Scribd
Upload
444 views

Gallery Structure (Conveyor Design)

1. The document provides load values for structural design calculations for a conveyor belt system, including self weight, live loads, wind loads, and seismic loads. 2. Dead loads are calculated for various components of the conveyor structure and accessories like the belt, idlers, and roof. 3. Live loads include impact load values calculated as percentages of dead loads, as well as allowances for load movement. 4. The document specifies that wind and seismic load values should be referred to standards like ASCE and UBC.

Uploaded by

Dewi Cuantik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
444 views

Gallery Structure (Conveyor Design)

1. The document provides load values for structural design calculations for a conveyor belt system, including self weight, live loads, wind loads, and seismic loads. 2. Dead loads are calculated for various components of the conveyor structure and accessories like the belt, idlers, and roof. 3. Live loads include impact load values calculated as percentages of dead loads, as well as allowances for load movement. 4. The document specifies that wind and seismic load values should be referred to standards like ASCE and UBC.

Uploaded by

Dewi Cuantik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Loading Design

1 D Dead - Selft Weight of structure calculated by STAAD Pro (Y = -1.1 include 10% steel connection

2 L Live - Live loads on conveyor belt = 3.1675


3 PE Dead -
4 PO Dead -
5 PT Dead -
6 Th Live -

7 EE Dead - Weight of belt, with belt width 1.6m = 0.43


- Weight of the carrying idlers = 0.55
- Weight of the returm idlers = 0.14
- Weight of miscleneous (hood or roof) = 0.0396
= 1.16

8 EO Dead - Weight of belt = 0.43


- Weight of the carrying idlers = 0.55
- Weight of the returm idlers = 0.14
- Weight of miscleneous (hood or roof) = 0.0396
= 1.16

9 ET Dead - Weight of belt = 0.43


- Weight of the carrying idlers = 0.55
- Weight of the returm idlers = 0.14
- Weight of miscleneous (hood or roof) = 0.0396
= 1.16

10 I Live For impact load refer to ASCE 7/98

Vertical Load 25% x E (O) = 0.79


Longitudinal Load 20% x E (O) = 0.63
Transverse Load 10% x E (O) = 0.32

11 J Live -
12 WX+ Wind Refer to ASCE
13 WX- Wind Refer to ASCE
14 WZ+ Wind Refer to ASCE
15 WZ- Wind Refer to ASCE
16 EX+ Seismic Refer to UBC or IBC
17 EX- Seismic Refer to UBC or IBC
18 EZ+ Seismic Refer to UBC or IBC
19 EZ- Seismic Refer to UBC or IBC
20 M Live -
21 A Dead -

XX Load Combination Refer to UBC Code


ude 10% steel connection)

kN/m (movment of stringers)

kN/m (with assume 0.46kN/m for Belt Width 1.8m)


kN/m (with assume 0.62kN/m for spacing 1m)
kN/m (with assume 0.155kN/m for spacing 3m)
kN/m (with assume 0.039kN/m with thickness roof 0.5mm)
kN/m Total Dead Load

kN/m (with assume 0.46kN/m for Belt Width 1.8m)


kN/m (with assume 0.62kN/m for spacing 1m)
kN/m (with assume 0.155kN/m for spacing 3m)
kN/m (with assume 0.039kN/m with thickness roof 0.5mm)
kN/m Total Dead Load

kN/m (with assume 0.46kN/m for Belt Width 1.8m)


kN/m (with assume 0.62kN/m for spacing 1m)
kN/m (with assume 0.155kN/m for spacing 3m)
kN/m (with assume 0.039kN/m with thickness roof 0.5mm)
kN/m Total Dead Load

kN/m
kN/m
kN/m
Preliminary Design

D = 118 kg/m
L = 323 kg/m
W = 1428 kg/m
14 kg/cm
Length = 3000 cm
Sx = M/Fb
Fb = 0.66 Fy
= 1584 kg/cm2
Fy = 2400 kg/cm2

M = WL^2/8
= 16,065,045 kg cm
Sx 10,142 cm3

Sx 166,667 cm3
30.000

You might also like