MICRO 2 X 16 III

WELDING CONTROLLERS
MICRO 2X16 III

e-mail : [email protected]
http://www.aronet.com
 USER-FRIENDLY INTERFACE
„ COMPREHENSIVE

The integrated front panel delivers :

 fast and easy programming

 permanent control of the welding parameters
 display of error messages in clear text
 dynamic display of I/O’s and equipment status

The front panel key limits the programming access, while an additional password protects the equipment
configuration.
A large choice of languages allows to work in the user’s language.
All the 2x16III timers rely on the same, very simple, programming concept, thus reducing the training costs of
the welding teams.

COMPREHENSIVE AND FLEXIBLE

Whatever the welding application, there is a perfectly adapted Micro 2x16 III timer available :

 robot gun
 manual gun
„ FLEXIBLE

 stationary machine
 custom installation

Special Industry versions distinct from the Automotive versions allow

the daily use of a perfectly sized equipment for the task at hand.
Of course, the embedded software, stored on Eprom or Flash memo-
ry, is upgradeable, so that the equipment is fully evolutive.

ADVANCED FEATURES FOR ALL THE WELDING REQUIREMENTS

„ USER-FRIENDLY

Force monitoring
Program chaining

Electric cascade
Medium Frequency

Pneumatic cascade
3-Phase DC

Seam welding

are just a few examples of the numerous functionalities available.

 AUTOMATION
„ PERFORMANCE

The welding control unit should be

seamlessly integrated into a robot or
automated installation; that’s why our
timers integrate the most common
Fieldbus systems.

In order to optimize the cost and reliability of the controller, these Fieldbuses are directly integrated onto the
electronic boards, without additional box or external interface.

QUALITY ASSURANCE

2 optional software packs can optimize your work and improve the global quality of the installation :
„ QUALITY

ARODMS ) user-friendly off line programming ARONET ) workshop supervision

) back up and archiving ) traceability (parameters/results/defaults)
) data security ) maintenance (diagnostic help)
„ RELIABILITY

Networking with ARONET can be

done on a RS-485 base (simple and

economic) or on Ethernet (more effi-

cient yet standardized)

 RELIABILITY
Tens of thousands of Micro 2x16 III timers are functioning in the
world, proving every day their exceptional reliability, especially
in demanding environments like high-rate Automotive lines.

This
is made possible by :
 robust design methodologies
 a strict selection of components
 a single card concept that reduces the number of
connectors (sources of numerous failures)
 the systematic surpassing of regulatory requirements
concerning EMC
Automotive control with Interbus and Ethernet

FAST DIAGNOSIS AND MAINTENANCE

The immediate display (no pocket to plug or computer

to start) of meaningful default descriptions (in the
user’s language) speeds up maintenance.
Advanced diagnostic functions, accessible only to
maintenance teams, make the most complex problem
solving much easier .

TECHNICAL CARACTERISTICS
Weight 2,5 Kg
Dimensions AC : H 297 x W 182 x D 110
MF : H 297 x W 182 x D 130
Operating temperature 0 - 50°C
Operating humidity 20 - 80%
Front panel/display protection IP 54
Power supply 24 VAC or 24 VDC
(to be specified on order)
Electromagnetic compatibility : According to EN 50081-2 and EN 50082-2
electrical fast transient / burst immunity Level IV
according to IEC - 1000 - 4 - 4
electrostatic discharge immunity Level IV
Micro 2x16 III integrated in a welding according to IEC - 1000 - 4 - 2
cabinet

ARO S.A. Your contact

Réf. Doc ARO Controls: C451-GB - 23/09/2002

1, avenue de Tours
72500 Château-du-Loir
FRANCE
 33 2 43 44 74 00
¬ 33 2 43 44 74 01
http://www.aronet.com
Non contractual document. ARO reserves the right to make changes in these specifications at any time and without notice in order to supply the best possible product. With the issue
of this catalogue any previous data contained in earlier catalogues or data sheets are superseded.