TITLE:

AIM:

DATE:

NAME:

MATRICULATION NUMBER:

SERIAL NUMBER:

GROUP:

EXPERIMENT NUMBER:

LEVEL:

COURSE CODE:

INSTRUCTOR’S NAME:
LIST OF FIGURES AND TABLES
TABLE OF CONTENT
INTRODUCTION
The enthalpy of solution, enthalpy of dissolution, or heat of solution is the enthalpy change

associated with the dissolution of a substance in a solvent at constant pressure resulting in

infinite dilution. The enthalpy of solution is one of the three dimensions of solubility analysis.

Solubility is the amount of a particular substance that can dissolve in a particular solvent; it is

usually given in mol/Kg.

For a given solute, the heat of solution is the change in energy that occurs as one mole of the

solute dissolves in a solvent. During the dissolving process, solutes either absorb or release

energy.

If solutes absorb energy from the solvent as they dissolve, the solution gets colder and the

reaction is endothermic. If solutes release energy to the solvent as they dissolve, the solution

gets warmer and the reaction is exothermic. By using a titration method to determine the

solubility and measuring the change in the temperature of the solution during the dissolving

process, we calculated the heat of solution.

Solutions are very common in nature. In order for any reaction to occur there must be a

change in energy. The ease of dissolution is dependent on the temperature of the system and

type of solution, being endothermic or exothermic. Generally, when dissolution occurs, the

entropy of the system increases. It is important to determine the heat of solution (enthalpy

change) this is because a change in enthalpy takes account of energy transferred to the

environment through the expansion of the system under study.

The total enthalpy, H, of a system cannot be measured directly. Thus, change in enthalpy

(AH), is a more useful quantity than its absolute value. The change AH is positive

in endothermic reactions, and negative in exothermic processes. Enthalpy is a thermodynamic

potential. It is a state function and an extensive quantity. The enthalpy is the preferred

expression of system energy changes in many chemical, biological, and physical

measurements, because it simplifies certain descriptions of energy transfer.

range of temperatures and consequently calculate its heat of solution. The experiment was

conducted by using a solution of saturated benzoic acid together with the titration method

using 0.015M NaOH solution and phenolphthalein indicator. This operation was performed at

40 oc, 35 oc, 30 oc and 25 oc by transferring the 250 ml conical flask to each respective

water bath and conducting the titration upon equilibrium. Variables such as temperatures,

initial and final mass as well as the initial and final volumes of the solution before and after

titration, giving rise to the calculation of the solubility of the benzoic acid as well as the

enthalpy of dissolution. Throughout the experiment the initial volume was kept constant at 50

Results show that there is a linear relationship between solubility and temperature. The

solubility of benzoic acid increases as the temperature increase. Tthe heat of reaction was

determined by plotting a graph of log(S/0S) vs I/T. It was found that AHO is -243,7J/kg. Since

AHO has a negative value, indicating that the dissolution of benzoic acid is an exothermic

process. The energy of hydration is much larger than the energies associated with the

breakage of bonds of water molecules and benzoic acid molecules.

analysis. It is the change in enthalpy associated with the dissolution of a solvent at constant

pressure resulting in infinite dilution, thus as one mole of the solute dissolves in the solvent.

In the process, energy can either be absorbed or released; it is expressed in kJ/mol at constant

temperature, with positive values indicating endothermic values and negative values

indicating energy released or exothermic energy. Dissolving a gas in liquid solvent releases

energy, as heat, into the surroundings in an exothermic reaction. The temperature of the

solution decreases as energy leaves the system; therefore solubility of a gas increases with a

decrease in temperature of solution. On the other hand, when the solution is heated, the

reverse reaction occurs and gas evolves. Enthalpy of hydration is one of the most common

types of heat of solution. A substance, commonly a salt is dissolved in water. When

completely dissolved, the heat of solution is at its maximum. Dissolution of a solute can

occur in three steps:

I . Breaking of solute-solute attraction (endothermic)

2. Breaking of solvent-solvent attractions (endothermic)

3. Forming solvent-solute bonds (exothermic)

The sum of the individual enthalpy changes of each step is the overall value of the enthalpy

change. Stronger bonds are formed in solutions with negative enthalpy changes and these

solutions tend to have a lower vapour pressure. A negative enthalpy indicates that a solute is

easily dissolved in the solvent. (Wikipedia enthalpy change of solution; (University, 2005))

Three conditions are fulfilled in the process, as mentioned before, the pressure remains

constant, there is expansion against the atmosphere and work is done, and the temperature

remains constant. The enthalpy of solution is only valid for dissolution of a pure substance

into another pure substance. Enthalpies of solution of most substances can be measured

directly when the resulting solution is liquid. A constant temperature can be maintained if the

solute is dissolved slowly. (Bookrags, 2006)

When a solid is dissolved in a solvent in which it is soluble, it dissolves until saturation is

reached at a certain temperature. It is necessary to determine the amount of solute dissolved

and the nature of solid phase in equilibrium with the solution when performing solubility

measurements. Solubility depends on temperature; it increases with temperature in an

The well-known van't Hoff equation relates the equilibrium constant of a reaction, K, to the

enthalpy change of that reaction, AHO•

d InlC

AHO

RT2

A similar equation can be derived relating the solubility ofa solid to its enthalpy of solution:

din (S/sa) A HO

RT 2

Where S is the solubility in moles per kilogram, I mol/kg, T is the temperature in

degrees Kelvin and AHO is the standard enthalpy of solution. (Department of Chemical

Engineering, 2011
DESCRIPTION OF APPARATUS
The apparatus used during the experimental work were: two 400ml-beakers; one 250ml-

conical flask; one 10ml-pipette, two mercury thermometers; two burettes; two water-baths;

one 1000ml-beaker; four 100ml-conical flask; one 100ml-measuring cylinder and two

hotplates.

The chemicals used to for the experimental work were: solid benzoic acid, sodium hydroxide

pellets, phenolphthalein indicator and water.

A solution of 0.015M of sodium hydroxide (0.3g/500ml) was prepared in a 500ml

beaker.

500ml of water were heated to 500C in a IL beaker on a hotplate.

300ml of water were heated to 800C in a 400ml beaker on a separate plate.

A 250ml saturated solution of benzoic acid, containing excess acid, was prepared at

800C in a 400ml beaker.

150ml of the solution were measured in a measuring cylinder and transferred into a

250ml conical flask.

The flask was placed in the IL beaker with water at 50'C, while stirring the solution

continuously. More solid benzoic acid was added to keep the solution saturated.

When the temperature reached 500C, the flask was transferred to the 400C water-bath.

Once equilibrium was reached, the temperature was recorded and found to be 40.1 oc.

A pipette was used to withdraw 10ml of the benzoic acid solution and drain it into a

100ml conical flask. Three drops of the phenolphthalein indicator were added to the

solution and the weight of the flask with the solution was recorded, 10.18g exactly.

The benzoic acid solution was titrated using the sodium hydroxide solution. Once the

colour of the solution changed to light pink, the volume of sodium hydroxide used

and the mass of the flask after titration were recorded, 28.5ml and 36.77g

respectively.

The 250ml conical flask was transferred to the 350C water-bath, then 10ml were

transferred to the 100ml conical flask each and titration was performed. The same

operation is repeated by transferring the 250ml conical flask to the 30 oc water-bath,

then to the 25 oc water-bath and conduct titration upon equilibrium

The volume of benzoic acid solution used for titration was kept constant (l Oml), the

temperature was varied during the experiment. The mass of flask with solution before and

after titration was recorded, as well as the temperature values and the volume of sodium

hydroxide solution in the burette before and after titration.

http://www.bookrags.com/research/heat-of-solution-woc

Department ofChemical Engineering. (201 1). Practical Manual S4. Durban, KZN, South

Africa: Durban University of Technology.

M, S. J. , Ness, H. V., & Abbott, M. (2003). Introduction to Chemical Engineering

Thermodynamics. In J. Smith, H. V. Ness, & M. Abbott, Introduction to Chemical

Engineering Thermodynamics (pp. 426 - 432). New York: McGraw - Hill.

University, A. (2005). heat of solution. Retrieved August 14, 2011, from

http://•.vvvvv.pulse.pharmacy.arizona.edu/resources/heatofsolution.pdf

Zumdahl, S. A. , & Zumdahl, S. S. (2006). Chemistry. In S. A. Zumdahl, & S. S. Zumdahl,

Chemistry (pp. 489 - 492). Urbana: Houghton Mifflin.

Haase, R. In Physical Chemistry: An Advanced Treatise; Jost, W., Ed.; Academic: New

York, 1971; p 29.

Laidler, K. The World of Physical Chemistry; Oxford University Press: Oxford, 1995; p 110.

C.Kittel, H.Kroemer In Thermal Physics; S.R Furphy and Company, New York, 1980; p246

DeHoff, R. Thermodynamics in Materials Science: 2 ed.; Taylor and Francis Group,

New York, 2006.