Facts Devices - - Unit 8 - Week 7 https://onlinecourses.nptel.ac.in/noc18_ee44/un...

[email protected] ▼

Courses » Facts Devices Announcements Course Ask a Question Progress Mentor FAQ

Unit 8 - Week 7

Course
outline
Assignment 7
The due date for submitting this assignment has passed.
How to access As per our records you have not submitted this Due on 2018-09-26, 23:59 IST.
the portal assignment.

Week 1 Each question has “1” mark and there is no negative mark
1) A single-phase unified power quality compensator (consisting of a DSTATCOM and a DVR 1 point
Week 2
using two VSCs with a common DC bus capacitor) is to be designed for a load of 230 V, 50 Hz, 25 A, 0.8
lagging power factor as a left-hand UPQC-Q, it used to provide reactive power compensation of the load
Week 3
for unity power factor at the AC mains with a constant regulated voltage of 230V at 50 Hz across the load.
Week 4 There is a voltage sag of -10% in the supply system with a base value of 230 V. Calculate the voltage rating
of the DVR (SSSC connected in distributed system )of the UPQC-Q,….
Week 5
49.32 V
Week 6
38.6 V

Week 7 44.3 V

UPQC 43.17 V
Introduction
and
No, the answer is incorrect.
Classification Score: 0

UPQC
Accepted Answers:
Classification - I 43.17 V

Operation and 2) In above question Q1, the total VA rating of the DVR of the UPQC-Q is …. 1 point
Control of
UPQC - II 1207.23 VA
Operation and 1079.25 VA
Control of
UPQC - III 984.25 VA
UPFC 921.4 VA
Quiz : No, the answer is incorrect.
Assignment 7
Score: 0
Solution for Accepted Answers:
Assignment - 7
1079.25 VA

© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -

A project of In association with

Funded by

1 of 4 Tuesday 16 October 2018 06:01 PM

Facts Devices - - Unit 8 - Week 7 https://onlinecourses.nptel.ac.in/noc18_ee44/un...

11.45 Powered
A by

No, the answer is incorrect.

Score: 0
Accepted Answers:
11.45 A

4) In above question Q1, Total VA rating of the UPQC-Q 1 point

2345.25 VA

1745.25 VA

4529.25 VA

5684.25 VA

No, the answer is incorrect.

Score: 0
Accepted Answers:
4529.25 VA

5) A single-phase unified power quality compensator (consisting of a DSTATCOM and a DVR 1 point
using two VSCs with a common DC bus capacitor) is to be designed for a load of 230 V, 50 Hz, 25 A, 0.8
lagging power factor as a left-hand UPQC-P, used to provide reactive power compensation for unity power
factor at the AC mains with a constant regulated voltage of 230V at 50 Hz across the load. There is a
voltage swell of +10% in the supply system with a base value of 230 V. Calculate the voltage rating of the
DVR of the UPQC-P,….

28.05 V

26.12 V

29.95 V

24.58 V

No, the answer is incorrect.

Score: 0
Accepted Answers:
28.05 V

6) In above question Q5, the total VA rating of the DVR of the UPQC-P is …. 1 point

1028 VA

701 VA

870 VA

685 VA

No, the answer is incorrect.

Score: 0
Accepted Answers:
701 VA

7) In above question Q5, The current rating of the DSTATCOM of the UPQC-P is …. 1 point

12.7 A

13.9 A

14.5 A

14.7 A

No, the answer is incorrect.

2 of 4 Tuesday 16 October 2018 06:01 PM

Facts Devices - - Unit 8 - Week 7 https://onlinecourses.nptel.ac.in/noc18_ee44/un...

Score: 0
Accepted Answers:
13.9 A

8) In above question Q5, Total VA rating of the UPQC-P 1 point

4496 VA

4296 VA

3296 VA

3496 VA

No, the answer is incorrect.

Score: 0
Accepted Answers:
4496 VA

9) A single-phase unified power quality compensator (consisting of a DSTATCOM and a DVR 1 point
using two VSCs with a common DC bus capacitor) is to be designed for a load of 230 V, 50 Hz, 25 A, 0.8
lagging power factor as a left-hand UPQC-Q used to t provide reactive power compensation of the load for
unity power factor at the AC mains with a constant regulated voltage of 230V at 50 Hz across the load.
There is a voltage swell of +10% in the supply system with a base value of 230 V. calculate the voltage
rating of the DVR of the UPQC-Q

32.13 V

34.12 V

35.64 V

36.58 V

No, the answer is incorrect.

Score: 0
Accepted Answers:
35.64 V

10)In above question Q9, VA rating of the DVR of the UPQC-Q is, 1 point

891.15 VA

981.31 VA

1032.42 VA

1123.45 VA

No, the answer is incorrect.

Score: 0
Accepted Answers:
891.15 VA

Previous Page End

3 of 4 Tuesday 16 October 2018 06:01 PM

Facts Devices - - Unit 8 - Week 7 https://onlinecourses.nptel.ac.in/noc18_ee44/un...

4 of 4 Tuesday 16 October 2018 06:01 PM