Scribd Logo
Upload

Welcome to Scribd!

  • 427 views

    Welding Procedure Specification According To EN ISO 15609, 2004

    Uploaded by

    Dimitris Nikou
    This document provides a welding procedure specification for welding 6mm thick steel plates in the flat position using the 141 welding process. The specification outlines two runs using 1.6mm filler metal with a current of 80-100A, voltage of 10-15V, and heat input of 1.2kJ/cm. Shielding gas is pure argon flowing at 10-15L/min. No preheat or interpass temperatures are required.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Welding Procedure Specification According To EN ISO 15609, 2004

    Uploaded by

    Dimitris Nikou
    427 views2 pages
    This document provides a welding procedure specification for welding 6mm thick steel plates in the flat position using the 141 welding process. The specification outlines two runs using 1.6mm filler metal with a current of 80-100A, voltage of 10-15V, and heat input of 1.2kJ/cm. Shielding gas is pure argon flowing at 10-15L/min. No preheat or interpass temperatures are required.

    Original Title

    WPS-TIG

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a welding procedure specification for welding 6mm thick steel plates in the flat position using the 141 welding process. The specification outlines two runs using 1.6mm filler metal with a current of 80-100A, voltage of 10-15V, and heat input of 1.2kJ/cm. Shielding gas is pure argon flowing at 10-15L/min. No preheat or interpass temperatures are required.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    427 views2 pages

    Welding Procedure Specification According To EN ISO 15609, 2004

    Uploaded by

    Dimitris Nikou
    This document provides a welding procedure specification for welding 6mm thick steel plates in the flat position using the 141 welding process. The specification outlines two runs using 1.6mm filler metal with a current of 80-100A, voltage of 10-15V, and heat input of 1.2kJ/cm. Shielding gas is pure argon flowing at 10-15L/min. No preheat or interpass temperatures are required.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 2

    Welding Procedure Specification According to EN ISO 15609, 2004

    Manufacturer TEI WM WPS No:003


    PQR No:003
    Method of preparation and cleaning: Grinding/Brusing
    Test Pieces
    No. Welding Process Thickness Welding position Joint type Parent metal (specification)
    1 141 6(mm) PB Fillet P235GH

    Weld Preparation Sketch


    Joint Design Welding Sequence

    Type of Wire feed


    Filler metal ø current travel Heat input Metal
    Run Process (mm) Current (A) Voltage (V) polarity (cm/min) (Kj/cm) transfer
    1 141 1.6 80-100 10_15 Dc- N/A 1.2 N/A
    2 141 1.6 80-100 10_15 Dc- N/A 1.2 N/A

    Filler metal W42 5 W3Si 1 (EN-ISO 636-A) Type, Designation, Trade name UNION I 52
    Any special drying or baking N/A Shielding gas Pure Ar Gas flow rate (l/min) 10_15
    Tungsteen electrode type 2% Th /2,4(mm) Deatails of back gouging/backing N/A
    Preheat temperature (°C) N/A
    Interpass temperature (°C) N/A Pulse welding details N/A
    Other information
    Torch angle 45°
    Waving/Oscilation Weaving
    Post Weld Heat Treatment
    Cooling rate
    Method remarks Heating rate (°C/h) Holding time (min) Hold temperature (°C) (°C/h)

    The above test piece was welded in presence of


    Dimitrios Nikou, Tsiamis Ioannis
    Location/ Date of welding Issued by
    Kozani TEI WM
    1/3/2017

    You might also like