Scribd
Upload
267 views2 pages

Design of Reinforced Concrete Beam

This document provides the design details for a reinforced concrete beam, including material properties, beam dimensions, design forces, bar layers, and detailed computations. The beam has a width of 300mm, depth of 500mm, and is designed for a concrete strength of 20.7MPa and rebar yield strengths of 414MPa and 276MPa. Design moments and shear forces were obtained from STAAD analysis. The reinforcement consists of top and bottom layers of bars. Detailed calculations are shown for determining the depth of the neutral axis (d and d') at various sections along the beam.

Uploaded by

Andro Rebuyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
267 views2 pages

Design of Reinforced Concrete Beam

This document provides the design details for a reinforced concrete beam, including material properties, beam dimensions, design forces, bar layers, and detailed computations. The beam has a width of 300mm, depth of 500mm, and is designed for a concrete strength of 20.7MPa and rebar yield strengths of 414MPa and 276MPa. Design moments and shear forces were obtained from STAAD analysis. The reinforcement consists of top and bottom layers of bars. Detailed calculations are shown for determining the depth of the neutral axis (d and d') at various sections along the beam.

Uploaded by

Andro Rebuyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN OF REINFORCED CONCRETE BEAM

ASpectrum Designs Plus Engineering Services Project Title: SAMPLE STRUCTURAL


Address: 8487 Sandoval Avenue, Pinagbuhatan, Pasig City 1602 Project Location: MANILA
Contact: 09982028893 Structural Engineer: Engr. Andro S Rebuyas, RCE, ME-1, RMP, M.Eng-SE
Gmail add: [email protected] Membership: M.PICE, M.ASCE, M.PAMEA, M.FPEA, M.PSUMP, M.NAMPAP, M.SEAD

DATA INPUT

MATERIAL PROPERTIES BEAM DIMENSION

fc' = 20.7 Mpa. Concrete Strength at 28 days b= 300 mm. Beam Width
fy = 414 Mpa. Yield Strength of Longitudinal Bars h= 500 mm. Beam Depth
fyt = 276 Mpa Yield Strength of Stirrups
db = 20 mm. Longitudinal Bar Diameter NUMBER OF TIES
dby = 10 mm. Stirrups Diameter
cc = 40 mm. Concrete Cover Ntv = 2 legs Number of ties (Vertical)
dbt = 10 mm. Torsional Bar Diameter Nth = 2 legs Number of ties (horizontal)

DESIGN FORCES (FROM STAAD RESULT)

@ SUPPORT @ MIDSPAN MINOR AXIS


Mu = 296.18 kN-m 23.02 kN-m 0
Tu = 1.28 kN-m 0.14 kN-m 0.14 kN-m
Vu = 232.18 kN 49.19 kN 0.00 kN

BAR LAYERS

Top Layer 4 pcs. Top Layer 4 pcs. First Layer: 5 pcs.


Top Bars:
No. of Layers 3 layers No. of Layers 1 layers Second Layer: 0 pcs.
Bottom Layer 4 pcs. Bottom Layer 4 pcs. First Layer: 5 pcs.
Bottom Bars:
No. of Layers 1 layers No. of Layers 1 layers Second Layer: 0 pcs.
d= 399.50 d' = 60.00 d= 440.00 d' = 60.00 d= 240.00 d' = 60.00

DETAILED COMPUTATION

@ SUPPORT @ MIDSPAN

Calculation of d Calculation of d'


End Span (+moment) d End Span (+moment) d'
1st layer 1256.63706 440 1st layer 1256.63706 60
2nd layer 942.477796 395 2nd layer 0 105
3rd layer 942.477796 350 3rd layer 0 150
Total 3141.59265 399.5 Total 1256.63706 60
End Span (-moment) d End Span (-moment) d'
1st layer 1256.63706 440 1st layer 1256.63706 60
2nd layer 0 395 2nd layer 942.477796 105
3rd layer 0 350 3rd layer 942.477796 150
Total 1256.63706 440 Total 3141.59265 100.5

Torsion Consideration Clear Spacing Check Check Cross Section Calculation of d Calculation of d'
phi 0.75 40.00 40.00 end midspan Mid Span (+moment) d Mid Span (+moment) d
Acp 150000 40.00 40.00 1.94135229 0.37291395 1st layer 1256.63706 440 1st layer 1256.63706 60
pcp 1600 70.41268565 2nd layer 0 395 2nd layer 0 105
Tulimit 3.98278684 OK 3rd layer 0 350 3rd layer 0 150
Judgement Neglect Torsion Total 1256.63706 440 Total 1256.63706 60
Mid Span (-moment) d Mid Span (-moment) d
Xo 210 Parameters for Quadratic 1st layer 1256.63706 440 1st layer 1256.63706 60
Yo 410 a 4486.725 - 4486.725 2nd layer 0 395 2nd layer 0 105
ph 1240 b -568747.6508 - 264529.955 3rd layer 0 350 3rd layer 0 150
Ao 73185 c -45238934.21 - -56548667.8
At/s 0.02767503 Total 1256.63706 440 Total 1256.63706 60
Al 22.878022 End Midspan minor
Almin 669.471475 n 14 pcs. 14 pcs. 14 pcs.
Use Al 669.471475 add 0 0 0
total As 2711.346015 189.122882 0

Criteria S(actual) S (rounded) La pcs. Calculation of d Calculation of d'


d/4 50 50 1000 20 1-10mm. @ 50 mm. Mid Span (+moment) d End Span (+moment) d'
8db 50 50 20 @ 50 mm. o.c. 1st layer 1570.79633 240 1st layer 1570.79633 60
300 50 50 Rest @ 50 mm. o.c. 2nd layer 0 195 2nd layer 0 105
24dby 240 225 Rest Rest Total 1570.79633 240 Total 1570.79633 60

End Span Midspan Shear Design Computation


Top Top Vc 90.8807622 102.095835
8-20mm 4-20mm Vsmax 363.523049 400.375823 2 433.539786 433.539786 Spacing
Bottom Bottom phi 0.75 0.75 199.75 220 50 200
4-20mm 4-20mm 1/2phiVc 34.0802858 38.2859381 600 600 Av/s = 3.14159265
phiVc 68.1605716 76.5718762 175 200 Torsion Considered 3.19694271
2-10mm 2phiVc 181.761524 204.19167 3 72.6956036 357.660275 Torsion not Considered 3.14159265
3phiVc 204.481715 229.715629 199.75 220 S= 50
Vu 246.85 OK 116.573 OK 600 600 USE 50
Av 157.079633 157.079633 50 200
Vs 238.252571 53.3348317 4 72.6956036 357.660275
Vn 329.133333 155.430667 99.875 110
5Vc 454.403811 510.479175 300 300
2/3sq(fc)bd 363.523049 OK 400.375823 OK 50 100

SEE NEXT PAGE


DETAILED COMPUTATION

Ru = 6.873121138 0.440331344 0
ρ= 0.022622829 0.001077255 0
Asreq = 2711.346015 142.1976554 0
ρmin = 0.003381643 0.001432749 0
Asmin = 405.2898551 189.1228817 0
ẞ1 = 0.85 0.85 0.85
ρbal = 0.02137574 0.02137574 0.02137574
Asbal = 2561.882396 2821.597633 2565.088757

Type = Doubly Reinforced Singly Reinforced Doubly Reinforced

a(theo) = 152.0284445 - 5.235987756


c(theo) = 178.8569935 - 6.159985595
As' = 1256.637061 - 1570.796327
ɛy = 0.00207 - 0.00207
ɛs'= 0.001993609 - -0.026220848
Judgement = fs <> fy - fs <> fy
c= 182.1246294 - 86.59223335
a= 154.805935 - 73.60339834
fs = 402.3331599 - 184.2583265
Asprovided = 3141.592654 1256.637061 1570.796327
torsion bar = 2 pcs. 2 pcs. 2 pcs.
Stirrups = No
Tulimit = 3.982786845 3.982786845 3.982786845

Remarks: Neglect Torsion Neglect Torsion Neglect Torsion

Additional As = 0 0 0
total As req = 2711.346015 189.1228817 0

Judement = OK OK OK

ρbal = 0.031860822 0.02137574 0.043192355


ρ= 0.026212705 0.009519978 0.021816616
a= 246.3994238 98.55976952 123.1997119
Mu = 384.6056012 182.9441324 126.0686426

Judgement = OK OK OK

Vu = 246.85 116.573
Vc = 90.8807622 102.095835
Vs = 238.2525711 53.33483169

Section is ADEQUATE

Spacing: 1-10mm. @ 50 mm. , Rest @ 50 mm. o.c.

DESIGN RESULT

Result: PASSED

End Span Forces Mid Span Forces


LC Shear-Y kN Shear-Z kN Torsion kNm Moment-Y kNm Moment-Z kNm Remarks LC Shear-Y kN Shear-Z kN Torsion kNm Moment-Y kNm
Moment-Z kNm Remarks
Min Shear Y 13 -246.85 0 0.975 0 263.449 PASSED Min Shear Y 23 -116.573 0 -1.276 0 -52.58 PASSED
Max Shear Y 13 246.402 0 -0.983 0 262.663 PASSED Max Shear Y 24 114.722 0 -0.912 0 -51.234 PASSED
Min Shear Z 13 182.396 0 4.685 0 93.84 PASSED Min Shear Z 13 44.313 0 4.685 0 -132.869 PASSED
Max Shear Z 13 182.396 0 4.685 0 93.84 PASSED Max Shear Z 13 44.313 0 4.685 0 -132.869 PASSED
Min Torsion 23 84.12 0 -5.341 0 2.615 PASSED Min Torsion 23 2.411 0 -5.341 0 -60.841 PASSED
Max Torsion 23 111.472 0 5.644 0 66.372 PASSED Max Torsion 23 29.764 0 5.644 0 -37.201 PASSED
Min Moment Y 13 182.396 0 4.685 0 93.84 PASSED Min Moment Y 13 44.313 0 4.685 0 -132.869 PASSED
Max Moment Y 13 182.396 0 4.685 0 93.84 PASSED Max Moment Y 13 44.313 0 4.685 0 -132.869 PASSED
Min Moment Z 23 27.94 0 -1.276 0 -163.372 PASSED Min Moment Z 23 10.809 0 1.901 0 -170.144 PASSED
Max Moment Z 23 -232.184 0 -1.276 0 296.177 PASSED Max Moment Z 23 -49.192 0 -0.138 0 23.017 PASSED

DESIGN SUMMARY

Beam Dimension:

b= 300 mm Beam Width


h= 500 mm Beam Depth

Main Rebars:

Dm = 20 mm Longitudinal Bar Diameter

@ SUPPORT @ MIDSPAN
Top Bars = 4 pcs. 4 pcs. Top Layer
3 pcs. 1 pcs. No. of Layers
Bottom Bars = 4 pcs. 4 pcs. Bottom Layer
1 pcs. 1 pcs. No. of Layers

Stirrup Rebars:

Ds = 10 mm Stirrups Bar Diameter

Stirrup Spacing
S = 1-10mm. @ 50 mm. , Rest @ 50 mm. o.c.

This Spreadsheets is licensed only to Engr. Andro S. Rebuyas, RCE, ME-1, RMP, M.Eng-SE, M.Eng-SE, M.PICE, M.ASCE, M.SEAD

You might also like