0 SIGN IN

AUTOCAD SHORTCUTS

AUTOCAD KEYBOARD SHORTCUTS

SUBSCRIBE TO AUTOCAD

TRY AUTOCAD NOW

AutoCAD shortcuts & hotkey guide

Work faster and more efficiently by using the AutoCAD shortcuts below. You can find a
downloadable list of shortcuts and commands in the AutoCAD Keyboard Shortcuts PDF.

Software for 2D and 3D CAD. Subscription includes AutoCAD, specialized

Cost-effective
toolsets,
2D CADand
software
apps. for drafting, drawing, and do

SEE MORE SEE MORE

Jump to a section

One-Key Shortcuts  |  Toggles and Screen Management

Hot Keys:  A-C  |  D-F  |  G-I  |  J-L  | M-O  |  P-R  |  S-U  |  V-X  |  Y-Z

One-key shortcuts
Below, you'll find the AutoCAD one-key shortcuts. Click on the image for a larger view.
 0 SIGN IN

AUTOCAD SHORTCUTS

Toggles and screen management

Below, you'll find an abbreviated list of commands that can be used in AutoCAD.

Toggle General Features

Ctrl+G Toggle Grid

Ctrl+E Cycle isometric planes

Ctrl+F Toggle running object snaps

Ctrl+H Toggle Pick Style

Ctrl+Shift+H Toggle Hide pallets

Ctrl+I Toggle Coords

Ctrl+Shift+I Toggle Infer Constraints

Manage Screen

Ctrl+0 (zero) Clean Screen

Ctrl+1 Property Palette

Ctrl+2 Design Center Palette

Ctrl+3 Tool Palette

Ctrl+4 Sheet Set Palette

 Ctrl+6 DBConnect Manager 0 SIGN IN

Ctrl+7 Markup Set Manager Palette

AUTOCAD SHORTCUTS
Ctrl+8 Quick Calc

Ctrl+9 Command Line

Manage Drawings

Ctrl+N New Drawing

Ctrl+S Save drawing

Ctrl+O Open drawing

Ctrl+P Plot dialog box

Ctrl+Tab Switch to next

Ctrl+Shift+Tab Switch to previous drawing

Ctrl+Page Up Switch to previous tab in current drawing

Ctrl+Page Down Switch to next tab in current drawing

Ctrl+Q Exit

Ctrl+Shift+S Save drawing as

Toggle Drawing Modes

F1 Display Help

F2 Toggle text screen

F3 Toggle object snap mode

F4 Toggle 3DOsnap

F5 Toggle Isoplane

F6 Toggle Dynamic UCS

F7 Toggle grid mode

F8 Toggle ortho mode

F9 Toggle snap mode

F10 Toggle polar mode

F11 Toggle object snap tracking

F12 Toggle dynamic input mode
0 SIGN IN

Manage Workflow
AUTOCAD SHORTCUTS

Ctrl+A Select all objects

Ctrl+C Copy object

Ctrl+K Insert hyperlink

Ctrl+X Cut object

Ctrl+V Paste object

Ctrl+Shift+C Copy to clipboard with base point

Ctrl+Shift+V Paste data as block

Ctrl+Z Undo last action

Ctrl+Y Redo last action

Ctrl+[ Cancel current command (or ctrl+\)

ESC Cancel current command

A, B, C
A

A ARC / Creates an arc

ADCENTER / Manages and inserts content such as blocks, xrefs, and

ADC
hatch patterns

AA AREA / Calculates the area and perimeter of objects or of defined areas

AL ALIGN / Aligns objects with other objects in 2D and 3D

AP APPLOAD / Load Application

AR ARRAY / Creates multiple copies of objects in a pattern

ARR ACTRECORD / Starts the Action Recorder

ARM ACTUSERMESSAGE / Inserts a user message into an action macro

ARU ACTUSERINPUT / Pauses for user input in an action macro

ACTSTOP / Stops the Action Recorder and provides the option of saving
ARS
the recorded actions to an action macro file
ATI ATTIPEDIT / Changes the textual content of an attribute within a block
0 SIGN IN

ATT ATTDEF / Redefines a block and updates associated attributes

AUTOCAD SHORTCUTS
ATE ATTEDIT / Changes attribute information in a block

B BLOCK / Creates a block definition from selected objects

BC BCLOSE / Closes the Block Editor

BE BEDIT / Opens the block definition in the Block Editor

HATCH / Fills an enclosed area or selected objects with a hatch pattern,

BH
solid fill, or gradient fill

BO BOUNDARY / Creates a region or a polyline from an enclosed area

BR BREAK / Breaks the selected object between two points

BS BSAVE / Saves the current block definition

BVS BVSTATE / Creates, sets, or deletes a visibility state in a dynamic block

C CIRCLE / Creates a circle

CAMERA / Sets a camera and target location to create and save a 3D

CAM
perspective view of objects

CONSTRAINTBAR / A toolbar-like UI element that displays the available

CBAR
geometric constraints on an object

CH PROPERTIES / Controls properties of existing objects

CHA CHAMFER / Bevels the edges of objects

CHECKSTANDARDS / Checks the current drawing for standards

CHK
violations

CLI COMMANDLINE / Displays the Command Line window

COL COLOR / Sets the color for new objects

CO COPY / Copies objects a specified distance in a specified direction

CT CTABLESTYLE / Sets the name of the current table style

NAVVCUBE / Controls the visibility and display properties of the

CUBE
ViewCube tool

CYL CYLINDER / Creates a 3D solid cylinder

 0 SIGN IN

D, E, F SHORTCUTS
AUTOCAD

D DIMSTYLE / Creates and modifies dimension styles

DAN DIMANGULAR / Creates an angular dimension

DAR DIMARC / Creates an arc length dimension

DIMBASELINE / Creates a linear, angular, or ordinate dimension from

DBA
the baseline of the previous or selected dimension

DBC DBCONNECT / Provides an interface to external database tables

DIMCENTER / Creates the center mark or the centerlines of circles and

DCE
arcs

DIMCONTINUE / Creates a dimension that starts from an extension line

DCO
of a previously created dimension

DIMCONSTRAINT / Applies dimensional constraints to selected objects

DCON
or points on objects

DDA DIMDISASSOCIATE / Removes associativity from selected dimensions

DDI DIMDIAMETER / Creates a diameter dimension for a circle or an arc

DED DIMEDIT / Edits dimension text and extension lines

DI DIST / Measures the distance and angle between two points

DIVIDE / Creates evenly spaced point objects or blocks along the

DIV
length or perimeter of an object

DIMJOGLINE / Adds or removes a jog line on a linear or aligned

DJL
dimension

DJO DIMJOGGED / Creates jogged dimensions for circles and arcs

DL DATALINK / The Data Link dialog box is displayed

DATALINKUPDATE / Updates data to or from an established external

DLU
data link

DO DONUT / Creates a filled circle or a wide ring

DOR DIMORDINATE / Creates ordinate dimensions

DIMOVERRIDE / Controls overrides of system variables used in

DOV
selected dimensions

DR DRAWORDER / Changes the draw order of images and other objects

 DRA DIMRADIUS / Creates a radius dimension for a circle or an arc
0 SIGN IN

DIMREASSOCIATE / Associates or re-associates selected dimensions to

DRE
AUTOCAD SHORTCUTS objects or points on objects

DRAWINGRECOVERY / Displays a list of drawing files that can be

DRM
recovered after a program or system failure

DSETTINGS / Sets grid and snap, polar and object snap tracking, object
DS
snap modes, Dynamic Input, and Quick Properties

DT TEXT / Creates a single-line text object

DVIEW / Defines parallel projection or perspective views by using a

DV
camera and target

DATAEXTRACTION / Extracts drawing data and merges data from an

DX
external source to a data extraction table or external file

E ERASE / Removes objects from a drawing

DDEDIT / Edits single-line text, dimension text, attribute definitions,

ED
and feature control frames

EL ELLIPSE / Creates an ellipse or an elliptical arc

EPDF EXPORTPDF / Exports drawing to PDF

ER EXTERNALREFERENCES / Opens the External References palette

EX EXTEND / Extends objects to meet the edges of other objects

EXIT QUIT / Exits the program

EXP EXPORT / Saves the objects in a drawing to a different file format

EXTRUDE / Extends the dimensions of a 2D object or 3D face into 3D

EXT
space

F FILLET / Rounds and fillets the edges of objects

FILTER / Creates a list of requirements that an object must meet to be

FI
included in a selection set

FSMODE / Creates a selection set of all objects that touch the selected
FS
object

FLATSHOT / Creates a 2D representation of all 3D objects based on the

FSHOT
current view
 0 SIGN IN

G, H, I
AUTOCAD SHORTCUTS
G

G GROUP / Creates and manages saved sets of objects called groups

GEOCONSTRAINT / Applies or persists geometric relationships between

GCON
objects or points on objects

GRADIENT / Fills an enclosed area or selected objects with a gradient

GD
fill

GEOGRAPHICLOCATION / Specifies the geographic location information

GEO
for a drawing file

HATCH / Fills an enclosed area or selected objects with a hatch pattern,

H
solid fill, or gradient fill

HE HATCHEDIT / Modifies an existing hatch or fill

HIDE / Regenerates a 3D wireframe model with hidden lines

HI
suppressed

I INSERT / Inserts a block or drawing into the current drawing

IMAGEADJUST / Controls the image display of the brightness, contrast,

IAD
and fade values of images

IAT IMAGEATTACH / Inserts a reference to an image file

IMAGECLIP / Crops the display of a selected image to a specified

ICL
boundary

ID ID / Displays the UCS coordinate values of a specified location

IM IMAGE / Displays the External References palette

IMP IMPORT / Imports files of different formats into the current drawing

INTERSECT / Creates a 3D solid, surface, or 2D region from overlapping

IN
solids, surfaces, or regions

INTERFERE / Creates a temporary 3D solid from the interferences

INF
between two sets of selected 3D solids

IO INSERTOBJ / Inserts a linked or embedded object

 0 SIGN IN

J, K, L
AUTOCAD SHORTCUTS

J JOIN / Joins similar objects to form a single, unbroken object

JOG DIMJOGGED / Creates jogged dimensions for circles and arcs

L LINE / Creates straight line segments

LA LAYER / Manages layers and layer properties

LAS LAYERSTATE / Saves, restores, and manages named layer states

LE QLEADER / Creates a leader and leader annotation

LENGTHEN / Changes the length of objects and the included angle of

LEN
arcs

MESHSMOOTHLESS / Decreases the level of smoothness for mesh

LESS
objects by one level

LI LIST / Displays property data for selected objects

LO LAYOUT / Creates and modifies drawing layout tabs

LT LINETYPE / Loads, sets, and modifies linetypes

LTSCALE / Changes the scale factor of linetypes for all objects in a

LTS
drawing

LWEIGHT / Sets the current lineweight, lineweight display options, and

LW
lineweight units

M, N, O
M

M MOVE / Moves objects a specified distance in a specified direction

MATCHPROP / Applies the properties of a selected object to other

MA
objects

ME MEASURE / Joins similar objects to form a single, unbroken object

 MEASUREGEOM / Measures the distance, radius, angle,
0 area, and SIGN IN
MEA
volume of selected objects or sequence of points
AUTOCAD SHORTCUTS
MI MIRROR / Creates a mirrored copy of selected objects

ML MLINE / Creates multiple parallel lines

MLA MLEADERALIGN / Aligns and spaces selected multileader objects

MLEADERCOLLECT / Organizes selected multileaders that contain

MLC blocks into rows or columns, and displays the result with a single
leader

MLD MLEADER / Creates a multileader object

MLEADEREDIT / Adds leader lines to, or removes leader lines from, a

MLE
multileader object

MLS MLEADERSTYLE / Creates and modifies multileader styles

MO PROPERTIES / Controls properties of existing objects

MESHSMOOTHMORE / Increases the level of smoothness for mesh

MORE
objects by one level

MS MSPACE / Switches from paper space to a model space viewport

MSM MARKUP / Opens the Markup Set Manager

MT MTEXT / Creates a multiline text object

MV MVIEW / Creates and controls layout viewports

GEOGRAPHICLOCATION / Specifies the geographic location information

NORTH
for a drawing file

NEWSHOT / Creates a named view with motion that is played back

NSHOT
when viewed with ShowMotion

NVIEW NEWVIEW / Creates a named view with no motion

O OFFSET / Creates concentric circles, parallel lines, and parallel curves

SURFOFFSET/ Creates a parallel surface or solid by setting an offset

OFFSETSRF
distance from a surface

OP OPTIONS / Customizes the program settings

ORBIT / 3DO 3DORBIT / Rotates the view in 3D space, but constrained to horizontal
 and vertical orbit only
0 SIGN IN

OS OSNAP / Sets running object snap modes

AUTOCAD SHORTCUTS

P, Q, R
P

P PAN / Adds a parameter with grips to a dynamic block definition

PASTESPEC / Pastes objects from the Clipboard into the current

PA
drawing and controls the format of the data

PARAMETERS / Controls the associative parameters used in the

PAR
drawing

BPARAMETER / Adds a parameter with grips to a dynamic block

PARAM
definition

SURFPATCH / Creates a new surface by fitting a cap over a surface edge

PATCH
that forms a closed loop

POINTCLOUDATTACH / Inserts an indexed point cloud file into the

PCATTACH
current drawing

PE PEDIT / Edits polylines and 3D polygon meshes

PL PLINE / Creates a 2D polyline

PO POINT / Creates a point object

HIDEPALETTES / Hides currently displayed palettes (including the

POFF
command line)

POL POLYGON / Creates an equilateral closed polyline

PON SHOWPALETTES / Restores the display of hidden palettes

PR PROPERTIES / Displays Properties palette

PRE PREVIEW / Displays the drawing as it will be plotted

PRINT PLOT / Plots a drawing to a plotter, printer, or file

PS PSPACE / Switches from a model space viewport to paper space

PSOLID POLYSOLID / Creates a 3D wall-like polysolid

PURGE / Removes unused items, such as block definitions and layers,

PU
from the drawing

PYR PYRAMID / Creates a 3D solid pyramid

Q
0 SIGN IN

QC QUICKCALC / Opens the QuickCalc calculator

AUTOCAD SHORTCUTS
QUICKCUI / Displays the Customize User Interface Editor in a collapsed
QCUI
state

QUICKPROPERTIES / Displays open drawings and layouts in a drawing

QP
in preview images

Q QSAVE / Saves the current drawing

QVDRAWING / Displays open drawings and layouts in a drawing using

QVD
preview images

QVDRAWINGCLOSE / Closes preview images of open drawings and

QVDC
layouts in a drawing

QVLAYOUT / Displays preview images of model space and layouts in a

QVL
drawing

QVLAYOUTCLOSE / Closes preview images of model space and layouts

QVLC
in the current drawing

R REDRAW / Refreshes the display in the current viewport

RA REDRAWALL / Refreshes the display in all viewports

RENDERCROP / Renders a specified rectangular area, called a crop

RC
window, within a viewport

RE REGEN / Regenerates the entire drawing from the current viewport

REA REGENALL / Regenerates the drawing and refreshes all viewports

REC RECTANG / Creates a rectangular polyline

REG REGION / Converts an object that encloses an area into a region object

RENAME / Changes the names assigned to items such as layers and

REN
dimension styles

REVOLVE / Creates a 3D solid or surface by sweeping a 2D object

REV
around an axis

RO ROTATE / Rotates objects around a base point

RENDERPRESETS / Specifies render presets, reusable rendering

RP
parameters, for rendering an image

RENDER / Creates a photorealistic or realistically shaded image of a 3D

RR
solid or surface model
RW RENDERWIN / Displays the Render window without starting a
0 SIGN IN
rendering operation

AUTOCAD SHORTCUTS

S, T, U
S

S STRETCH / Stretches objects crossed by a selection window or polygon

SCALE / Enlarges or reduces selected objects, keeping the proportions

SC
of the object the same after scaling

SCR SCRIPT / Executes a sequence of commands from a script file

SECTION / Uses the intersection of a plane and solids, surfaces, or

SEC
mesh to create a region

SET SETVAR / Lists or changes the values of system variables

SHA SHADEMODE / Starts the VSCURRENT command

SLICE / Creates new 3D solids and surfaces by slicing, or dividing,

SL
existing objects

SN SNAP / Restricts cursor movement to specified intervals

SO SOLID / Creates solid-filled triangles and quadrilaterals

SP SPELL / Checks spelling in a drawing

SPE SPLINEDIT / Edits a spline or spline-fit polyline

SPLINE / Creates a smooth curve that passes through or near specified

SPL
points

SECTIONPLANE / Creates a section object that acts as a cutting plane

SPLANE
through 3D objects

SPLAY SEQUENCEPLAY / Plays named views in one category

SPLIT MESHSPLIT / Splits a mesh face into two faces

SSM SHEETSET / Opens the Sheet Set Manager

ST STYLE / Creates, modifies, or specifies text styles

STANDARDS / Manages the association of standards files with

STA
drawings

SUBTRACT / Combines selected 3D solids, surfaces, or 2D regions by

SU
subtraction
T
0 SIGN IN

T MTEXT / Creates a multiline text object

AUTOCAD SHORTCUTS
TEXTALIGN / Aligns multiple text objects vertically, horizontally, or
TA
obliquely

TB TABLE / Creates an empty table object

TED TEXTEDIT / Edits a dimensional constraint, dimension, or text object

THICKNESS / Sets the default 3D thickness property when creating 2D

TH
geometric objects

TI TILEMODE / Controls whether paper space can be accessed

TOLERANCE / Creates geometric tolerances contained in a feature

TOL
control frame

TOR TORUS / Creates a donut-shaped 3D solid

TP TOOLPALETTES / Opens the Tool Palettes window

TR TRIM / Trims objects to meet the edges of other objects

TS TABLESTYLE / Creates, modifies, or specifies table styles

UC UCSMAN / Manages defined user coordinate systems.

UN UNITS / Controls coordinate and angle display formats and precision.

UNISOLATEOBJECTS / Displays objects previously hidden with the

UNHIDE / UNISOLATE
ISOLATEOBJECTS or HIDEOBJECTS command.

UNI UNION / Unions two solid or two region objects.

V, W, X
V

VIEW / Saves and restores named views, camera views, layout views,
V
and preset views.

VGO VIEWGO / Restores a named view.

VP VPOINT / Sets the 3D viewing direction.

VPLAY VIEWPLAY / Plays the animation associated to a named view.

 VS VSCURRENT / Sets the visual style in the current viewport.
0 SIGN IN

VISUALSTYLES / Creates and modifies visual styles and applies a visual

VSM
AUTOCAD SHORTCUTS style to a viewport.

W WBLOCK / Writes objects or a block to a new drawing file.

WE WEDGE / Creates a 3D solid wedge.

NAVSWHEEL / Displays a wheel that contains a collection of view

WHEEL
navigation tools.

X EXPLODE / Breaks a compound object into its component objects.

XA XATTACH / Inserts a DWG file as an external reference (xref).

XBIND / Binds one or more definitions of named objects in an xref to

XB
the current drawing.

XCLIP / Crops the display of a selected external reference or block

XC
reference to a specified boundary.

XL XLINE / Creates a line of infinite length.

XR XREF / Starts the EXTERNALREFERENCES command.

Y-Z
Y

ZOOM / Increases or decreases the magnification of the view in the

Z
current viewport.

ANALYSISZEBRA / Projects stripes onto a 3D model to analyze surface

ZEBRA
continuity.

ZIP ETRANSMIT / Creates a Self-Extracting or Zipped Transmittal Package.

AUTOCAD
SUBSCRIBE NOW
$210/month
 0 SIGN IN
AUTOCAD
TRY IT NOW
AUTOCAD SHORTCUTS

Free for 30 days

FOLLOW AUTODESK
Facebook
Instagram
Twitter
LinkedIn

All social media

Worldwide sites

PRODUCTS
BUYING
SUPPORT & LEARNING
AUTODESK

Privacy settings | Privacy/Cookies | About our Ads | Legal | Report Noncompliance | Do not sell my personal information | Site map | © 2020 Autodesk Inc. All
rights reserved