Slow start valve standard white series

V3301-W / V3321-W Series JIS symbol

Securing safety at starts and stops.
Port size: Rc1/4 to Rc1/2
1 (P) 2 (A) 1 (P) 2 (A)

3 (R) 3 (R)
V3301 V3321

Specifications
Descriptions V3301-W/V3321-W
Operating method Pilot operated soft spool valve
Working fluid Compressed air (excluding super dry air) Note 1
Working pressure range MPa 0.2 to 1.0
Withstanding pressure MPa 1.5
Ambient temperature range 5 to 60
1 (P), 2 (A) port Rc1/4 Rc3/8 Rc1/2
Port size 3 (R) port Rc3/8
Gauge port Rc1/4
Low speed intake 6
Effective sectional area
High speed intake 40 64 76
mm2
High speed exhaust 50 74 78
Response time 0.2sec or less
Lubrication Oil-free Note 2
Weight g V3301-W: 635 V3321-W: 515
Solenoid valve specification V3301-W
Rated voltage V AC100 (50/60Hz) AC200 (50/60Hz) DC24
Starting current A 0.076/0.058 0.038/0.030
0.092
Holding current A 0.038/0.029 0.019/0.015
Power consumption W 2.2/1.7 2.2/1.7 2.2
Temperature increase K 40 or less
Voltage fluctuation range 10%
Insulation class B class
Electric connection Grommet lead wire, terminal box
Note 1: Contact CKD when using ultra dry compressed air.
Note 2: Use the turbine oil Class 1 ISO VG32 if lubricated. Symbol Descriptions
A Port size
How to order 1 (P), 2 (A) port
08 Rc1/4
Solenoid valve V3301 8 W 1 BW 10 Rc3/8
(White type)
15 Rc1/2
Manual V3321 8 W BW B Manual override
A Port size Blank Non-locking type
B Manual override M1 Locking type
C Electric connection
C Electric connection
Blank Grommet lead wire
S Grommet lead wire with surge supressor
B Terminal box
LS Terminal box surge supressor with lamp
D Voltage
D Voltage
1 AC100V 50/60Hz
Standard
Select the reverse regulator (R*100-W) or reverse filter 2 AC200V 50/60Hz
regulator (W*100-W) when installing the V3301-W or 3 DC24V
V3321-W onto the primary side of the regulator or filter 4 DC12V
regulator. Option
5 AC110V 50/60Hz
6 AC220V 50/60Hz

Specification for LiB production (Catalog No.CC-947) E Attachment

E Attachment
Blank No attachments
Specification for LiB manufacturing process BW C type bracket
G49P Pressure gauge: G49D-8-P10
V3301 - - P4* S Silencer

149
 V3301-W V3321-W Series
Dimensions
Dimensions
V3301-W Bracket: B320

63 67
51
18

50

7
53
(63) 45
Pg9

45
Lead wire
Length 300mm
86

Pressure gauge: G49D-8-P10

137

44
1 (P) 2 (A)

(103)
2-A

ø43.5
3 (R)
B 2-C

A B C
V3301-08-W Rc1/4
V3301-10-W Rc3/8 Rc3/8 Rc1/4
V3301-15-W Rc1/2

V3321-W Silencer: SLW-10A

63
58
50
60

ø25

(63) 45
6
82
133

1 (P) 2 (A)
(103)

2-A
3 (R)
B 2-C

A B C
V3321-08-W Rc1/4
V3321-10-W Rc3/8 Rc3/8 Rc1/4
V3321-15-W Rc1/2

150
 V3301-W / V3321-W Series
Operational explanation (refer to operating principles)
The slow start valve turns on when the solenoid valve is energized or the Operational properties
manual section is set to SUP. The valve turns off when the solenoid valve ON OFF
is deenergized or the manual section is set to EXH. When pressurizing High speed exhaust
(1) First, when the main unit is turned on, the low-speed supply path
Low speed intake High speed intake
opens, and the compressed air starts to flow to the secondary side.
P2=P1

Pressure loss
The secondary pressure gradually starts to rise. The operable
cylinders in the unit will start moving at a low speed and thus will not P2=P1×0.6
pop out.
P2
(2) Next, when secondary pressure exceeds 60% of primary pressure, Switchover secondary pressure
the hight speed supply path opens. Secondary pressure suddenly
rises tot he same pressure as primary pressure. (fully open) Time t
(3) When the main unit is turned OFF, high speed exhaust starts and
residual pressure in the unit is exhausted. Switchover secondary pressure

Switchover secondary pressure

0.6

0.4

0.2
P2
(MPa)
0
0 0.2 0.4 0.6 0.8 1.0
Primary pressure P1 (MPa)

How to adjust slow start function (refer to side view)

(1) Press the slide key up and release the adjustment nut lock. Side view
(2) Turn the main unit on, and confirm the cylinder operation speed and
D
secondary pressure rise time. Then turn the main unit off.
(3) Turn the adjustment nut as explained below, and adjust the state.
Cylinder pops out → Turn to the S side
Low speed operation time is too long → Turn to the O side Padlock
Repeat steps (2) and (3) as necessary, and adjust to the optimum
state. Slide key
(4) Align the adjustment nut keyway to the projection on the slide key.
(5) P ress down the slide key and lock the adjustment nut. Adjusting nut
(6) Confirm that the main unit is off.

Safety precautions
Note 1: T his valve is dedicated for starting and stopping (including
emergency stop) the device. This valve should not be used for
cylinder repeat operation or as a normal 3-way valve.
Note 2: If the minimum operating pressure of the cylinder, which is to be
kept from popping out, is less than 50% of the working pressure,
popping out will not be prevented.
Note 3: The manual override is locked with the manual valve type. Select
a padlock with a D dimension of 3.8 to 5.8 mm.
Note 4: Connect a silencer or exhaust filter, etc., to the exhaust port for
safety and sound absorption.

151