AnyCast

WIRELESS DISPLAY ADAPTER

If you face problem doing setup of this
device, please feel free to contact our
customer service hotline
USER MANUAL
+91-8822119977
A huge range of HOW TO videos are
available on youtube, you can also refer
same in case you require.

You can also visit our website for

detailed user manual
https://www.everycom.in/anycast

Thank you for choosing Anycast.

CUSTOMER SUPPORT
+91-8822119977
®
A PRODUCT BY EVERYCOM
 User Manual Setup for your AnyCast Dongle
Rev 2.00

Download APP for If AnyCast connected to your Home WiFi Network/Router, then
please connect your phone or laptop to the same Home WiFi
iOS / Android Router. Launch the Web Browser on your Phone or Laptop,
then access the IP address 192.168.203.1 or the IP shown on
Scan QR code on screen to the Tv’s main screen to enter the AnyCast Setup Page.
download APP for quick connection If AnyCast Dongle is not connected to any Home WiFi
and setup. Network/Router, Anycast displays its own WiFi network &
Password on the main screen. Connect your Phone or Laptop
with AnyCast’s WiFi, Once connected launch the browser and
enter IP 192.168.203.1 to open up the setting portal. Navigate
Video Guide to WiFi settings and connect the AnyCast with your home WiFi
http://youtube.com/WiFiDisplayRe network.
ceiverAnycast
Subscribe to our handy videos to Settings and Firmware Upgrade
learn more about mirroring with 1. Internet : Connect your AnyCast to your Local/Home WiFi
Network. Note : The connection between AnyCast and your
AnyCast. device may be disconnected when AnyCast connects to
Local/Home WiFi network Instead.

User Tips 2. Password : Change the password of AnyCast Dongle

http://www.everycom.in/Anycast 3. Resolution : Output resolution of AnyCast

4. EZAir mode : Mirror only ( recommended) Mirror+streaming

for iOS 11.1 and 11.2
5. Upgrade : Upgrade the firmware of AnyCast Dongle
Customer Service
09818398143
[email protected]
We’d love to hear from you.

1 10
 Hardware Installation Companion App - EZMira
Download and install EZMira to your Windows 10 Laptop from
https://Any-Cast.com/app-download
Then you may mirror Windows to AnyCast using EZMira as
below.

1. Turn on your TV and Power up the AnyCast

Dongle by connecting the USB cable from the
Dongle to a USB adapter (5V1A). Please place
the WiFi receiver at a location with good WiFi
Reception.
2. Connect the Anycast Dongle directly into an
HDMI input port of your TV.
3. Set your Tv’s source/Input selection to
HDMI input port connected to the AnyCast
Dongle.

4. Your AnyCast Dongle now starts up and will

display instructions on your TV screen. Follow
the instructions to complete setup.

2 9
 Setup for iOS Setup for Windows 10
( iPhone, iPad, iPod ) 1. Wait for AnyCast main screen after powering on the Dongle.
2. Anycast displays its own WiFi network & Password on the main
screen. Connect your Laptop with AnyCast’s WiFi, Once
connected launch the browser and enter IP 192.168.203.1 to
open up the setting portal. Navigate to WiFi settings and connect
the AnyCast with your home WiFi network.
3. Once AnyCast is successfully connected with your home WiFi
network it will be displayed on the Tv’s main screen.
4. On your Laptop Go to “ACTION CENTER” and choose “Project”
and then “Connect to a wireless display” , Choose AnyCast.
5. Your Laptop screen will be shown on your TV through
AnyCast.

1. Wait for AnyCast main screen after powering on the Dongle

2. Anycast displays its own WiFi network & Password on the main
screen. Connect your iOS device with AnyCast’s WiFi, Once
connected launch the browser and enter IP 192.168.203.1 to
open up the setting portal. Navigate to WiFi settings and connect
the AnyCast with your home WiFi network.

3. Once AnyCast is successfully connected with your home WiFi

network it will be displayed on the Tv’s main screen.

4. Connect your iOS device to your home WiFi network. Swipe

up on your iOS device and tap on Airplay Mirroring,
then select AnyCast as target.

5. Your iOS device’s screen will be shown on your TV through

AnyCast.

3 8
 Setup for Mac
Setup for Android

1. Wait for AnyCast main screen after powering on the Dongle.

2. On your Android Device , open settings and look for Wireless 1. Wait for AnyCast main screen after powering on the Dongle.
Display or Miracast function & enable it. 2. Anycast displays its own WiFi network & Password on the
main screen. Connect your Mac with AnyCast’s WiFi, Once
3. Select AnyCast as target and wait for connection. connected launch the browser and enter IP 192.168.203.1
to open up the setting portal. Navigate to WiFi settings and
4. Your Android Screen will be shown on your TV, reconnect if connect the AnyCast with your home WiFi network.
necessary.
3. Once AnyCast is successfully connected with your home WiFi
Note : Different brands of Android Phone call the wireless network it will be displayed on the Tv’s main screen.
display function differently, could be MirrorShare, Miracast,
Wireless Display, Cast Screen etc.. 4. Connect your Mac to your home WiFi network. Turn on
AirPlay, then select AnyCast as target.
5. Your Mac screen will be shown on your TV through AnyCast.

4 7
Companion App - EZMira Setup for Google Home ( Android )
1. Scan QR Code on the TV Screen to download EZMira App Please connect AnyCast to your Home WiFi Network/Router in
2. Launch the EZMira App advance. Download Google Home App from Google Play.
Launch the Google Home App, login with your Google Account.
3. Click “ Connect” button to start mirroring from Android. Then you may mirror Android to AnyCast using Google Home
as in the picture.

Connect to Home WiFi Router/Network Note :

1. Wait for AnyCast main screen after powering on the Dongle. AnyCast Dongle need to be connected to Internet for using
Google Home App.
2. Anycast displays its own WiFi network & Password on the
main screen. Connect your Password on the main screen. Please be aware Android should have Google Play Services
Connect your Android device with AnyCast’s WiFi, Once in order to install Google Home.
connected launch the browser and enter IP 192.168.203.1 to
open up the setting portal. Navigate to WiFi settings and Make sure your Android Device (Mobile Phone) and AnyCast
connect the AnyCast with your home WiFi network. Dongle are connected with the same Home WiFi Network/
Router.
3. Once AnyCast is successfully connected with your home WiFi
network it will be displayed on the Tv’s main screen.

5 6