) Moment & Deflection Check c - Max. (-Ve) Moment Moment & Shear Check

3 Span Actual Bending BM - At Mid span (M1) 0.08 wl2 = 0.50 kN-m
Moments BM-At Support (M2) 0.1 wl 2
= 0.63 kN-m

Allowable Bending At Mid span 0.6*fy *Sxe(top) = 1.34 kN-m Hense Safe
Moment At support 0.6*fy *Sxe(bot) = 1.60 kN-m Hense Safe

E 200000 N/mm2
L 1500 mm
I 259500 mm4

Actual Deflection 0.0069 wl4/EI = 2.81 mm


Allowbale Deflection L/240 = 6.25 mm Hense Safe
DECK SHEET DESIGN CALCULATION

Deck sheet Properties


Deck sheet 0.6 mmthk loads
Grade fy 300 Mpa DL 4.075 kN/m2
Area 770 mm2 Construction load 1 kN/m2
Ixe (top) 259500 mm4 Total load (w) 5.075 kN/m2
3
sxe(top) 7470 mm Joist spacing (L) 1.8 m
3
Ixe (bot) 282200 mm
sxe(bot) 8890 mm3

c
c c
a a a a a a

b b b b b b
1-SPAN 2-SPAN 3-SPAN

a - Max. Shear Check b - Max. (+Ve) Moment & Deflection Check c - Max. (-Ve) Moment Moment & Shear Check

3 Span Actual Bending BM - At Mid span (M1) 0.08 wl2 = 0.73 kN-m
Moments BM-At Support (M2) 0.1 wl 2
= 0.91 kN-m

Allowable Bending At Mid span 0.6*fy *Sxe(top) = 1.34 kN-m Hense Safe
Moment At support 0.6*fy *Sxe(bot) = 1.60 kN-m Hense Safe

E 200000 N/mm2
L 1800 mm
I 259500 mm4

Actual Deflection 0.0069 wl4/EI = 7.08 mm


Allowbale Deflection L/240 = 7.5 mm Hense Safe

You might also like