Fixing Common Errors With Atms
Fixing Common Errors With Atms
1. Each transaction and activity is stored in the ATM tallies. If the tallies are not cleared out
they could cause the ATM to go into a fault and not work properly. The tallies should be
cleared as often as possible
2. Open top portion of ATM, you will need to switch white rocker marked directly above the
receipt holder.
3. Select (6) Logs and Tallies
i. Select (5) Hardware Tallies
1. Select (6) Detail Tallies
a. Select (1) Card reader
• Select (2) Clear
• Select (8) Continue
b. Select (2) Media Dispenser
• Select (2) Clear
• Select (8) Continue
c. Select (3) Cash Acceptor
• Select (2) Clear
• Select (8) Continue
d. Select (5) Receipt Printer
• Select (2) Clear
• Select (8) Continue
e. Select (6) Check Reader
• Select (2) Clear
• Select (8) Continue
f. Select (4) Back and repeat 2 more times to get to the
home screen
Press the blue button to the right to turn off. Wait 1 minute and press again to turn back on.
Cash Acceptor Fatal Error
1. Open top portion of ATM, you will need to switch white rocker marked directly above the
receipt holder. This will place the ATM in maintenance mode.
See below:
3. Typically any bills that might be jammed can be found in the portion of the recycler.
Please be very careful when removing bills as to not jam them further or damage the
machine
4. When there is a jam caused by a mutilated bill, none of the good bills will be routed to
the depositor cassettes until the issue is cleared. They will remain in an escrow bin until
the damaged bills are removed. After removing the jammed bills press the blue button
pictured below. This will clear any good bills left in escrow bin. Any bills that come out in
this process need to be placed in depositor cassette on the very bottom left of the ATM.
Check Acceptor Fatal Error
1. Open top portion of ATM, you will need to switch white rocker marked directly above the
receipt holder. This will place the ATM in maintenance mode.
2. Pinch the two blue taps and pull out the check acceptor recycler.
3. If members check get retain for a reason other than a jam these will be collected in the
retention bin on the top proton of the check recyclers.
4. If a there is a check that got jammed please take the following steps to find and clear the
jam.
Step one:
Step two:
Step three:
1. To find retained member cash deposit, not recorded by ATM or credited to members
account, please look in the following area:
2. Any cash taken out of this compartment, should be placed in the first depositor cassette
until next settlement day. Or if currently settling, added to deposited cash.
Deposit Adjustments
If there is any discrepancy between physical cash retrieved from cash depositor and what
is on the settlement slips please follow the steps below:
A. Sign on as vault
a. CR GL GL – For cash deposited into the ATM
i. CR = Place cash from ATM into the CDM
ii. GL = Use @statedt1 or @statewu2
1. GL Comment: ATM CASH DEPOSIT WU or DT
iii. GL = Credit O/S of ATM you are balancing
1. GL Comment: ATM Cash Deposit Over
a. DT – Partial Lookup O/S 770
b. WU – Partial Lookup O/S 771
B. Email Payments the Spreadsheet and the Scanned Slips
a. CC your managers because of posting to O/S