Scribd
Upload
67 views1 page

bn#17 101 Enercalc

This document summarizes the structural analysis of a steel HSS4x4x3/8 post with a 6 foot span subjected to a 1.34 kip seismic point load. The analysis found that the maximum bending stress ratio was 0.353 and the maximum shear stress ratio was 0.025, indicating the selected section is adequate. The maximum deflections were all below the specified limits.

Uploaded by

Bao Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views1 page

bn#17 101 Enercalc

This document summarizes the structural analysis of a steel HSS4x4x3/8 post with a 6 foot span subjected to a 1.34 kip seismic point load. The analysis found that the maximum bending stress ratio was 0.353 and the maximum shear stress ratio was 0.025, indicating the selected section is adequate. The maximum deflections were all below the specified limits.

Uploaded by

Bao Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

File: \\BNSERVER\RedirectedFolders\BNguyen\Desktop\Projects\bn#17-101\bn#17-101.

ec6
Steel Beam ENERCALC, INC. 1983-2011, Build:6.12.4.24, Ver:6.12.4.24
Lic. # : KW-06005589 Licensee : BAKKUM NOELKE STRUCTURAL ENGINEERS
Description : Steel Post

Material Properties Calculations per AISC 360-05, ASCE 7-05


Analysis Method : Allowable Stress Design Fy : Steel Yield : 50.0 ksi
Beam Bracing : Beam is Fully Braced against lateral-torsional buckling E: Modulus : 29,000.0 ksi
Bending Axis : Minor Axis Bending
Load Combination :2006 IBC & ASCE 7-05
E(1.34)

HSS4x4x3/8

Span = 6.0 ft

HSS4x4x3/8

Applied Loads Service loads entered. Load Factors will be applied for calculations. .
Load(s) for Span Number 1
Point Load : E = 1.340 k @ 6.0 ft, (Seismic Point Load)
DESIGN SUMMARY Design OK .
Maximum Bending Stress Ratio = 0.353 : 1 Maximum Shear Stress Ratio = 0.025 : 1
Section used for this span HSS4x4x3/8 Section used for this span HSS4x4x3/8
Mu : Applied 5.628 k-ft Vu : Applied 0.9380 k
Mn / Omega : Allowable 15.943 k-ft Vn/Omega : Allowable 37.027 k
Load Combination +D+0.70E+H Load Combination +D+0.70E+H
Location of maximum on span 0.000ft Location of maximum on span 0.000 ft
Span # where maximum occurs Span # 1 Span # where maximum occurs Span # 1
Maximum Deflection
Max Downward L+Lr+S Deflection 0.000 in Ratio = 0 <360
Max Upward L+Lr+S Deflection 0.000 in Ratio = 0 <360
Max Downward Total Deflection 0.556 in Ratio = 258
Max Upward Total Deflection 0.000 in Ratio = 0 <180

Maximum Forces & Stresses for Load Combinations .


Load Combination Max Stress Ratios Summary of Moment Values Summary of Shear Values
Segment Length Span # M V Mmax + Mmax - Ma - Max Mny Mny/Omega Cb Rm Va Max Vny Vny/Omega
+D+0.70E+H
Dsgn. L = 6.00 ft 1 0.353 0.025 -5.63 5.63 26.63 15.94 1.00 1.00 0.94 61.84 37.03
+D+0.750Lr+0.750L+0.5250E+H
Dsgn. L = 6.00 ft 1 0.265 0.019 -4.22 4.22 26.63 15.94 1.00 1.00 0.70 61.84 37.03
+D+0.750L+0.750S+0.5250E+H
Dsgn. L = 6.00 ft 1 0.265 0.019 -4.22 4.22 26.63 15.94 1.00 1.00 0.70 61.84 37.03
+0.60D+0.70E+H
Dsgn. L = 6.00 ft 1 0.353 0.025 -5.63 5.63 26.63 15.94 1.00 1.00 0.94 61.84 37.03
Overall Maximum Deflections - Unfactored Loads .
Load Combination Span Max. "-" Defl Location in Span Load Combination Max. "+" Defl Location in Span
1 0.0000 0.000 0.0000 0.000
.
Vertical Reactions - Unfactored Support notation : Far left is #1 Values in KIPS
Load Combination Support 1 Support 2
Overall MAXimum 1.340
E Only 1.340

You might also like