Insert Holders • HOLDERS AND ACCESSORIES

Insert Holder
Oseco’s Insert Holder is
designed to bolt between
standard ANSI flanges Insert Holder
The Oseco Insert holder is a reduced diameter flat-faced
flange assembly that bolts between standard ANSI pipe
flanges and fits within the bolt circle. This holder allows the
rupture disc to be pre-assembled to insure it is properly
seated before installation into the pressure system. Insert
• The Oseco FRDI has
Rupture Disc Holders are available in nominal standard ANSI
a special flat seat
arrangement and is flange ratings up to 24". Standard material of construction is
for use with the Oseco 316 Stainless Steel. Other materials are available upon re-
FAS and (F)CO/(F)COV.
quest.

Oseco Insert Holders are offered in three seating arrange-

ments. The type of rupture disc to be used determines which
seating arrangement to specify.

• The Oseco RDI has the

standard 30° angular seat
arrangement and is for use
with the STD/STDV series
and CO/COV series rupture
• The Oseco PRDI has a disc.
special flat seat arrangement
and is for use with the
Oseco PRO +, PCR and PLR.

• PRDI and FRDI holders available in extended

heights for fixed piping applications or safety
relief valve protection.

www.ose co . co m
0 4 11

Contact Oseco at 800-395-3475

or email us at [email protected].
Insert Holders • HOLDERS AND ACCESSORIES

TABLE 1
Pressure/Temperature Rating for Insert-type Rupture Disc Holders
Temp 150 # ANSI 300 # ANSI 600 # ANSI 900 # ANSI 1500 # ANSI 2500 # ANSI
°F A B C A B C A B C A B C A B C A B C
100 285 275 275 740 720 720 1,480 1,440 1,440 2,220 2,160 2,160 3,705 3,600 3,600 6,170 6,000 6,000
200 260 240 235 675 620 600 1,350 1,240 1,200 2,025 1,860 1,800 3,375 3,095 3,000 5,625 5,160 5,000
300 230 215 205 655 560 530 1,315 1,120 1,055 1,970 1,680 1,585 3,280 2,795 2,640 5,470 4,660 4,400
400 200 195 180 635 515 470 1,270 1,030 940 1,900 1,540 1,410 3,170 2,570 2,350 5,280 4,280 3,920
500 170 170 170 600 480 435 1,200 955 875 1,795 1,435 1,310 2,995 2,390 2,185 4,990 3,980 3,640
600 140 140 140 550 450 415 1,095 905 830 1,640 1,355 1,245 2,735 2,255 2,075 4,560 3,760 3,460
650 125 125 125 535 445 410 1,075 890 815 1,610 1,330 1,225 2,685 2,220 2,040 4,475 3,700 3,400
700 110 110 110 535 430 405 1,065 865 805 1,600 1,295 1,210 2,665 2,160 2,015 4,440 3,600 3,360
750 95 95 95 505 425 400 1,010 845 795 1,510 1,270 1,195 2,520 2,110 1,990 4,200 3,520 3,320
800 80 80 80 410 415 395 825 830 790 1,235 1,245 1,180 2,060 2,075 1,970 3,430 3,460 3,280
850 65 65 65 270 405 390 535 810 780 805 1,215 1,165 1,340 2,030 1,945 2,230 3,380 3,240
900 50 50 50 170 395 385 345 790 770 515 1,180 1,150 860 1,970 1,920 1,430 3,280 3,200
950 35 35 35 105 385 375 205 775 750 310 1,160 1,125 515 1,930 1,870 860 3,220 3,120
1000 20 20 20 50 365 325 105 725 645 155 1,090 965 260 1,820 1,610 430 3,030 2,685
LEGEND: A – SA-105 and SA-516-70 Flange Type Holder & All Insert Types
B – SA-182-F316 Flange Type Holders Only
C – SA-182-F304 Flange Type Holders Only
NOTE: Minimum temperature rating for the holder materials listed in the table is (– 20)° F. If a holder is used at a lower temperature, material certified for use
at that temperature must be ordered.

TABLE 2
Pressure/Temperature Rating for Insert-type Rupture Disc Holders
Temp 150 # ANSI 300 # ANSI 600 # ANSI 900 # ANSI 1,500 # ANSI 2,500 # ANSI
°F D E F G D E F G D E F G D E F G D E F G D E F G
100 140 230 275 290 360 600 720 750 720 1,200 1,440 1,500 1,080 1,800 2,160 2,250 1,800 3,000 3,600 3,750 3,000 5,000 6,000 6,250
200 140 200 260 260 360 530 670 750 720 1,055 1,345 1,500 1,080 1,585 2,015 2,250 1,800 2,640 3,360 3,750 3,000 4,400 5,600 6,250
300 140 190 230 230 360 495 640 730 720 990 1,275 1,455 1,080 1,485 1,915 2,185 1,800 2,470 3,190 3,640 3,000 4,120 5,320 6,070
400 140 185 200 200 360 480 615 705 720 955 1,230 1,410 1,080 1,435 1,845 2,115 1,800 2,390 3,070 3,530 3,000 3,980 5,120 5,880
500 140 170 170 170 360 475 595 655 720 950 1,185 1,330 1,080 1,435 1,780 1,995 1,800 2,375 2,965 3,325 3,000 3,960 4,940 5,540
600 140 140 140 140 360 475 575 605 720 950 1,145 1,210 1,080 1,435 1,720 1,815 1,800 2,375 2,870 3,025 3,000 3,960 4,780 5,040
650 - 125 125 125 - 475 565 590 - 950 1,130 1,175 - 1,435 1,690 1,765 - 2,375 2,820 2,940 - 3,960 4,700 4,905
700 - 110 110 110 - 475 555 570 - 950 1,115 1,135 - 1,435 1,670 1,705 - 2,375 2,785 2,840 - 3,960 4,640 4,730
750 - 95 95 95 - 470 530 530 - 935 1,065 1,065 - 1,405 1,595 1,595 - 2,340 2,660 2,660 - 3,900 4,430 4,430
800 - 80 80 80 - 460 510 510 - 915 1,015 1,015 - 1,375 1,520 1,520 - 2,290 2,540 2,540 - 3,820 4,230 4,230
850 - 65 65 65 - 340 485 485 - 680 975 975 - 1,020 1,460 1,460 - 1,695 2,435 2,435 - 2,830 4,060 4,060
900 - 50 50 50 - 245 450 450 - 495 900 900 - 740 1,350 1,350 - 1,235 2,245 2,245 - 2,055 3,745 3,745
950 - - 35 35 - - 325 385 - - 655 775 - - 980 1,160 - - 1,635 1,930 - - 2,725 3,220
1,000 - - 20 20 - - 215 365 - - 430 725 - - 650 1,090 - - 1,080 1,820 - - 1,800 3,030
LEGEND: D – SB-160 Grade N02200 Flange Type Holders Only (NI-200)
E– SB-564 Grade N04400 Flange Type Holders Only (MON-400)
F – SB-564 Grade N06600 Flange Type Holders Only (INC-600)
G– SB-574 Grade N10275 Flange Type Holders Only (HAST C-276)

NOTE: The pressures in the above tables are measured in psig.

0 4 11

Visit the products section of oseco.com to ensure you have the most recent information.

www.oseco.com
 Insert Holders • HOLDERS AND ACCESSORIES
RDI-FRDI-PRDI: Insert Holder Dimensional Data

Size O.D.. Overall Height (inches)

(inches)
ANSI Rating (inches) RDI FRDI FRDI-EH** PRDI PRDI-EH**
1 150 2.5 1.62 1.62 1.75 1.75 1.75
1 300/600 2.75 1.62 1.62 1.75 1.75 1.75
1.5 150 3.25 1.62 1.62 2.75 1.75 2.75
1.5 300/600 3.62 1.62 1.62 2.75 1.75 2.75
2 150 4.0 1.75 1.62 3 1.75 3
2 300/600 4.25 1.75 1.62 3 1.75 3
3 150 5.25 1.75 1.62 3.94 1.93 3.94
3 300/600 5.75 1.75 1.62 3.94 1.93 3.94
4 150 6.75 1.75 1.87 5.63 2.31 5.63
4 300 7.0 2.25 1.87 5.63 2.31 5.63
6 150 8.62 2.25 2.5 8.13 2.81 8.13
6 300 9.75 2.25 2.5 8.13 2.81 8.13
8 150 10.87 2.31* 2.87 10.38 3.43 10.38
10 150 13.25 2.43* 3.12 - - -
12 150 16.0 2.62* 3.62 - - -
*Consult factory: Disc crown height may protrude beyond the rupture disc holder outlet.
**Extended height holder for fixed piping applications or safety relief valve protection.

Let us help you with all your

pressure relief questions.
Contact Oseco at 800-395-3475
or email us at [email protected].

Oseco Inc
1701 W. Tacoma
Broken Arrow Oklahoma 74012 USA
Tel: (918) 258-5626
Fax: (918) 251-2809
0 4 11

Visit the products section of oseco.com to ensure you have the most recent information.

www.oseco.com