The Steady Force in Shock & Vibration Isolation

Engineered Solutions for Controlling Shock, Vibration & Noise

U.S.A.:
Barry Controls

Engineered Solutions
40 Guest St.
Brighton, MA 02135
Tel: 617.787.1555
Fax: 617.782.8140
ENGLAND:
Barry Controls for Controlling Shock, Vibration & Noise
Molesey Road, Hersham
Walton-on-Thames
Surrey KT12 3PQ
England
THE STEADY FORCE IN SHOCK & VIBRATION ISOLATION
Tel: 44.(0) 1932.255255
Fax: 44.(0) 1932.255256
Barry Controls P.O. Box 9105, Brighton, MA 02135-9105
12/99 70-101
Barry Controls is an organization driven by the application of technology to provide
solutions to shock, vibration, noise and motion control problems across a diverse global
customer base.

We are committed to providing total customer satisfaction through continuous quality

improvement as a value added Engineered Solutions partner, offering cost effective prod-
ucts and the highest levels of customer support and service, while providing a safe and
challenging workplace for employees.

THE STEADY FORCE IN SHOCK & VIBRATION ISOLATION

Table of Contents
ISOLATOR SELECTION GUIDE Page I

BONDED TUBE MOUNTS Page 1 - 37

500 Series Page 2 - 10
500SL Series Page 11 - 14
HR Series Page 15 - 19
22000 Series Page 20 - 25
Barry-Bond Series Page 26 - 31
Industrial Conical Mount Series Page 32 - 37

Expanded
Product MACHINERY MOUNTS Page 38 - 63
Offering

SLM Series Page 39 - 41

LM Series Page 42 - 45
LMS Series Page 46 - 47
633A Series Page 48 - 50
Industrial Machinery Mounts Page 51 - 54
Neoprene Pad Series Page 55 - 56
Elastomer Spring Series Page 57 - 58
Wedge Mounts Page 59 - 61
990/915 Mount Series Page 62 - 63

CUP-STYLE MOUNTS Page 64 - 94

Cupmounts Page 65 - 70
S Mount Series Page 71 - 73
L Mount Series Page 74 - 79
H Mount Series Page 80 - 82
T Mount Series Page 83 - 87
B Mount Series Page 88 - 94

HIGH DEFLECTION MOUNTS Page 95 - 114

ME Series Page 96 - 98
TTA Series Page 99 - 100
TTB Series Page 101 - 102
HTTA Series Page 103 - 104
VHC Series Page 105 -106
2K Series Page 107 - 110
GB530 Series Page 111 - 112
GBCO (Barry-Flex) Page 113 - 114
Expanded
Product
Offering
LOW PROFILE MOUNTS Page 115 - 129
6300/6550 Series Page 116 - 118
E21/E22 Series Page 119 - 121
5200 Series Page 122 - 124
6820 Series Page 125 - 127
Multiaxis Mounts Page 128 - 129
(Cont...)
5th Edition
Table of Contents
CYLINDRICAL STUD MOUNTS Page 130 - 139
Expanded
Offering
Double Stud (Male/Male) Series Page 131 - 136
Double Stud G05 Series Page 137
Stud/Insert (Male/Female) Series Page 138
Bumpers (Male Stud only) Series Page 139

ALL ELASTOMER ISOLATORS Page 140 - 150

W Series Ring & Bushing Mounts Page 141 - 146
Ball Mount Series Page 147 - 150

METAL & MESH ISOLATORS Page 151 - 175

1200 Series Page 152 - 153
MET-L-FLEX Bushings Page 154 - 155
9300 Series Page 156 - 157
Cablemount Series Page 158 - 175

CASTERS Page 176 - 182

LO-G 300 Series Page 177 - 178
LO-G 900 Series Page 179 - 180
LO-G Twin Wheel Medical Series (Custom) Page 181 - 182

SPECIALTY ISOLATORS Page 183 - 198

V Spring Engine Mounts Page 184 - 185
Suspension Spring Pivot Page 186 - 187
Marine Engine Mounts Page 188 - 192
Navy Mounts Page 193 - 198
 Product Index
Number Prefix: This index shows all isolators and isolator families that begin with a number.
2K Series ............................................................................107 2543 ......................................................................................15
275 ......................................................................................148 25641 ....................................................................................15
297 ........................................................................................54 27050 ..................................................................................122
302 ......................................................................................149 27051 ..................................................................................122
372 ......................................................................................148 27052 ..................................................................................122
500 ..........................................................................................2 27166 ..................................................................................182
500SL....................................................................................11 27327 ....................................................................................32
633A......................................................................................48 27328 ....................................................................................32
661 ........................................................................................52 26748 ....................................................................................32
670 ........................................................................................53 26749 ....................................................................................32
1000 ......................................................................................66 27595 ....................................................................................32
1201/1202 ..........................................................................152 27391 ..................................................................................191
2000 ......................................................................................67 27458 ..................................................................................192
3000 ......................................................................................68 30005 ....................................................................................55
4000 ......................................................................................69 880749 ..................................................................................93
5200 ....................................................................................122 885368 ..................................................................................97
6300/6550 ..........................................................................116 8810015 ................................................................................95
6820 ....................................................................................125 8810090 ................................................................................99
7110 ....................................................................................149 9810145 ................................................................................20
9300 ....................................................................................156 9810276 ................................................................................29
22000 ....................................................................................20

Letter Prefix: This index shows all isolators and isolator families that begin with a letter.
2K Series ............................................................................107 HR Series ..............................................................................15
A21......................................................................................132 HTTA Series ........................................................................103
A22......................................................................................132 L-Mounts ..............................................................................74
A23......................................................................................132 LM Series ..............................................................................42
A32......................................................................................132 LMS Series............................................................................46
A34......................................................................................132 ME Series ..............................................................................96
A43......................................................................................132 MG Series............................................................................146
B-Mounts ..............................................................................88 NC1000-NC4000 ..................................................................57
BC1120-BC1125....................................................................26 N5200 Series ......................................................................115
C1000-C4000 ........................................................................57 N6300/N6550 ......................................................................109
CMO Series ........................................................................159 R18733 ..........................................................................10, 14
E21/E22 Series ....................................................................119 S-Mounts ..............................................................................71
“EES” Mounts......................................................................187 SLM Series............................................................................39
ES3000 Series ......................................................................57 T-Mounts ..............................................................................83
F50 ......................................................................................189 TTA Series ............................................................................99
G05......................................................................................122 TTB Series ..........................................................................101
GBCO Series........................................................................113 UC1000-UC4000 ..................................................................57
GB530 Series ......................................................................111 VHC Series ..........................................................................105
H-Mounts ..............................................................................80 WR/WB Series ....................................................................142

Name Index: This index lists products by trade name or product description.
Air Damped Isolators ............................................................64 Marine Mounts ....................................................................188
Ball Mounts ........................................................................147 Navy Mounts ......................................................................193
Barry Bond ............................................................................26 Pad Mounts ..........................................................................53
Bonded Ring and Bushing ....................................................20 Pneumatic Isolators (SLM Series)* ......................................39
Cable Mounts ......................................................................158 Ring and Bushing................................................................141
Casters ................................................................................176 Snubbing Washers (22000) ..................................................24
Cupmounts............................................................................64 Snubbing Washers (500 Series) ..........................................10
Cylindrical Mounts ..............................................................130 Snubbing Washers (500SL Series) ......................................14
DIM Pad ................................................................................55 Snuubbing Washers (Barry-Bond Series) ............................29
Industrial Conical Mounts (ICM) ..........................................32 Snubbing Washers (HR Series) ............................................19
LO-G Casters ......................................................................177 Snubbing Washers (ICM Series) ..........................................36
Mare Island Mounts ............................................................194 Stabl-Levl ..............................................................................39
Notes
 PRODUCT INFORMATION
We have made every effort to insure that the information contained in this
catalog is correct at the time of publication. However, due to a continuing
program of product improvement, some specifications, dimensions, materi-
als or performance characteristics may change. Therefor, we suggest that
you contact Barry Controls prior to using the dimensional perfor-
mance, or environmental data as the basis for drawings or specifica-
tions. The information contained in this catalog is for reference only and the
latest drawings are available on request.

BARRY CONTROLS designs the products described in this catalog for maximum performance,
efficiency, and length of service. They are built according to selected standards of choice of
material and method of manufacture.

BARRY CONTROLS warrants that all parts manufactured by it shall be free from defects in
material or workmanship under proper and normal use. BARRY CONTROLS, at its option,
shall repair or replace, free of charge, any part covered by the warranty which shall be returned
to BARRY CONTROLS’ shipping point, transportation charges prepaid, within ninety (90) days
from shipment by BARRY CONTROLS and which examination proves defective in material or
workmanship. BARRY CONTROLS shall not be liable for any repairs or replacements of parts
covered by this warranty, except those made with BARRY CONTROLS’ prior written consent.
BARRY CONTROLS shall be liable for breach of this warranty only if it receives written notice
of such breach within ninety (90) days from the date of shipment of the product to which the
breach relates. The foregoing shall constitute the sole remedy for the purchaser for any breach
by BARRY CONTROLS of its warranty.

When BARRY CONTROLS is to supply design specifications only, BARRY CONTROLS makes
no warranty with respect to defects in materials or workmanship of items manufactured or
installed by others. If BARRY CONTROLS is to undertake to manufacture and complete instal-
lation as well as supply the design specifications, BARRY CONTROLS warrants that the instal-
lation shall be free from defects in material or workmanship under proper and normal use.
BARRY CONTROLS shall cause any such defects to be repaired if it receives written notice of
such defects within ninety (90) days from the completion of the installation. BARRY CON-
TROLS MAKES NO OTHER WARRANTIES REGARDING PARTS MANUFACTURED BY IT,
CUSTOM DESIGN SPECIFICATIONS SUPPLIED BY IT, OR CUSTOM INSTALLATIONS
COMPLETED BY IT OR ITS AGENTS (INCLUDING WITHOUT IMPLIED LIMITATION WAR-
RANTIES AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR WAR-
RANTIES AGAINST INFRINGEMENT OF ANY PATENT), EITHER EXPRESS OR IMPLIED,
EXCEPT AS PROVIDED HEREIN.

If questions should arise regarding proper selection, use or installation procedures, consult
BARRY CONTROLS for details and recommendations.
Bonded Tube Mounts

• 500 Mount Series

• 500SL Mount Series
• HR Mount Series
• 22000 Mount Series
• Barry-Bond Mount Series
• Industrial Conical Mount Series

1
 500 MOUNT SERIES
Low-profile, high capacity mounts for vibration and shock
protection.

Features
• Fail-safe when used with
snubbing washer

• Axial to radial stiffness of 1:1

• Low natural frequency

• Sturdy, reliable construction

Benefits
• Economical

• Bonded construction provides constant

performance characteristics
500 Series mounts are low cost isolators Applications
• Overlapping load ranges that provide high load carrying capacity, • Truck, bus and marine engines
compact size and stability. These all atti- • Generators
• HVAC equipment
Load Range tude mounts are perfect for isolating • Electronic equipment
• 7 sizes with 31 load ratings to 1,780 truck, bus and marine engines. • Truck cabs
lbs. per isolator • Machinery, pumps & compressors

Caution: Not suitable for skid steer loaders.

NATURAL FREQUENCY 8-18 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Sintered metal and cold-rolled steel
WEIGHT See dimensional drawings

Environmental Data
• Neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C to +82˚C)
and is resistant to oils, most solvents and ozone.
• Special elastomers and finishes are available for applications in severe environments. Please note
that Silicone elastomer is not compatible with nickel plating.

2
 500 Mount Series (505/506)
Dimensions & Performance Characteristics
SERIES 505 (.25 lbs.) - NOT FOR RADIAL LOADING SERIES 506 ( 5 oz.) - NOT FOR RADIAL LOADING

AXIAL STATIC LOAD RANGE - 505 (LBS.) COLOR AXIAL STATIC LOAD RANGE - 506 (LBS.) COLOR
Code Min. Nominal Max. CODE Code Min. Nominal Max. CODE
-1 12.5 25 38 Red & White -1 25 50 75 Red & White
-2 20 40 60 Blue & White -2 35 70 105 Blue & White
-3 30 60 90 Yellow & White -3 50 100 150 Yellow & White

505 Series Performance Data 506 Series Performance Data

Load vs. Deflection Load vs. Natural Frequency Load vs. Deflection Load vs. Natural Frequency
150 150 250 200

-3
125 100
200
-3 100

100
-2
150
LOAD (LBS)

LOAD (LBS)

LOAD (LBS)

LOAD (LBS)

-2
75

-1
100
-3 -3
50
-1
-2
-2
50
25

-1
-1
0 10 0 10
0 0.05 0.1 0.15 0.2 0.25 5 6 7 8 9 10 12 14 16 18 20 25 0 0.05 0.1 0.15 0.2 0.25 5 6 7 8 9 10 12 14 16 18 20 25
DEFLECTION (IN) FREQUENCY (HZ) DEFLECTION (IN) FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

3
 500 Mount Series (507)
Dimensions & Performance Characteristics

507 MOUNT SERIES (.50 lbs.) 507 Series Performance Data

Dimensional Drawing
Load vs. Deflection
500

-5
450

400
-4

350
-3
300

LOAD (LBS)
250
-2

200
-1
150

100

50

0
0 0.04 0.08 0.12 0.16 0.2
DEFLECTION (HZ)
DEFLECTION (IN)

Load vs. Natural Frequency

1000

507 SERIES LOAD RANGE (lbs.) COLOR

Axial Static Load Range Radial Static Load Range CODE
Code* Nominal Max. Nominal Max.
LOAD (LBS)

-1 100 150 50 100 Red & White

100
-2 120 180 60 120 Orange
-3 150 225 75 150 Yellow -5
-4 180 270 90 180 Green -4
-3
-2
-5 220 330 110 220 Blue -1

* All available in white. 10

5 6 7 8 9 10 12 14 16 18 20 25
FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

4
 500 Mount Series (508)
Dimensions & Performance Characteristics

508 MOUNT SERIES (.81 lbs.) 508 Series Performance Data

Dimensional Drawing
Load vs. Deflection

1000

900 -5

800

700 -4

600 -3

LOAD (LBS)
500

400 -2

-1
300

200

100

0
0 0.04 0.08 0.12 0.16 0.2 0.24
DEFLECTION (HZ)
DEFLECTION (IN)

Load vs. Natural Frequency

1000

508 SERIES LOAD RANGE (lbs.) COLOR

Axial Static Load Range Radial Static Load Range CODE
LOAD (LBS)

Code* Nominal Max. Nominal Max. 100

-1 180 270 90 180 Red -5

-4
-3
-2 220 330 110 220 Orange -2
-1
-3 260 390 130 260 Yellow
-4 320 480 160 320 Green
-5 380 570 190 380 Blue
10
5 6 7 8 9 10 12 14 16 18 20 25
FREQUENCY (HZ)
*All available in white.

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

5
 500 Mount Series (510)
Dimensions & Performance Characteristics

510 MOUNT SERIES (1.19 lbs.) 510 Series Performance Data

Dimensional Drawing
Load vs. Deflection
2000

1800

1600

1400 -5

1200 -4

LOAD (LBS)
1000 -3

800 -2

-1
600

400

200

0
0 0.04 0.08 0.12 0.16 0.2 0.24
DEFLECTION (HZ)
DEFLECTION (IN)

Load vs. Natural Frequency

10000

510 SERIES LOAD RANGE (lbs.) COLOR

Axial Static Load Range Radial Static Load Range CODE
LOAD (LBS)

Code* Nominal Max. Nominal Max.

1000
-1 320 480 150 320 Orange
-2 380 570 190 380 Yellow
-3 460 690 230 460 Green
-4 560 840 280 560 Blue -5
-4
-3
-5 680 1020 340 680 Brown -2
-1
100
5 6 7 8 9 10 12 14 16 18 20 25
*All available in white. FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

6
 500 Mount Series (512)
Dimensions & Performance Characteristics

512 MOUNT SERIES (2.06 lbs.) 512 Series Performance Data

Dimensional Drawing
Load vs. Deflection

2000

1800 -5

1600 -4 -3

1400

1200 -2

LOAD (LBS)
1000

-1
800

600

400

200

0
0 0.04 0.08 0.12 0.16 0.2 0.24
DEFLECTION (HZ)
DEFLECTION (IN)

Load vs. Natural Frequency

10000

512 SERIES LOAD RANGE (lbs.) COLOR

Axial Static Load Range Radial Static Load Range CODE
Code* Nominal Max. Nominal Max.
LOAD (LBS)

1000
-1 460 690 230 450 Red
-2 560 840 280 560 Orange
-3 680 1020 340 680 Yellow -5
-4
-4 830 1245 415 830 Green -3
-2
-1
-5 1000 1500 500 1000 Blue
100
5 6 7 8 9 10 12 14 16 18 20 25
*All available in white. FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

7
 500 Mount Series (516)
Dimensions & Performance Characteristics

516 MOUNT SERIES (5.44 lbs.) 516 Series Performance Data

Dimensional Drawing
Load vs. Deflection
4800

4200 -5

3600

3000 -4

LOAD (LBS)
-3

2400
-2

1800
-1

1200

600

0
0 0.04 0.08 0.12 0.16 0.2 0.24
DEFLECTION (HZ)
DEFLECTION (IN)

Load vs. Natural Frequency

10000

516 SERIES LOAD RANGE (lbs.) COLOR

Axial Static Load Range Radial Static Load Range CODE
Code* Nominal Max. Nominal Max.
LOAD (LBS)

-1 830 1245 415 830 Red 1000

-2 1000 1500 500 1000 Orange -5

-4
-3 1210 1815 605 1210 Yellow -3
-2
-4 1470 2205 735 1470 Green -1

-5 1780 2700 890 1780 Blue

*All available in white. 100

5 6 7 8 9 10 12 14 16 18 20 25
FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

8
500 Mount Series
Technical Data

500 SERIES MAXIMUM TIGHTENING TORQUES

Part # Bolt Diameter Torque (dry) Torque (lubricated or plated)
505 .313 25* 20*
506 .375 45* 35*
507 .433 80* 60*
508 .500 120* 90*
510 .625 240* 180*
512 .750 380 280
516 1.000 365 275
* = GRADE 8 BOLT TORQUE

500 MOUNT SERIES RECOMMENDED INSTALLATION HOW TO ORDER 500 SERIES ISOLATORS
LOAD

500 - 1 - N - S
DIRECTION

EQUIPMENT
TO BE
ISOLATED Basic model #
SUPPORT
STRUCTURE
Code for load rating

“N” = Neoprene
SNUBBING
WASHER “R” = Natural Rubber
LOAD LOAD
“B” = Butyl
DIRECTION DIRECTION
“S” = Silicone
EQUIPMENT
TO BE
ISOLATED
“L” = Barry LT

SUPPORT
STRUCTURE “S” = Standard resistant varnish
“P” = Black enamel paint
“E” = Electroless nickel
Standard suffix is “NS”. Consult factory for availability and compatibility
of other materials & finishes.

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

9
 500 Mount Series (Snubbing Washer)
Dimensions

500 MOUNT SERIES SNUBBING WASHER

ØB

The use of snubbing washers is recommended to ensure proper static

and dynamic loading of the isolator and retention of suspended equip-
ment under severe shock environments.

Snubbing washers are ordered by separate part numbers as shown in

the table below. The standard material is low-carbon steel and the
C
standard finish is zinc plate. Other materials and finishes are avail-
able upon request.

ØA Please consult with Barry Controls Applications Engineering at 1-800-

Barry-MA for more information on the use of snubbing washers.

Size “A” Dia. “B” Dia. “C” Part #

505 1.63 .322 .093 R18733-6
506 1.75 .385 .093 R18733-7
507 2.00 .450 .125 R18733-1
508 2.00 .510 .125 R18733-2
510 2.25 .635 .150 R18733-3
512 2.50 .780 .188 R18733-4
516 3.25 1.010 .250 R18733-5

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

10
 500SL MOUNT SERIES
Rugged, versatile isolator utilizes elastomer-in-shear for low
frequency vibration and in compression for impact shock.

Features
• Fail-safe when used with
snubbing washer

• Axial to radial stiffness of 1:2.5

• Low natural frequency

• Sturdy, reliable construction

Benefits
• Economical

• Bonded construction provides constant

performance characteristics
Barry 500SL Series mounts are best suit- Applications
• Overlapping load ranges ed for applications that require a low ver- • Truck, bus and marine engines
tical natural frequency in conjunction with • Generators
• HVAC equipment
Load Range impact shock protection and superior • Farm and construction equipment
• 558SL = 2 load ratings to 250 lbs. structure borne noise attenuation. • Truck cabs
per mount • Machinery, pumps & compressors

• 562SL = 2 load ratings to 520 lbs.

per mount

• 566SL = 2 load ratings to 1,800 lbs. NATURAL FREQUENCY 7-10 Hertz

per mount TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Cold-rolled steel
WEIGHT See dimensional drawings

Environmental Data
• Neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C to +82˚C)
and is resistant to oils, most solvents and ozone.
• Special elastomers and finishes are available for applications in severe environments. Please note
that silicone elastomer is not compatible with nickel plating.

11
 500SL Mount Series (558SL/562SL)
Dimensions & Performance Characteristics
SERIES 558SL Dimensional Drawing (11 oz.) SERIES 562SL Dimensional Drawing (1 lb. 13 oz.)

AXIAL STATIC LOAD RANGE - 558SL AXIAL STATIC LOAD RANGE - 562SL
Code Minimum Maximum Code Minimum Maximum
-1 50 lbs. 110 lbs. -1 130 lbs. 260 lbs.
-2 90 lbs. 180 lbs. -2 260 lbs. 520 lbs.

558SL Series Performance Data 562SL Series Performance Data

Load vs. Deflection Load vs. Natural Frequency Load vs. Deflection Load vs. Natural Frequency

1000 2500 800

300
600

800 2000 400

100
LOAD (LBS)

200
LOAD (LBS)

1500
LOAD (LBS)

LOAD (LBS)

600
L
IA
AX
-2
IAL

IAL
100
L

1000
AD
DIA

400 AX -2
-2 -2
R
RA

-2

IAL 60
-2

L X -1
IA - 1A XIAL
D 500
200 A -1 A
-1
R AL 40
DI
RA
-1 -1

0 0 20
10
5 8 10 15 20 30 0 0.2 0.4 0.6 0.8 5 10 30
0 0.2 0.4 0.6 0.8
NATURAL FREQUENCY (HZ) DEFLECTION (IN) NATURAL FREQUENCY (HZ)
DEFLECTION (IN)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

12
 500SL Mount Series (566SL & Snubbing Washer)
Dimensions & Performance Characteristics

SERIES 566SL Dimensional Drawing (4 lbs. 12 oz.) 566SL Series Performance Data

Load vs. Deflection

5000

4000

LOAD (LBS)
3000

IAL
AD
L

AL
2000 IA
IAL

-2 R
AX

DI
-2 AX

RA
-1

-1
1000

0
0 0.2 0.4 0.6 0.8
DEFLECTION (IN)

Load vs. Natural Frequency

2000

1000

AXIAL STATIC LOAD RANGE - 566SL

LOAD (LBS)

Code Minimum Maximum

-1 500 lbs. 1000 lbs.
-2 900 lbs. 1800 lbs.
-2

-1
100
5 10 30
NATURAL FREQUENCY (HZ)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:
1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

13
 500SL Mount Series (Snubbing Washer)
Dimensions

500SL MOUNT SERIES SNUBBING WASHER

Size “A” Dia. “B” Dia. “C” Part #

ØB 558SL 2.00 .510 .125 R18733-2
562SL 2.50 .760 .188 R18733-4
566SL 3.25 1.010 .250 R18733-5

The use of snubbing washers is recommended to ensure proper static and dynamic loading of
C the isolator and retention of suspended equipment under severe shock environments.

Snubbing washers are ordered by separate part numbers as shown in the above table. The
standard material is low-carbon steel and the standard finish is zinc plate. Other materials
ØA
and finishes are available upon request.

Please consult with Barry Controls Applications Engineering at 1-800-Barry-MA for more
information on the use of snubbing washers.

HOW TO ORDER 500SL SERIES ISOLATORS

500SL - 1 - N - S

Basic model #

Code for load rating

“N” = Neoprene
“R” = Natural Rubber
“B” = Butyl
“S” = Silicone
“L” = Barry LT

“S” = Standard resistant varnish

“P” = Black enamel paint
“E” = Electroless nickel
Standard suffix is “NS”. Consult factory for availability and compatibility of other
materials & finishes.
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

14
 HR MOUNT SERIES
Vibration mounts for effective isolation of small to medium
sized diesel engines.

Features
• Wide load range

• Axial to radial stiffness of 6:1

• Low stiffness in roll mode

• Sturdy, reliable construction

Benefits
• Built-in rebound protection

• Excellent performance even with

difficult to isolate five, three, two or
even single cylinder engines
Barry HR Series mounts are best suited for Applications
• Overlapping load ranges isolation of diesel engines with five or less • Small to medium diesel engines
cylinders for on or off-highway applica- • Generators
• Fail-safe when used with snubbing • Recreational/off road vehicles
tions. The standard neoprene elastomer • Farm and construction equipment
washer provides resistance to oils and most sol- • Motors
vents. Other elastomers are available, • Machinery, pumps & compressors
Load Range
consult factory for more information.
• 2 Sizes and 5 stiffness from 25 -
400 lbs. per isolator

NATURAL FREQUENCY 10-20 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Steel and sintered metal
WEIGHT 7 oz. (25453) 9 oz. (25641)

Environmental Data
• Neoprene elastomer has an operating temperature range of -40˚C to +93˚C and is resistant to
oils, most solvents and ozone.

15
 HR Mount Series (25453)
Dimensions & Performance Characteristics

25453 Series Performance Data

25453 Series Dimensional Drawing

Load vs. Deflection

1000

-9
800

LOAD (LBS)
600 -7

-5
400

-3
200
-1

0
0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (IN)

Load vs. Natural Frequency

500
LOAD (LBS)

100

AXIAL STATIC LOAD RANGE - 25453 -9

-7

Code Nominal Color Code -5

-1 50 lbs. Red -3

-1
-3 90 lbs. White 10
8 10 12 14 16 18 20

-5 150 lbs. Blue NATURAL FREQUENCY (HZ)

-7 215 lbs. Purple

-9 300 lbs. Gray

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

16
 HR Mount Series (25641)
Dimensions & Performance Characteristics

25641 Series Dimensional Drawing 25641 Series Performance Data

Load vs. Deflection

1200 -10

1000
-8

800

LOAD (LBS)
-6
600

-4
400
-2
200

0
0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (IN)

Load vs. Natural Frequency

1000
LOAD (LBS)

100
AXIAL STATIC LOAD RANGE - 25641
-10
-8
-6
Code Nominal Color Code -4

-2 100 lbs. Red -2

-4 155 lbs. White 10

8 10 12 14 16 18 20
NATURAL FREQUENCY (HZ)
-6 230 lbs. Blue
-8 320 lbs. Purple
-10 420 lbs. Gray

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

17
 HR Mount Series
Technical Data

HR SERIES RECOMMENDED INSTALLATION

25453

25641

HR SERIES MAXIMUM TIGHTENING TORQUES (FT - LBS)

Part # Bolt Diameter Torque (dry) Torque (lubricated or plated)

25453 .375 45* 35*

25641 .500 120* 90*

* = GRADE 8 BOLT TORQUE

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

18
 HR Mount Series (Snubbing Washer)
Dimensions

HR MOUNT SERIES SNUBBING WASHER

ØB

The use of snubbing washers is recommended to ensure proper static

and dynamic loading of the isolator and retention of suspended equip-
ment under severe shock environments.

Snubbing washers are ordered by separate part numbers as shown in

the table below. The standard material is low-carbon steel and the
C
standard finish is zinc plate. Other materials and finishes are avail-
able upon request.

ØA Please consult with Barry Controls Applications Engineering at 1-800-

Barry-MA for more information on the use of snubbing washers.

Size “A” Dia. “B” Dia. “C” Part #

25453 2.00 .45 .125 R18733-1
25641 2.13 .532 .134 9810145-02804

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

19
 22000 MOUNT SERIES
Low-profile, high capacity mounts for vibration and shock
protection.

Features
• Fail-safe when used with
snubbing washer

• Axial to radial stiffness of 1:1

• Low natural frequency

• Sturdy, reliable construction

Benefits
• Economical

• Bonded construction provides constant

performance characteristics
22000 Series mounts are designed to Applications
• Overlapping load ranges withstand the rigors of heavy-duty vehic- • Truck, bus and marine engines
ular applications, off-the-road equipment, • Generators
• HVAC equipment
Load Range large trucks and construction equipment. • Electronic equipment
• 5 sizes with 25 load ratings to 4,560 The standard neoprene elastomer is resis- • Truck cabs
lbs. per isolator tant to oil, and other materials are avail- • Machinery, pumps & compressors
able on special order.

NATURAL FREQUENCY 8-18 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Sintered metal and cold-rolled steel
WEIGHT See dimensional drawings

Environmental Data
• Neoprene elastomer has an operating temperature range of -40˚C to +93˚C and is resistant to
oils, most solvents and ozone.
• Special elastomers and finishes are available for applications in severe environments.

20
 22000 Mount Series
Dimensions

22000 MOUNT SERIES

Dimensional Drawing (Inches)

øA øB

øE

Part # A B C D E F G Weight
22001 1.31 .397 .485 1.25 0.79 0.00 0.04 1.5 oz.
22002 1.88 .532 0.78 1.94 1.30 0.15 0.06 5.0 oz.
22003 2.55 .657 0.90 2.43 1.58 0.25 0.09 11.0 oz.
22004 3.50 .938 1.00 2.88 2.30 0.20 0.12 1 lb. 7.5 oz.
22005 4.88 1.063 1.25 3.38 2.55 0.20 0.12 2 lb. 14 oz.

Dimensions and data are reference

only and are subject to change
without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

21
 22000 Mount Series
Performance Characteristics

22001 Series Axial Load vs. Deflection

22001 Axial
2000

1800 -15

1600

1400

-14
1200
LOAD (LBS)

1000

800 -13

600
-12
400
-11
200

0
0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16
DEFLECTION (INCHES)

22002 Series Axial Load vs. Deflection

Thin Center Mounting Structure Thick Center Mounting Structure

2000 2800
-15 -15
2600
1800
2400
1600 2200

1400 2000

1800
1200
-14
LOAD (LBS)

LOAD (LBS)

1600
-14
1000 1400

1200
800
1000
-13 -13
600 800
-12 -12
400 600
-11 -11
400
200
200

0 0
0 0.05 0.1 0.15 0.2 0.25 0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (INCHES) DEFLECTION (INCHES)

Dimensions and data are reference

only and are subject to change
without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

22
 22000 Mount Series
Performance Characteristics

22003 Series Axial Load vs. Deflection

Thin Center Mounting Structure Thick Center Mounting Structure

3000 6000
-15 -15
5500

2500 5000

4500

2000 -14 4000

3500
LOAD (LBS)

1500 LOAD (LBS) 3000 -14

-13 2500

1000 2000 -13

-12
1500
-11
500 1000 -12
-11
500

0 0
0 0.05 0.1 0.15 0.2 0.25 0.3 0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (INCHES) DEFLECTION (INCHES)

22004 Series Axial Load vs. Deflection

Thin Center Mounting Structure Thick Center Mounting Structure

10000 11000
-15

9000 -15 10000

9000
8000

8000
7000
7000
6000 -14
LOAD (LBS)
LOAD (LBS)

6000
5000
5000
-14
4000 -13
4000
3000
-12 3000 -13
2000 -12
-11 2000

1000 1000 -11

0 0
0 0.05 0.1 0.15 0.2 0.25 0.3 0 0.05 0.1 0.15 0.2 0.25 0.3
DEFLECTION (INCHES) DEFLECTION (INCHES)

Dimensions and data are reference

only and are subject to change
without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

23
 22000 Mount Series (Snubbing Washer & 22005)
Performance Data & Dimensions

22000 MOUNT SERIES SNUBBING WASHER

The use of snubbing washers is recommended to ensure proper static and dynamic loading of the
isolator and retention of suspended equipment under severe shock environments.

ØB Snubbing washers are ordered by separate part numbers as shown in the table below. The standard
material is low-carbon steel and the standard finish is zinc plate. Other materials and finishes are avail-
able upon request.
Please consult with Barry Controls Applications Engineering at 1-800-Barry-MA for more information
on the use of snubbing washers.

Size “A” Dia. “B” Dia. “C” Part #

C 22001 1.56 .391 .090 9810145-01804
22002 2.13 .532 .134 9810145-02804
ØA
22003 2.81 .657 .188 9810145-03804
22004 3.88 .938 .250 9810145-04804
22005 5.25 1.063 .375 9810145-05804

22005 Series Axial Load vs. Deflection

Thin Center Mounting Structure Thick Center Mounting Structure

20000 20000
-15
18000 -15 18000

16000 16000

14000 14000

-14 -14
12000 12000
LOAD (LBS)

LOAD (LBS)

10000 10000
-13
8000 -13 8000

6000 -12 6000

-12

4000 -11 4000 -11

2000
2000

0
0
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35
DEFLECTION (INCHES) DEFLECTION (INCHES)

Dimensions and data are reference

only and are subject to change
without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555

24
 22000 Mount Series
Static Load Ratings & Installation Data

*Ratings are for general industrial applications. For heavy-duty applications, please call Barry Controls Application Engineering at 1-800-BARRY MA.

Snubbing Isolated
Washer Equipment

Part # (ø”A”) “R”

Support
22001 .75 .04 Structure
Mounting Hole
Ø"A"
22002 1.25 .06
Radius "R"
(Required)
22003 1.50 .09
Isolated
Structure
22004 2.25 .12 Snubbing
Washer
22005 2.50 .12

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555

25
 BARRY-BOND MOUNTS
Versatile, low cost elastomeric isolators protect against shock &
vibration and reduce structure-borne noise in vehicular and
industrial applications.
Features
• One piece bonded construction

• Compact size

• Rebound feature formed during

installation

Benefits
• Easy, low cost installation

• Cushioned snubbing in all

directions

• Consistent performance
Barry-Bond Mounts are designed for multi- Applications
• Multi-directional vibration isolation directional vibration isolation, shock atten- • Engines
uation and noise reduction due to structure- • Operator compartments (cabs)
• Noise attenuation • Radiators
borne vibrations. These one-piece, fail-safe • Pumps
• Fail-safe when used with mounts are easy to install and provide con- • Compressors
recommended snubbing washers sistent performance. • Machinery

Load Range
• Six sizes with axial load ranges
from 75 to 2,100 lbs. per mount RESILIENT ELEMENT Natural rubber
STANDARD MATERIALS Steel
WEIGHT BC-1120-1 & 3 .02 lbs.
BC-1121-2 & 4 .10 lbs.
BC-1122-2 & 4 .16 lbs.
BC-1123-2 & 5 .36 lbs.
BC-1124-2 & 5 .56 lbs.
BC-1125-2 & 4 .86 lbs.

Environmental Data
• Natural Rubber elastomer has an operating temperature range of -40˚C to +85˚C.

26
 Barry-Bond Mount Series
Dimensions & Load Ranges

BARRY-BOND MOUNT SERIES

Dimensional Drawing

Part Number Drawing Number Maximum Axial Static Load Rating (lbs.) Part Dimensions (inches)
A B C D E F
BC-1120-1 27365 75 lbs. 1.09 0.40 0.81 1.02 0.62 0.22
BC-1120-3 27365 125 lbs. 1.09 0.40 0.81 1.02 0.62 0.22
BC-1121-2 27366 250 lbs. 1.75 0.532 1.24 1.25 1.00 0.41
BC-1121-4 27365 450 lbs. 1.75 0.532 1.24 1.25 1.00 0.41
BC-1122-2 27367 350 lbs. 2.00 0.532 1.35 1.62 1.31 0.53
BC-1122-4 27365 600 lbs. 2.00 0.532 1.35 1.62 1.31 0.53
BC-1123-2 27368 500 lbs. 2.50 0.648 1.62 2.00 1.69 0.62
BC-1123-5 27365 1,000 lbs. 2.50 0.648 1.62 2.00 1.69 0.62
BC-1124-2 27369 750 lbs. 2.98 0.648 1.98 2.22 2.00 0.81
BC-1124-5 27365 1,400 lbs. 2.98 0.648 1.98 2.22 2.00 0.81
BC-1125-2 27370 1,400 lbs. 3.74 0.803 2.23 2.48 2.00 1.00
BC-1125-4 27365 2,100 lbs. 3.74 0.803 2.23 2.48 2.00 1.00

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

27
 Barry-Bond Mount Series
Dimensions & Bolt Information

BARRY-BOND MOUNT SERIES

Installation Drawing

Part Number Drawing Number Required Mating Dimensions (Inches) Recommended Bolt Information
H I K S T R Size Grade Torque (ft-lb)
SAE ISO
BC-1120-1 27365 0.21 1.25 1.12 0.75 0.31 0.06 3/8” 2 5.8 23
BC-1120-3 27365 0.21 1.25 1.12 0.75 0.31 0.06 3/8” 2 5.8 23
BC-1121-2 27366 0.38 2.00 1.50 1.12 0.38 0.06 1/2” 2 5.8 55
BC-1121-4 27365 0.38 2.00 1.50 1.12 0.38 0.06 1/2” 2 5.8 55
BC-1122-2 27367 0.45 2.25 2.00 1.25 0.62 0.06 1/2” 2 5.8 55
BC-1122-4 27365 0.45 2.25 2.00 1.25 0.62 0.06 1/2” 2 5.8 55
BC-1123-2 27368 0.56 2.88 2.25 1.50 0.75 0.06 5/8” 8 10.9 240
BC-1123-5 27365 0.56 2.88 2.25 1.50 0.75 0.06 5/8” 8 10.9 240
BC-1124-2 27369 0.71 3.50 2.50 1.81 0.93 0.06 5/8” 8 10.9 240
BC-1124-5 27365 0.71 3.50 2.50 1.81 0.93 0.06 5/8” 8 10.9 240
BC-1125-2 27370 0.94 4.25 3.00 2.00 0.75 0.12 3/4” 8 10.9 420
BC-1125-4 27365 0.94 4.25 3.00 2.00 0.75 0.12 3/4” 8 10.9 420

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

Barry Controls tion assistance, call toll free:
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

28
Barry-Bond Mount Series
Snubbing Washer

BARRY-BOND MOUNT SERIES SNUBBING WASHER

ØB

The use of snubbing washers is recommended to ensure proper static

and dynamic loading of the isolator and retention of suspended equip-
ment under severe shock environments.

Snubbing washers are ordered by separate part numbers as shown in

the table below. The standard material is low-carbon steel and the
C
standard finish is zinc plate. Other materials and finishes are avail-
able upon request.

ØA Please consult with Barry Controls Applications Engineering at 1-800-

Barry-MA for more information on the use of snubbing washers.

Part Number Head Washer Part Dimensions (Inches) Tail Washer Part Dimensions (Inches)
Part Number A BB CC Part Number A B C

BC-1120-1 9810276-02804 1.25 0.40 0.125 9810276-01804 1.12 0.40 0.125

BC-1120-3 9810276-02804 1.25 0.40 0.125 9810276-01804 1.12 0.40 0.125
BC-1121-2 9810276-04804 2.00 0.52 0.125 9810276-03804 1.50 0.52 0.125
BC-1121-4 9810276-04804 2.00 0.52 0.125 9810276-03804 1.50 0.52 0.125
BC-1122-2 9810276-05804 2.25 0.52 0.125 9810276-04804 2.00 0.52 0.125
BC-1122-4 9810276-05804 2.25 0.52 0.125 9810276-04804 2.00 0.52 0.125
BC-1123-2 9810276-08804 2.88 0.66 0.125 9810276-06804 2.25 0.64 0.125
BC-1123-5 9810276-08804 2.88 0.66 0.125 9810276-06804 2.25 0.64 0.125
BC-1124-2 9810276-10804 3.50 0.64 0.190 9810276-07804 2.50 0.64 0.125
BC-1124-5 9810276-10804 3.50 0.64 0.190 9810276-07804 2.50 0.64 0.125
BC-1125-2 9810276-11804 4.25 0.80 0.190 9810276-09804 3.00 0.80 0.190
BC-1125-4 9810276-11804 4.25 0.80 0.190 9810276-09804 3.00 0.80 0.190

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

29
 Barry-Bond Mount Series
Performance Characteristics

BC1120 Series Axial Load vs. Deflection BC1122 Series Axial Load vs. Deflection
300 1600
-3 -4
1400
250
1200
200
1000 -2

Load (lb)
Load (lb)

150 800
-1
600
100
400
50
200

0 0
0 0.01 0.02 0.03 0.04 0.05 0 0.025 0.05 0.075 0.1 0.125 0.15
Deflection (in) Deflection (in)

BC1121 Series Axial Load vs. Deflection BC1123 Series Axial Load vs. Deflection
5000 -5
1400
-4 4500

1200 4000

3500
1000
3000
Load (lb)
Load (lb)

800 -2 2500

2000
600
1500 -2

400 1000

500
200
0
0 0 0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2
0 0.02 0.04 0.06 0.08 0.1 0.12 Deflection (in)
Deflection (in)

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
Barry Controls tion assistance, call toll free:
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

30
Barry-Bond Mount Series
Performance Characteristics

BC1124 Series Axial Load vs. Deflection

6000 -5

5000

4000
Load (lb)

3000
-2

2000

1000

0
0 0.05 0.1 0.15 0.2 0.25
Deflection (in)

BC1125 Series Axial Load vs. Deflection

14000 -4

12000

10000
Load (lb)

8000
-2

6000

4000

2000

0
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4
Deflection (in)

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

31
 INDUSTRIAL CONICAL MOUNTS
Rugged, high load capacity mounts provide vibration, shock and
noise protection

Features
• One piece bonded construction

• High load capacity

• Low natural frequency

• Non-linear stiffness

• Snubbing feature on bottom

Benefits
• Consistent performance

• Low cost installation

Industrial Conical Mount Series Isolators Applications
• Fail safe when used with recommended
are designed to withstand the rigors of • Cabs/platforms
hardware • Engines
heavy-duty vehicular applications, off-road
• Generator sets
• Provides shock, vibration and noise equipment, large trucks and construction • Transmissions
attenuation equipment. They provide shock, vibration • Compressors
and noise isolation and are designed for • Fuel tanks
• Withstands high impact shock high impact applications.
• High static deflection in the axial
direction

Load Range NATURAL FREQUENCY 10-14 Hertz

• 3 styles with axial static load ratings TRANSMISSIBILITY AT RESONANCE 10

up to 1,146 lbs. per isolator RESILIENT ELEMENT Natural Rubber
STANDARD MATERIALS Sintered metal and cold-rolled steel
WEIGHT See dimensional drawings

Environmental Data
• Natural Rubber elastomer has an operating temperature range of -25˚F to +160˚F
(-30˚C to +70˚C).

32
 Industrial Conical Mount Series (27327 & 27328)
Dimensions & Performance Characteristics

27327 CONICAL MOUNT (4.25 oz.) 27328 CONICAL MOUNT (4.30 oz.)
Dimensional Drawing Dimensional Drawing

Max. Axial Load Natural Frequency Radial to Axial Bolt Grade Torque
Part Number Color Code Bolt Size
Range (lbs.) at Max. Load Stiffness Ratio SAE ISO ft·lbs N·m
27327-45 82 lbs. White 10 Hertz 2:1 3/8” or M10 8 10.9 50 76

27327-60 156 lbs. Brown 10 Hertz 2:1 3/8” or M10 8 10.9 50 76

27327-70 233 lbs. Orange 10 Hertz 2:1 3/8” or M10 8 10.9 50 76

27328-45 82 lbs. White 10 Hertz 2:1 3/8” or M10 8 10.9 50 76

27328-60 156 lbs. Brown 10 Hertz 2:1 3/8” or M10 8 10.9 50 76

27328-70 233 lbs. Orange 10 Hertz 2:1 3/8” or M10 8 10.9 50 76

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

33
 Industrial Conical Mount Series (26748)
Dimensions & Performance Characteristics

26748 CONICAL MOUNT (16.5 oz.)

Dimensional Drawing

Max. Axial Load Natural Frequency Radial to Axial Bolt Grade Torque
Part Number Color Code Bolt Size
Range (lbs.) at Max. Load Stiffness Ratio SAE ISO ft·lbs N·m
26748-45 286 lbs. White 14 Hertz 4:1 5/8” or M16 5 8.8 180 235

26748-60 562 lbs. Brown 14 Hertz 4:1 5/8” or M16 5 8.8 180 235

26748-70 750 lbs. Orange 14 Hertz 4:1 5/8” or M16 5 8.8 180 235

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
Barry Controls tion assistance, call toll free:
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

34
 Industrial Conical Mount Series (26749 & 27595)
Dimensions & Performance Characteristics

26749 CONICAL MOUNT (30 oz.) 27595 CONICAL MOUNT (29 oz.)
Dimensional Drawing Dimensional Drawing

Max. Axial Load Natural Frequency Radial to Axial Bolt Grade Torque
Part Number Color Code Bolt Size
Range (lbs.) at Max. Load Stiffness Ratio SAE ISO ft·lbs N·m
26749-45 463 lbs. White 12 Hertz 1.5:1 5/8” or M16 5 8.8 180 235

26749-60 860 lbs. Brown 12 Hertz 1.5:1 5/8” or M16 5 8.8 180 235

26749-70 1,146 lbs. Orange 12 Hertz 1.5:1 5/8” or M16 5 8.8 180 235

27595-45 463 lbs. White 12 Hertz 1.5:1 5/8” or M16 5 8.8 180 235

27595-60 860 lbs. Brown 12 Hertz 1.5:1 5/8” or M16 5 8.8 180 235

27595-70 1,146 lbs. Orange 12 Hertz 1.5:1 5/8” or M16 5 8.8 180 235

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

35
 Industrial Conical Mount Series (Snubbing Washers)
Dimensions & Selection Guide

INDUSTRIAL CONICAL MOUNT SERIES SNUBBING WASHER

ØB

The use of snubbing washers is recommended to ensure proper static

and dynamic loading of the isolator and retention of suspended equip-
ment under severe shock environments.

Snubbing washers are ordered by separate part numbers as shown in

the below table. The standard material is low-carbon steel and the
C
standard finish is zinc plate. Other materials and finishes are avail-
able upon request.

ØA Please consult with Barry Controls Applications Engineering at 1-800-

Barry-MA for more information on the use of snubbing washers.

Part Number Head Washer Part Dimensions (Inches) Tail Washer Part Dimensions (Inches)
Part Number A BB CC Part Number A B C

27327 9810276-05804 2.25 0.52 0.125 9810276-05804 2.25 0.52 0.125

27328 9810276-05804 2.25 0.52 0.125 9810276-05804 2.25 0.52 0.125

3
26748 9810276-07804 2.50 0.64 0.125 9810276-06804 2.25 0.64 0.125

26749 9810276-12804 4.60 0.64 0.25 9810276-10804 3.50 0.64 0.19

27595 9810276-12804 4.60 0.64 0.25 9810276-10804 3.50 0.64 0.19

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
Barry Controls tion assistance, call toll free:
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

36
 Industrial Conical Mount Series
Performance Characteristics

27327 & 27328 Series - Axial Load vs. Deflection 26748 Series - Axial Load vs. Deflection
350 1400
-70
-70
300 1200

250 1000
-60
-60

Load (lb)
Load (lb)

200 800

-45 600
150
-45
100 400

50 200

0 0
0 0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2 0 0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2
Deflection (in) Deflection (in)

27327 & 27328 Series - Radial Load vs. Deflection 26748 Series - Radial Load vs. Deflection
600 -70 4000
-70
3500
500
-60 3000
400
-60
2500
Load (lb)
Load (lb)

300 -45 2000

-45
1500
200
1000
100
500

0 0
0 0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2 0 0.025 0.05 0.075 0.1 0.125 0.15
Deflection (in) Deflection (in)

26749 & 27595 Series - Radial Load vs. Deflection 26749 & 27595 Series - Axial Load vs. Deflection
3000 1800
-70
1600
2500
-70
1400

2000 1200
-60
Load (lb)
Load (lb)

1000
1500 -60
800

1000 600 -45

-45
400
500
200

0 0
0 0.025 0.05 0.075 0.1 0.125 0.15 0.175 0 0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2
Deflection (in) Deflection (in)

37
 Machinery Mounts

• SLM Mount Series

• Leveling Mount Series
• 633A Mount Series
• LMS Mount Series
• 661 Mount Series
• 670 Mount Series
• 297 Mount Series
• 30005 Series Neoprene Pads
• Elastomer Springs
• Wedge Mounts
• 990/915 Mount Series
38
 SLM MOUNT SERIES
Low-profile, high capacity mounts for vibration and shock
protection.

Features
• Air spring isolator with integral heavy
wall construction

• Deflection transfers shock to outer wall

• Will not bottom out

• Continued support & isolation even

with no air pressure

Benefits
• Combined resiliency and air prevents
high static deflection, drift or
permanent set Barry SLM Series Mounts are pneumatic Applications
elastomeric mounts, ideal for applications • Industrial equipment, tools and
• Extends machinery life machinery
requiring higher deflection isolators. The
• CMM machinery
• Wide load range available SLM’s mechanical bond design incorpo- • Forging hammers
rates a positive locking system to ensure • Air compressors
• Low maintenance performance and safe operation.
Load Range
• 8 load ratings up to 19,200
lbs. per isolator
NATURAL FREQUENCY 3-5 Hertz (10 Hz. unpressurized)
TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Air and neoprene diaphragm
STANDARD MATERIALS Steel & aluminum
WEIGHT See table

Environmental Data
• Neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C to +180˚C)
and is resistant to oils, most solvents and ozone.

39
 SLM Mount Series
Dimensions & Load Ranges

SLM SERIES
Dimensional Drawing

MAX. MAX. DIMENSIONS

TYPE LOAD PRESSURE WT.
NO. LBS. PSIG "A" "B" "C" "D" "E" ("F") "G" "H" "J" "T" (LBS.)
.375-16
SLM-1A 100 60 3.00 2.38 .47 .28 2.88 2.50 1.00 .50 .125 1
UNC-2B
.500-13
SLM-3A 300 60 4.19 3.50 .53 .28 4.14 2.45 1.75 .54 .125 1.5
UNC-2B
.500-13
SLM-6A 600 80 5.12 4.25 .53 .29 4.99 3.50 2.13 .56 .125 3.25
UNC-2B
.500-13
SLM-12A 1200 80 6.88 6.00 .53 .29 6.74 3.50 3.00 .56 .125 5.5
UNC-2B
.625-11
SLM-24A 2400 80 10.00 8.50 .75 .56 9.66 3.50 4.75 .56 .188 13
UNC-2B
.625-11
SLM-48A 4800 80 13.50 12.00 .75 .56 13.31 3.50 7.50 .56 .188 26
UNC-2B
1.000-14
SLM-96A 9600 80 18.50 16.00 .88 .81 18.44 3.50 10.50 .56 .250 57
UNS-2B
1.000-14
SLM-192A 19200 80 24.00 20.00 .88 .81 24.00 3.50 15.75 .56 .250 100
UNS-2B

METRIC LOAD RANGES & DIMENSIONAL DATA

PART # LOAD RANGE (kg) A B C D E (F) G H J T Wt. (kg)
SLM-M1A 11-45 76.2 60.4 M10 12.0 7.0 73.2 63.5 25.4 12.7 3.2 0.5
SLM-M3A 34-136 106.4 88.9 M12 14.0 7.0 105.2 62.2 44.4 12.7 3.2 0.7
SLM-M6A 68-272 130.0 108.0 M12 14.0 7.0 126.7 88.9 54.1 14.2 3.2 1.5
SLM-M12A 136-545 174.8 152.4 M12 14.0 7.0 171.2 88.9 76.2 14.2 3.2 2.5
SLM-M24A 272-1090 254.0 215.9 M16 19.0 14.2 245.4 88.9 138.2 14.2 4.8 6
SLM-M48A 545-2180 342.9 304.8 M16 19.0 14.2 338.1 88.9 190.5 14.2 4.8 11.8
SLM-M96A 1090-4360 469.9 406.4 M24 22.0 20.6 468.4 88.9 266.7 14.2 6.4 26
SLM-M192A 2180-8720 609.6 508.0 M24 22.0 20.6 609.6 88.9 400.1 14.2 6.4 45.0

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

40
 SLM Mount Series
Performance Characteristics

SLM Series Dynamic Load and Approximate Deflections

Do not use 6 12 24
DYNAMIC LOAD (KILO-LBS)

Stabl-Levl under 5.5 11 22

Dynamic Forces SLM -6, -12, -24
5 10 20
in this region
4.5 9 18
0.8 2 4 8 16
0.7 1.75 3.5 7 14
0.6 1.5 3 6 12
SLM -1, -3
0.5 1.25 2.5 5 10
0.4 1 2 4 8
0.3 0.75 1.5 3 6
0.2 0.5 1 2 4
0.1 0.25 0.5 1 2
0 0 0 0 0
SLM-1 SLM-3 SLM-6 SLM-12 SLM-24 0 0.5 1 1.5 2 2.5
DEFLECTION (IN)

40 70 140
DYNAMIC LOAD (KILO-LBS)

35 60 120
30
50 100
SLM -48, -96, -192
25
40 80
20
30 60
15
20 40
10

5 10 20

0 0 0
SLM-48 SLM-96 SLM-192 0 0.5 1 1.5 2 2.5
DEFLECTION (IN)

Natural frequency vs. % Max Pressure and

% Max Load Typical Transmissibility
6 10

5
-6, -12, -24, -48, -96, -192
FREQUENCY (HZ)

Transmissibility

4
-1, -3

3 1

0 0.1
0 20 40 60 80 100
1 10 20
% MAX PRESSURE (PSIG) and
Frequency (HZ)
% MAX LOAD (LBS)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

41
 LEVELING MOUNTS
Low-profile, high capacity leveling mounts for vibration and
shock protection.

Features
• High level of shock & vibration isolation

• Full inch of elastomer for controlled

deflection

• Leveling bolt adjusts height up to a

full half inch above load

• Sturdy, reliable construction

Benefits
• Economical

• Extends machinery life

• Wide load range available

Load Range
Barry Leveling Mounts are ideal for Applications
• 7 sizes with load ratings to 13,000 protecting heavy industrial equip- • Punch Presses • Die casting machines
lbs. per isolator ment and machinery such as CNC • Milling Machines • Riveters
• Drilling Machines • Sanders
machines, punch presses, drill
• Lathes • Saws
presses, sanders, saws, injection • Grinders • Screw machines
molding and many other types of • Boring Machines • Shapers
industrial equipment. • Jig Borers • Injection Molding

NATURAL FREQUENCY 12-18 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT LM0-B + LM1-B Neoprene
LM3-B through LM9-B Nitrile
WEIGHT See load range chart

Environmental Data
• Nitrile and Neoprene elastomers have an operating temperature range of -20˚F to +180˚F
(-29˚C to +82˚C) and are resistant to oils and most solvents.

42
 Leveling Mounts
Dimensions & Performance Characteristics

LEVELING MOUNT SERIES LOAD RATING & DIMENSIONAL DATA

Part # Load Range Rating (lbs.) Base (Inches) Bolt (Inches) Weight
Outside Dia. (A) Free Height (B) Size Length

LM0-B 30-100 2 1 .25-28 1.75 4 ozs.

LM1-B 100-300 3.125 1.50 .375-24 3 1 lb. 4 ozs.
LM3-B 300-1,000 4.75 1.50 .50-13 5 2 lbs. 5 ozs.
LM5-B 1,000-4,200 6.312 1.625 .75-10 5 5 lbs. 2 ozs.
NEW! LM6-B 4,000-10,000 7.25 1.61 .75-10 5 7 lbs. 6 ozs.
LM7-B 4,000-13,000 9 2.50 1-14 8 12 lbs. 14 ozs.
LM9-B* 4,000-13,000 9 2.25 1-14 8 12 lbs. 11 ozs.

* LM-9B should be substituted for LM-7B in applications with heavy horizontal forces.
For punch press applications between 150-300 SPM, reduce load rating of each mount by 50%. Above 300 SPM, please call
Barry Controls applications engineering at 1-800-BARRY-MA.

METRIC LEVELING MOUNT SERIES LOAD RATING & DIMENSIONAL DATA

Part # Load Range Rating (lbs.) Base (Inches) Bolt (Inches) Weight
Outside Dia. (A) Free Height (B) Size Length

LM0-MB 30-100 2 1 M6-1 30 mm 4 ozs.

LM1-MB 100-300 3.125 1.50 M10-1.5 75 mm 1 lb. 4 ozs.
LM3-MB 300-1,000 4.75 1.50 M12-1.75 127 mm 2 lbs. 5 ozs.
LM5-MB 1,000-4,200 6.312 1.625 M20-2.5 127 mm 5 lbs. 2 ozs.
NEW! LM6-MB 4,000-10,000 7.25 1.61 M20-2.5 127 mm 7 lbs. 6 ozs.
LM7-MB 4,000-13,000 9 2.50 M24-3 200 mm 12 lbs. 14 ozs.
LM9-MB* 4,000-13,000 9 2.25 M24-3 200 mm 12 lbs. 11 ozs.

* LM-9B should be substituted for LM-7B in applications with heavy horizontal forces.
For punch press applications between 150-300 SPM, reduce load rating of each mount by 50%. Above 300 SPM, please call
Barry Controls applications engineering at 1-800-BARRY-MA.

43
 Optional Bolts & Bushings for Leveling Mounts
Ordering Information

OPTIONAL BOLTS WITH NUTS

Part# Comes Size (in.)
Standard w/:

2099-02000/1 3/8-16x5
100551-01000/1 LM3-B 1/2-13x5
2099-12000/1 1/2-13x8
2099-16000/1 1/2-13x10
2099-07000/1 5/8-11x5
2099-10000/1 5/8-11x8
100551-03000/1 LM5-B/LM6-B 3/4-10x5
2099-11000/1 3/4-10x8
2099-09000/1 3/4-10x10
100551-19000/1 1-14x5
100551-16000/1 LM7-B/LM9-B 1-14x8
2099-29000/1 LM0-B 1/4-28x1-3/4
2099-30000/1 LM1-B 3/8-24x3

OPTIONAL BUSHINGS FOR MOUNTS:

Part# Designed for Size (in.)
Mount:

101056-01801 LM5-B/LM6-B 3/4-10 to 3/8-16

101056-02801 LM5-B/LM6-B 3/4-10 to 1/2-13
101965-03801 LM7-B/LM-9B 1-14 to 1/2-13
101965-02801 LM7-B/LM-9B 1-14 to 5/8-11
108213-03801 LM7-B/LM-9B 1-14 to 3/4-10

44
 Metric Bolts & Bushings for Leveling Mounts
Ordering Information

METRIC BOLTS w/NUTS

Part# Designed for Size (in.)
Mount:

2099-39000/1 LM0-MB M6-1 x 1.181 (30 mm)

2099-40000/1 LM1-MB M10-1.5 x 2.953 (75 mm)
2099-44000/1 LM3-MB M12-1.75 x 5 (127 mm)
2099-43000/1 LM5-MB/LM6-MB M20-2.5 x 5 (127 mm)
2099-41000/1 LM7-MB/LM9-MB M24-3.0 x 7.874 (200 mm)

Before Leveling After Leveling

LEVELING BOLT

LOCKNUT

MACHINE FOOT

B
ELASTOMER
MOUNTING
BASE

Leveling Mount Application Performance

RPM RPM
70 100 150 200 300 500 700 1000 1500 2000 3000 5000 7000 10000 SPM
SPM

0 60 80 85 90 95 99
SHOCK ISOLATION REGION AMPLIFICATION/RESONANCE

VIBRATION ISOLATION EFFICIENCY %

45
 LMS MOUNT SERIES
Attenuated levelers designed for leveling and aligning sensitive
electronic manufacturing equipment

Features
• Neoprene elastomer bonded to steel
construction

• Corrosion resistant exposed metal parts

• Proven durability

• ANSI and metric steel threads

Benefits
• Non skid elastomer

• Protects floor or surface finish

• Extends machinery life

• 1/2” of elastomer for controlled

deflection and attenuation
LMS attenuated levelers are designed for Applications
leveling, aligning and isolating sensitive • Semiconductor equipment
• Electronic manufacturing
electronic manufacturing equipment.
equipment
LMS Series levelers feature over .5” of • Industrial machinery
neoprene elastomer bonded to the bot-
tom of the leveler to provide shock-atten-
uated, non-skid support.

NATURAL FREQUENCY 10-20 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Black Corrosion Resistant Steel
ELASTOMER COLOR Black

Environmental Data
• Neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C to +180˚C)
and is resistant to oils, most solvents and ozone.

46
 LMS Mount Series
Dimensions & Performance Characteristics

LMS SERIES
Dimensional Drawing

A
B

"C"
HEX

LMS MOUNT SERIES LOAD RATING & DIMENSIONAL DATA

Part # Load Range Rating (lbs.) Thread Units “A” “B” “C”
LMS-12042 100-400 INCH .500-13 UNC 2B 2” .750”
LMS-12044 100-400 4”
LMS-12082 200-800 INCH 2”
LMS-12084 200-800 INCH 4”
LMS-12122 400-1200 INCH 2”
LMS-12124 400-1200 INCH 4”
LMS-MI12042 100-400 METRIC M12 x 1.75 51 mm 19 mm
LMS-MI12043 100-400 84 mm
LMS-MI12082 200-800 51 mm
LMS-MI12083 200-800 84 mm
LMS-MI12122 400-1200 51 mm
LMS-MI12123 400-1200 84 mm

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

47
 633A MOUNT SERIES
Low-profile, low frequency elastomeric noise and vibration isola-
tors for medium weight industrial equipment.

Features
• Effectively isolate disturbing frequencies
as low as 900 rpm (15 Hz)

• Cold-rolled steel construction

• Optional stainless steel version

available upon request for highly
corrosive and marine applications.

• Elastomer in shear design

• Compressive to shear stiffness of 4:1

Benefits
Barry 633A Series Mounts are medium Applications
• Effectively interrupts noise transmission
paths to prevent sounding board
weight mounts normally used for verti- • Industrial equipment, tools and
machinery
amplification
cally applied loads to prevent transmis-
• Generators
sion of noise and vibration caused by • Pumps & blowers
• Extends machinery life rotation of imbalanced equipment (i.e. • HVAC equipment
generators, blowers, pumps, etc...) • Chillers
• Resistant to oils, most solvents and
ozone

• Provides up to 90% isolation efficiency

at 1,500 rpm (25 Hz)
NATURAL FREQUENCY 8 Hertz

Load Range TRANSMISSIBILITY AT RESONANCE 8:1

RESILIENT ELEMENT Neoprene
• 5 load ratings up to 260 lbs. per mount
STANDARD MATERIALS Cold Rolled Steel or Stainless Steel
WEIGHT 633A-60 through 130 = 7 oz.
633A-200 and 260 = 16 oz.

Environmental Data
• Neoprene elastomer has an operating temperature range of -40˚F to +200˚F (-40˚C to +93˚C)
and is resistant to oils, most solvents and ozone.
• Stainless Steel version is corrosion resistant for marine applications.

48
 633A Series (633A-60 through 633A-130)
Dimensions & Performance Characteristics

633A-60 through 633A-130 SERIES

Dimensional Drawing

633A-60 through 633A-130

Load vs. Deflection
240

-130

STATIC LOAD (LB)

160 -100

-60

80

0
0 0.1 0.2 0.3 0.4 0.5
DEFLECTION (IN)

633A SERIES LOAD RANGES 633A-60 through 633A-130

Part # Maximum Static Load/Isolator (lbs.) Frequency vs. Load
22
633A-60 60
633A-100 100
NATURAL FREQUENCY (HZ)

18
633A-130 130
14

NOTE: For stainless steel applications please add

“SS” to part number. Example: 10
For Stainless Steel 633A-60 order -60

as part number 633A-60SS -100

-130
6
0 40 80 120 160
LOAD (LBS)

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

49
 633A Series (633A-260)
Dimensions & Performance Characteristics

633A-200 through 633A-260 SERIES

Dimensional Drawing

633A-200 through 633A-260

Load vs Deflection
480

-260
400

STATIC LOAD (LB)

320 -200

240

160

80

0
0 0.1 0.2 0.3 0.4 0.5
DEFLECTION (IN)

633A-200 through 633A-260

Frequency vs. Load
22
633A SERIES LOAD RANGES
Part # Maximum Static Load/Isolator (lbs.)
NATURAL FREQUENCY (HZ)

18
633A-200 200
633A-260 260 14

10
NOTE: For stainless steel applications please add
“SS” to part number. Example: -200

For Stainless Steel 633A-200 order 6

-260

0 40 80 120 160 200 240 280

as part number 633A-200SS LOAD (LBS)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

50
 INDUSTRIAL MACHINERY MOUNT SERIES
Low-frequency elastomeric compression mounts for industrial
machinery.

Features
• Ideal for heavy industrial machinery

• For all types of industrial machinery

• Cold-rolled steel construction

• Provides efficient isolation for speeds

as low as 750 rpm.

• Compressive to shear stiffness of 5:1

Benefits
• Protects industrial equipment from
damage caused by extended
Barry Industrial Machinery Mounts are for Applications
shock, noise and vibration exposure
use under heavy industrial machinery for • Heavy industrial equipment,
shock, vibration and/or structure borne machinery and tools
• Extends machinery life
• Motors, pumps and generators
noise control. Barry Machinery Mounts
• Wide load range available provide efficient isolation for machine
• Low maintenance speeds as low as 750 rpm.

• Resistant to oils, most solvents and

ozone

Load Range NATURAL FREQUENCY 8-18 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
• 670 Series = 3 ratings to 1,500 lbs.
per mount RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Cold rolled steel
• 297 Series = 4 ratings to 4,400 lbs.
WEIGHT Series 661 = 2 lbs.
per mount Series 670 = 2 lbs.
Series 297 = 3 lbs.

Environmental Data
• Neoprene elastomer has an operating temperature range of -40˚F to +200˚F (-40˚C to +93˚C)
and is resistant to oils, most solvents and ozone.

51
 Machinery Mount Series (661 Series)
Dimensions & Performance Characteristics

661 SERIES
Dimensional Drawing
661 Series
Load vs. Deflection
4000

-70
3000
-55

LOAD (LBS)
-45
2000

-30

1000

0
0 0.1 0.2 0.3 0.4 0.5
DEFLECTION (IN)

661 Series
Frequency vs. Load
25
NATURAL FREQUENCY (HZ)

20
661 SERIES LOAD RANGE DATA
Part # Maximum Static Load/Isolator (lbs.)
15
661-30 300
661-45 450
10
661-55 550 -30 -45 -55 -70

661-70 700
5
0 200 400 600 800
LOAD (LBS)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

52
 Machinery Mount Series (670 Series)
Dimensions & Performance Characteristics

670 SERIES
Dimensional Drawing
670 Series
Load vs Deflection
8000
-15

7000

6000

-10
5000

LOAD (LBS)
4000

3000 -7

2000

1000

0
0 0.1 0.2 0.3 0.4 0.5 0.6
DEFLECTION (IN)

670 Series
Frequency vs. Load
30
NATURAL FREQUENCY (HZ)

25

670 SERIES LOAD RANGE DATA 20

Part # Maximum Static Load/Isolator (lbs.)

15
670-7 700
670-10 1,000 10
-7 -15
-10
670-15 1,500
5
0 400 800 1200 1600
LOAD (LBS)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

53
 Machinery Mount Series (297 Series)
Dimensions & Performance Characteristics

297 SERIES
Dimensional Drawing

297 Series
Load vs Deflection

24000 -30
-44

20000 -20

16000
LOAD (LBS)

-15
12000

8000

4000

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
DEFLECTION (IN)

297 Series
Frequency vs. Load
30
297 SERIES LOAD RANGE DATA
NATURAL FREQUENCY (HZ)

Part # Maximum Static Load/Isolator (lbs.) 25

297-15 1,500 20

297-20 2,000
15
297-30 3,000
297-44 4,400 10

-15 -20 -30 -44

5
0 800 1600 2400 3200 4000 4800
LOAD (LBS)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

54
 30005 SERIES NEOPRENE PADS
An economical solution to general shock, vibration and noise
problems in a variety of applications

Features
• Ideal for a wide range of industrial
applications

• No tools, bolting or adhesives required

for installation

• Neoprene isolator

• Pads can be easily cut to smaller sizes

• US Navy approved for Distributed

Isolation Materials in construction of
ships & submarines

Benefits Barry Neoprene Pads are designed for use Applications

• Protects industrial equipment from as a general purpose shock, vibration and • Drill Presses
noise attenuator or where the advantages • Microscopes
damage caused by extended • Printing Equipment
shock, noise and vibration exposure of elastomeric characteristics are required • Riveters
but a specific type of isolator has not been • Sanders and Saws
• Easily installed or relocated called out. • Work Benches

• Can be used in a broad range of

applications where moderate
shock, vibration and noise reduction
is required NATURAL FREQUENCY 20 - 35 Hertz
TRANSMISSIBILITY AT RESONANCE 8:1
• Low maintenance
RESILIENT ELEMENT Neoprene
• Resistant to oils, most solvents and STANDARD MATERIALS Neoprene
ozone
WEIGHT 4” x 4” square = 2 oz.

Load Range
• Provides drift resistance up to 50 psi

Environmental Data
• Neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C to +85˚C)
and is resistant to oils, most solvents, salt spray and ozone.

55
 Neoprene Pad Series
Dimensions & Performance Characteristics

NEOPRENE PAD SERIES

Dimensional Drawing

A
2"
2" A
.31
THK.

PART # “A” (Inches) Description

30005-4 4 One 4” x 4” square pad

30005-12 12 One 12” x 12” square pad

30005-1 24 One 24” x 24” square pad

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

56
 ELASTOMER SPRING SERIES
Low cost, compact, all elastomer mounts for vibration and noise
control.

Features
• All elastomer isolators

• Very slight pressure set

• Minimal wear through abrasion

• Excellent resistance to oil and ozone

• Stackable

Benefits
• Quieter and safer operation than steel

• Eliminates die damage caused by

When compared to other types of springs,
shattered springs Applications
Barry Elastomer Springs have proven to • Punching Dies
• Longer stroke at same load be the safest, most efficient and reliable • Stamping Dies
compression material for punching, • Drawing Dies
Load Range stamping and drawing dies. Elastomer
• Load range up to 15,000 lbs. Springs can be used in other applications
requiring exceptionally high energy stor-
age in a small area.

Since Barry Controls introduced elastomer

springs, a steadily increasing number of
metal fabricators in the aircraft, automo-
bile, appliance and electronics industries
are making use of their specific advan-
tages which are: higher loads, increased
durability, better performance, freedom
from maintenance and a very long life.

Environmental Data
• Neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C to +85˚C)
and is resistant to oils, most solvents, salt spray and ozone.

57
 Elastomer Spring Series
Dimensions & Load Range Data

ELASTOMER SPRING SERIES

Dimensional Drawing Part Number A B L R D T

ES-3500 .63” .25” 15/32” 436 .17” 72

ES-3501 5/8” 353 .22” 77
ES-3502 25/32” 292 .27” 80
ES-3503 1” 236 .34” 83
ES-3510 .787” .33” 5/8” 610 .22” 133
ES-3511 25/32” 482 .28” 132
ES-3512 1” 381 .35” 133
ES-3512 1.25” 287 .44” 126
ES-3520 1.00” .41” 25/32” 787 .28” 215
B A ES-3521 1” 598 .35” 209
ES-3522 1.25” 524 .44” 229
ES-3523 1.562” 440 .55” 241
ES-3530 1.25” .53” 1.25” 1031 .44” 451
ES-3531 1.578” 828 .55” 471
ES-3532 1.969” 651 .69” 456
ES-3533 2.50” 517 .87” 452
ES-3540 1.56” .53” 1.25” 1790 .44” 783
ES-3541 1.578” 1434 .55” 816
ES-3542 1.969” 1148 .69” 804
ES-3543 2.50” 931 .87” 815
ES-3544 3.156 744 1.10” 830
ES-3550 2.00” .66” 1.25” 2959 .44” 1295
ES-3551 1.578” 2411 .55” 1371
ES-3552 1.969” 1852 .69” 1296
ES-3553 2.50” 1482 .87” 1297
ES-3554 3.156” 1192 1.10” 1330
L ES-3555 3.937” 950 1.38” 1330
ES-3560 2.50” .66” 1.25” 4565 .44” 1997
ES-3561 1.578” 3650 .55” 2076
ES-3562 1.969” 2830 .69” 1981
ES-3563 2.50” 2286 .87” 2000
ES-3564 3.156” 1809 1.10” 2018
ES-3565 3.937” 1468 1.38” 2055
ES-3566 4.922” 1375 1.72” 2406

ES-3570 3.15” .83” 1.25” 9088 .44” 3926

ES-3571 1.578” 7038 .55” 4003
ES-3572 1.969” 5768 .69” 4038
ES-3573 2.50” 4572 .87” 4000
ES-3574 3.156” 3485 1.10” 3889
ES-3575 3.937” 2567 1.38” 3594
ES-3576 4.922” 2010 1.72” 3518

Dimensions and data are subject to change without notice. ES-3580 3.94” .83” 1.25” 15216 .44” 6657
ES-3581 1.578” 10427 .55” 5930
For technical, design, or application assistance, call toll free: ES-3582 1.969” 8466 .69” 5926
ES-3583 2.50” 6435 .87” 5631
ES-3584 3.156” 4648 1.10” 5186
1-800-BARRY MA ES-3585 3.937” 3440 1.38” 4816
ES-3586 4.922” 2540 1.72” 4445

ES-3590 4.92” 1.06” 1.25” 33815 .44” 14794

ES-3591 1.578” 22810 .55” 12973
ES-3592 1.969” 14817 .69” 10372
ES-3593 2.50” 10584 .87” 9261
ES-3594 3.156” 7138 1.10” 7965
ES-3595 3.937” 5680 1.38” 7952
ES-3596 4.922” 4022 1.72” 7039
ES-3597 6.312 3102 2.21” 6853

R = Spring Rate, lbs./inch deflection +/- 20%

D = Maximum recommended deflection -35%L
T = Approximate total load at maximum deflection +/- 20%
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

58
 WEDGE MOUNTS
Precision machine leveling and dependable machine support
from a wedge-action leveling jack

Features
• Grooved top
• Provides leveling adjustment on all
planes

• Low profile

• Corrosion resistant finish

• Lift capacities from 3,000-30,000 lbs.

Benefits
• Permits oils and liquids to run out NEW!
Barry Wedge Mounts provide solid, easily
• 3-piece version compensates up to 5˚
for uneven floors adjustable leveling support for machinery
and production equipment. These mounts
Applications
• Improves machinery stability compensate for uneven floors and will
• Punch Presses
dramatically increase equipment efficien- • Milling Machines
• Reduces both vibration and noise
cy, stability and service life. When used • Lathes
when used with felt mounting pad
with optional felt pad, reduces both vibra- • CNC Machinery
• Low maintenance tion and noise. The three-piece version’s • Die Casting Machines
self-aligning base compensates for uneven • Conveyor Systems
• Provides a solid, easily adjustable floors up to 5˚.
support for industrial machinery
OPTIONAL RESILIENT ELEMENT Felt
Load Range STANDARD MATERIALS Cast Iron Black Oxide Finish
• Four versions with load ranges from WEIGHT See Table on Page 12
3,000 to 30,000 lbs.

Environmental Data
• Felt resilient element is 90% wool bonded by heat and is solvent resistant and stable in oil.
Acid/Alkali resistant

59
 Wedge Mounts
WM Series Dimensions & Performance Characteristics

2 PIECE WM SERIES WEDGE MOUNTS 3 PIECE WM SERIES WEDGE MOUNTS

Light to Medium Applications Medium to Heavy Applications

C
C

A A

B
B

Pad Pad
(Thk.) (Thk.)

3,000 lbs. RATED LIFT CAPACITY 15,000 lbs. RATED LIFT CAPACITY
Part# A B C Pad Weight Rise Part# A B C Pad Weight Rise
WM-3 1.125” 3.5” 6” 5 lbs. 1/4” WM-15 2.375” 3.5” 6.75” 11 lbs. 3/16”
WM-3-025 1.125” 3.5” 6” 1/4” 5 lbs. 1/4” WM-15-025 2.375” 3.5” 6.75” 1/4” 11 lbs. 3/16”
WM-3-050 1.125” 3.5” 6” 1/2” 5 lbs. 1/4” WM-15-050 2.375” 3.5” 6.75” 1/2” 11 lbs. 3/16”
WM-3-075 1.125” 3.5” 6” 3/4” 5 lbs. 1/4” WM-15-075 2.375” 3.5” 6.75” 3/4” 11 lbs. 3/16”

9,000 lbs. RATED LIFT CAPACITY 20,000 lbs. RATED LIFT CAPACITY

Part# A B C Pad Weight Rise Part# A B C Pad Weight Rise

WM-9 2.25” 3.5” 6” 11 lbs. 3/8” WM-20 2.75” 3.5” 6.75” 14 lbs. 1/4”

WM-9-025 2.25” 3.5” 6” 1/4” 11 lbs. 3/8” WM-20-025 2.75” 3.5” 6.75” 1/4” 14 lbs. 1/4”

WM-9-050 2.25” 3.5” 6” 1/2” 11 lbs. 3/8” WM-20-050 2.75” 3.5” 6.75” 1/2” 14 lbs. 1/4”

WM-9-075 2.25” 3.5” 6” 3/4” 11 lbs. 3/8” WM-20-075 2.75” 3.5” 6.75” 3/4” 14 lbs. 1/4”

30,000 lbs. RATED LIFT CAPACITY

Part# A B C Pad Weight Rise

WM-30 2.75” 3.5” 6.75” 15 lbs. 1/4”

60
Wedge Mount Series
Optional Felt Mounting Pad Information

PERCENTAGE
The use of felt Mounting Pads in conjunction VIBRATION
with Barry Wedge Mounts is recommended to REDUCTION

reduce the damaging effects of vibration. The Felt 1/4” Pad 43%
pads are resistant to oil, grease and acids. They
resist breakdown under loads and over time. Felt 1/2” Pad 74%

Felt 3/4” Pad 80%

Felt Mounting Pads reduce the transmission of
internal machine noises to the building structure
and reduce transmitted vibrations from one
machine to the other. In many cases, they
reduce the need for anchor bolts by stopping
machine creep.

Available in various thicknesses, the vibration

capacity of felt is exceptionally high, as demon-
strated by the following data:

Barry Wedge Mount with

Optional Felt Mounting Pad

The lower surface of wedge is specially

contoured to float laterally within the
concave base unit, automatically com-
pensating for uneven floor conditions
up to 5˚ of slope.

61
 990/915 MOUNT SERIES
Low-frequency, captive, industrial-type mounts for vibration and
structure-borne noise isolation

Features
• Captive, fail-safe design

• Natural rubber elements

• Meet MIL standards

• Eyelet reinforced mounting holes

Benefits
• Reduce installation costs

• No special foundations required

• Isolate shock & vibration and reduce

structure-borne noise 990 and 915 mounts are for applica- Applications
tions under light to medium weight • Phonographic Equipment
• Minimize sounding board effects industrial machinery requiring noise, • Light motors (Fractional HP)
• Scales
shock and vibration isolation and are
• Reduce maintenance costs • Cameras
ideal for applications where structure- • Optical Equipment
Load Range borne noise and sounding board effects • Vacuum Pumps
must be minimized.
• 990 = 7 sizes with load ratings from
1.8 - 30 lbs. per isolator

• 915 = 6 sizes with load ratings from NATURAL FREQUENCY 10 Hertz

15 - 200 lbs. per isolator
TRANSMISSIBILITY AT RESONANCE
RESILIENT ELEMENT Natural Rubber (Standard)
STANDARD MATERIALS Zinc-Plated Cold Rolled Steel
WEIGHT 5.3 oz.

Environmental Data
• Natural Rubber elastomer has an operating temperature range of -40˚F to +180˚F. Optional
Neoprene elastomer is available for resistance to ozone and/or oil environments and has an operating
temperature range of -20˚F to +180˚F.

62
 990/915 Mount Series
Dimensions & Load Ranges

990 MOUNTS 915 MOUNTS

Dimensional Drawing Dimensional Drawing

990 MOUNTS 915 MOUNTS

LOAD RATINGS LOAD RATINGS
Part # Load Range - lbs. Part # Load Range - lbs.
990-3 1.8 - 3 915-25 15 - 25
990-5 3-5 915-40 25 - 40
990-7 4.5 - 7 915-60 35 - 60
990-10 5 - 10 915-90 50 - 90
990-15 8 - 15 915-150 70 - 150
990-20 12 - 20 915-200 120 - 200
990-30 19 - 30

990/915 Series Mounts Application Performance

RPM RPM
70 100 150 200 300 500 700 1000 1500 2000 3000 5000 7000 10000 SPM
SPM

0 60 80 85 90 95 99
SHOCK ISOLATION REGION AMPLIFICATION/RESONANCE

VIBRATION ISOLATION EFFICIENCY %

63
 Cup Style Mounts

• Cupmount Series (1000-4000)

• S Mount Series (S22/S44/S64)
• L Mount Series (L21/L44/L64)
• H Mount Series (H44/H64)
• T Mount Series (T22/T44/T64/T94)
• B Mount Series (B21/B22/B44/B64)

64
 CUPMOUNT SERIES (1000-4000)
A universal set of mounts for protection from severe shock envi-
Features
ronments, high-frequency vibration and structure borne noise.
• Fail-safe, all-attitude isolators

• Gradually increasing stiffness under

compression prevents bottoming out

• Zinc plated steel construction

• Provides isolation for frequencies

above 40 Hz at max. load

• Compact, low-profile design

Benefits Applications
Barry Cupmounts combine protection
• Provides protection in all directions against severe shock with efficient vibra- • Vehicular electronics
• Motors & pumps
• Provides effective reduction of structure tion isolation characteristics at frequencies
• Fans & blowers
borne noise above 40 Hertz. They can be mounted in • Transformers
any orientation for protection of sensitive • Shipboard equipment
Load Range electronic, electrical and mechanical • Aircraft/missile electronics
equipment from high impact shocks. • Racking systems
• Series 1000 = 4 load ratings to • Random vibration environments
100 lbs./mount
NATURAL FREQUENCY 20-45 Hertz
• Series 2000 = 4 load ratings to
TRANSMISSIBILITY AT RESONANCE 4 max. (Hi-Damp Silicone)
250 lbs./mount 6 max. (Universal Compound)
10 max. (Natural Rubber)
• Series 4000 = 4 load ratings to
RESILIENT ELEMENT Hi-Damp Silicone, Universal Black
900 lbs./mount Elastomer, Natural Rubber

• Series 3000 = 4 load ratings to STANDARD MATERIALS Zinc plated steel

1,800 lbs./mount WEIGHT Series 1000 = 6 oz.
Series 2000 - 1lb.
Series 3000 = 10 lbs.
Series 4000 = 4 lbs.

Environmental Data
• Barry Hi-Damp® Elastomer provides the most damping, an exceptionally high operating
temperature range of -67˚F to +300˚F (-55˚C to +150˚C) and is resistant to ozone, fungus and
other contaminants.
• Universal Black Elastomer is ideal when moderate damping is required and where oil immersion
is encountered. Meets MIL-M-17185 (environmental) and MIL-STD-167 (vibration) specifications.
The operating temperature range is -65˚F to +180˚F (-54˚C to +85˚C).
• Natural rubber provides high fatigue life. Operating range is -40˚F to +180˚F (-40˚C to +85˚C).

65
 1000 Series Cupmount
Dimensions & Performance Characteristics

SERIES 1000
Dimensional Drawing SERIES C, UC & NC 1000
Load vs. Deflection
500
7
450

400

STATIC LOAD (LBS)

350

5
5
0

0
101
103
105

101
7
300
250

200
150

100
50

0
0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (IN)

SERIES C1000 and UC1000 SERIES NC1000

Load vs. Natural Frequency Load Vs. Natural Frequency
60 50
55
45
50
NATURAL FREQUENCY (HZ)
NATURAL FREQUENCY (HZ)

45 40
C
C

&

40
&

UC
UC

10
C

35
NC
10

35
&

50
35

10
UC

NC
NC

NC

50
1
C

10
10

10
01
&

30
15
10
5

35
UC

30
10
10

25

25
20

15 20
3 10 20 40 60 100 5 10 20 40 60 100
LOAD (LBS) LOAD (LBS)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

66
 2000 Series Cupmount
Dimensions & Performance Characteristics

SERIES 2000
Dimensional Drawing SERIES C, UC & NC 2000
Load vs. Deflection
1000

900

800

STATIC LOAD (LBS)

700

600

20
60

40
209

20
20

20
500

400

300

200

100

0
0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (IN)

SERIES C2000 and UC2000 SERIES NC2000

Load vs. Natural Frequency Load Vs. Natural Frequency
60 50
55
50 45
NATURAL FREQUENCY (HZ)
NATURAL FREQUENCY (HZ)

45
40
40
C

35
C

35
&
&

UC
C

NC

NC
NC

NC
UC
&

20
20

20

20
20

20
UC

90

30
C

60

20

40

90
60
&

20

30
UC

40
20

25
20

25
20

15 20
10 20 40 60 100 200 300 10 20 40 60 100 200
LOAD (LBS) LOAD (LBS)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

67
 3000 Series Cupmount
Dimensions & Performance Characteristics

SERIES 3000 SERIES C, UC 3000

Dimensional Drawing
Load vs. Deflection
5000

4500

4000

25 175
330
STATIC LOAD (LBS)
3500

3
0
350

31
3000

2500

2000

1500

1000

500

0
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4
DEFLECTION (IN)

SERIES C3000 and UC3000

Load vs. Natural Frequency
50
45
40
NATURAL FREQUENCY (HZ)

35

30
C
&
25 U
C
35
C C 00
& &
20 C UC UC
& 31 33
UC 75 00
31
25
15

10
70 100 200 400 1000 2000
LOAD (LBS)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

68
 4000 Series Cupmount
Dimensions & Performance Characteristics

SERIES 4000
Dimensional Drawing
SERIES C, UC & NC 4000
Load vs. Deflection
10000

9000

8000

STATIC LOAD (LBS)

7000

5
0

00
430

413
420

41
6000

5000

4000

3000

2000
1000

0
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4
DEFLECTION (IN)

SERIES C4000 and UC4000 SERIES NC4000

Load vs. Natural Frequency Load Vs. Natural Frequency
50 50
45
45
40
NATURAL FREQUENCY (HZ)
NATURAL FREQUENCY (HZ)

35 40
30
35
C
25
NC

NC

NC

C
NC

&
C

C & UC
41

41

42
&

43

& U 43
U

C
00

35

00

00

U
C

C 42 00
41

20 41 00 30
35

00

15 25

10 20
40 60 100 200 400 1000 50 100 200 400 600 1000
LOAD (LBS) LOAD (LBS)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

69
 Cupmount Series
How to order Cupmounts

The part numbering system of the Barry Cupmount

PREFIX METAL ELASTOMER
series includes coded designations of the metal
parts, elastomer, size, load rating and attachment NC Cold-rolled steel Hi-damp Silicone
core characteristics. Please note, aluminum parts UC (zinc plated finish) Universal
are available for 1000 & 2000 series only. C Natural Rubber
NL Aluminum Hi-damp Silicone
The letter prefix preceding a part number desig-
nates the metal and elastomer. The first number
of the four digit part number designates the size, Typical Barry Controls Cupmount Part Number:
or series of the Cupmount.
N C - 1 015 - T 4
The suffix designates a through core or tapped
Elastomer: (Hi-Damp)
core, and core diameter. The absence of the letter
“T” indicates a through core. The number indi- Metal Parts: (Steel)
cates the core diameter bolt size. Refer to dimen-
Size: (Series 1000)
sional drawings for standard core diameters.
Load Rating: (See chart below)

To avoid overstressing attachment bolts, core Tapped Core: (Absence of letter “T” indicates through core)
diameter cannot be interchanged from series to
series. Core Diameter in Sixteenths (4/16”)

CUPMOUNT SERIES LOAD RATINGS

Part # Maximum Load Range - lbs. Load Range - lbs.
(Vibration Applications) (Shock Applications)
1010 20 8-14
Dimensions and data are subject to change without notice.
1015 30 14-24
For technical, design, or application assistance, call toll free: 1035 70 24-38
1050 100 38-60
1-800-BARRY MA
2020 50 15-30
2040 100 30-50
2060 150 50-80
2090 250 80-105

4100 250 65-100

4135 400 100-155
4200 650 155-200
4300 900 200-285

3125 600 80-120

3175 800 120-185
3300 1400 185-285
3500 1800 285-530

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

70
 S-MOUNT SERIES (S22/S44/S64)
Low-frequency variable air-damped mounts for a high level of
vibration isolation.

Features
• Low resonant transmissibility

• 2 stage air-damping

• Low natural frequency isolation

• Axial to radial stiffness ratio of 4:1

• Fail safe construction

Benefits
• Up to 90% isolation efficiency with
inputs as low as 40 Hz.

• Variable air-damping provides increasing Barry S-Mounts are air-damped isolators Applications
isolation efficiency in high-frequency and are designed to provide the highest • Military & commercial airborne
degree of vibration isolation for sensitive equipment
regions, even when input excursions • Computers and storage devices
become small commercial and military airborne equip- • Optical devices & instrumentation
ment. S-Mounts are particularly effective • Lasers
Load Range at isolating low level vibration. • Clinical diagnostic equipment

• S22 = 6 load ratings from .3 - 3

lbs. per mount

• S44 = 7 load ratings from .25 - 9 NATURAL FREQUENCY 7-10 Hertz vertical

lbs. per mount TRANSMISSIBILITY AT RESONANCE 3.5 Max. at sea level

Approx. 4.3 at 50,000 feet
• S64 = 7 load ratings from 2.0 - 35 RESILIENT ELEMENT Air-damped spring
lbs. per mount
STANDARD MATERIALS Varies with model
WEIGHT S22 = 0.5 oz.
S44 = 2.5 oz.
S64 = 5.0 oz.

Environmental Data
• Silicone Air Chambers and Snubbers have operating temperature ranges of -67˚F to +300˚F
(-55˚C to +150˚C).
• Mounts meet all applicable standards of MIL-C-172 and are fungus and oil resistant.

71
 S Mount Series (S22)
Dimensions

S22 SERIES
Dimensional Drawing

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:

1-800-BARRY MA

S22 LOAD RANGES S MOUNT SERIES

Part # Static Load Range Cutaway Drawing
/Isolator (lbs.)
S22-AA-0.5 0.3 - 0.5 CORE
SNUBBER BALLOON CAP
S22-AA-0.8 0.5 - 0.8
S22-AA-1.1 0.6 - 1.1 BALLOON CLAMP
S22-AA-1.5 0.9 - 1.5 LOAD BEARING
S22-AA-2.2 1.3 - 2.2 SPRING DAMPER
S22-AA-3.0 2.2 - 3.0 BALLOON
CUP and
BASEPLATE SPRING
SEAT

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

72
 S Mount Series (S44/S64)
Dimensions & Load Range Data

S44 SERIES
Dimensional Drawing

S44 LOAD RANGES

Part # Static Load Range
/Isolator (lbs.)
S44-AA-0.5 & BA-0.5 0.25-0.5
S44-AA-1.0 & BA-1.0 0.5-1.0
S44-AA-3.0 & BA-3.0 1.5-3.0
S44-AA-4.5 & BA-4.5 2.5-4.5
S44-AA-7.0 & BA-7.0 4.0-7.0
S44-AA-9.0 & BA-9.0 6.5-9.0

.141 ± .016
[ 3.6 ± 0.4 ]

S64 SERIES
Dimensional Drawing

S64 LOAD RANGES

Part # Static Load Range
/Isolator (lbs.)
S64-AA-4.5 & BA-4.5 3.0-4.5
S64-AA-6.0 & BA-6.0 3.5-6.0
S64-AA-10.0 & BA-10.0 6.0-10.0
S64-AA-12.5 & BA-12.5 9.5-12.5
S64-AA-20.0 & BA-20.0 12.5-20.0
S64-AA-25.0 & BA-25.0 19.0-25.0

.156 ± .016
[ 4.0 ± 0.4 ]

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

73
 L-MOUNT SERIES (L21/L22/L44/L64)
Low-frequency, highly damped mounts for a high level of vibra-
tion isolation.

Features
• Marking of mounts with military
designations available on special order

• Aluminum construction

• Axial to radial stiffness of 4:1

• For base mounting only

• Fail safe construction

Benefits
• Isolation performance maintained in
attitudes up to 10˚ from the horizontal Barry L-Mounts increase equipment relia- Applications
• Low ratio of horizontal and vertical bility and extend component life by pro- • Avionic equipment in propeller
viding isolation for frequencies as low as driven aircraft
stiffness which holds transmissibility • Sensitive instrumentation and
in rocking modes to unusually 10 Hertz and exhibiting low transmissibil- medical equipment
low magnitudes ity at resonance (below 2.5) with .60” • Stationary applications where
double amplitude vibratory input. cost effective, low frequency
Load Range isolation is required

• L21/L22 = 7 load ranges from

.35 - 4 lbs. per mount NATURAL FREQUENCY 7-10 Hertz

• L44 = 7 load ratings from .25 - 10 TRANSMISSIBILITY AT RESONANCE 2.5

lbs. per mount
RESILIENT ELEMENT Friction damped spring
• L64 = 7 load ratings from 2.0 - 40 STANDARD MATERIALS Aluminum
lbs. per mount
WEIGHT L21 = .031 lbs.
L22 = .031 lbs.
L44 = .098 lbs.
L64 = .226 lbs.

Environmental Data
• Operating temperature ranges of -67˚F to +250˚F (-55˚C to +120˚C).
• Meets vibration and shock requirements of MIL-C-172C.
• L44 and L64 isolators are known as “MS” (Military Standard) mounts and appear on QPL’s.

74
 L Mount Series (L21/L22)
Dimensions & Performance Characteristics

L21 Dimensional Drawing L22 Dimensional Drawing

L21 & L22 Load vs. Natural Frequency L21-BA MOUNT

HEIGHT OF ALUMINUM CORE (Inches) (“H”)
MAX RATED LOAD
Compressed .219 (min.)
Under min. load 0.50 (approx.)
Extended .703 (max.)
LOAD (LBS)

20 MIL INPUT

L22-BA MOUNT
60 MIL INPUT
HEIGHT OF ALUMINUM CORE (Inches) (“H”)
Compressed .719 (min.)
MIN RATED LOAD
Under min. load 1.00 (approx.)
4 6 8 10 12 14 16
Extended 1.172 (max.)
FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

75
 L Mount Series (L44)
Dimensions & Performance Characteristics

L44 Dimensional Drawing

L44 MOUNT L44-AA L44-BA

HEIGHT OF ALUMINUM CORE (Inches) (“H”)
Compressed (min.) .975 1.131
Under min. load (approx.) 1.375 1.562
Extended (max.) 1.632 1.788

L44 Load vs. Natural Frequency

MAX RATED LOAD

20 MIL INPUT
LOAD (LBS)

60 MIL INPUT

MIN RATED LOAD

4 6 8 10 12 14 16
FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

76
 L Mount Series (L64)
Dimensions & Performance Characteristics

L64 Dimensional Drawing

L64 MOUNT L64-AA+CA L64-BA+DA

HEIGHT OF ALUMINUM CORE (Inches) (“H”)
Compressed (min.) .982 1.148
Under min. load (approx.) 1.406 1.562
Extended (max.) 1.540 1.706

L64 Load vs. Natural Frequency

MAX RATED LOAD

L64 Series Mount

20 MIL INPUT
LOAD (LBS)

80 MIL INPUT

MIN RATED LOAD

6 7 8 9 10 11 12
FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

77
 L Mount Series (L21/L22/L44/L64)
Load Range & MS Specifications
LOAD RANGES (L21/L22/L44 SERIES) L64 Series Load Range, “H” Dimension and MS Designation
*Military designation load ranges are tighter than Barry Standard
Part # Static Load/Isolator
Part # *Load Range (lbs.) *Military Designation “H”
L64-AA-4 1.91-2.59 MS91418-2BAL 1.405
L21 & L22-BA-0.5 0.38-0.54 lbs. L64-BA-4 1.91-2.59 MS91418-2BAS 1.571
L64-CA-4 1.91-2.59 MS91418-2BAD 1.405
L21 & L22-BA-0.7 0.44-0.75 lbs. L64-DA-4 1.91-2.59 MS91418-2BAH 1.571

L21 & L22-BA-1.0 0.56-1.00 lbs. L64-AA-4 2.0-4.5 MS91418-2AAL 1.399

L64-BA-4 2.0-4.5 MS91418-2AAS 1.565
L21 & L22-BA-1.3 0.88-1.30 lbs. L64-CA-4 2.0-4.5 MS91527-2AAD 1.399
L64-DA-4 2.0-4.5 MS91527-2AAH 1.565
L21 & L22-BA-2.0 1.20-2.00 lbs.
L64-AA-4 2.55-3.45 MS91418-2BBL 1.352
L21 & L22-BA-3.0 1.70-3.00 lbs. L64-BA-4 2.55-3.45 MS91418-2BBS 1.518
L64-CA-4 2.55-3.45 MS91527-2BBD 1.352
L21 & L22-BA-4.0 2.50-4.00 lbs. L64-DA-4 2.55-3.45 MS91527-2BBH 1.518

L44-AA-.5 & BA-.5 0.25-.50 lbs. L64-AA-4 3.0-5.0 MS91418-2ABL 1.390

L64-BA-4 3.0-5.0 MS91418-2ABS 1.556
L44-AA-1 & BA-1 0.50-1.00 lbs. L64-CA-4
L64-DA-4
3.0-5.0
3.0-5.0
MS91527-2ABD
MS91527-2ABH
1.390
1.556
L44-AA-2 & BA-2 1.0-2.0 lbs. L64-AA-4 2.55-3.45 MS91418-2BBL 1.352
L64-BA-4 2.55-3.45 MS91418-2BBS 1.518
L44-AA-3 & BA-3 1.50-3.0 lbs. L64-CA-4 2.55-3.45 MS91527-2BBD 1.352
L64-DA-4 2.55-3.45 MS91527-2BBH 1.518
L44-AA-4 & BA-4 2.0-4.0 lbs.
L64-AA-4 3.40-4.60 MS91418-2BCL 1.365
L44-AA-5 & BA-5 2.5-5.0 lbs. L64-BA-4 3.40-4.60 MS91418-2BCS 1.561
L64-CA-4 3.40-4.60 MS91527-2BCD 1.365
L44-AA-10 & BA-10 5.0-10.0 lbs. L64-DA-4 3.40-4.60 MS91527-2BCH 1.561

L64-AA-4, BA-4, CA-4 & DA-4 2.0-4.0 lbs. L64-AA-4 4.67-6.33 MS91418-2BDL 1.392
L64-BA-4 4.67-6.33 MS91418-2BDS 1.558
L64-AA-6, BA-6, CA-6 & DA-6 3.0-6.0 lbs. L64-CA-4 4.67-6.33 MS91527-2BDD 1.392
L64-DA-4 4.67-6.33 MS91527-2BDH 1.558
L64-AA-10, BA-10, CA-10 & DA-10 4.5-10.0 lbs.
L64-AA-10 4.5-10.0 MS91418-2ACL 1.395
L64-AA-12, BA-12, CA-12 & DA-12 6.25-12.5 lbs. L64-BA-10 4.5-10.0 MS91418-2ACS 1.561
L64-CA-10 4.5-10.0 MS91527-2ACD 1.395
L64-AA-16, BA-16, CA-16 & DA-16 9.0-16.0 lbs. L64-DA-10 4.5-10.0 MS91527-2ACH 1.561

L64-AA-20, BA-20, CA-20 & DA-20 10.0-20.0 lbs. L64-AA-10

L64-BA-10
4.67-6.33
4.67-6.33
MS91418-2BDL
MS91418-2BDS
1.392
1.558
L64-AA-40, BA-40, CA-40 & DA-40 20.0-40.0 lbs. L64-CA-10
L64-DA-10
4.67-6.33
4.67-6.33
MS91527-2BDD
MS91527-2BDH
1.392
1.558

L64-AA-10 6.37-8.63 MS91418-2BEL 1.362

L64-BA-10 6.37-8.63 MS91418-2BES 1.528
L64-CA-10 6.37-8.63 MS91527-2BED 1.362
L64-DA-10 6.37-8.63 MS91527-2BEH 1.528

L64-AA-12 6.25-12.50 MS91418-2ADL 1.372

L64-BA-12 6.25-12.50 MS91418-2ADS 1.538
L64-CA-12 6.25-12.50 MS91527-2ADD 1.372
L64-DA-12 6.25-12.50 MS91527-2ADH 1.538

L64-AA-12 8.50-11.50 MS91418-2BFL 1.339

L64-BA-12 8.50-11.50 MS91418-2BFS 1.505
Dimensions and data are subject to change without notice. L64-CA-12 8.50-11.50 MS91527-2BFD 1.339
L64-DA-12 8.50-11.50 MS91527-2BFH 1.505
For technical, design, or application assistance, call toll free: L64-AA-16 9.0-16.0 1.323
L64-BA-16 9.0-16.0 1.489
1-800-BARRY MA L64-CA-16 9.0-16.0 1.323
L64-DA-16 9.0-16.0 1.489

L64-AA-20 10.0-20.0 MS91418-2AEL 1.391

L64-BA-20 10.0-20.0 MS91418-2AES 1.557
L64-CA-20 10.0-20.0 MS91527-2AED 1.391
L64-DA-20 10.0-20.0 MS91527-2AEH 1.557

L64-AA-20 11.48-15.53 MS91418-2BGL 1.366

L64-BA-20 11.48-15.53 MS91418-2BGS 1.532
L64-CA-20 11.48-15.53 MS91527-2BGD 1.366
L64-DA-20 11.48-15.53 MS91527-2BGH 1.532

L64-BA-20 15.30-20.70 MS91418-2BHL 1.406

L64-DA-20 15.30-20.70 MS91527-2BHD 1.406

L64-AA-40 20.0-40.0 1.400

L64-BA-40 20.0-40.0 1.566
L64-CA-40 20.0-40.0 1.400
L64-DA-40 20.0-40.0

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

78
L-Mount Series (L21/L22/L44/L64)
Load Ranges & MS Designations

79
 H-MOUNT SERIES (H44/H64)
Low-frequency, friction damped mounts for high level vibration
isolation and shock protection in rotary wing aircraft.

Features
• Axial to radial stiffness ratio of 4:1

• Friction damped spring

• For base mounting only

• Fail safe construction

Benefits
• Ideally suited for protecting equipment
in helicopters or similar environments
where high-amplitude, low frequency
vibration is predominant
Barry H-Mounts are ideally suited for pro- Applications
• Increased equipment reliability and tecting equipment in helicopters or similar • Avionic equipment in propeller
extended component life driven aircraft
environments where high amplitude, low
• Equipment in environments
frequency vibration is predominant.
Load Range where high amplitude, low
frequency vibration is present
• H44 = 7 ratings from .25-10 lbs.
per mount

• H64 = 7 load ratings from 2.0-40

lbs. per mount NATURAL FREQUENCY 7-10 Hertz
TRANSMISSIBILITY AT RESONANCE 2.0 Max.

RESILIENT ELEMENT Friction damped spring

STANDARD MATERIALS Aluminum
WEIGHT H44 = 1.63 oz.
H64 = 3.56 oz.

Environmental Data
• Operating temperature ranges of -67˚F to +250˚F (-55˚C to +120˚C).
• Designed for the rotary wing vibration requirements of MIL-STD-810B.
• Performs in attitudes up to 10˚ from horizontal.
• Meets vibration and shock requirements of Mil-C-172C.

80
 H-Mount Series (H44)
Dimensions & Performance Characteristics

H44 Dimensional Drawing

LOAD RANGES
Part # Static Load Range (lbs.)
H44-AA-1/2 & BA-1/2 0.25 - 0.5
H44-AA-1 & BA-1 0.5 - 1.0
H44-AA-2 & BA-2 1.0 - 2.0
H44-AA-3 & BA-3 1.5 - 3.0
H44-AA-4 & BA-4 2.0 - 4.0
H44-AA-6 & BA-6 4.0 - 6.0
H44-AA-10 & BA-10 5.0 - 10.0

H44 Load vs Natural Frequency

MAX RATED LOAD

20 MIL INPUT
LOAD (LBS)

80 MIL INPUT

MIN RATED LOAD

4 6 8 10 12 14 16
FREQUENCY (HZ)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

81
 H-Mount Series (H64)
Dimensions & Performance Characteristics

H64 Dimensional Drawing

LOAD RANGES
Part # Static Load Range (lbs.)
H64-AA-4 & BA -4 2-4
H64-AA-6 & BA-6 3-6
H64-AA-10 & BA-10 5-10
H64-AA-15 & BA-15 9-15
H64-AA-20 & BA-20 14-20
H64-AA-30 & BA-30 18-30
H64-AA-40 & BA-40 25-40

H64 Load vs Natural Frequency Typical Transmissibility (H44 & H64 Series)
MAX RATED LOAD
5
20 MIL INPUT
TRANSMISSIBILITY

1
LOAD (LBS)

0.1

80 MIL INPUT

MIN RATED LOAD 0.01

0.001
1 10 100 500
6 7 8 9 10 11 12
FREQUENCY (HZ) FREQUENCY (HZ)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

82
 T-MOUNT SERIES (T22/T44/T64/T94)
General purpose, all-attitude isolators for mounting aircraft,
shipboard or vehicular equipment.

Features
• Fail safe, all-attitude isolators

• Meets crash safety requirements of

MIL-E-5400 (30g 11 millisecond
half-sine pulse shock)

• Axial to radial stiffness of 1:1

• Isolates under sustained loadings of

up to 5g’s

Benefits
• Provides efficient vibration isolation at
frequencies above 40 hertz Barry T-Mounts are general purpose isola- Applications
tors for mounting aircraft, shipboard or • Shipboard electronics
• Increased equipment reliability and • Missile electronics
vehicular equipment in any attitude. They
extended component life • Racking systems
are ideally suited for applications requiring • Aircraft & mobile applications
Load Range high frequency vibration isolation with low • Avionics & electronics
resonant amplification.
• T22 = 4 ratings to 5 lbs. per mount

• T44 = 3 ratings to 20 lbs. per mount

NATURAL FREQUENCY 15-40 Hertz
• T64 = 3 ratings to 80 lbs. per mount
TRANSMISSIBILITY AT RESONANCE 4.0 Max.
• T94 = 2 ratings to 150 lbs. per mount
RESILIENT ELEMENT Hi-Damp Silicone
STANDARD MATERIALS Varies with model
WEIGHT T22 = 1.1 oz.
T44 = 2.8 oz.
T64 = 5.3 oz.
T94 = 14.2 oz.

Environmental Data
• Hi-Damp Silicone exceeds the temperature requirements of MIL-E-5400 (-67˚F to +300˚F
or -55˚C to +150˚C) operational and (-100˚F to +300˚F or -75˚C to +150˚C) storage.
• Meets MIL-E-5400 requirements for resistance to ozone, humidity, salt spray and fungus.
• Meets MIL-S-901 lightweight Grade B Navy high impact shock test requirements.

83
 T-Mount Series (T22)
Dimensions & Performance Characteristics

T22 Dimensional Drawing

T22 SERIES “H” DIMENSION

Compressed .91
Approx. Free 1.22
Max. Extended 1.56

T22 SERIES LOAD RANGE DATA

Part # Max. Load/Isolator
T22-AB-1 1 lb.
T22-AB-2 2 lbs.
T22-AB-3 3 lbs.
T22-AB-5 5 lbs.

T22 Performance Data

Load vs. Natural Frequency Load vs. Deflection
6 80
-5
-5 70
60
LOAD (LBS)

LOAD (LBS)

4
50
-3
-3
40
30 -2
2 -2
-1 20
-1
10

0 0
15 20 25 30 35 40 45 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28
FREQUENCY (HZ) DEFLECTION (INCHES)

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

84
 T-Mount Series (T44)
Dimensions & Performance Characteristics

T44 Dimensional Drawing

T44 SERIES “H” DIMENSION

Compressed 1.19
Approx. Free 1.50
Max. Extended 1.88

T44 SERIES LOAD RANGE DATA

Part # Max. Load/Isolator
T44-AB-10 10 lbs.
T44-AB-15 15 lbs.
T44-AB-20 20 lbs.

T44 Performance Data

Load vs. Natural Frequency Load vs. Deflection
25 300
-20

20 250
LOAD (LBS)

LOAD (LBS)

-15
200
15
150 -10
10
100
-20
5 -15
50
-10
0 0
15 20 25 30 35 40 45 0 0.05 0.1 0.15 0.2
FREQUENCY (HZ) DEFLECTION (INCHES)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

85
 T-Mount Series (T64)
Dimensions & Performance Characteristics

T64 Dimensional Drawing

T64 SERIES “H” DIMENSION

Compressed 1.25
Approx. Free 1.62
Max. Extended 1.94

T64 SERIES LOAD RANGE DATA

Part # Max. Load/Isolator
T64-AB-35 35 lbs.
T64-AB-50 50 lbs.
T64-AB-80 80 lbs.
.156 ± .016
[ 4.0 ± 0.4 ]
APPROX

T64 Performance Data

Load vs. Natural Frequency Load vs. Deflection
1400
80
70 1200 -80

60 1000
LOAD (LBS)
LOAD (LBS)

50 800 -50
40
600
-80 -35
30
400
20 -50
-35 200
10
0
0
15 20 25 30 35 40 0 0.05 0.1 0.15 0.2 0.25 0.3

FREQUENCY (HZ) DEFLECTION (INCHES)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

86
 T-Mount Series (T94)
Dimensions & Performance Characteristics

T94 Dimensional Drawing

T94 SERIES “H” DIMENSION

Compressed 2.13
Approx. Free 2.54
Max. Extended 3.06

T94 SERIES LOAD RANGE DATA

Part # Max. Load/Isolator
T94-AB-110 110 lbs.
T94-AB-150 150 lbs.

T94 Performance Data

Load vs. Natural Frequency Load vs. Deflection
175 2400
-150
-150
150 2100
-110 -110
125 1800
LOAD (LBS)

LOAD (LBS)

100 1500
1200
75
900
50
600
25
300
0 0
15 17.5 20 22.5 25 27.5 0 0.05 0.1 0.15 0.2 0.25 0.3
FREQUENCY (HZ) DEFLECTION (INCHES)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

87
 B-MOUNT SERIES (B22/B44/B64/B43)
All-attitude, highly damped mounts for protection of equipment
from vibration, shock during steady-state acceleration.

Features
• Low resonant transmissibility

• Metal spring with friction damping

• All-attitude mounting

• Aluminum or stainless steel outer cup

and core

• Fail safe construction

• Axial to radial stiffness of 1:1

Benefits
• Continuous isolation even under loads Barry B-Mounts provide shock and vibra- Applications
of up to 5g’s tion isolation for avionic equipment in high • Avionics in high
performance aircraft. They feature low performance aircraft
• Interchangeable with MIL size • Electronics in transportable
resonant transmissibility and isolate high shelters
counterparts frequency vibration without snubbing dur- • Mobile ground equipment
ing high “g” maneuvers.
Load Range
• B21/22 = 4 ratings to 3 lbs.
per mount
NATURAL FREQUENCY 15-30 Hertz
• B43/44 = 5 ratings to 10 lbs. TRANSMISSIBILITY AT RESONANCE 3.0 Max.
per mount
RESILIENT ELEMENT Friction damped spring
• B64 = 4 ratings to 40 lbs. per mount
STANDARD MATERIALS Varies w/model
WEIGHT See Tables

Environmental Data
• Operating temperature range -85˚F to +250˚F (-65˚C to +120˚C).
• Meets strength, corrosion resistance and environmental requirements of MIL-E-5272, MIL-E-5400
and MIL-STD-810.

88
 B-Mount Series (B21)
Dimensions & Performance Characteristics
B21 Dimensional Drawing

B21 SERIES “H” DIMENSION

Compressed .266
Approx. Free .547
Max. Extended .813

1.17
(SEE TABLE)

B21 Load vs. Natural Frequency

20 Mil Input 80 Mil Input

4 4
-3
3.5 3.5
-3
3 3
LOAD (LBS)

-2
LOAD (LBS)

2.5 2.5
-1 -2
2 2
-1
1.5 1.5

1 1
-0.5 -0.5
0.5 0.5

0 0
12 16 20 24 28 32 36 40 12 16 20 24 28 32 36 40
FREQUENCY (HZ) FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

89
 B-Mount Series (B22)
Dimensions & Performance Characteristics

B22 Dimensional Drawing

B22 SERIES “H” DIMENSION

Compressed .891
Approx. Free 1.172
Max. Extended 1.438

B22 Load vs. Natural Frequency

20 Mil Input 80 Mil Input

4 4
-3
3.5 3.5
-3
3 3
LOAD (LBS)

-2
LOAD (LBS)

2.5 2.5
-1 -2
2 2
-1
1.5 1.5

1 1
-0.5 -0.5
0.5 0.5

0 0
12 16 20 24 28 32 36 40 12 16 20 24 28 32 36 40
FREQUENCY (HZ) FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

90
 B-Mount Series (B43)
Dimensions & Performance Characteristics

B43 Dimensional Drawing

B43 SERIES “H” DIMENSION

Compressed .344
Approx. Free .672
Max. Extended .953

B43 Load vs. Natural Frequency

20 Mil Input 80 Mil Input

16 16 -10
-10
14 14

12 12
LOAD (LBS)

-6
LOAD (LBS)

10 10

8 -6
8
-4
6 6
-4
4 4 -2
-2
2 -1
2 -1

0 0
10 15 20 25 30 35 40 45 10 15 20 25 30 35 40 45
FREQUENCY (HZ) FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

91
 B-Mount Series (B44)
Dimensions & Performance Characteristics

B44 Dimensional Drawing

B44 SERIES “H” DIMENSION

Compressed 1.328
Approx. Free 1.578
Max. Extended 1.858
.141 ± .016
[ 3.6 ± 0.4 ]

B44 Load vs. Natural Frequency

20 Mil Input 80 Mil Input

16 16 -10
-10
14 14

12 12
LOAD (LBS)

-6
LOAD (LBS)

10 10

8 -6
8
-4
6 6
-4
4 4 -2
-2
2 -1
2 -1

0 0
10 15 20 25 30 35 40 45 10 15 20 25 30 35 40 45
FREQUENCY (HZ) FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

92
 B-Mount Series (B64)
Dimensions & Performance Characteristics

B64 Dimensional Drawing

B64 SERIES “H” DIMENSION

Compressed 1.312
Approx. Free 1.531
Max. Extended 1.828

B64 Load vs. Natural Frequency

20 Mil Input 80 Mil Input

45 45
-40
-40
40 40
35 35
LOAD (LBS)
LOAD (LBS)

-20
30 30
-20
25 25
20 20
15 15 -10
-10
10 10
-5 -5
5 5
0 0
10 15 20 25 30 35 40 45 10 15 20 25 30 35 40 45
FREQUENCY (HZ) FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

93
 B-Mount Series
Load Range (B-Series) & “H” Dimensions
CUP TYPE
Flat Core Dimple Core Height Max. S.A Def. Weight Max. Static Load
B22-BC-0.5 Not Available 1.17” .25” .05 lbs. 0.5 lbs.
B22-BC-1.0 1.0 lbs.
B22-BC-2.0 2.0 lbs.
B22-BC-3.0 3.0 lbs.

B44-EB-1 B44-DB-1 1.0 lbs.

B44-EB-2 B44-DB-2 2.0 lbs.
B44-EB-4 B44-DB-4 1.58” .25” .16 lbs. 4.0 lbs.
B44-CB-6 B44-BB-6 6.0 lbs.
B44-CB-10 B44-BB-10 10.0 lbs.

B64-CB -5 B64-BB-5 5.0 lbs.

B64-CB-10 B64-BB-10 1.53” .25” .44 lbs. 10.0 lbs.
B64-CB-20 B64-BB-20 20.0 lbs.
B64-CB-40 B64-BB-40 40.0 lbs.

Dimensions and data are subject

PLATE TYPE to change without notice.
B21-BC-0.5 Not Available .55” .25” .05 lbs. 0.5 lbs.
B21-BC-1.0 1.0 lbs. For technical, design, or applica-
B21-BC-2.0 2.0 lbs. tion assistance, call toll free:
B21-BC-3.0 3.0 lbs.
1-800-BARRY MA
B43-EB -1 B43-DB-1 1.0 lbs.
B43-EB-2 B43-DB-2 .67” .25” .16 lbs. 2.0 lbs.
B43-EB-4 B43-DB-4 4.0 lbs.
B43-CB-6 B43-DB-6 6.0 lbs.
B43-CB-10 B43-DB-10 10.0 lbs.

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

94
High Deflection Mounts

• ME Mount Series (ME-100/ME-500)

• TT-A Mount Series
• TT-B Mount Series
• HTTA Mount Series
• VHC Mount Series
• 2K Mount Series (2K1/2K2/2KS)
• GB530 Isolators
• Barry-Flex Isolators

95
 ME-MOUNT SERIES (ME100/ME500)
An effective isolation solution for installations where instrumen-
tation is subjected to rugged environmental conditions.

Features
• Compact, low-profile design

• Available in two sizes

• High deflection capability and compact

size for light loads

• Axial to radial stiffness ratio 2:1

Benefits
• Can be used in tandem for extended
deflection capability

Load Range
ME Series Mounts are low frequency, free Applications
• ME-100 = 5 load ratings to 10 standing isolators which are environmen- • Militarized computer installations
lbs. per mount (such as disk drives)
tally resistant and operate over a wide
• Vehicular mounted equipment
• ME-500 = 5 load ratings to 10 temperature range. They are for use in • Avionics
lbs. per mount isolating delicate instrumentation in • Lightweight electrical equipment
mobile, military or office equipment appli-
cations.

NATURAL FREQUENCY 12-20 Hertz

TRANSMISSIBILITY AT RESONANCE 10 Max.
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Aluminum
WEIGHT ME-100 = 0.2 oz.
ME-500 = 0.5 oz.

Environmental Data
• Operating temperature range is -20˚F to +180˚F (-30˚C to +82˚C).
• Resistant to oil, most solvents and ozone.
• Butyl and Barry LT available on special order where high damping and extended temperature
performance characteristics are required.

96
 ME100 Mount Series
Dimensions & Load Range Specifications

ME100 SERIES ME-100 Axial Load vs. Deflection

Dimensional Drawing
40

35
-5
30
-4

LOAD (LBS)
25
20
-3
15
-2
10
-1
5

0
0 0.1 0.2 0.3
DEFLECTION (IN)

ME-100 Radial Load vs. Deflection

12.5
-5 -4
10
LOAD (LBS)

7.5
-3
-2
5
-1

2.5

0
0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (IN)

ME100 SERIES LOAD RATINGS

Part # Maximum Load (lbs.) Axial Natural Frequency Color Code
Axial Compression Radial

ME100-1 2.50 1.40 14 Hz Blue

ME100-2 3.75 1.90 14 Hz Red
ME100-3 4.25 2.75 16 Hz Green
ME100-4 6.50 3.75 16 Hz Yellow
ME100-5 10.00 6.25 16 Hz White

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

97
 ME500 Mount Series
Performance Characteristics

ME500 SERIES ME-500 Axial Load vs. Deflection

Dimensional Drawing
30
-5
25

20

LOAD (LBS)
-4
15
-3

10 -2

5 -1

0
0 0.1 0.2 0.3 0.4 0.5 0.6
DEFLECTION (IN)

ME500 Radial Load vs. Deflection

20
-5 -4
-3
16
-2
LOAD (LBS)

12

8
-1

0
0 0.1 0.2 0.3 0.4 0.5 0.6
DEFLECTION (IN)

ME500 SERIES LOAD RATINGS

Part # Maximum Load (lbs.) Axial Natural Frequency Color Code
Axial Compression Radial

ME500-1 2.00 0.75 12 Hz Blue

ME500-2 3.00 1.50 12 Hz Red
ME500-3 5.00 2.25 12 Hz Green
ME500-4 7.50 4.00 12 Hz Yellow
ME500-5 10.00 5.50 12 Hz White

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

98
 TTA MOUNT SERIES
Mid-frequency, high deflection mounts for protection from severe
vibration and shock.

Features
• Available in Silicone or Neoprene

• Axial to radial stiffness of 1:1

• Mid frequency isolation

• Aluminum construction

Benefits
• Attenuates a 15g, 11 millisecond half-
sine shock to 6g’s

• Survives a 30g, 11 millisecond half-

sine crash safety shock
The TT-A mount is a mid frequency isolator Applications
• Lightweight & durable which combines a low profile and large • Ruggedized disk drives
deflection capability in order to provide • Electronics for rotary wing and
Load Range both shock and vibration protection. The
propeller driven aircraft
• Mobile ground equipment
• 3 load ratings to 15 lbs. per mount TT-A is ideal for applications where high • Other applications where high
amplitude vibration inputs are expected or amplitude, low frequency
where large shock deflections are needed. vibration is present

NATURAL FREQUENCY 12-20 Hertz

TRANSMISSIBILITY AT RESONANCE 4.0 Max. (Hi-Damp Silicone)
10.0 Max. (Neoprene)
RESILIENT ELEMENT Hi-Damp Silicone or Neoprene
STANDARD MATERIALS Aluminum
(Grounding Strap Beryllium Copper)

WEIGHT 2.0 oz.

Environmental Data
• Hi-Damp Silicone operating temperature range is -67˚F to +300˚F (-55˚C to +150˚C) and is
resistant to fungus and ozone.
• Neoprene operating temperature range is -20˚F to +180˚F (-30˚C to +82˚C) and is resistant
to oil and ozone.

99
 TTA Mount Series
Dimensions & Performance Characteristics

TTA SERIES OPTIONAL RESTRAINING STRAP

Dimensional Drawing Dimensional Drawing - Part #880749-02804

4.00

Ø.196
.188 3.63 .250

.500

R.344 (R.281 OPT.)(BOTH ENDS) Ø.170

*Please note, mounts are not inherently fail-safe.

They may require the use of a suitable restraining device.

TTA SERIES ORDERING INFORMATION

PART # LOAD RANGE (lbs.)
Neoprene Silicone
TTN-A-1 TT-A-1 5-7
TTN-A-2 TT-A-2 7-10
TTN-A-3 TT-A-3 10-15

TTA Load vs. Deflection TTNA Load vs. Deflection TTA & TTNA Natural Frequency vs. Load
70 70 20
-3 -2 -3
60 60 18
-2
FREQUENCY (HZ)

50 50 16
LOAD (LBS)

LOAD (LBS)

40 40
-1 -1 14
30 30 -3
-1 -2
20 20 12
10 10

0 0 10
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5 4 10 15
DEFLECTION (IN) DEFLECTION (IN) LOAD (LBS)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

100
 TTB MOUNT SERIES
Mid-frequency, low profile, high deflection mounts for protection
from severe vibration and shock.

Features
• Available in Silicone or Neoprene

• Axial to radial stiffness of 2.3:1

• Mid frequency isolation

• Aluminum construction

Benefits
• Attenuates a 15g, 11 millisecond half-
sine shock to 10g’s

• Attenuates a 30g, 11 millisecond half-

sine crash safety shock to 16 g’s
Barry TT-B Mounts are mid-frequency iso- Applications
• Lightweight lators with a large deflection capacity, • Shipping containers
designed to give both shock and vibration • Airborne electronics & racking
Load Range isolation protection. The standard
• Shipboard equipment
• Mobile mounted equipment
• 3 load ratings to 30 lbs. per mount Neoprene version is for applications where • Other applications where high
temperature extremes are not a factor. amplitude, low frequency
vibration is present

NATURAL FREQUENCY 25-35 Hertz

TRANSMISSIBILITY AT RESONANCE 4.0 Max. (Hi-Damp Silicone)
10.0 Max. (Neoprene)
RESILIENT ELEMENT Hi-Damp Silicone or Neoprene
STANDARD MATERIALS Aluminum
(Grounding Strap Beryllium Copper)

WEIGHT 6.5 oz.

Environmental Data
• Hi-Damp Silicone operating temperature range is -67˚F to +300˚F (-55˚C to +150˚C) and is
resistant to fungus and ozone.
• Neoprene operating temperature range is -20˚F to +180˚F (-30˚C to +82˚C) and is resistant
to oil and ozone.

101
 TTB Mount Series
Dimensions & Performance Characteristics

TTB SERIES OPTIONAL RESTRAINING STRAP

Dimensional Drawing Dimensional Drawing - Part #8810015-12804

.397
Ø.201
.375

.750

5.25
6.12

*Please note, mounts are not inherently fail-safe.

They may require the use of a suitable restraining device.

ORDERING INFORMATION
PART # LOAD RANGE (lbs.)
Neoprene Silicone Neoprene Silicone
TTN-B-1 TT-B-1 12 10
TTN-B-2 TT-B-2 20 18
TTN-B-3 TT-B-3 30 25

TTB Axial Load vs. Deflection TTB Radial Load vs. Deflection TTB Series Natural Frequency vs. Load
500 600 40
-3
-3
400 500 35
FREQUENCY (HZ)

-2
400
LOAD (LBS)

LOAD (LBS)

300 30
-2 300
200
-1 -1
200 25
-2 -3
100
100 -1

0 0 20
0 0.2 0.4 0.6 0.8 1 0 0.5 1 1.5 5 10 20 30
DEFLECTION (IN) DEFLECTION (IN) LOAD (LBS)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

102
 HTTA MOUNT SERIES
Low-frequency, highly damped mounts for high level shock and
vibration isolation.

Features
• Low natural frequency (10-13 Hertz)

• Axial to radial stiffness is 1:1.4

• Aluminum construction

Benefits
• Will not degrade in performance when
subjected to a 15g, 11 millisecond half-
sine shock input

• Will not fail under a 30g, 11 millisecond

half sine shock input
Barry HTTA-Series Mounts are low fre- Applications
• Lightweight
quency isolators with a large deflection • Mounting equipment in helicopter
• Fungus and ozone resistant capacity to provide both vibration and environments (meets MIL-STD-
810C requirements)
shock protection. They are designed to • Other applications where a large
Load Range meet the requirements of MIL-STD-810C deflection capacity is required
• 3 load ratings from 5 - 20 lbs. for mounting electronic equipment in heli-
per mount copter environments.

NATURAL FREQUENCY 10-13 Hertz

TRANSMISSIBILITY AT RESONANCE 4.0 Max.
RESILIENT ELEMENT Hi-Damp Silicone
STANDARD MATERIALS Aluminum
(Grounding Strap Beryllium Copper)

WEIGHT 4 oz.

Environmental Data
• Hi-Damp Silicone elastomer has an operating temperature range of -67˚F to +300˚F
(-55˚C to +150˚C ) and is fungus and ozone resistant.

103
 HTTA Mount Series
Dimensions & Performance Characteristics

HTTA SERIES OPERATING RANGE DATA

HTTA SERIES
Dimensional Drawing Part # Axial Load Static Deflection Resonant Natural
Range (lbs.) Range (lbs.) Frequency Range (Hz.)

HTTA-1 5-8 .028”-.055” 13-10

HTTA-2 7-13 .021”-.061” 13-10
HTTA-3 13-20 .028”-.062” 13-10

OPTIONAL RESTRAINING STRAP

Dimensional Drawing - Part #885368-12804

6.00

Ø.196

.250 .250

R.50 (BOTH ENDS) Ø.281

*Please note, mounts are not inherently fail-safe.

They may require the use of a suitable restraining device.

HTTA Load vs. Deflection HTTA Typical Transmissibility

80 10
-3
TRANSMISSIBILITY

60
1
LOAD (LBS)

-2
40

-1 0.1
20

0 0.01
0 0.2 0.4 0.6 0.8 5 10 100
DEFLECTION (IN) FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

104
 VHC MOUNT SERIES
High deflection shock and vibration isolators for medium-weight
sensitive equipment.

Features
• Buckling design

• Steel construction

• Compression to shear stiffness ratio 2:1

• Designed to carry static loads in the

axial direction, but can accommodate
dynamic inputs in the radial direction

• Attenuates 18” freefall shock input to

approximately 12g’s

Benefits
Barry VHC-Series mounts are special pur- Applications
• Large deflection capacity provides
pose, mid-frequency isolators designed to • Ground vehicle electronics
superior shock attenuation • Shipboard equipment
protect sensitive equipment when high level
• Shipping containers
• Can be used as stabilizers for tall shock and vibration inputs are expected. • Equipment installed in
equipment packages Typical applications include electronic equip- transportable shelters
ment installed in mobile equipment subject-
• Maximum loads apply when mount ed to off-road environments.
will be subjected to an 18” freefall.
Larger loads can be accommodated
for less severe shock inputs.
NATURAL FREQUENCY 12-20 Hertz
Load Range TRANSMISSIBILITY AT RESONANCE 5.0 Max. (Barry LT Compound)
10.0 Max. (Neoprene)
• 4 load ratings to 145 lbs. per mount
RESILIENT ELEMENT Barry LT Compound or Neoprene
STANDARD MATERIALS Steel (Grounding Strap Beryllium Copper)
WEIGHT 4 lbs.

Environmental Data
• Barry LT (low-temperature) Compound, which is ideal for military applications, operates between
-67˚F and +180˚F (-55˚C to +82˚C) and is resistant to fungus and ozone.
• Neoprene has an operating temperature range of -20˚F to +180˚F (-30˚C to +180˚C)
and resists oil and ozone.

105
 VHC Mount Series
Dimensions & Performance Characteristics

LOAD RATINGS
VHC SERIES
Part # Max. Axial Load Rating (lbs.)
Dimensional Drawing Neoprene Barry LT

VHC-1A VHC-5A 45
VHC-2A VHC-6A 70
VHC-3A VHC-7A 100
VHC-4A VHC-8A 145

Compression Load vs. Deflection

1000

750 -4A
-8A

LOAD (LBS)
500 -3A
COMPRESSION

-7A
-2A
-6A
250
-1A
-5A

0
0 0.5 1 1.5 2
DEFLECTION (IN)

Shear Load vs. Deflection

SHEAR 1250

1000
-4A
LOAD (LBS)

-8A
750
OPTIONAL RESTRAINING STRAP -3A
-7A -2A
Dimensional Drawing - Part #8810090-01804 500 -6A

250 -1A
.032
4.31 -5A

0
0 1 2 3
R 2.0 ±.030
DEFLECTION (IN)

Natural Frequency vs. Load

.81 20
Ø.390 thru Ø.265

18 -6A -7A
.75
1.50 -2A -3A
16
FREQUENCY (HZ)

-5A
.90 .69 -1A

14 -8A
*Please note, mounts are not inherently fail-safe. -4A

They may require the use of a suitable restraining device. 12

10
15 20 40 70 100 150
LOAD (LBS)

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

106
 2K MOUNT SERIES
Two stage shock mount and vibration isolator for severe dynam-
ic environments such as shipboard and ground vehicles.

Features
• Combines shock and vibration isolation
in a single isolator

• Protects from vibratory inputs as low as

10 Hz

• Designed for base mounting only

• Wide load range for most applications

Benefits
• Elastomeric shock attenuating elements
have as much as 1 inch of available
deflection (1.5 inches for 2KS) Barry 2K-Series mounts offer the advan- Applications
tage of superior vibration and shock pro- • Naval sonar equipment
• Limit shock transmissions to 20g’s • Shipboard electronics
tection for a wide range of loads in a sin-
when subjected to a five foot hammer • Radar installations
gle compact unit. These isolators are ideal • Computer & video displays
blow per MIL-S-901
for isolating naval sonar equipment, ship-
• Many custom versions are available. board electronics and communications.
Consult factory for more information
Vibration Element Shock Element
Load Range NATURAL FREQUENCY 6-8 Hertz vertical 15 Hertz vertical
• 2K1 Series = 4 load ratings from TRANSMISSIBILITY AT RESONANCE 2.5 Max. 10 Max.
1 - 10 lbs. per mount RESILIENT ELEMENT Friction damped Neoprene or
spring Nitrile elastomer
• 2K2 Series = 8 load ratings from
STANDARD MATERIALS Varies with model
4 - 90 lbs. per mount Standard Beryllium Copper Grounding Strap

• 2KS Series for loads from 250 - WEIGHT See Dimensional Drawings
6,000 lbs.
Environmental Data
• 2K1 and 2K2 isolators are for use with lightweight MIL-S-901 applications.
• 2KS systems are for use with medium weight MIL-S-901 applications.
• Isolators and systems met MIL-STD-16400 inclination, temperature, humidity and salt spray
specifications, MIL-STD-167 vibration tests and MIL-M-17185 environmental and oil immersion tests.
• Operating temperature range is -20˚F to +180˚F (-30˚C to +82˚C).
• Isolators are unaffected by humidity, sand, dust and fungus.

107
 2K Series (2K1)
Dimensions & Performance Characteristics

* PLEASE NOTE: On 2K1 and 2K2 Isolators,

-AA part number indicates a short core for use
with dimpled mounting trays. -BA part number
indicates a long core for attachment directly
to equipment.

2K1 Series Mounts = 10 oz.

2K1 Load vs. Deflection

2K1 LOAD RATINGS
100
-10

80
PART # STATIC LOAD RANGE
-6 /ISOLATOR (LBS.)
LOAD (LBS)

60
-2, -4 2K1-AA-2 & BA-2 1-2
40
2K1-AA-4 & BA-4 2-4
20

-4
2K1-AA-6 & BA-6 4-6
-2
0
0 0.4 0.8 1.2 2K1-AA-10 & BA-10 6-10
DEFLECTION (IN)

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555

108
 2K Series (2K2)
Dimensions & Performance Characteristics

2K2 Series Mounts = 1.6 lbs. 2K2 LOAD RATINGS

PART # STATIC LOAD RANGE

/ISOLATOR (LBS.)

2K2-AA-6 & BA-6 4-6

2K2-AA-10 & BA-10 6-10
2K2-AA-16 & BA-16 10-16
2K2-AA-25 & BA-25 16-25
2K2-AA-40 & BA-40 25-40
2K2-AA-60 & BA-60 40-60
2K2-AA-75 & BA-75 60-75
2K2-AA-90 & BA-90 75-90

2K2 Load vs. Deflection (0 to .6 inches)

200

150
-90
LOAD (LBS)

-75
-60
100
-40

-25

50
-16

-6 -10
0
0 0.2 0.4 0.6
DEFLECTION (IN)

* PLEASE NOTE: On 2K1 and 2K2 Isolators,

2K2 Load vs. Deflection (0.6 to 1.4 inches)
-AA part number indicates a short core for use
with dimpled mounting trays. -BA part number 800
-75, -90, -60

indicates a long core for attachment directly 600

LOAD (LBS)

to equipment. 400
-25, -40

200 -6, -10, -16

0
0.6 0.8 1 1.2 1.4
DEFLECTION (IN)

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

109
 2K Mount Series Lightweight Stabilizer
Dimensional Drawing

LIGHTWEIGHT STABILIZER 21335-5 DIMENSIONAL DRAWINGS

2K EQUIPMENT INTERFACE 2K BULKHEAD INTERFACE

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

110
 GB530 MOUNT SERIES
Shock & vibration isolators protect naval equipment installed in
high impact and shock loading environments.

Features
• Steel construction

• Protects from vibratory inputs as low as

7 Hz

• Available in butyl upon special order

Benefits
• Capable of large deflections under
shock inputs

• Available in natural rubber with a

transmissibility at resonance of
approximately 10 Barry GB530 Series mounts provide large Applications
deflections under shock input and effec- • Naval sonar equipment
• Excellent attenuation of structure borne • Shipboard electronics
tive attenuation of structure-borne noise in
noise in the range of 12.5-10,000 Hz • Radar installations
the range of 12.5 - 10,000 Hertz. • Protection of sensitive equipment
Load Range GB530 isolators are ideal for shipboard and weaponry during
applications. transportation
• Load range to 1,322 lbs. per isolator

NATURAL FREQUENCY As low as 7 Hertz

TRANSMISSIBILITY AT RESONANCE 10
RESILIENT ELEMENT Natural rubber
STANDARD MATERIALS Steel
WEIGHT 7.45 lbs.

Environmental Data
• Natural rubber has an operating temperature range of -25˚F to +160˚F (-32˚C to +71˚C).

111
 GB530 Mount Series
Dimensions & Performance Characteristics

GB530 SERIES (dimensions in mm) Isolator Type Min. load Max. load
Natural Rubber
GB530 (NR1) 16.5 lbs. 165 lbs.
GB530 (NR2) 33 lbs. 330 lbs.
GB530 (NR3) 55 lbs. 551 lbs.
GB530 (NR4) 88 lbs. 881 lbs.
GB530 (NR5) 132 lbs. 1,322 lbs.
Butyl
GB530 (B2) 22 lbs. 220 lbs.
GB530 (B3) 26 lbs. 275 lbs.
GB530 (B4) 37 lbs. 374 lbs.
GB530 (B5) 44 lbs. 440 lbs.

- (M12) = Tapped top hole

- (M20) = Tapped top hole
- (FM) = Ferrous metal parts
- (NM) = Non magnetic parts
- (S) = Captivation strap
- (O) = Without captivation strap

GB530 - NR - M20 - NM - O Typical GB530 Part #

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

112
 BARRY-FLEX ISOLATOR SERIES (GBCO1/GBCO2)
Low-profile, high-deflection elastomeric shock & vibration isola-
tors protect sensitive military equipment in harsh environments.

Features
• Aluminum alloy construction

• Meets requirements of MIL-STD-810

and DEF.STAN.07-55

• Low-profile design

• Unique cooling feature

Benefits
• Static deflection of .04” under
maximum load

• Special elastomer formulation meets

Barry-Flex isolators are designed for harsh Applications
damping and high deflection character-
environments where high-amplitude • Electronic packages, computers
istics of current defense standards & communications equipment
shock and vibration are encountered.
installed within military vehicles
• Up to .47” dynamic deflection available, Their rugged design and high deflection
despite low profile capabilities are ideal for this type of envi-
ronment.
• Elastomer will not overheat during
prolonged dynamic excursions

Load Range NATURAL FREQUENCY 15 Hertz at maximum load

• GBCO1 Series available in 3 load TRANSMISSIBILITY AT RESONANCE 4.0
ratings from 8.8 to 17.6 lbs. RESILIENT ELEMENT Barry LT
• GBCO2 Series available in 4 load
STANDARD MATERIALS Aluminum alloy
ratings from 17.6 to 40 lbs.
WEIGHT GBCO1 = 1.45 oz.
GBCO2 = 2.68 oz.

Environmental Data
• Operating temperature range of -40˚F to 180˚F (-40˚C to +82˚C).
• Can be stored at temperatures as low as -67˚F (-55˚C).
• Unique cooling feature ensures that elastomer does not overheat during prolonged
dynamic excursions.

113
 Barry-Flex Isolator Series
Dimensions & Performance Characteristics

GBCO1 SERIES (dimensions in mm) GBCO2 SERIES (dimensions in mm)

Load vs. Deflection Load vs. Deflection

75 300
-4 -5
-4

-3
50 200
LOAD (LBS)

LOAD (LBS)

-3

-2 -2

25 100

0 0
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
DEFLECTION (IN) DEFLECTION (IN)

Load vs. Natural Frequency Load vs. Natural Frequency

20
10

6
10
LOAD (KG)
LOAD (KG)

4
-5
-4
-4
2 -3
-3

-2 -2
2
1
15 20 25 30
15 20 25 30
FREQUENCY (Hz)
FREQUENCY (Hz)

Part Numbers Load

Part Numbers Load
GBCO2-2-TM6-L or GBCO2-2-TM8-L 7
GBCO1-2-TM6-L 4 GBCO2-3-TM6-L or GBCO2-3-TM8-L 10
GBCO1-3-TM6-L 6 GBCO2-4-TM6-L or GBCO2-4-TM8-L 15
GBCO1-4-TM6-L 8 GBCO2-5-TM6-L or GBCO2-5-TM8-L 20

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

114
Low Profile Mounts

• 6300/6550 Series
• E Series (E21/E22)
• 5200 Series
• 6820 Series
• Multiaxis Mounts
115
 6300/6550 MOUNT SERIES
Small, low-profile, all-attitude elastomeric mounts for vibration
and shock protection.

Features
• All attitude

• Low-cost

• Axial to radial stiffness of 1:1

• Compact, low-profile design

Benefits
• Compact size minimizes required
mounting space

• Mounting permitted at any angle

• Fail-safe design captivates equipment Barry 6300/6550 Series Mounts are Applications
even if elastomer is destroyed designed for use either as an integral • Airborne electronics and racking
mount or isolation system for light to • Ruggedized disk drives
Load Range medium weight electronic equipment.
• Electronic chassis
• Electric motors
• 6300 = 4 load ratings to 11 lbs. Versions are available in Neoprene or Hi-
per mount Damp Silicone for MIL specifications.
• 6550 = 4 load ratings to 18 lbs.
per mount
NATURAL FREQUENCY 15-40 Hertz (6300)
20-40 Hertz (6550)
TRANSMISSIBILITY AT RESONANCE 4.0 Max. (Hi-Damp Silicone)
10.0 Max. (Neoprene)
RESILIENT ELEMENT Hi-Damp Silicone or Neoprene
STANDARD MATERIALS Varies with model
WEIGHT 6300 = 1.0 oz.
6550 = 1.0 oz.

Environmental Data
• Hi-Damp Silicone is ideal for applications requiring greater damping, extreme temperature service
and resistance to fungus and ozone. Operating temperature range is -67˚F to +300˚F
(-55˚C to +150˚C).
• Neoprene operating temperature range is -20˚F to +180˚F (-30˚C + 83˚C) and is resistant to oil
and ozone.

116
 6300 Mount Series
Dimensions & Performance Characteristics
SERIES 6300 DIMENSIONAL DRAWING

LOAD RATINGS
Nat. Rubber Hi-Damp Neoprene Max. Load/Mount
(lbs.)

6300-1A N6300-1A 6300-1NA 1

6300-2A N6300-2A 6300-2NA 2
6300-4A N6300-4A 6300-4NA 4
6300-11A N6300-11A 6300-11NA 11

6300-A and 6300-NA Series Performance Data N6300 Series Performance Data

Load vs. Deflection Load vs. Deflection

180 180
-11A -11A
160 160
140 140
120 120
LOAD (LBS)

LOAD (LBS)

100 100
80 80
60 -4A 60 -4A

40 40
-2A -2A
20 -1A 20
-1A
0 0
0 0.05 0.1 0.15 0.2 0.25 0 0.05 0.1 0.15 0.2 0.25
DEFLECTION (IN) DEFLECTION (IN)

Natural Frequency vs. Load Natural Frequency vs. Load

24 40
NATURAL FREQUENCY (HZ)

NATURAL FREQUENCY (HZ)

22 35
30
20
25
18
20 -4A -11A
16
-1A -2A
15
14
-1A -2A -4A -11A

12 10
0.3 0.5 1 2 4 6 10 20 0.3 0.5 1 2 4 6 10 20
LOAD (LBS) LOAD (LBS)

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

117
 6550 Mount Series
Dimensions & Performance Characteristics
SERIES 6550 DIMENSIONAL DRAWING

6550 SERIES LOAD RATINGS

Nat. Rubber Hi-Damp Neoprene Max. Load/Mount
(lbs.)

6550-4 N6550-4 6550-4N 4

6550-6 N6550-6 6550-6N 6
6550-10 N6550-10 6550-10N 10
6550-18 N6550-18 6550-18N 18

6550 and 6550-N Series Performance Data N6550 Series Performance Data

Load vs. Deflection Load vs. Deflection

280 280
-18 -18

240 240

200 200
LOAD (LBS)

LOAD (LBS)

160 -10 160

-10

120 120
-6
80 -6
80
-4 -4
40 40

0 0
0 0.05 0.1 0.15 0.2 0.25 0.3 0 0.05 0.1 0.15 0.2 0.25 0.3
DEFLECTION (IN) DEFLECTION (IN)

Natural Frequency vs. Load Natural Frequency vs. Load

40 40
NATURAL FREQUENCY (HZ)

35
NATURAL FREQUENCY (HZ)

35
30 30

25 25

20 -6 20 -6
-4 -10 -18
-4
-10 -18
15 15

10 10
1 2 4 6 10 20 1 2 4 6 10 20
LOAD (LBS) LOAD (LBS)

Dimensions and data are subject to

change without notice.
For technical, design, or application
Barry Controls assistance, call toll free:
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

118
 E MOUNT SERIES (E21/E22)
Low-profile, all-attitude isolators for vibration and
shock protection.

Features
• Lightweight, low-profile, all-attitude
isolators

• Available as standard plate type (E21)

or optional cup type (E22)

• Axial to radial stiffness of 1:1

• Sturdy, reliable construction

Benefits
• Fail-safe

• Survives a 30g, 11 millisecond shock

input at rated load Barry E Series Mounts are designed for Applications
optimum shock and vibration isolation of • Equipment in commercial or
military jet aircraft
Load Range lightweight electronic equipment, where
• Missile electronics
• 3 load ratings to 10 lbs. per mount space is a concern. E-Mounts are ideal for • Ruggedized disk drives
isolation where random vibration environ- • Random vibration environments
ments occur, such as in military or com-
mercial aircraft applications.

NATURAL FREQUENCY 25-40 Hertz

TRANSMISSIBILITY AT RESONANCE 4.0 Max.
RESILIENT ELEMENT Hi-Damp Silicone
STANDARD MATERIALS Aluminum w/zinc plated core
WEIGHT E21 = .023 lbs.
E22 = .045 lbs.

Environmental Data
• Hi-Damp Silicone operating temperature range is -67˚F to +300˚F (-55˚C to +150˚C) and storage
temperature range is -100˚F to +300˚F (-75˚C to +150˚C). Elastomer is fungus and ozone
resistant and meets environmental requirements of MIL-E-5400.

119
 E Mount Series (E21)
Dimensions & Performance Characteristics
E21 SERIES DIMENSIONAL DRAWING
LOAD RATINGS
Max. Load/Mount Plate Type Plate Type Weight
(lbs.) Tapped Core Thru Core (lbs.)
4.50 E21-02-40 E21-03-40 .023
7.00 E21-02-50 E21-03-50
10.00 E21-02-60 E21-03-60

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:
1-800-BARRY MA

E21 and E22 Series Performance Data

Axial Load vs. Deflection Natural Frequency vs. Load

200 40
-60
-40 -50 -60

160 35
FREQUENCY (HZ)

-50
LOAD (LBS)

120 30
28
80 26
-40
24
40
22

0 20
0 0.05 0.1 0.15 1 5 10
DEFLECTION (IN) LOAD (LBS)

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

120
 E Mount Series (E22)
Dimensions & Performance Characteristics

E22 SERIES DIMENSIONAL DRAWING

LOAD RATINGS
Max. Load/Mount Cup Type Cup Type Weight
(lbs.) Tapped Core Thru Core (lbs.)
4.50 E22-02-40 E22-03-40 .045
7.00 E22-02-50 E22-03-50
10.00 E22-02-60 E22-03-60

Dimensions and data are subject to change

without notice.
For technical, design, or application assis-
tance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

121
 5200 MOUNT SERIES (5200/5200HT)
Versatile all-attitude isolators for vibration and shock protection.

Features
• All-attitude mounting with rugged,
fail-safe construction

• Axial to radial stiffness of 1:0.6

• Low profile mounts

• Wide range of load ratings for both

stationary and mobile environments

Benefits
• Isolator provides effective vibration
isolation in any attitude

• Fail-safe design captivates the mounted Barry 5200 Series Mounts are for appli- Applications
equipment even if the elastomeric cations where protection is required from • Airborne electronics and racking
shock, vibration or noise. The fail-safe, • Ground transportation applications
elements should be destroyed
• Severe random vibration
low profile construction of 5200 Series environments
Load Range Isolators are ideal for use where space is • Electric motors
• 4 load ratings to 50 lbs. per mount at a minimum.

NATURAL FREQUENCY 15-40 Hertz

TRANSMISSIBILITY AT RESONANCE 4.0 Max. (Hi-Damp Silicone)
10.0 Max. (Neoprene & Natural Rubber)
RESILIENT ELEMENT Hi-Damp Silicone, Neoprene,
or Natural Rubber
STANDARD MATERIALS Zinc plated steel
WEIGHT 5200 = 2.5 oz.
5200H = 3.5 oz.

Environmental Data
• Hi-Damp Silicone version meets shock & vibration requirements of MIL-E-5400 with an
operating temperature range of -67˚F to +300˚F (-55˚C to +150˚C).
• Neoprene version is available for use where temperature extremes are not encountered, but
resistance to oil or ozone is required. Operational temperature range is -20˚F to +180˚F
(-30˚C to +83˚C).

122
 5200 Mount Series
Dimensions & Performance Characteristics

5200 SERIES DIMENSIONAL DRAWING 5200 Series Performance Data

Load vs. Deflection

800

700
5220

600

5215
500

LOAD (LBS)
400

300 5210

5205
200
*
100

0
0 0.05 0.1 0.15 0.2 0.25 0.3
DEFLECTION (IN)

*ø1.375 for ‘N’ prefix (Hi-Damp) Parts

Natural Frequency vs. Load
40
52
20
35

5200 SERIES LOAD RATINGS

30
FREQUENCY (HZ)

52

Part #* Maximum Load Maximum Load

15

/Isolator (lbs.) /Isolator (lbs.) 25

- Stationary - - Mobile -
52
10

5205 15 4-7 20
5210 25 8 - 11
52
05

5215 35 12 - 17
5220 50 18 - 30 15
2 4 6 8 10 15 20 30 40 50
LOAD (LBS)

*Part Numbers shown above are basic numbers. For com-

plete part numbers please see page 78.

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

123
 5200 Mount Series (5200HT)
Dimensions & Performance Characteristics

5200HT SERIES DIMENSIONAL DRAWING

*ø1.375 for ‘N’ prefix (Hi-Damp) Parts

HOW TO ORDER 5200 SERIES ISOLATORS

PLATE STYLE ISOLATORS (5200 SERIES) CUP STYLE ISOLATORS (5200H SERIES)
Letter N placed at beginning for Silicone Letter N placed at beginning for Silicone
Letter N placed at end for Neoprene Letter N placed at end for Neoprene
(Absence of letter N indicates special natural rubber version) (Absence of letter N indicates special natural rubber version)

N 5205-T X N N 5205-H T N
• Use X for hex end of tapped
core opposite 1.5 dia. ring • Use T for 1/4-20 UNC 2B
• Use Y for hex end of tapped core threaded core (hex is inside
• Use T for 1/4-20 UNC 2B threaded core
on side nearest 1.5 dia. ring cup, opposite 1.5” dia. ring)
• Leave blank for through hole
• Leave blank for through hole
• H denotes cup-style version

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

124
 6820 MOUNT SERIES
Economical, low-frequency, low-profile mounts provide vibration
and structure-borne noise control.

Features
• Compact, low-profile design

• Low cost isolator

• Wide load range for most applications

Benefits
• Compact size minimizes required
mounting space

• Economical operation

• Design flexibility

Load Range Barry 6820 Series Mounts are ideal for Applications

• 2 sizes to 80 lbs. per mount

providing economical isolation from vibra- • Electronic equipment where
tion and structure-borne noise for elec- low-profile equipment installation
is required
tronic equipment in cramped environ- • Instrument panels
ments, such as instrument panels or for •Airborne electronics
motors and generators. •Motors & generators

NATURAL FREQUENCY 10-30 Hertz

TRANSMISSIBILITY AT RESONANCE 10.0 Max.
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Steel
WEIGHT 6821 = 1.0 oz.
6822 = 2.25 oz.

Environmental Data
• Hi-Damp Silicone is available as an elastomer option. Limits amplification at resonance to 4 or less.
Operating temperature range is -67˚F to +300˚F (-55˚C to +150˚C).
• Neoprene version is standard and operational temperature range is -20˚F to +180˚F. Neoprene
elastomer is resistant to oils and ozone (-55˚C to +150˚C).

125
 6820 Mount Series (6821/6822)
Dimensions & Load Ranges

6821 SERIES DIMENSIONAL DRAWING 6822 SERIES DIMENSIONAL DRAWING

LOAD RANGES - 6821 SERIES LOAD RANGES - 6822 SERIES

Code Min. Norm. Max. Code Min. Norm. Max.

-1 1.40 2.00 2.80 -1 14.00 20.00 28.00

-2 2.50 4.00 5.50 -2 25.00 40.00 55.00
-3 5.50 10.00 14.00 -3 40.00 60.00 80.00

Dimensions and data are subject to change

without notice.
For technical, design, or application assis-
tance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

126
 6820 Mount Series (6821/6822)
Performance Characteristics

6821 Series Performance Data 6822 Series Performance Data

Load vs. Deflection Load vs. Deflection

25 100
-3
-3 -2
20 80
LOAD (LBS)

LOAD (LBS)
15 60 -1
-2
10 40
-1
5 20

0 0
0 0.05 0.1 0.15 0.2 0 0.05 0.1 0.15 0.2
DEFLECTION (IN) DEFLECTION (IN)

Load vs. Natural Frequency Load vs. Natural Frequency

40 200

100

10 50
LOAD (LBS)
LOAD (LBS)

-3

-2 -3
10
-1
1 -2

-1
0.5 3
6 8 10 12 16 20 30 6 8 10 12 16 20 30
FREQUENCY (HZ) FREQUENCY (HZ)

HOW TO ORDER 6820 ISOLATORS

6822 - 1 - S - N
Basic Model # (6821/6822)
Code For Load Rating (1/2/3)
Configuration of Mounting
(S=Square/D=Diamond)
Elastomer (N=Neoprene, S=Hi-Damp Silicone)

Dimensions and data are subject to change

without notice.
For technical, design, or application assis-
tance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

127
BARRY CONTROLS MULTIAXIS MOUNTS
BARRY CONTROLS MULTIAXIS MOUNTS
Low-profile, economical mounts provide low-frequency vibration isolation in
Features all directions
• All attitude

• Low-cost

• Axial to radial stiffness of 1:1

• Compact, low-profile design

• Available in square or diamond shape

Benefits
• Provides low-frequency vibration isolation
in all directions

• Compact size minimizes required Barry Controls Multiaxis Mounts are designed for Applications
low-frequency vibration isolation. These all-atti- • Oxygen Concentrators
mounting space
• Small Pumps
tude isolators provide effective vibration protec- • Electronic Equipment
• Designed for a wide range of
tion in all directions and are available in either • Medical Equipment
applications
square or diamond configurations. Snubbing • Instruments
washers provide an interlocking system of metal • Compressors
• Easy to install
fasteners which act to prevent damage from
Load Range overload or excessive shock impact.
• Load ratings from 1 to 16 lbs. per
isolator at 3/16” deflection NATURAL FREQUENCY 7 Hertz Under Max. Load
TRANSMISSIBILITY AT RESONANCE 10
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Cold-rolled steel
WEIGHT 1 oz. (27481-S or 27481-D)

Environmental Data
• Standard neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C
to +180˚C) and is resistant to oils, most solvents and ozone.

128
 Multiaxis Mount Series
Dimensions & Performance Characteristics

SERIES 27481-XS SERIES SERIES 27481-XD SERIES

Dimensional Drawing Dimensional Drawing

MULTIAXIS MOUNT SERIES

Load vs Deflection MULTIAXIS MOUNT SERIES
Snubbing Washer
60

-16 The use of snubbing washers is recommend-

ØB ed to ensure proper static and dynamic
loading of the isolator and retention of sus-
pended equipment under severe shock
40 environments.
-13
Load (lbs)

Snubbing washers are ordered by separate

part numbers as shown in the table below.
-9 The standard material is low-carbon steel
20
C
and the standard finish is zinc plate. Other
materials and finishes are available upon
request.
-6
ØA Please consult with Barry Controls
0 Applications Engineering at 1-800-Barry-
0 0.2 0.4 0.6 0.8 MA for more information on the use of
Deflection (in)
snubbing washers.

Part # “A” Dia. “B” Dia. “C”

9810321 1.5” .27” .062”

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

129
 Cylindrical Stud Mounts

• Double Stud (Male/Male) Series

• Stud Insert (Male/Female) Series
• Bumpers (Male Stud only) Series

130
 CYLINDRICAL STUD MOUNT SERIES
Versatile, low-cost, lightweight stud type mounts for vibration,
shock, noise control, and motion accommodation.

Features
• Reduce transmitted vibration from
rotating or reciprocating machinery

• Reduce transmission of structure-

borne noise

• Available in a wide range of load ranges

• Sturdy, reliable construction

Benefits
• Economical

• Prevent shock and vibration damage to

sensitive equipment

Load Range
• 3 styles with load ratings to 260 Barry Stud Mounts are designed to sup-
port loads up to 260 lbs. per mount in Applications
lbs. per isolator
• Fans
compression and up to 70 lbs. in shear.
• Appliances
Their simple design and sturdy construc- • HVAC equipment
tion permit their use in a wide variety of • Electronic equipment
industrial applications. Available in 3 • Pumps, relays & control panels
styles: (1) Double stud, (2) Stud/Insert, • Blowers
(3) Bumpers. • Bumpers

NATURAL FREQUENCY 7-28 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Neoprene & Natural Rubber
STANDARD MATERIALS Low carbon steel

Environmental Data
• Neoprene elastomer has an operating temperature range of -40˚C to +93˚C and is resistant to
oils, most solvents and ozone.
• Natural Rubber elastomer has an operating temperature range of -30˚C to +70˚C.
• Other materials are available on special order to meet specific operating characteristics.

131
 Cylindrical Stud Mounts: Double Stud (Male/Male) Series
Dimensions

A
D

Double Stud (Male/Male) Series

B
Dimensional Drawing (Inches)

C (Thread)

Compression Shear
Natural Natural
Part # A B C D Max. Load Frequency Max. Load Frequency
(lbs.) (Hz) (lbs.) (Hz) Material
A76-041 0.250 0.280 #4-40 0.190 1.0 9.0 2.0 8.0 Natural Rubber
A88-041 0.375 0.625 #8-32 0.375 2.0 20.0 5.0 18.0 Natural Rubber
A00-051 0.438 0.500 #8-32 0.375 10.3 14.0 5.5 10.0 Natural Rubber
A00-031 0.438 0.500 #8-32 0.375 4.8 14.0 2.5 9.0 Natural Rubber
A07-041 0.438 0.438 #6-32 0.250 4.0 13.5 1.0 12.0 Natural Rubber
A07-042 0.438 0.438 #8-32 0.250 4.0 13.5 1.0 12.0 Natural Rubber
A10-041 0.563 0.500 #8-32 0.375 14.0 12.5 7.0 11.0 Natural Rubber
A10-042 0.563 0.500 #10-32 0.375 14.0 12.5 7.0 11.0 Natural Rubber
A98-041 0.750 0.625 #10-32 0.375 18.0 11.0 3.0 9.5 Natural Rubber
A25-041 1.000 0.250 0.250-20 0.500 60.0 25.0 15.0 28.0 Natural Rubber
A20-041 1.000 0.500 0.250-20 0.750 60.0 14.0 20.0 10.0 Natural Rubber
A21-141 1.000 0.531 0.250-20 0.500 55.0 13.0 23.0 7.5 Neoprene
A22-071 1.000 0.750 0.250-20 0.625 90.0 14.0 50.0 10.0 Natural Rubber
A22-041 1.000 0.750 0.250-20 0.750 40.0 11.0 10.0 13.0 Natural Rubber
A22-141 1.000 0.750 0.250-20 0.500 50.0 10.0 14.0 7.5 Neoprene
A22-131 1.000 0.750 0.250-20 0.500 44.0 10.0 11.5 7.5 Neoprene
A22-062 1.000 0.750 0.312-18 0.750 70.0 12.0 35.0 10.0 Natural Rubber
A22-142 1.000 0.750 0.312-18 0.562 50.0 10.0 14.0 7.5 Neoprene
A22-053 1.000 0.750 6mm 0.500 60.0 10.0 33.0 8.0 Natural Rubber
A23-042 1.000 1.000 0.250-20 0.750 35.0 9.0 8.0 8.0 Natural Rubber
A23-041 1.000 1.000 0.312-18 0.625 35.0 9.0 8.0 8.0 Natural Rubber
A23-141 1.000 1.000 0.312-18 0.562 35.0 10.0 12.0 7.5 Neoprene
A32-151 1.250 0.750 0.312-18 0.562 98.0 10.0 31.0 7.5 Neoprene
A34-141 1.250 1.250 0.312-18 0.562 76.0 10.0 13.5 7.5 Neoprene
A43-042 1.375 1.000 0.375-16 0.750 70.0 12.0 40.0 9.0 Natural Rubber
A43-151 1.375 1.000 0.312-18 0.562 96.0 10.0 32.0 7.5 Neoprene
A53-061 1.500 1.000 0.375-16 1.000 150.0 9.0 40.0 6.5 Natural Rubber

Dimensions and data are subject to change without notice.

For technical, design, or application assistance, call toll free: 1-800-BARRY MA

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

132
 Cylindrical Stud Mounts:Double Stud (Male/Male) Series
Performance Characteristics

A21-141 Load vs Deflection A23-141 Load vs Deflection

80 60
COMPRESSION
70 COMPRESSION
50
60
40
LOAD (LBS)

LOAD (LBS)
50

40 30
SHEAR
30
20
20
SHEAR
10
10
0 0
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35
DEFLECTION (IN) DEFLECTION (IN)

Static Load (lbs.) Natural Frequency (Hertz) Static Load (lbs.) Natural Frequency (Hertz)
IN SHEAR IN SHEAR
23.0 7.5 12.0 7.0
18.5 8.0 10.5 7.5
12.5 10.0 8.5 8.0
9.5 12.0 5.7 10.0
7.0 13.0 4.5 12.0
4.0 17.0 3.5 13.0
3.0 20.0 2.3 17.0
IN COMPRESSION 1.0 20.0
55.0 13.0 IN COMPRESSION
32.5 17.0 35.0 10.0
10.0 20.0 20.0 12.0
15.0 13.0
9.5 17.0
7.0 20.0

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

133
 Cylindrical Stud Mounts:Double Stud (Male/Male) Series
Performance Characteristics

A22-142 Load vs Deflection A22-131 Load vs Deflection

60 50

COMPRESSION COMPRESSION
50
40

40
LOAD (LBS)

LOAD (LBS)
30
30
20
20 SHEAR
SHEAR

10 10

0 0
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35
DEFLECTION (IN) DEFLECTION (IN)

Static Load (lbs.) Natural Frequency (Hertz) Static Load (lbs.) Natural Frequency (Hertz)
IN SHEAR IN SHEAR
14.0 7.0 11.5 7.5
10.0 9.0 7.2 8.0
6.0 14.0 6.0 10.0
2.0 22.0 4.5 12.0
IN COMPRESSION 3.3 13.0
50.0 10.0 2.0 17.0
40.0 11.0 1.5 20.0
30.0 12.5 IN COMPRESSION
20.0 15.5 44.0 10.0
10.0 21.0 31.5 12.0
23.0 13.0
14.5 17.0
10.0 20.0

Dimensions and data are subject to change without notice.

For technical, design, or application assistance, call toll free:

1-800-BARRY MA

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

134
 Cylindrical Stud Mounts:Double Stud (Male/Male) Series
Performance Characteristics

A22-141 Load vs Deflection A34-141 Load vs Deflection

60 160
COMPRESSION
COMPRESSION 140
50
120
40
LOAD (LBS)

LOAD (LBS)
100
30 80

SHEAR 60
20
SHEAR
40
10
20
0 0
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
DEFLECTION (IN) DEFLECTION (IN)

Static Load (lbs.) Natural Frequency (Hertz)

Static Load (lbs.) Natural Frequency (Hertz) IN SHEAR
IN SHEAR
13.5 7.5
14.5 7.5
10.0 8.0
11.5 8.0
8.0 10.0
8.0 10.0
6.0 12.0
5.7 12.0
4.0 13.0
4.5 13.0
3.0 17.0
3.0
2.0 20.0
2.0 20.0
IN COMPRESSION
IN COMPRESSION
76.0 8.0
50.0 10.0
42.0 10.0
35.5 12.0
31.0 12.0
25.5 13.0
23.0 13.0
16.5 17.0
15.0 17.0
12.5 20.0
10.0 20.0

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

135
 Cylindrical Stud Mounts:Double Stud (Male/Male) Series
Performance Characteristics

A32-151 Load vs Deflection A43-151 Load vs Deflection

140 350
COMPRESSION COMPRESSION
120 300

100 250

LOAD (LBS)
LOAD (LBS)

80 200
SHEAR

60 150
SHEAR
40 100

20 50

0 0
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
DEFLECTION (IN) DEFLECTION (IN)

Static Load (lbs.) Natural Frequency (Hertz) Static Load (lbs.) Natural Frequency (Hertz)
IN SHEAR IN SHEAR
31.0 7.5 32.0 7.5
24.0 8.0 24.0 8.0
16.5 10.0 16.0 10.0
12.0 12.0 12.0 12.0
9.0 13.0 10.0 13.0
6.0 17.0 6.0 17.0
5.0 20.0 4.0 20.0
IN COMPRESSION IN COMPRESSION
98.0 10.0 96.0 10.0
68.0 12.0 68.0 12.0
50.0 13.0 48.0 13.0
30.0 17.0 32.0 17.0
20.0 20.0 24.0 20.0

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

136
 Double Stud (Male/Male) Series (G05-141)
Performance Characteristics

G05-141 CYLINDRICAL STUD MOUNT G05-141 Load vs Deflection

Dimensional Drawing
800
COMPRESSION

600

LOAD (LBS)
400

SHEAR
200

0
0 0.2 0.4 0.6 0.8 1
DEFLECTION (IN)

Static Load (lbs.) Natural Frequency (Hertz)

IN SHEAR
70.0 6.0
60.0 7.5
45.0 8.0
800
35.0 COMPRESSION 10.0
30.0 12.0
600
19.0 13.0
LOAD (LBS)

17.0 17.0
400
9.0 20.0
SHEAR
IN COMPRESSION
200
260.0 10.0
190.0 12.0
0
0140.0 0.2 0.4 0.6 13.0 0.8 1
90.0 17.0
DEFLECTION (IN)

60.0 20.0
24.0 20.0

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

137
 Stud Mounts: Stud/Insert (Male/Female)Series
Performance Characteristics

STUD/INSERT (MALE/FEMALE) SERIES

Dimensional Drawing (Inches)

A
C (External Thread)

C (Internal Thread)

Compression Shear
Max. Load Natural Max. Load Natural
Part # A B C D (lbs.) Frequency (lbs.) Frequency Material
(Hz) (Hz)
27052-01 0.438 0.438 #6-32 0.250 4.0 13.5 1.0 12.0 Natural Rubber
27052-02 0.438 0.438 #8-32 0.250 4.0 13.5 1.0 12.0 Natural Rubber
27052-07 0.563 0.500 #10-32 0.375 8.0 19.0 2.0 20.0 Natural Rubber
27052-04 0.563 0.500 #8-32 0.250 14.0 12.5 8.0 11.0 Natural Rubber
27052-08 0.563 0.500 #8-32 0.250 25.0 13.0 12.0 12.0 Natural Rubber
27052-06 0.750 0.625 #10-32 0.375 18.0 11.0 3.0 9.5 Natural Rubber
27052-09 1.000 0.750 0.250-20 0.500 40.0 9.5 12.0 10.0 Natural Rubber
27052-10 1.000 0.750 0.250-20 0.500 95.0 13.0 40.0 10.0 Natural Rubber
27052-11 1.000 0.750 0.250-20 0.500 60.0 13.0 33.0 10.0 Natural Rubber
27052-05 1.000 1.000 0.250-20 0.500 35.0 9.0 10.0 8.0 Natural Rubber
27052-12 1.000 1.000 0.312-18 0.500 35.0 12.0 10.0 10.0 Natural Rubber
27052-03 1.250 1.000 0.312-18 0.625 50.0 9.0 12.0 7.0 Natural Rubber
27052-13 1.500 1.375 0.375-16 0.625 75.0 10.0 15.0 12.0 Natural Rubber
27052-14 1.500 1.375 0.375-16 0.625 100.0 10.0 20.0 12.0 Natural Rubber

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

138
 Cylindrical Stud Mounts: Bumpers (Male Stud only) Series
Dimensions & Performance Characteristics

BUMPERS (MALE STUD ONLY) SERIES

Dimensional Drawing (Inches)

øA

C Thread

Max. Load
Part # A B C D (lbs.) Material
Compression
27051-03 0.438 0.438 #6-32 0.250 3.0 Natural Rubber
27051-04 0.563 0.500 #8-32 0.375 6.0 Natural Rubber
27051-05 0.750 0.625 #10-32 0.375 15.0 Natural Rubber
27051-02 1.000 0.375 0.312-18 1.250 40.0 Natural Rubber
27051-06 1.000 0.375 0.312-18 0.625 45.0 Natural Rubber
27051-07 1.000 0.625 0.312-18 0.625 48.0 Natural Rubber
27051-08 1.000 0.750 0.250-20 0.500 35.0 Natural Rubber
27051-01 1.000 1.000 0.312-18 0.625 40.0 Natural Rubber
27051-09 1.250 0.750 0.312-18 0.625 50.0 Natural Rubber
27051-10 1.500 1.000 0.312-18 0.625 100.0 Natural Rubber
27051-11 1.500 1.000 0.375-16 0.625 100.0 Natural Rubber

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

139
 All Elastomer Isolators

• Ring & Bushing Isolators

• Ball Mounts

140
 RING & BUSHING MOUNT SERIES
Versatile, low cost elastomeric isolators protect against shock and
vibration and reduce structure borne noise.

Features
• Can be installed in parallel or series for
greater load capacity

• Ribbed protrusions act as load

bearing members

• Available in four stiffnesses (-030,

-040, -050 and -060)

• Designed for base mounting

Benefits
• Highly efficient noise reduction
Barry Ring & Bushing Isolators consist of
Applications
• Absorb vibration and shock perpendicular an elastomeric ring and elastomeric bush- • Office machines
to mounting axis ing and are designed to be directly incor- • Motors
porated into the structural components of • Fans & blowers
• WB4 bushings have radial fingers on
the equipment to be mounted. Any num- • HVAC equipment
one surface only to act as rebound • Electronics equipment
ber of these isolators can be installed in
(shock absorbing) members • Telecommunications equipment
parallel for greater load capacity and may
Load Range be stacked in series when greater deflec-
tion capacity is required.
• WR1/WB1 = 4 load ratings to
12 lbs. per isolator NATURAL FREQUENCY See tables

• WR3/WB3 = 4 load ratings to TRANSMISSIBILITY AT RESONANCE 10:1

35 lbs. per isolator RESILIENT ELEMENT Natural rubber
STANDARD MATERIALS None
• WR4/WB4 = 4 load ratings to
75 lbs. per isolator WEIGHT WB6 = 3.37 oz. (All other WR/WB
parts weigh less than 1.0 oz.)
• WR6/WB6 = 4 load ratings to
350 lbs. per isolator

Environmental Data
• Natural rubber elastomer is compatible with most industrial and commercial environments and
has an operating temperature range of -40˚F to +180˚F (-40˚C to +83˚C).
• Special materials are available upon special order.

141
 Ring & Bushing Mount Series (WR-1/WB-1)
Dimensions & Performance Characteristics

WR-1 (Ring) WB-1 (Bushing)

RECOMMENDED LOAD LIMITS FOR RING & BUSHING ASSEMBLY

WR-1 Series Load vs Natural Frequency
Assembly Min. Load Max. Load

12
WR1-030/WB1-030 1 lb. 4 lbs.
WR1-040/WB1-040 2 lbs. 6 lbs.
10
-06
0 WR1-050/WB1-050 3 lbs. 8 lbs.
8
LOAD (LBS)

-05
0
WR1-060/WB1-060 5 lbs. 12 lbs.
6
-04
0
4
-030

0
16 18 20 22 24 26 28
NATURAL FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

142
 Ring & Bushing Mount Series (WR-3/WB-3)
Dimensions & Performance Characteristics

WR-3 (Ring) WB-3 (Bushing)

WR-3 Series Load vs Natural Frequency RECOMMENDED LOAD LIMITS FOR RING & BUSHING ASSEMBLY
Assembly Min. Load Max. Load
35 WR3-030/WB3-030 6 lb. 20 lbs.
30 WR3-040/WB3-040 7 lbs. 23 lbs.
-0
6

WR3-050/WB3-050 10 lbs. 25 lbs.

0

25
LOAD (LBS)

-0
40 WR3-060/WB3-060 15 lbs. 35 lbs.
-0
50

20
-0
30

15

10

5
12 14 16 18 20 22 24 26
NATURAL FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

143
 Ring & Bushing Mount Series (WR-4/WB-4)
Dimensions & Performance Characteristics

WR-4 (Ring) WB-4 (Bushing)

WR-4 Series Load vs Natural Frequency

RECOMMENDED LOAD LIMITS FOR RING & BUSHING ASSEMBLY
Assembly Min. Load Max. Load
80 WR4-030/WB4-030 10 lbs. 35 lbs.
70 WR4-040/WB4-040 20 lbs. 50 lbs.
-0

WR4-050/WB4-050 30 lbs. 60 lbs.

60

60
-0
LOAD (LBS)

50
50 WR4-060/WB4-060 40 lbs. 75 lbs.
40
-0
40
30
-0
30
20

10
8 10 12 14 16 18
NATURAL FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

144
 Ring & Bushing Mount Series (WR-6/WB-6)
Dimensions & Performance Characteristics

WR-6 (Ring) WB-6 (Bushing)

26.9

ø2.125 + .030
[ø73]

WR-6 Series Load vs Natural Frequency

RECOMMENDED LOAD LIMITS FOR RING & BUSHING ASSEMBLY
Assembly Min. Load Max. Load
350 WR6-030/WB6-030 60 lb. 120 lbs.
300 WR6-040/WB6-040 110 lbs. 160 lbs.
250 WR6-050/WB6-050 135 lbs. 250 lbs.
LOAD (LBS)

-0
60
200 WR6-060/WB6-060 160 lbs. 350 lbs.
-0
50
150 -0
-0 40
30
100

50
6 7 8 9 10 11
NATURAL FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

145
 Ring & Bushing Mount Series
Installation Data & Specifications

TYPICAL INSTALLATION - RING & BUSHING

Equipment A
W Series Bushing

Support

W Series Bushing
Washer
A

Spacer Nut
Bolt

Equipment A
W Series Bushing

Support

W Series Ring
Washer
B
Spacer
Nut
Bolt

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

146
 BALL MOUNT SERIES
Low cost, compact, all elastomer mounts for vibration and noise
control.

Features
• All elastomer isolators

• Fail-safe when installed with ordinary

nuts & washers

• Wide load range ratings

• Offer a wide variety of installation

options

Benefits
• Provide low frequency vibration isolation

• Effective noise isolators Barry Ball Mount Series Isolators are

Applications
miniature, low-cost isolators that provide • Electromechanical equipment
• Will not bottom out under light shock
medium natural frequency vibration isola- • Medical equipment
loadings
tion for precision equipment, electronics • Appliances

Load Range and office equipment. • Office equipment

• Other precision applications
• Series 7110 = 3 load ratings to
2 lbs. per isolator

• Series 275 = 5 load ratings to

3.2 lbs. per isolator
NATURAL FREQUENCY 10-20 Hertz
• Series 302 and 372 = 4 load ratings to TRANSMISSIBILITY AT RESONANCE 10 (Neoprene)/4.0 (Silicone)
9 lbs. per isolator
RESILIENT ELEMENT Neoprene or Hi-damp silicone
STANDARD MATERIALS None
WEIGHT See load range table

Environmental Data
• Neoprene elastomer has an operating temperature range of -40˚F to +180˚F (-40˚C to +83˚C)
and is resistant to oil and ozone.
• Silicone elastomer has an operating temperature range of -67˚F to +300˚F (-55˚C to +150˚C).

147
 Ball Mount Series (275/372)
Dimensions & Performance Characteristics

275 Series Dimensional Drawing

4

LOAD (LBS)
1 -5N
-6N
0.6 -4N
0.4 -2N

-1N
0.2

0.1
8 10 15 20 25 30
NATURAL FREQUENCY (HZ)

372 Series Dimensional Drawing

10
LOAD (LBS)

-4N

-3N

-2N

1 -1N
10 15 20 25 30
NATURAL FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

148
Ball Mount Series (302/7110)
Dimensions & Performance Characteristics

302 Series Dimensional Drawing

10
( )

LOAD (LBS)
-4N

-3N

-2N

1 -1N
10 15 20 25 30
NATURAL FREQUENCY (HZ)

7110 Series Dimensional Drawing

3

1
LOAD (LBS)

-2.0

-1.0

-.5

0.1
10 15 20 25 30 35 40
NATURAL FREQUENCY (HZ)

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

149
 Ball Mount Series
Installation Data & Load Range Specifications

TYPICAL INSTALLATION - BALL MOUNT

Mounted Unit

Mounted Unit
Mounted Unit

Rigid Support Rigid Support

Rigid Support

Mounted Unit Rigid Support

Mounted Unit

Rigid Support Rigid Support

Mounted Unit

Spacer

BALL MOUNT SERIES LOAD RANGES AND SPECIFICATIONS

Static Load Range/ Horiz. to Vert. Wt. (ozs.)
Elastomer Catalog No. Color Code Mount (lbs) Stiffness Ratio Approx.
Neoprene 275-1N Orange & White 0.4-0.7
275-2N Red & White 0.6-1.2 0.35 0.1
275-4N Yellow & White 0.8-1.6 (Approx.)
275-5N Green & White 1.3-2.6
275-6N Blue & White 1.6-3.2
Neoprene 302-1N 372-1N Yellow & White 1.3-3.5
Neoprene 302-2N 372-2N Purple & White 2.3-4.5 0.25 0.5
Neoprene 302-3N 372-3N Green & White 3.0-6.0 (Approx.)
Neoprene 302-4N 372-4N Blue & White 4.5-9.0
7110-0.5 Red 0.3-0.5 0.35 0.1
Silicone 7110-1.0 Blue 0.5-1.0 0.35 0.1
7110-2.0 Orange 1.0-2.0 0.35 0.1

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

150
Metal & Mesh Mounts

• 1200 Series
• MET-L-FLEX Bushings
• 9300 Series Mounts
• Cablemount Series

151
 1200 MOUNT SERIES (1201/1202)
Small, lightweight unit isolators for airborne, vehicular and
industrial applications.

Features
• Axial to radial stiffness of 3:1

• Rugged, reliable construction

• Stainless steel cushions

• Vertical natural frequency of 10 Hertz

Benefits
• Isolators are not effected by oil, dust
water, ozone or atmospheric pressure

• High damping characteristics

Load Range The high damping and nonlinear charac- Applications

teristics of MET-L-FLEX load carrying ele- • Electronic, pneumatic and
• 1201 Series = 3 load ratings to ment and limiter pads in the all metal hydraulic devices
10 lbs. per mount 1201 and 1202 Series Isolators assure
• Vehicular mounted equipment
• Industrial & military packaging
• 1202 Series = 4 load ratings to controlled shock and vibration isolation • Shipboard electronics
40 lbs./mount protection for mounted equipment. • Communications equipment

NATURAL FREQUENCY 15-20 Hertz

TRANSMISSIBILITY AT RESONANCE 3.0-4.0

RESILIENT ELEMENT Metal Mesh

STANDARD MATERIALS Aluminum
WEIGHT 1201 = 1.5 oz.
1202 = 4.2 oz.

Environmental Data
• Operating temperature ranges of -130˚F to +375˚F.
• Applicable to military standards.
• Resistant to dust, oils, oil-based solvents, salt water and sand.

152
 1200 Mount Series (1201/1202)
Dimensions & Performance Characteristics

SERIES 1201 SERIES 1202

Dimensions and data are

subject to change without
notice.

For technical, design, or

application assistance,
call toll free:

1-800-BARRY MA

LOAD RATING
Dimpled Non-Dimpled Load
Mounting Mounting Rating (lbs.)
1201-1 1201-1A 1-3
1201-2 1201-2A 2.5 - 5.5
1201-3 1201-3A 5 - 10
1202-1 1202-1A 2.5 - 6
1202-2 1202-2A 5.5 - 12.5
1202-3 1202-3A 10 - 20
1202-4 1202-4A 18 - 40

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

153
 MET-L-FLEX BUSHINGS
All metal bushings provide excellent vibration and shock protec-
tion under adverse environmental conditions.

Features
• Wide temperature range

• Metal mesh construction

• Axial to radial stiffness of 8:1

• Non-linear spring rate

Benefits
• Isolators are not effected by oil, dust,
water, ozone or atmospheric pressure

• Excellent vibration isolation

• Rapid elimination of shock without Barry MET-L-FLEX Bushings are used wher- Applications
damaging rebound ever environmental conditions could dam- • Shipboard, marine and vehicle
age or destroy conventional elastomeric applications
• No distortion set under sustained loads • Fans & blowers
bushings. They are used in the assembly • Aerospace & military applications
and interconnection of mounting and • Motor/generator sets
structural elements.

NATURAL FREQUENCY 230 Hertz Vertical

TRANSMISSIBILITY AT RESONANCE 5.5

RESILIENT ELEMENT Metal mesh

WEIGHT See Table

Environmental Data
• Operating temperature ranges of -130˚F to +500˚F (-90˚C to +260˚C).
• Applicable to military standard.
• Resistant to dust, oils, oil-based solvents, extreme temperatures, salt water and sand.

154
 MET-L-FLEX Bushing Series
Dimensions & Performance Characteristics

MET-L-FLEX BUSHINGS
Part # A B C D E F WEIGHT RECOMMENDED LOAD*
MG30425-1 .14 11/32 1/4 7/64 1/16 1/8 .03 10 lbs.
MG30428-1 .16 25/64 9/32 9/64 1/16 1/8 .05 12 lbs.
MG30431-1 .19 5/16 5/16 9/64 1/16 1/8 .06 16 lbs.
MG30441-1 .25 9/16 13/32 11/64 5/64 5/32 .11 27 lbs.
MG30450-1 .31 11/16 1/2 7/32 3/32 3/16 .21 42 lbs.
MG30462-1 .38 7/8 5/8 17/64 1/8 1/4 .42 64 lbs.

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

155
 9300 MOUNT SERIES

Features
• Axial to radial stiffness of 1:1

• Rugged, reliable construction

• All attitude isolators

Benefits
• Isolators are not effected by oil, dust,
water, ozone or atmospheric pressure

• Ideal for center of gravity type

suspensions

Load Range
• 9300 Series = 17 load ratings to
16 lbs. per mount Barry 9300 Series isolators are versatile, Applications
double acting mountings for installation • Airborne electronics
with electronic & electromechanical equip- • Ideal for use in applications
ment requiring protection against the where attitude of equipment in
operation may vary, such as
vibration and shock encountered in air-
missiles
borne operations.

NATURAL FREQUENCY 12-15 Hertz

TRANSMISSIBILITY AT RESONANCE 4.0 Max

RESILIENT ELEMENT Springs & Metal Mesh

STANDARD MATERIALS Aluminum Housing
WEIGHT 9301 = 1.25 oz.
9302 = 2.75 oz.
9303 = 4.75 oz.

Environmental Data
• Operating temperature ranges of -130˚F to +375˚F (-90˚C to +190˚C).
• Applicable to military standards.
• Resistant to dust, oils, oil-based solvents, salt water and sand.

156
 9300 Mount Series
Dimensions & Load Range Specifications

9300 MOUNT SERIES DIMENSIONAL DRAWING

Dimensions and data are
subject to change without
A B notice.
C For technical, design, or
application assistance, call
toll free:
G (NO LOAD)
1-800-BARRY MA
H B C

E (HOLES)
F

DIMENSIONS (INCHES)
Part # Load Range A B C D E F G H I J
9301-1 .5 - 1 lbs. 15/16 1 1/4 1 10-32 .141 3/64 51/64 11/2 5/16 3/8

9301-2 1 - 2 lbs.
9303-3 2 - 3 lbs.
9302-1 1-2 lbs. 1 7/32 1 3/4 1.375 1/4 -20 .196 3/16 1 3/32 2 1/8 9/16

9302-2 1 3/4 - 3 1/2 lbs.

9302-3 3 1/4 - 6 1/2 lbs.
9303-1 2 - 3 lbs. 1 9/16 1 31/32 1.375 5/16 -24 .196 3/16 1 1/4 2 5/16 5/16 1/2

9303-2 3 - 5 lbs.
9303-3 5 - 7 lbs.
9303-4 7 - 10 lbs.
9303-7 10 - 13 lbs.
9304-1 1 - 2 lbs. 1 15/16 2 1/4 1.750 5/16 -24 .196 3/16 1 1/4 2 5/16 5/16 1/2

9304-2 7 - 11 lbs.
9304-3 11 - 16 lbs.
9304-4 4.5 - 7 lbs.
9304-5 2 - 3 lbs.
9304-6 3 - 4.5 lbs.

157
 CABLEMOUNT SERIES
Rugged, all metal cable type isolators offer excellent shock and
vibration protection in hostile environments.

Features
• All-attitude mounting

• Fail-safe design

• Available in a wide range of sizes

and load ranges for most applications

• High damping

Benefits
• Performs efficiently without material
degradation in hostile environments

• Ideal for use in high temperature and/or

under corrosive conditions

• Many custom versions are available.

Consult factory for more information
Cablemounts are designed to perform effi- Applications
Load Range ciently without material or performance • Shipboard navigational, fire
control and communications
• 11 styles to accommodate up to 1,500 degradation in extremely hostile environ-
equipment
lbs. per mount ments. They are operational under wide • On/Off road vehicles
extremes of temperature ranges and resist • Motor/Generator sets
chemicals, oils and abrasives. • Extreme temperature environ-
ments, such as engine
compartments

NATURAL FREQUENCY 10-20 Hertz

TRANSMISSIBILITY AT RESONANCE 3.5

RESILIENT ELEMENT Stainless steel cable

STANDARD MATERIALS Aluminum mounting bars

Environmental Data
• Operating temperature ranges of -400˚F to +700˚F (-240˚C to +370˚C).
• Applicable to military standards of MIL-STD-167 (vibration), MIL-S-901 (shock) and MIL-E-16400.
• Resistant to dust, oils, oil-based solvents, salt water and sand.

158
 Cablemount Mount Series (CM00628)
Dimensions & Load Ratings

SUFFIX MOUNTING HOLE CONFIGURATION

NONE Standard Configuration as shown in drawing
-A 8-32 Threaded inserts in both retaining bars
-B 8-32 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M4 x .7 Threaded inserts in both
retaining bars
-D M4 x .7 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM00628-1 .70 1.00 14.0 .3 7.0 .3 6.5 .3 7.5 .7
CM00628-2 .80 1.10 8.5 .4 3.5 .4 3.5 .4 4.2 .7
CM00628-3 1.00 1.20 5.2 .5 1.6 .6 1.6 .6 3.4 .8
CM00628-4 1.10 1.30 4.8 .7 1.4 .7 1.4 .7 2.5 .9
CM00628-5 1.20 1.40 2.9 .8 1.3 .9 1.3 .9 1.9 .9
CM00628-6 1.30 1.50 2.5 .9 .7 .9 .7 .9 1.5 1.1

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

159
 Cablemount Mount Series (CM00938)
Dimensions & Load Ratings

SUFFIX MOUNTING HOLE CONFIGURATION

4.42 NONE Standard Configuration as shown in drawing
[112.3]
.23 3.95 -A 10-32 Threaded inserts in both retaining bars
[6.0] [100.3]
-B 10-32 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
.50 in other retaining bar
[12.7]
-C M5 x .8 Threaded inserts in both
retaining bars
MOUNTING HOLE STANDARD CONFIGURATION
.177Ø (4.5Ø) THRU HOLE WITH 82˚ COUNTERSINK
TO .34Ø (8.6Ø) FOUR PLACES
-D M5 x .8 Threaded inserts in one retaining
bar and standard configuration as shown in
.25
[6.3]
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM00938-1 .90 1.10 50.0 .3 23.0 .4 15.0 .4 28.0 .8
CM00938-2 1.00 1.20 31.0 .3 10.0 .5 10.0 .5 19.0 .9
CM00938-3 1.10 1.30 25.0 .4 6.5 .5 6.5 .5 14.5 .9
CM00938-4 1.30 1.50 12.0 .5 4.0 .6 4.0 .6 9.0 .9
CM00938-5 1.40 1.60 9.5 .6 3.0 .7 3.0 .7 6.0 1.1
CM00938-6 1.50 1.70 7.5 .7 2.5 .8 2.5 .8 5.0 1.5

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

160
 Cablemount Mount Series (CM01258)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

.280Ø (7.1Ø) THRU HOLE WITH 82˚ COUNTERSINK
TO .54Ø (13.7Ø) FOUR PLACES
SUFFIX MOUNTING HOLE CONFIGURATION
NONE Standard Configuration as shown in drawing
-A 1/4 -20 Threaded inserts in both retaining bars
-B 1/4 -20 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M6 x 1.0 Threaded inserts in both
retaining bars
-D M6 x 1.0 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM01258-1 1.10 1.40 75.0 .2 30.0 .4 28.0 .4 55.0 .9
CM01258-2 1.20 1.50 68.0 .4 21.0 .6 24.0 .6 43.0 .9
CM01258-3 1.30 1.60 50.0 .5 19.0 .7 19.0 .7 33.5 1.0
CM01258-4 1.40 1.70 44.0 .7 13.0 .8 13.0 .8 25.0 1.1
CM01258-5 1.50 1.80 34.0 .7 12.0 .9 12.0 .9 21.0 1.2
CM01258-6 1.60 1.90 33.0 .7 10.0 .9 10.0 .9 19.0 1.5

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

161
 Cablemount Mount Series (CM01878)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

SUFFIX MOUNTING HOLE CONFIGURATION
.280Ø (7.1Ø) THRU HOLE WITH 82˚ COUNTERSINK
TO .54Ø (13.7Ø) FOUR PLACES
NONE Standard Configuration as shown in drawing
-A 1/4 -20 Threaded inserts in both retaining bars
-B 1/4 -20 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M6 x 1.0 Threaded inserts in both
retaining bars
-D M6 x 1.0 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM01878-1 1.20 1.40 325 .3 160 .4 90 .4 370 .4
CM01878-2 1.30 1.50 190 .3 58 .4 63 .4 250 .6
CM01878-3 1.40 1.60 165 .4 55 .5 45 .5 230 .7
CM01878-4 1.50 1.70 150 .5 45 .5 35 .5 190 .9
CM01878-5 1.60 1.80 120 .7 38 .5 33 .5 150 .9
CM01878-6 1.70 1.90 100 .8 25 .6 31 .6 130 1.0

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

162
 Cablemount Mount Series (CM02508)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

SUFFIX MOUNTING HOLE CONFIGURATION
.280Ø +/- .005 THRU (7.1Ø) Ø .540 +/- .015

NONE Standard Configuration as shown in drawing

x 82˚ COUNTERSINK
(Ø13.7) 4 PLACES

-A 1/4 -28 Threaded inserts in both retaining bars

-B 1/4 -28 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M6 x 1.0 Threaded inserts in both
retaining bars
-D M6 x 1.0 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM02508-1 1.90 2.20 163 .6 69 .8 62 .8 90 1.5
CM02508-2 2.13 2.50 113 .8 45 1.0 40 1.0 65 1.8
CM02508-3 2.31 2.80 94 1.0 30 1.3 33 1.3 50 2.2
CM02508-4 2.50 3.13 63 1.1 20 1.6 23 1.6 38 2.3
CM02508-5 2.50 3.50 50 1.3 15 1.7 21 1.7 30 2.5
CM02508-6 2.63 3.75 43 1.5 13 1.9 20 1.9 24 2.7
CM02508-7 2.63 3.95 38 1.5 12 2.0 13 2.0 26 2.8
CM02508-8 3.25 4.25 29 2.0 9 2.2 12 2.2 18 3.0

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

163
 Cablemount Mount Series (CM03756)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

SUFFIX MOUNTING HOLE CONFIGURATION
.280Ø +/- .005 THRU (7.1Ø) Ø .540 +/- .015
x 82˚ COUNTERSINK
(Ø13.7) 8 PLACES
NONE Standard Configuration as shown in drawing
-A 1/4 - 28 Threaded inserts in both retaining bars
-B 1/4 - 28 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M6 x 1.0 Threaded inserts in both
retaining bars
-D M6 x 1.0 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM03756-1 2.80 3.31 263 1.0 113 1.0 80 1.0 195 1.5
CM03756-2 2.90 3.50 244 1.1 48 1.1 66 1.1 180 2.0
CM03756-3 3.00 4.13 150 1.3 43 1.5 52 1.5 100 2.3
CM03756-4 3.25 4.25 131 1.5 29 1.6 44 1.6 90 2.8
CM03756-5 3.50 4.50 104 1.8 25 1.7 24 1.7 56 3.5
CM03756-6 4.13 4.75 94 2.0 23 2.0 21 2.0 52 4.0
CM03756-7 4.25 5.50 56 2.2 14 2.2 17 2.2 30 4.5

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

164
 Cablemount Mount Series (CM03758)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

.280Ø +/- .005 THRU (7.1Ø) Ø .540 +/- .015
SUFFIX MOUNTING HOLE CONFIGURATION
x 82˚ COUNTERSINK

NONE Standard Configuration as shown in drawing

(Ø13.7) 8 PLACES

-A 1/4 -28 Threaded inserts in both retaining bars

-B 1/4 - 28 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M 6 x 1.0 Threaded inserts in both
retaining bars
-D M 6 x 1.0 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM03758-1 2.80 3.31 350 1.0 150 1.0 106 1.0 260 1.5
CM03758-2 2.90 3.50 325 1.1 63 1.1 88 1.1 240 2.0
CM03758-3 3.00 4.13 200 1.3 60 1.5 69 1.5 135 2.3
CM03758-4 3.25 4.25 175 1.5 38 1.6 59 1.6 120 2.8
CM03758-5 3.50 4.50 138 1.8 34 1.7 30 1.7 75 3.5
CM03758-6 4.13 4.75 125 2.0 31 2.0 28 2.0 70 4.0
CM03758-7 4.25 5.50 75 2.2 19 2.2 22 2.2 40 4.5

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

165
 Cablemount Mount Series (CM05006)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

.328Ø +/- .005 THRU (8.3Ø) Ø .680 +/- .015
x 82˚ COUNTERSINK
SUFFIX MOUNTING HOLE CONFIGURATION
(Ø17.3) 8 PLACES

NONE Standard Configuration as shown in drawing

-A 1/4 -28 Threaded inserts in both retaining bars
-B 1/4 - 28 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M 6 x 1.0 Threaded inserts in both
retaining bars
-D M 6 x 1.0 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM05006-1 3.25 4.00 469 1.0 143 1.0 158 1.0 300 1.5
CM05006-2 3.50 4.13 356 1.1 113 1.1 120 1.1 225 2.0
CM05006-3 3.75 4.75 206 1.3 53 1.5 83 1.5 180 2.3
CM05006-4 4.25 5.25 150 1.5 41 1.6 56 1.6 128 2.8
CM05006-5 4.90 5.65 90 1.8 38 1.7 30 1.7 98 3.5
CM05006-6 5.40 6.13 75 2.0 26 2.0 26 2.0 68 4.0
CM05006-7 6.10 7.10 45 2.2 21 2.2 24 2.2 41 4.5

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

166
 Cablemount Mount Series (CM05008)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

.328Ø +/- .005 THRU (8.3Ø) Ø .680 +/- .015
SUFFIX MOUNTING HOLE CONFIGURATION
x 82˚ COUNTERSINK
(Ø17.3) 8 PLACES
NONE Standard Configuration as shown in drawing
-A 1/4 -28 Threaded inserts in both retaining bars
-B 1/4 - 28 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M 6 x 1.0 Threaded inserts in both
retaining bars
-D M 6 x 1.0 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM05008-1 3.25 4.00 625 1.0 190 1.0 210 1.0 400 1.5
CM05008-2 3.50 4.13 475 1.1 150 1.1 160 1.1 300 2.0
CM05008-3 3.75 4.75 275 1.3 70 1.5 110 1.5 250 2.3
CM05008-4 4.25 5.25 200 1.5 55 1.6 75 1.6 170 2.8
CM05008-5 4.90 5.65 120 1.8 50 1.7 40 1.7 130 3.5
CM05008-6 5.40 6.13 100 2.0 38 2.0 35 2.0 90 4.0
CM05008-7 6.10 7.10 60 2.2 28 2.2 30 2.2 55 4.5

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

167
 Cablemount Mount Series (CM06258)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

SUFFIX MOUNTING HOLE CONFIGURATION
.410Ø +/- .005 THRU (10.4Ø) Ø .540 +/- .015
x 82˚ COUNTERSINK
(Ø19.8) 8 PLACES NONE Standard Configuration as shown in drawing
-A 3/8 - 24 Threaded inserts in both retaining bars
-B 3/8 - 24 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M 10 x 1.5 Threaded inserts in both
retaining bars
-D M 10 x 1.5 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM06258-1 3.50 4.00 1300 1.2 325 1.2 200 1.2 800 1.8
CM06258-2 3.90 4.40 800 1.4 250 1.4 190 1.4 450 2.3
CM06258-3 4.30 5.30 625 1.8 130 1.8 150 1.2 325 2.8
CM06258-4 4.70 6.00 440 2.2 110 2.2 145 2.2 275 3.2
CM06258-5 5.00 6.50 350 2.5 70 2.5 130 2.5 175 3.6

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

168
 Cablemount Mount Series (CM08758)
Dimensions & Load Ratings

MOUNTING HOLE STANDARD CONFIGURATION

.530Ø +/- .005 THRU (Ø13.5) Ø .960 +/- .015
SUFFIX MOUNTING HOLE CONFIGURATION
x 82˚ COUNTERSINK
(Ø24.4) 8 PLACES
NONE Standard Configuration as shown in drawing
-A 1/2 - 13 Threaded inserts in both retaining bars
-B 1/2 - 13 Threaded inserts in one retaining bar
and standard configuration as shown in drawing
in other retaining bar
-C M 12 x 1.75 Threaded inserts in both
retaining bars
-D M 12 x 1.75 Threaded inserts in one retaining
bar and standard configuration as shown in
drawing in other retaining bar
w/90˚ countersink
-E Standard configuration as shown in drawing w/
90˚ countersink

PART # DIMENSIONS COMPRESSION SHEAR ROLL 45˚ COMP/ROLL

H W Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection Load Rating Max. Deflection
CM08758-1 5.25 5.50 1500 1.8 400 2.1 350 2.1 875 2.5
CM08758-2 6.00 6.50 1000 2.1 300 2.6 300 2.6 750 3.2
CM08758-3 6.25 7.00 900 2.3 225 2.9 238 2.9 600 3.8
CM08758-4 7.50 8.25 600 3.4 125 3.3 138 3.3 450 4.7
CM08758-5 8.50 9.25 400 4.2 100 4.0 125 4.0 250 6.4

Natural Frequency at rated load = approx. 10 Hertz

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

169
 Cablemount Mount Series
Performance Characteristics

CM000628 PERFORMANCE CHARACTERISTICS

CM00938 PERFORMANCE CHARACTERISTICS

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

170
 Cablemount Mount Series
Performance Characteristics

CM01258 PERFORMANCE CHARACTERISTICS

CM01878 PERFORMANCE CHARACTERISTICS

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

171
 Cablemount Mount Series
Performance Characteristics

CM02508 PERFORMANCE CHARACTERISTICS

CM03756 PERFORMANCE CHARACTERISTICS

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

172
 Cablemount Mount Series
Performance Characteristics

CM03758 PERFORMANCE CHARACTERISTICS

CM05006 PERFORMANCE CHARACTERISTICS

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

173
 Cablemount Mount Series
Performance Characteristics

CM05008 PERFORMANCE CHARACTERISTICS

CM06258 PERFORMANCE CHARACTERISTICS

Dimensions and data are subject to

change without notice.
For technical, design, or application
assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

174
 Cablemount Mount Series
Performance Characteristics

CM08758 PERFORMANCE CHARACTERISTICS

Dimensions and data are subject to change without notice.

For technical, design, or application assistance, call toll free:

1-800-BARRY MA

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

175
 Casters

• LO-G Industrial Series (100-300#)

• LO-G Industrial Series (900#)
• Twin-Wheel Medical Caster (Custom)

176
 100-300# LO-G INDUSTRIAL SERIES CASTERS
Innovative caster design protects mobile equipment from
mechanical shock and vibration.

Features
• Double race ball bearings

• Mounting interface top-plate or stem

• Patented shock & vibration attenuation

system

• Non-marking, non-flatspotting wheel

Benefits
• Exceptional rollability & maneuvering

• Reduces up to 50 times the amount of

energy transmitted into equipment
versus conventional caster design

• Rolls easily over bumps & thresholds LO-G Industrial Casters provide shock Applications
attenuation and ease of maneuverability • Computer storage cabinets
• Protects equipment from external shock for portable equipment over bumps, • Industrial medical equipment
• Mobile diagnostic equipment
rough surfaces, thresholds and other
Load Range • Sensitive manufacturing
obstacles for a wide range of applications. equipment
• Load ratings from 100-300 lbs. • Materials handling systems
• Photographic Imaging Equipment

NATURAL FREQUENCY 7-15 Hertz

MATERIALS Steel, Neoprene, Solid elastomer wheel
LOAD RATING 100-300 lbs.
SWIVEL RADIUS @ MAX. DEFLECTION 3.12”, 3.37”, 3.63”, 3.87”
OVERALL HEIGHT (UNLOADED) 4.6”,4.85”,5.75”,6.0”
WHEEL DIAMETERS 2.5”,3.0”,3.5”4.0”

Environmental Data
• Operating temperature range is -40˚F to +180˚F.
• Materials are compatible with most commercial, industrial or institutional environments.
• Alternate elastomers are available upon special order.

177
 100-300# LO-G Industrial Series Caster
Dimensions & Performance Characteristics

PART # LOAD RATING

26130-01 100 lbs.
26130-02 200 lbs.
26130-03 300 lbs.

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

178
 900# LO-G INDUSTRIAL SERIES CASTERS
Innovative caster design protects mobile equipment from
mechanical shock and vibration.

Features
• Double race ball bearings

• Mounting interface top-plate or stem

• Patented shock & vibration attenuation

system

• Non-marking, non-flatspotting wheel

Benefits
• Exceptional maneuverability

• Reduces up to 50 times the amount of

energy transmitted into equipment
versus conventional caster design LO-G Industrial Casters provide shock Applications
attenuation and ease of maneuverability • Computer storage cabinets
• Rolls easily over bumps & thresholds for portable equipment over bumps, • Industrial medical equipment
• Mobile diagnostic equipment
rough surfaces, thresholds and other • Sensitive manufacturing
• Protects equipment from external shock
obstacles for a wide range of applications. equipment
Load Range • Materials handling systems
• Photographic Imaging Equipment
• Load ratings to 900 lbs.

NATURAL FREQUENCY 8-12 Hertz

MATERIALS Steel, Neoprene, Solid elastomer wheel
LOAD RATING 900 lbs.
SWIVEL RADIUS @ MAX. DEFLECTION 3.12”, 3.37”, 3.63”, 3.87”
OVERALL HEIGHT (UNLOADED) 5.5”,6.0”,6.5”,7.0”
WHEEL DIAMETERS 3.0”,4.0”,5.0”,6.0”

Environmental Data
• Operating temperature range is -40˚F to +180˚F.
• Materials are compatible with most commercial, industrial or institutional environments.
• Alternate elastomers are available upon special order.

179
 900# LO-G Industrial Series Caster
Dimensions & Performance Characteristics

THRESHOLD TESTING
HEIGHT # OF OBSTACLES LOAD SPEED
3/4” 9,000 700 lb. 3 mph

PART # LOAD RATING

26150-02 900 lbs.

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

180
 TWIN-WHEEL LO-G MEDICAL SERIES CASTERS (CUSTOM)
Innovative caster design protects mobile equipment from
mechanical shock and vibration.

Features
• Precision sealed ball bearings

• Mounting interface top-plate or stem

• Patented shock & vibration attenuation

system

• Non-marking, non-flatspotting wheel

• Faring, sleeve and hub caps off-white

Santoprene design

Benefits
• Exceptional maneuverability

• Reduces up to 50 times the amount of

energy transmitted into equipment
versus conventional caster design LO-G Twin-Wheel Medical Series casters Applications
combine a compact, low-profile design • Ultrasound equipment
• Rolls easily over bumps & thresholds • Portable CAT scan equipment
with unmatched shock isolation character-
• Mobile diagnostic equipment
• Protects equipment from external shock istics for exceptional rollability and • Radiology Equipment
maneuverability. The Twin Wheel Medical • Critical care hospital beds
• Cosmetically appealing Caster is perfect for use on highly sensitive • Mobile anesthesia equipment
mobile diagnostic equipment.
Load Range
• Load ratings from 100-250 lbs.
NATURAL FREQUENCY 7-10 Hertz
MATERIALS Off-white Santoprene, steel, neoprene
LOAD RATING 100-250 lbs.
SWIVEL RADIUS @ MAX. DEFLECTION 5.6”
OVERALL HEIGHT (UNLOADED) 8.6”
WHEEL DIAMETERS 6”

Environmental Data
• Operating temperature range is -40˚F to +180˚F.
• Materials are compatible with most commercial, industrial or institutional environments.

181
 Twin Wheel LO-G Medical Series Caster (Custom)
Dimensions & Performance Characteristics

THRESHOLD TESTING
HEIGHT # OF OBSTACLES LOAD SPEED
1” 7,000 230 lb. 3 mph

PART # LOAD RATING

26605-1 250 lbs.

Dimensions and data are subject to

change without notice.

For technical, design, or application

assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

182
Specialty Isolators

• Barry V Mounts
• Barry Spring Pivot
• Marine Mounts
• Navy Mounts

183
 V MOUNT SERIES
Engine mounts isolate vibration, absorb shock and attenuate
noise due to structure-borne vibrations.

Features
• Low natural frequency (9-10 Hertz)

• Long, dependable service life

• Off-the-shelf availability

• Proven durability

Benefits
• Improved ride comfort

• Prevents mechanical noise transmission

• Ensures drivetrain alignment

Barry V-Spring Engine mounts isolate Applications
• Eliminates minor shake vibration, absorb shock and attenuate • Class 6,7,8 truck engines
noise due to structure-borne vibration. • Bus engines
• Superior V-mount isolation • Off-highway vehicle engines
These mounts feature uniquely tuned stiff- • On & off-highway vehicle cabs
Load Range nesses to achieve optimum performance
and ride comfort.
• 3 load ratings from 5 - 20 lbs.
per mount

NATURAL FREQUENCY 9-10 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
RESILIENT ELEMENT Natural rubber (Neoprene Optional)
STANDARD MATERIALS High strength steel
WEIGHT 4.3 lbs. (w/snubber)

Environmental Data
• Natural rubber elastomer has an operating temperature range of -30˚C to +70˚C.
• Neoprene elastomer has an operating temperature range of -30˚C to +70˚C.

184
V Mount Series
Dimensions & Performance Characteristics

LOAD & STIFFNESS CHARACTERISTICS

Part # Load Range Vertical Deflection Nominal Static Characteristics
lbs. N in. mm Vertical Lateral Longitudinal
lbs./inch N/mm lbs./inch N/mm lbs./inch N/mm

27330-1 1,150-1,400 5,110-6,220 .10” 2.5 13,000 2,280 6,500 1,140 19,500 342

27330-2 950-1,200 4,220-5,330 .11” 2.9 9,400 1,650 4,700 825 14,000 2,457

V-SPRING MOUNT

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

185
 SUSPENSION PIN/BUSHING ASSEMBLY
Significantly extends service life of suspension components in
vehicular applications.

Features
• Rugged crimped construction

• High load capacity

• Tight tolerance

• High compression elastomer

Benefits
• Eliminates need for lubrication

• Extra long service life

• Withstands high impact shock and

+/- 7˚ torsional rotation
Barry Suspension Pin/Bushing Assembly Applications
is designed and constructed for • Medium & Heavy-Duty Truck/
• Provides vibration, shock and maintenance free and consistent Tractor Front & Rear Suspension
noise attenuation Assemblies
service life. These superior parts will
outlast the predicted life of modern
Load Range
heavy-duty leaf spring suspension in
• 2,000 lbs. to 4,500 lbs. per pin vehicular applications.

RESILIENT ELEMENT Natural Rubber

STANDARD MATERIALS High Strength Steel
WEIGHT 2.5 lbs.

Environmental Data
• Natural Rubber elastomer has an operating temperature range of -25˚F to +160˚F
(-30˚C to +70˚C)

186
Suspension Pin/Bushing Assembly
Dimensions & Performance Characteristics

SUSPENSION PIN/BUSHING ASSEMBLY

Dimensional Drawing

SUSPENSION PIN/BUSHING ASSEMBLY

Radial Load vs. Deflection
12

10

8
Load (kilo-lbs)

0
0 0.01 0.02 0.03 0.04 0.05
Deflection (in)

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807 1-800-BARRY MA

187
 MARINE MOUNT SERIES
Effective reduction of noise and vibration of internal combustion
diesel engines in marine installations.

Features
• Mechanically captive

• Resilient elements of oil-resistant

Neoprene

• Corrosion resistant exposed

metal parts

• Off-the-shelf availability

• Easy to install

• Proven durability

• Height adjustability
Barry Controls Marine Mounts are Applications
designed to provide effective noise and • Marine Diesel Engines
Benefits
vibration isolation of marine engines up • Pumps
• Improved ride comfort • Compressors
to, but not limited to, 1,000 hp.
• Generator Sets
• Significantly reduces mechanical
noise transmission One of the most important features of
Barry Controls Marine Mounts is their
• Able to transmit propeller thrust
ability to isolate vibration while transmit-
longitudinally along mount
ting full propeller thrust, efficiently isolat-
• Superior isolation at start-up ing engine noise and vibration from the
and low RPMs hull of the vessel.
Load Range
This improves the reliability of equip-
• 4 versions with 17 load ratings
ment, and provides unmatched occupant
from 39 - 1,980 lbs. per mount
comfort, particularly during start up or
while at low RPMs.

Environmental Data
• Neoprene elastomer has an operating temperature range of -20˚F to +180˚F (-30˚C to +85˚C)
and is resistant to oils, salt spray, ozone and oil-based solvents.

188
Marine Mount Series (F50)
Dimensions & Performance Characteristics

F50 Marine Mounts are compact, cap-

tive marine isolators designed to sup-
port lightweight loads from 39-380 lbs.
per mount.
They provide effective noise and vibra-
tion isolation of marine engines up to
LOAD DIRECTION
250 horsepower.

NATURAL FREQUENCY 10-16 Hertz

3.34 MAX
TRANSMISSIBILITY AT RESONANCE 8:1
2.72 MIN

RESILIENT ELEMENT Neoprene

STANDARD MATERIALS Corrosion resistant steel
& Aluminum
WEIGHT 1.65 lbs.

PART # LOAD RANGE (lbs.) MINIMUM MAXIMUM

30 60 90 120 150 200 300 400 LOAD (lbs.) LOAD (lbs.)

F50-1-1 39 99

F50-1-2 60 160

F50-1-3 90 231

F50-1-4 121 300

F50-1-5 160 380

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

189
 Marine Mount Series (27166)
Dimensions & Performance Characteristics

NOTE: SEE BELOW FOR 3/4 STUD INFORMATION

27166 Marine Mounts are compact, captive marine

isolators designed to support light to medium loads
from 138-750 lbs. per mount.
They provide effective noise and vibration isolation of
marine engines up to 400 horsepower.

LOAD DIRECTION

NATURAL FREQUENCY 10-16 Hertz

TRANSMISSIBILITY AT RESONANCE 8:1
5.01 MAX RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Corrosion resistant steel
3.86 MIN

& Aluminum
6.57 .47 WEIGHT 4.25 lbs.

PART # LOAD RANGE (lbs.) MINIMUM MAXIMUM

0 100 200 300 400 500 600 700 800 LOAD (lbs.) LOAD (lbs.)

27166-4* 138 225

27166-7+ 190 350

27166-6 300 500

27166-3 450 750

* Order Part #27166-8 for 3/4” stud and adjustability from 4.82 max to 3.51 min.
+ Order Part #27166-9 for 3/4” stud and adjustability from 4.82 max to 3.51 min

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

190
 Marine Mount Series (27391)
Dimensions & Performance Characteristics

27391 Marine Mounts are compact, captive marine iso-

lators designed to support medium loads from 125-
1000 lbs. per mount.
They provide effective noise and vibration isolation of
marine engines up to 500 horsepower and are ideal for
V-drive applications.
LOAD DIRECTION

1.00-14 UNS-2A

4.20
NATURAL FREQUENCY 8-14 Hertz
TRANSMISSIBILITY AT RESONANCE 8:1
5.54 MAX
4.30 MIN
RESILIENT ELEMENT Neoprene
STANDARD MATERIALS Corrosion resistant steel
& Aluminum
WEIGHT 6.15 lbs.

PART # LOAD RANGE (lbs.) MINIMUM MAXIMUM

125 250 500 750 1,000 LOAD (lbs.) LOAD (lbs.)

27391-2 125 275

27391-3 250 500

27391-4 350 750

27391-5 500 1,000

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

191
 Marine Mount Series (27458)
Dimensions & Performance Characteristics

27458 Marine Mounts are compact, captive marine

isolators designed to support medium to heavy loads
from 350-1,980 lbs. per mount.
They provide effective noise and vibration isolation of
marine engines up to 1,000 horsepower and are ideal
for V-Drive applications.
LOAD DIRECTION

NATURAL FREQUENCY 10-16 Hertz

6.65 MAX TRANSMISSIBILITY AT RESONANCE 8:1
5.45 MIN

RESILIENT ELEMENT Neoprene

STANDARD MATERIALS Corrosion resistant steel
& Aluminum
WEIGHT 10.6 lbs.

PART # LOAD RANGE (lbs.) MINIMUM MAXIMUM

300 500 1,000 1,500 2,000 LOAD (lbs.) LOAD (lbs.)

27458-2 350 814

27458-3 506 1,056

27458-4 726 1,430

27458-5 880 1,980

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

192
 NAVY MOUNT SERIES
Features Navy mounts are U.S. Navy developed Applications
• Rugged Construction and QPL approved mounts commonly • Mounting of power generating

• Corrosion Resistant known as Portsmouth, EES and Mare equipment in marine applications
Island mounts for use in mounting power
• Navy Designed & Approved
generating equipment. These mounts
Benefits resist high impact shipboard shocks and
prevent structure-borne noise.
• Reduces transmission of vibration from
equipment to hull structure
Part Numbering Systems
• Provides effective reduction of structure-
borne noise • Natural Frequency is the numerical prefix of the Navy type number and
indicates the axial natural frequency of the mount when loaded to its
Load Range specified capacity.
• Design Activity is the single letter following the numerical prefix:
• Several designs with load ratings M = Mare Island Naval Shipyard, P = Portsmouth Naval Shipyard,
from 15 lbs to 10,000 lbs per mount E = Engineering Experimental Station, B = NAVSHIPS.
• Capacity is the numbers following the design activity designation and
indicates the maximum rated capacity of the mount in pounds.
• Metal Member: If non-magnetic construction is required, NM should be
added to the end of the Navy Mount part number. Suffix “H” denotes
natural rubber only (5,000 and 10,000 lbs. mounts).

6 - E - 100 - NM

6 Hz Natural Frequency
Design Activity
(Eng. Experimental Station)
Load Capacity
(100 lbs.)
Non-Magnetic Construction

Environmental Data
• Naval mounts are fully qualified to the following military specifications: MIL-M-19379 (10M/11M
Series) MIL-M-17191 (15P Series), MIL-M-17508 (6E and 7E Series), MIL-M-21649 (5M10000)
and MIL-M-19863 (5B5000H).

193
 Navy Mount Series (Mare Island Mounts)
Dimensions & Performance Characteristics
NAVY MOUNT 31110-2 NAVY MOUNT 31110-1

Ø.328
Ø.281 [8.3]
[7.1] 2 HOLES
2 HOLES Ø.391
Ø.281 [9.9]
[7.1] THRU
THRU

2.375
1.750 [60.3]
[44.5]

3.5
2.00 [88.9]
[50.8]
4.25
2.75 [108.0]
[69.9]

.188
.125 [4.8]
[3.2]

2.25 1.32
1.375 .81 [33.4]
[20.6] [57.2]
[34.9]

.375
.25 [9.5]
[6.4]

2.00
1.375 [50.8]
[34.9]

NAVY MOUNT 31111-1

Navy Capacity Natural

Part # Type # (lbs) Frequency Weight
31110-2 11M15 15 11 Hz 1 lb.
31110-1 11M25 25 11 Hz 1 lb.
31111-1 10M50 50 10 Hz 1 lb.
31114-1 6E100 100 6 Hz 2.8 lbs.
31115-1 7E450 450 7 Hz 4.5 lbs.
31114-3 6E900 900 6 Hz 18 lbs.

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:

1-800-BARRY MA
Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

194
Navy Mount Series (EES Machinery Mounts)
Dimensions & Performance Characteristics
NAVY MOUNT 31114-1 NAVY MOUNT 31114-2

NAVY MOUNT 31115-1 NAVY MOUNT 31114-3

Dimensions and data are subject

to change without notice.

For technical, design, or applica-

tion assistance, call toll free:
Barry Controls 1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

195
 Navy Mount Series (EES Machinery Mounts & 5B5000H)
Dimensions & Performance Characteristics
NAVY MOUNT 31114-4

Navy Capacity Natural Weight

Part # Type # (lbs) Frequency (lbs.)
31114-4 6E2000 2000 6 Hz 28.6

All Parts of Type 31120 have 5000 lb capacity and 5 Hz Natural Frequency
Part # A B C D E F
31120-1-0 - - - - - -
31120-1-4 10.75 1.125 5.75 - 1.125 1.281
31120-1-6 11.25 .875 6.5 3.25 .75 .906

Part Numbers 31120-1-0 through 31120-1-6 Part Number 31121-1

Navy Type Number 5B5000H Auxiliary Snubber for P/N 31120-1

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:

Barry Controls 1-800-BARRY MA

40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

196
Navy Mount Series (5M10000H)
Dimensions & Performance Characteristics
Part Number 31116-1 Part Number 31117-1

Part # Navy Type # Description Load Rating Natural Frequency Weight

31116-1 5M10000H Complete Assembly 10000 lbs 5 Hz 98.5 lbs.
31117-1 5M10000H Compression Element for for 13.2 lbs.
31118-1 5M10000H Shear Element complete complete 14.1 lbs.
31119-1 5M10000H Snubber Element assembly assembly 71.1 lbs

Part Number 31118-1 NAVY MOUNT 31119-1

Barry Controls
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

197
 Navy Mount Series (UBST and EES Back-to-back Mounts)
Dimensions & Performance Characteristics

UBST Un-bonded Spool Mount Series

Part # Navy Type # Capacity (lbs)

21482-1 UBST-15 15
21482-2 UBST-50 50
21482-3 UBST-100 100
21482-4 UBST-200 200
22416-1 6E100BB 100
22417-1 6E150BB 150
31114-5 6E900BB 900
31115-2 7E450BB 450

EES Back-to-Back Series

Dimensions and data are subject

to change without notice.
For technical, design, or applica-
tion assistance, call toll free:
Barry Controls
1-800-BARRY MA
40 Guest Street • Brighton, MA 02135-9105 • (617) 787-1555 • Fax (617) 787-7807

198
Notes
Notes