Scribd
Upload
38 views2 pages

Brightness & Color Meter: Modularline

The document describes the ModularLine brightness and color meter, which uses a xenon flash technique and dual-beam spectrophotometer to measure paper, board, and tissue samples. It can simulate daylight and artificial light and measures reflectance from 360-740 nm. The compact device has a touchscreen and automatic stack changer that allows precise, stable, and reliable measurements to calculate color characteristics, brightness, and opacity according to various standards.

Uploaded by

Duong Phạm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views2 pages

Brightness & Color Meter: Modularline

The document describes the ModularLine brightness and color meter, which uses a xenon flash technique and dual-beam spectrophotometer to measure paper, board, and tissue samples. It can simulate daylight and artificial light and measures reflectance from 360-740 nm. The compact device has a touchscreen and automatic stack changer that allows precise, stable, and reliable measurements to calculate color characteristics, brightness, and opacity according to various standards.

Uploaded by

Duong Phạm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ModularLine Article No.

S62300

BRIGHTNESS & COLOR


METER
For:

 PAPER

 BOARD

 TISSUE

MOST IMPORTANT BENEFITS


Germany

 Compact device with built-in industrial PC FRANK-PTI GMBH


Auf der Aue 1
69488 Birkenau
 Two-beam spectrophotometer with touchscreen Tel.: +49 6201 84-0
[email protected]

 Spectral range: 360 – 740 nm Austria


PAPER TESTING INSTRUMENTS GMBH

 Sphere with d/0° geometry, pulsed xenon flash lamp Hauptstrasse 41a (at BDZ)
4663 Laakirchen
Tel.: +43 7613 90607-0
 “WinPaper”-Software, especially designed for the paper industry [email protected]

www.frank-pti.com
Article No. S62300

PRODUCT DESCRIPTION TECHNICAL DATA


The ModularLine brightness and color meter uses a xe- DEVICE/INSTRUMENT
non flash technique and a dual beam spectrophotome-
• Easy operation via the integrated touch screen
ter. Depending on the applicable standard, various UV
• Double-Beam spectrophotometer with d/0°-geometry
levels are available, which can simulate daylight and ar-
• Wavelength range: 360 – 740 nm
tificial light. The testing device is extremely precise and
• Wavelength pitch: 10 nm
stable, and very reliable. Different algorithms can be used
• Reflectance range: 0 – 200%, resolution: 0.01%
to produce a multitude of calculations for every measu-
• Light sorce: pulsed xenon lamps
rement carried out, which can be displayed and further
• Measurement area: ø 30 mm
processed if required. The use of an automatic stack
• Measuring with different light sorces without recalibration
changer, in the form of a turn table, emphasises comfort
of use for the test device, not only when it is used as part INSTALLATION REQUIREMENTS
of a ModularLine.
Electrical connection 110 – 230 V, 50/60 Hz
Water connection No

TEST DESCRIPTION Compressed air 400 – 600 kPa

The measuring mechanism of the test device is placed APPLICABLE STANDARDS

on the sample automatically, and the stack selected for • DIN 53145 bis 53147, 54500
measurement is placed in the correct position by the • ISO 2469, 2470, 2471, 3688, 11475, 11476
stack changer. After the measurement, the stack is re- • TAPPI T519, T525, T527
placed by the black standard automatically, and a further
measurement is carried out. The values determined
form the basis for calculating the colour characteristics,
brightness and opacity. The stack changer provides six
positions, that can optionally be equipped with calibrati-
on standards for fully automatic base calibrations and/
or with various sample stacks. With the sample punch,
available as an extra the individual stack holders can be
filled directly, preventing any contamination of the sample
stack by user’s hands.
03.17-1.0

Measuring area Automatic stack changer with six positions

You might also like