Page 1 of 28

SLAB DESIGN CALCULATIONS

Project Name : TWO-STOREY COMMERCIAL BUILDING W/ WAREHOUSE AND
STORAGE
Client Name : RASMIA P. SEDIK
Engineer Name : Engr.
Design File : D:\Download 05162019\bass\STAAD\SLAB FRAME RCDC\SLAB
FRAME RCDC.rcdx
Analysis File : D:\Download 05162019\bass\STAAD\SLAB FRAME\SLAB
FRAME.std
Analysis Last Modified : 5/21/2019 7:38:52 AM

NOTES:
1. Density of concrete assumed as 25 kN/Cum.

Definitions Of Terms: :
Ratio of flexural stiffness of beam section to flexural
1. αf =
stiffness of slab.
Ratio of torsional stiffness of edge beam section to
2. βt =
flexural stiffness of slab.
3. Φt = Strength reduction factor.
4. As = Area of Tension reinforcement required in sqmm.
5. As,min = Min area of flexural reinforcement in sqmm.
Area of longitudinal reinforcement provided at given
6. AstPrv =
section in sqmm.
Total area of longitudinal reinforcement calculated at a
7. Ast =
given section in sqmm.
8. b = Width of the Slab in mm.
9. B1 to B4 = Width of beams around slab in mm.
10. Cc = Effective Cover to tension reinforcement in mm.
11. deff = Effective depth of slab in mm.
12. D1 to D4 = Depth of beams around slab.
13. Mu = Factored Bending Moment at a section in kNm.
14. Ptmin = Minimum percentage steel as per clause 10.
15. PtPrv = Provided percentage steel.
16. Vc = Nominal shear strength provided by concrete in kN.
17. Vu = Factored Shear Force at a section in kN.
18. Vud = Design Shear Force in kN.
Length of clear span in direction that moment are
19. Ln =
being determined in mm.
20. L2 = Length of adjacent span of Ln in mm.
21. lb1 to lb2 = Moment of inertia of beams around slab in mm4.
cross-sectional constant to define torsional properties
22. CA and CB =
of slab and beam.

5/23/2019
 Page 2 of 28

Code References :
ACI 318M:2011

Item CLAUSE / TABLE

1. Ptmax : 10.3.5
2. Ptmin : 7.12.2.1/10.5.4
3. Vc : 11.11.2.1
4. Av : 11.4.7.2
5. Moment calculations : 13.6
6. spacing between main bars : 10.5.4
7. spacing between distribution bars : 7.12.2.2
8. Minimum reinforcement : 7.12.2.1

Slab No. : S11

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 4.150 m
Short Span, Lx = 3.680 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 250 200 200
        D (mm) 400 400 350 350
        Ib (mm4)    x106 1333.33 1333.33 714.58 714.58
Adjacent Slab
        Thk (mm) 125 125 125 125
        Span (mm) 3680 1430 3670 4270
        Ib (mm4)    x106 598.96 415.85 636.39 685.22

5/23/2019
 Page 3 of 28

αf lx, αf ly 2.23 3.21 1.12 1.04

αf 1.9
Ln (mm) 3430 3950
L2 (mm) 2175 1965
Total BM (kNm) 54.98 65.88
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 46.19 55.34
        CS Moment (kNm) 32.87 39.38
        MS Moment (kNm) 13.32 15.95
        Moment on Beam (kNm) 27.94 33.48
        Design Moment M1, M3 (kNm) 4.93 5.91
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 8.8 10.54
        CS Moment (kNm) 6.26 7.5
        MS Moment (kNm) 2.54 3.04
        Moment on Beam (kNm) 5.32 6.38
      Design Moment M2, M4 (kNm) 0.941 1.13

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 4.931 kNm
Area Of Reinforcement = 135.843 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 5.907 kNm
Area Of Reinforcement = 182.337 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm

5/23/2019
 Page 4 of 28

Distribution Reinforcement @ 0.18% -

Area Of Reinforcement = 180.000 sqmm
Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 5 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 15.815 kN
Nominal Shear, Vc = 76.026 kN
> 15.815 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 17.606 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 17.606 Slab Is Safe In Shear

Slab No. : S12

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 4.150 m
Short Span, Lx = 3.680 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 250 200 200
        D (mm) 400 400 350 350
        Ib (mm4)    x106 1333.33 1333.33 714.58 714.58
Adjacent Slab
        Thk (mm) - 125 125 125
        Span (mm) - 3680 3670 4270
        Ib (mm4)    x106 299.48 598.96 636.39 685.22
αf lx, αf ly 4.45 2.23 1.12 1.04
αf 2.21

5/23/2019
 Page 6 of 28

Ln (mm) 3430 3950

L2 (mm) 2175 1965
Total BM (kNm) 54.98 65.88
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 46.19 55.34
        CS Moment (kNm) 32.87 39.38
        MS Moment (kNm) 13.32 15.95
        Moment on Beam (kNm) 27.94 33.48
        Design Moment M1, M3 (kNm) 4.93 5.91
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 8.8 10.54
        CS Moment (kNm) 6.26 7.5
        MS Moment (kNm) 2.54 3.04
        Moment on Beam (kNm) 5.32 6.38
        Design Moment M2, M4 (kNm) 0.941 1.13

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 4.931 kNm
Area Of Reinforcement = 135.843 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 5.907 kNm
Area Of Reinforcement = 182.337 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm

5/23/2019
 Page 7 of 28

Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 8 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 15.815 kN
Nominal Shear, Vc = 76.026 kN
> 15.815 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 17.606 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 17.606 Slab Is Safe In Shear

Slab No. : S16

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 3.800 m
Short Span, Lx = 1.430 m
Imposed Load, Qk = 4.800 kN/sqm
Live Load = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 1-Way
End Conditions = Simply Supported
Load Combination = 1.2 DL + 1.6 LL

Design  Moments:
Short Span Positive Moment at Mid Span -
Moment Coefficient, M1 = 0.1250
Mu (M1 x TL(ultimate) x Lx x Lx) = 4.394 kNm
Area Of Reinforcement Required = 120.839 kN/sqmm
(BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment at Continuous Support -
Moment Coefficient, M2 = N.A.
Mu (M2 x TL(ultimate) x Lx x Lx) = N.A. kNm
Area Of Reinforcement Required -

5/23/2019
 Page 9 of 28

Max. of (50% of mid-span steel, = 90.000 kN/sqmm

50% of min. steel)
Reinforcement Provided = #10 @ 195 C/C
= 363.487 kN/sqmm
All Other Sections provide Minimum Steel @ 0.18% -
Area Of Reinforcement Required = 180.000 kN/sqmm
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Shear Check :
Shear Coefficient, SF1 = 0.500
Vsx (SF1 x TL(ultimate) x Lx) = 12.291 kN
Nominal Shear, Vc = 76.026 kN
12.291  
> Slab Is Safe In Shear

Slab No. : S17

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 4.270 m
Short Span, Lx = 3.800 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 250 200 200
        D (mm) 400 400 350 350
        Ib (mm4)    x106 1333.33 1333.33 714.58 714.58
Adjacent Slab
        Thk (mm) 125 125 125 125
        Span (mm) 3080 1430 4270 3800
559.9 425.62 694.99 656.74

5/23/2019
 Page 10 of 28

        Ib (mm4)    x106

αf lx, αf ly 2.38 3.13 1.03 1.09
αf 1.91
Ln (mm) 3550 4070
L2 (mm) 2235 2025
Total BM (kNm) 60.52 72.08
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 50.84 60.55
        CS Moment (kNm) 36.24 43.16
        MS Moment (kNm) 14.6 17.38
        Moment on Beam (kNm) 30.81 36.69
        Design Moment M1, M3 (kNm) 5.44 6.47
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 9.68 11.53
        CS Moment (kNm) 6.9 8.22
        MS Moment (kNm) 2.78 3.31
        Moment on Beam (kNm) 5.87 6.99
        Design Moment M2, M4 (kNm) 1.041 1.23

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 5.436 kNm
Area Of Reinforcement = 150.044 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 6.474 kNm
Area Of Reinforcement = 200.329 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.

5/23/2019
 Page 11 of 28

= N.A. kN/sqmm
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm
Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 12 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 16.331 kN
Nominal Shear, Vc = 76.026 kN
> 16.331 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 18.128 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 18.128 Slab Is Safe In Shear

Slab No. : S18

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 3.800 m
Short Span, Lx = 3.080 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 250 200 200
        D (mm) 400 400 350 350
        Ib (mm4)    x106 1333.33 1333.33 714.58 714.58
Adjacent Slab
        Thk (mm) 125 125 125 125
        Span (mm) 2700 3800 3070 3800
        Ib (mm4)    x106 470.38 559.9 559.08 618.49
αf lx, αf ly 2.83 2.38 1.28 1.16
αf 1.91

5/23/2019
 Page 13 of 28

Ln (mm) 2830 3600

L2 (mm) 2000 1665
Total BM (kNm) 34.42 46.37
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 28.91 38.95
        CS Moment (kNm) 19.66 26.48
        MS Moment (kNm) 9.26 12.47
        Moment on Beam (kNm) 16.71 22.51
        Design Moment M1, M3 (kNm) 2.95 3.97
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 5.51 7.42
        CS Moment (kNm) 3.74 5.04
        MS Moment (kNm) 1.76 2.37
        Moment on Beam (kNm) 3.18 4.29
        Design Moment M2, M4 (kNm) 0.561 0.76

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 2.948 kNm
Area Of Reinforcement = 80.687 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 3.972 kNm
Area Of Reinforcement = 121.581 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm

5/23/2019
 Page 14 of 28

Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 15 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 13.236 kN
Nominal Shear, Vc = 76.026 kN
> 13.236 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 15.744 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 15.744 Slab Is Safe In Shear

Slab No. : S22

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 3.800 m
Short Span, Lx = 3.680 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 250 200 250
        D (mm) 400 400 350 400
        Ib (mm4)    x106 1333.33 1333.33 714.58 1333.33
Adjacent Slab
        Thk (mm) 125 125 125 -
        Span (mm) 3680 1430 4270 -
        Ib (mm4)    x106 598.96 415.85 656.74 309.24
αf lx, αf ly 2.23 3.21 1.09 4.31
αf 2.71

5/23/2019
 Page 16 of 28

Ln (mm) 3430 3575

L2 (mm) 2012.5 1965
Total BM (kNm) 50.88 53.96
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 42.74 45.33
        CS Moment (kNm) 31.63 33.55
        MS Moment (kNm) 11.1 11.78
        Moment on Beam (kNm) 26.89 28.52
        Design Moment M1, M3 (kNm) 4.75 5.03
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 8.14 8.63
        CS Moment (kNm) 6.03 6.39
        MS Moment (kNm) 2.11 2.24
        Moment on Beam (kNm) 5.12 5.43
        Design Moment M2, M4 (kNm) 0.91 0.96

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 4.745 kNm
Area Of Reinforcement = 130.650 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 5.033 kNm
Area Of Reinforcement = 154.761 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm

5/23/2019
 Page 17 of 28

Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 18 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 15.815 kN
Nominal Shear, Vc = 76.026 kN
> 15.815 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 16.314 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 16.314 Slab Is Safe In Shear

Slab No. : S23

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 3.800 m
Short Span, Lx = 3.680 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 250 200 250
        D (mm) 400 400 350 400
        Ib (mm4)    x106 1333.33 1333.33 714.58 1333.33
Adjacent Slab
        Thk (mm) 125 125 125 -
        Span (mm) 2750 3680 3800 -
        Ib (mm4)    x106 523.27 598.96 618.49 309.24
αf lx, αf ly 2.55 2.23 1.16 4.31
αf 2.56

5/23/2019
 Page 19 of 28

Ln (mm) 3430 3575

L2 (mm) 2012.5 1965
Total BM (kNm) 50.88 53.96
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 42.74 45.33
        CS Moment (kNm) 31.63 33.55
        MS Moment (kNm) 11.1 11.78
        Moment on Beam (kNm) 26.89 28.52
        Design Moment M1, M3 (kNm) 4.75 5.03
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 8.14 8.63
        CS Moment (kNm) 6.03 6.39
        MS Moment (kNm) 2.11 2.24
        Moment on Beam (kNm) 5.12 5.43
        Design Moment M2, M4 (kNm) 0.91 0.96

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 4.745 kNm
Area Of Reinforcement = 130.650 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 5.033 kNm
Area Of Reinforcement = 154.761 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm

5/23/2019
 Page 20 of 28

Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 21 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 15.815 kN
Nominal Shear, Vc = 76.026 kN
> 15.815 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 16.314 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 16.314 Slab Is Safe In Shear

Slab No. : S24

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 3.800 m
Short Span, Lx = 2.750 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 200 250 200 200
        D (mm) 350 400 350 350
        Ib (mm4)    x106 714.58 1333.33 714.58 714.58
Adjacent Slab
        Thk (mm) 125 125 125 -
        Span (mm) 3300 3680 2750 -
        Ib (mm4)    x106 492.35 523.27 533.04 309.24
αf lx, αf ly 1.45 2.55 1.34 2.31
αf 1.91

5/23/2019
 Page 22 of 28

Ln (mm) 2525 3600

L2 (mm) 2000 1487.5
Total BM (kNm) 27.4 41.42
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 23.02 34.8
        CS Moment (kNm) 14.63 22.11
        MS Moment (kNm) 8.39 12.68
        Moment on Beam (kNm) 12.43 18.79
        Design Moment M1, M3 (kNm) 2.19 3.32
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 4.38 6.63
        CS Moment (kNm) 2.79 4.21
        MS Moment (kNm) 1.6 2.42
        Moment on Beam (kNm) 2.37 3.58
        Design Moment M2, M4 (kNm) 0.421 0.63

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 2.194 kNm
Area Of Reinforcement = 59.885 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 3.317 kNm
Area Of Reinforcement = 101.243 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm

5/23/2019
 Page 23 of 28

Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 24 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 11.818 kN
Nominal Shear, Vc = 76.026 kN
> 11.818 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 15.084 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 15.084 Slab Is Safe In Shear

Slab No. : S25

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 3.800 m
Short Span, Lx = 3.300 m
Imposed Load = 4.800 kN/sqm
Live Load, Qk = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 17.190 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 200 200 200 200
        D (mm) 350 350 350 350
        Ib (mm4)    x106 714.58 714.58 714.58 714.58
Adjacent Slab
        Thk (mm) - 125 125 -
        Span (mm) - 2750 3300 -
        Ib (mm4)    x106 268.55 492.35 577.8 309.24
αf lx, αf ly 2.66 1.45 1.24 2.31
αf 1.91

5/23/2019
 Page 25 of 28

Ln (mm) 3100 3600

L2 (mm) 2000 1750
Total BM (kNm) 41.3 48.73
Bottom
        Moment Coefficent 0.85 0.84
        Distributed Moment (kNm) 34.69 40.94
        CS Moment (kNm) 24.44 28.84
        MS Moment (kNm) 10.25 12.09
        Moment on Beam (kNm) 20.78 24.52
        Design Moment M1, M3 (kNm) 3.67 4.33
Top
        Moment Coefficent 0.16 0.16
        Distributed Moment (kNm) 6.61 7.8
        CS Moment (kNm) 4.66 5.49
        MS Moment (kNm) 1.95 2.3
        Moment on Beam (kNm) 3.96 4.67
        Design Moment M2, M4 (kNm) 0.71 0.82

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 3.666 kNm
Area Of Reinforcement = 100.575 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Long Span Positive Moment At Midspan -
M3 = 4.326 kNm
Area Of Reinforcement = 132.625 kN/sqmm
Required (BM)
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. kN/sqmm
Required (BM)
Reinforcement Provided = N.A.
= N.A. kN/sqmm
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm

5/23/2019
 Page 26 of 28

Required
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm

5/23/2019
 Page 27 of 28

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 14.182 kN
Nominal Shear, Vc = 76.026 kN
> 14.182 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 16.048 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 16.048 Slab Is Safe In Shear

Slab No. : STAIRS

Level = 5.125m
Design Code = ACI 318 - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy410
Clear Cover = 20.000 mm
Long Span, Ly = 1.000 m
Short Span, Lx = 4.450 m
Imposed Load, Qk = 2.000 kN/sqm
Live Load = 4.800 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.830 kN/sqm
Span = 1-Way
End Conditions = Simply Supported
Load Combination = 1.2 DL + 1.6 LL

Design  Moments:
Short Span Positive Moment at Mid Span -
Moment Coefficient, M1 = 0.1250
Mu (M1 x TL(ultimate) x Lx x Lx) = 34.234 kNm
Area Of Reinforcement Required = 1064.345 kN/sqmm
(BM)
Reinforcement Provided = #16 @ 185 C/C
= 1073.000 kN/sqmm
Short Span Negative Moment at Continuous Support -
Moment Coefficient, M2 = N.A.
Mu (M2 x TL(ultimate) x Lx x Lx) = N.A. kNm
Area Of Reinforcement Required -

5/23/2019
 Page 28 of 28

Max. of (50% of mid-span steel, = 532.173 kN/sqmm

50% of min. steel)
Reinforcement Provided = #13 @ 195 C/C
= 649.641 kN/sqmm
All Other Sections provide Minimum Steel @ 0.18% -
Area Of Reinforcement Required = 180.000 kN/sqmm
Reinforcement Provided = #10 @ 195 C/C
= 363.000 kN/sqmm
Shear Check :
Shear Coefficient, SF1 = 0.500
Vsx (SF1 x TL(ultimate) x Lx) = 30.772 kN
Nominal Shear, Vc = 76.026 kN
> 30.772     Slab Is Safe In Shear

5/23/2019